Cisco WAN :: 881W Radius Client Configuration?
Nov 11, 2012
I have been given a new project at work, to configure a 881W for wireless capebilities. how to get it to work using local database for the users to authenticate against, but our goal is to authenticate against a radius server that we have in place for existing Juniper AP's.
I have looked at some documentation out there and I cant seem to find what Im looking for. What I need to find out is an example of how to setup a radius server so that the wireless user can authenticate against. I have found some docs on google but those go over radius server setups for logons to the router etc.
here is what I got so far
Building configuration...
Current configuration : 2005 bytes!version 12.4no service padservice timestamps debug datetime msecservice timestamps log datetime msecservice password-encryption!hostname 881W_AP!logging rate-limit console 9enable secret 5
[Code].....
View 7 Replies
ADVERTISEMENT
Jun 3, 2011
configure AAA (Radius server, access list) There are two devices An access point and cisco 881w. It is necessary to set up authentication through a radius server. You can configure detailed how to do this?
View 3 Replies
View Related
Mar 13, 2012
I have this scenario, AS5510 ver 8.4(3), VPN Client 5.0.07, RADIUS authentication with IAS on Windows 2003 Server.The issue is that, establishing the connection with the VPN Client, if the user credentials are correct every things works fine, but if we introduce a wrong password I don't receive an error message or a again the authentication form.Nothing happens the VPN Client keep trying to "contact security gateway", after about 5 minutes it stops without any message.Debugging the authentication process in the ASA I see that if the password is incorrect the radius authentication response is "reject". I have also tried with a different version of VPN Client but nothing change.Using AnyConnect client every things works fine.
View 1 Replies
View Related
Dec 11, 2011
I'm using an ASA version 8.4.2 and a Radius Server.
Is-it possible to configure ASA for sending the name of the connection profile to the Radius Server ?
By default, the radius server doesn't receive this information.
View 1 Replies
View Related
Oct 30, 2011
I'm using Cisco VPN client 5.0.7 and Cisco ASA 5510 (7.4 and 8.4.2) VPN RAS solution. Clients are authenticated using certificates and AAA RADIUS (ACS 3.3) and AD.Each time, when client connects, ASA issues 2 RADIUS requests, first - correct one which is successfully authenticated by ACS and immediately - second which always fails. I couldn't find any information related to this strange behaivor. "Double authentication" feature (most likeable to its name) is accessible only to Anyconnect clients which we don't use. When I'm authenicated using group password, there is only one RADIUS request.What is the source of such behavior?The negative impact is that my logs are filled with spurious failed auth attempts, and users are incrementig failed attemps counter in AD.
Debug from ASA:
----First request----
RDS 10/24/2011 16:16:01 D 0232 14884 Request from host 172.16.8.1:1645 code=1, id=22, length=145 on port 1025
RDS 10/24/2011 16:16:01 I 2519 14884 [001] User-Name value: user1
RDS 10/24/2011 16:16:01 I 2519 14884 [002] User-Password value: B2 A9 D0 2D 15 5F B8 BB DB 1E 3A 38 F5 24 72 B5
RDS 10/24/2011 16:16:01 I 2538 14884 [005] NAS-Port value: -1072693248
RDS 10/24/2011 16:16:01 I 2538 14884 [006] Service-Type value: 2
[code]....
View 2 Replies
View Related
Feb 6, 2012
I was wondering if i should use the same RADIUS VSA attribute on ACS v5.1 to authenticate AAA clients as those i was using on my old ACS v3.3 server.
Example : under ACS v3.3 i was using RADIUS (Cisco Aironet) attribute to authenticate AP & WLC, should i do the same under ACS v5.1 ?
View 2 Replies
View Related
Jan 9, 2013
i am trying to connect clients to my AP1231 which is running C1200 Software (C1200-K9W7-M), Version 12.3(8)JED. Client authentication is against RADIUS server. [code]
View 3 Replies
View Related
Jun 5, 2012
Configuring radius authentication on Nexus 7k?I have heard once you have configured the radius you are only able to run show commands on it.
View 1 Replies
View Related
Dec 3, 2011
I need to configure RADIUS VSA configuration for a my alvarion device. Following are the attributes that need to be configured.
- Packet Data Flow ID (ID 1, integer16)
- Direction (ID 4, integer8)
- Transport Type (ID 6, integer8)
- UplinkQoSID (ID 7, integer8)
- DownlinkQoSID (ID 8, integer8)
[code]....
I was able to configure the first 6 attributes, how can I add the Sub - TLV's ClassifiedID, Priority, VLAN-ID and Classifier Direction which come under Classifier. Don't see any option for that in ACS 5.x
View 1 Replies
View Related
Jan 24, 2013
I am currently trying to get eap-tls user certificate based wireless authentication working. The mismatch of guides im trying to follow has me coming up trumps with success so far.
My steps for radius:- (i think this part ive actually got ok) [URL]
Steps for the wireless profile on a win 7 client:- this has me confused all over the place [URL]
My 1130 Config:-
[code]
Current configuration : 3805 bytes
!
