Cisco :: LMS 4.0.1 Unable To Collect VPN Client Configuration
Mar 22, 2012I'm using LMS 4.0.1 and VPN hw client 3002 with software 4.7.2.L.I'm not able to collect the first configuration and sync jobs end with these errors.
View 2 Replies
ADVERTISEMENT
Cisco :: LMS 4.2 Not Able To Collect Configuration Or Inventory From WS-SVC-WISM2-K9
May 9, 2012We have just installed lms 4.2 and are having problems collecting config and inventory from ws-svc-wism2-k9. The response from TAC was that this is not supported. And it also says this in
[URL]
Is this really the case ? Will there be released packeges to support this. It would be really useful if this was supported in lms4.2.
Cisco :: LMS 4.0 - Possible To Collect Configuration For Single Device
Jul 28, 2011I'm using cisco LMS 4.0, I've discovered the device and next plan is to collect the device configuration.I would like to know, How I can collect the configuration for single device.What configuration changes required on my LMS & Cisco device.
View 1 Replies View RelatedCisco :: LMS 3.2 Is Able To Collect All Syslog From ASA 5520
Dec 27, 2011I am using LMS3.2, but it is not able to collect running config, and startup config from asa 5520. LMS is able to collect all syslog from asa.
View 4 Replies View RelatedCisco :: LMS 4.0.1 Failed To Collect Inventory From Cat4506-E
Nov 11, 2011There are 3 newly installed Cat4506-E.SSH and SNMPv3 access are verificated. Devices are managable in every way only the inventory is missing.If I try to collect manually then they fail but I