! Last configuration change at 11:57:56 UTC Fri Jan 25 2013 by apd
[Code].....
View 14 Replies
View Related
Jan 12, 2011
I can't seem to get the SSID RadiusTest to work properly.
Windows PC's show "Windows was unable to find a certificate to log you into the network". Macs don't authenticate either. Radius server isn't seeing any requests at all. Radius server is working because we are authenticating other things to it.
On my test 1231, IOS is 12.3(8) JEB1.
version 12.3
no service pad
service timestamps debug datetime msec
[Code].....
View 2 Replies
View Related
Nov 5, 2009
Is it possible to deploy the CSS11501 in one arm design to loadbalance the authentication traffic Radius across CSACS servers which is on UDP 1645 or 1812 port, is it required to configure the NAT or not, if yes how can define the shared secret in the CSS. also tell me how to configure the keepalive for udp traffic in this scenario other then default icmp keep alive
View 2 Replies
View Related
Apr 21, 2013
I have a couple of ACS 5.2 configured as active and backup and I am doing dot 1x authentication using these servers . I have configured the switch with the bellow configuration.
radius-server host 10.0.10.15 auth-port 1645 acct-port 1646
radius-server host 10.0.10.16 auth-port 1645 acct-port 1646
radius-server key 7 aaaaaaaaaaaaaa
please help to understand what will happen in switch
1) in case of primary failure
2)in case if primary returns alive .
View 8 Replies
View Related
Feb 22, 2013
I came across an interesting issue and thought I would see if anyone else has encountered it before contacting TAC.I have two Cisco Catalyst WS-4510R-E switches with a single Supervisor V module in each chassis. Both Sup cards are now running 12.2(54) SG1; ipbasek9 firmware; yes, I plan to move both switches to 15 code but that's another story. Anyways, prior to the upgrade the one switch was running 12.2 (33) code; I suspect the code was never upgraded; running ipbase non - K9 code. The other switch was running 12.2(44) with K9 prior to upgrade to 12.2(54).
View 2 Replies
View Related
Apr 23, 2012
I have two Cisco Catalyst WS-4510R-E switches with a single Supervisor V module in each chassis. Both Sup cards are now running 12.2(54) SG1; ipbasek9 firmware; yes, I plan to move both switches to 15 code but that's another story. Anyways, prior to the upgrade the one switch was running 12.2 (33) code; I suspect the code was never upgraded; running ipbase non - K9 code. The other switch was running 12.2(44) with K9 prior to upgrade to 12.2(54). With the background set, one switch reports the following:SwitchA (config)#r?radius-server redundancy regexp represourc rmon route-map router.
View 4 Replies
View Related
Mar 22, 2012
I'm using LMS 4.0.1 and VPN hw client 3002 with software 4.7.2.L.I'm not able to collect the first configuration and sync jobs end with these errors.
View 2 Replies
View Related
Apr 12, 2011
I am having a tough time getting my VPN client to reach any devices on my office network. I have a Cisco SR520 configured with IPSec to terminate Cisco VPN client sessions. The client is able to connect successfully. I get a username/password challenge, and then I get assigned a pool IP address on the client computer. So the VPN connection looks good at that point but I cannot reach any devices in the office network.
Config below:
Building configuration...
Current configuration : 8066 bytes
!
! Last configuration change at 06:14:35 PDT Wed Apr 13 2011 by admin
! NVRAM config last updated at 06:17:11 PDT Wed Apr 13 2011 by admin
!
version 12.4
[code]......
View 6 Replies
View Related
Aug 17, 2011
We have many 3002's that we are retiring and want to clear the config, how can this be done, the reset etc, does not do it.
View 4 Replies
View Related
Feb 8, 2012
I want to configurate cisco ipsec vpn client at asa 5505. At my asa the software version is 8.4. Any link or some material to config ipsec vpn client at asa 5505 version 8.4.
View 1 Replies
View Related
May 6, 2012
I purchased a RV042 V03 router with firmware version 4.1.1.01-sp (Dec 6 2011 20:03:18) and I need to create a VPN connection through a remote client. I added a new tunnel in the "Client to Gateway" section, so I created a VPN client access, but connecting remotely by the QuickVPN Client after the connection and testing of the network I get the error "the remote gateway is not respondig, do you want to wait?" and I'm not able to establish a connection to the network. I can provide remote access directly to the router and the IP address to connect remotely.
View 3 Replies
View Related
Oct 12, 2012
I am having issues configuring a vLAN network card on a Debian stable (Squeeze) client.The client is running in a ESXi version 4.1 environment.There are two vLANs: vLAN 8 and vLAN 14. The client is in vLAN 14. The domain controllers (as well as DNS and ISA servers) are in vLAN 8. Windows clients behave fine and they can connect to other vLANs just fine. However, I just can't get the Debian client to connect to any other vLAN than its own.I tried several methods, and non worked successfully thus far.One of the problems is that the client should only use one IP address. Using the vLAN package, its assumed that you have a different IP for each vLAN (I think), so that doesn't work out.There is one other Linux machine in the network. An Ubuntu client being in vLAN 8. That client works as it should and can ping to both local, and other vLANs.Until this problem is fixed, it is impossible to connect to the internet (because the ISA, DNS and DCs are in vLAN 8) so each time I want to install a package, I have to download either the .deb packages manually, or download source tarballs and then create an iso of those files, mount the iso and install the packages. You can imagine how much effort that costs.
View 14 Replies
View Related
Mar 17, 2011
I have DHCP server running in windows 2003. Presently its unable to provide Ip address for VPN clients who connect remotely. What I should do / reconfigure in DHCP, so that the DHCP server provides address for VPN clients.
View 4 Replies
View Related
Feb 28, 2012
We had core(4503), distribution(3750), and access switches(2960) in our environment. Currently we configured the clock manually in each switch, but a reboot of the switch resets the clock also. We are planning to make a single switch as a NTP servers and others are clients to synchronise the correct time even after a reboot of the access switches.
View 6 Replies
View Related
Nov 11, 2010
Any working configuration to connect the iPad VPN-client (IPSEC) to the RV042?
View 16 Replies
View Related
Jul 30, 2012
Windows clients work fine. When loaced from safari in Mac OS, it also works fine. -- If I browse to the url, like vpn.xxx.com/profilename, I can login and anyconnect will start and connect automatically. Only when run from applications > Cisco > Cisco Anyconnect Secure Mobility Client, I will get this failure. Is this a configuration issue?
View 1 Replies
View Related
May 9, 2012
I need to create a Cisco VPN Client connection: I am following the cisco vpn client link and I don't have the command crypto isakmep client configuration group XXXXX
[URL]
This is what I get: crypto isakmp client configuration ? address-pool Set network address for client
This is my show version, if there is an IOS that will work:
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-IK9S-M), Version 12.2(17a), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2003 by cisco Systems, Inc.
[Code].....
View 1 Replies
View Related
Oct 15, 2011
I want to use one arm infrastructure of ACE4710. But I remember it was problem for back end server can not get logging for which client/ip address access the web server.
View 3 Replies
View Related
Dec 17, 2010
I am implementing mGRE with DMVPN so multicast traffic can be delivered to employee homes over Internet, everything worked fine except that I can not configure PIM or ICMP static groups on C881W's mGRE tunnel interface or BVI interface(RIPv2 works on mGRE interface however), configuring "ip multicast-routing" did not give me any errors, do I need license to be about to configure PIM/IGMP? I am running C880data-universalk9.mz.124-20.T5.bin" with license level advsecurity.
View 3 Replies
View Related
Jan 24, 2011
I've got a Cisco 881W Router and I am trying to set up the wireless Network. I've managed to get the SSIDs up and running, but I can't see to get DHCP addresses going from the router to the access point and Laptops .When i am connecting laptop directly to Router ethernet port i am able browse and seeing DHCP address. [code]
View 7 Replies
View Related
Mar 9, 2012
I have an 881W with configuration posted below along with IOS version. The site has a local Exchange server and also a LAN-to-LAN IPSec. Exchange's internal IP is statically NAT'd. Problem is that when that when a static NAT for Exchange is in place, Exchage is not accessible thru tunnel. Scenarios is as below:
Exchange's internal IP: 10.50.80.21Exchange's NAT'd IP: 65.X.X.216IPSec interesting traffic: Local - 10.50.80.0/24, remote - 198.168.189.0/24Static NAT for Exchange in place: Excahgne server can be accessed over Internet. We can RDP in to the
[Code].....
View 2 Replies
View Related
Sep 27, 2012
I'm putting together a design for a new office with the following requirements:
10 VPN users.For Ethernet – 24 ports POE 10/100/1000
Probably go with VZ FIOS so EthernetAbout 2000 square feet so 2 WAP's should do it I'm thinking a CISCO881W-GN-A-K9 ISR with a SRW224G4P-K9-NA switch should do the trick. This will give me an integrated AP but I need a second one. Do I need to order an autonomous one or does the 881W do some sort of WLC function?
View 1 Replies
View Related
Oct 30, 2011
CISCO881W-GN-E-K9 vs. C881W-GN-E-K9. What's the difference between these routers?
For example, the CISCO881G-K9 has a 3.5G ExpressCard Modem and the C881G has an embedded one with GPS and 3.7G in most versions. The C881G is, for all I know, the newer one. But for the two mentioned above, I can't find any differences at all. The C881 is listed in the Teleworking section of the data sheet. But there is no information whatsoever about any feature or license differences.
View 6 Replies
View Related
Jan 17, 2013
We have 15 small branches with Cisco 881w in every office, they use VPN site-to-site to vpn- concentrator on V yatta. I launched cacti monitoring of cisco 881's CPU's Errors, Traffics, Non-uni cast, Uni cast. I see that on 10.00 pm in one brunch when nobody works there, CPU load reaches 50% and traffic rises up to 9mbs.
View 10 Replies
View Related
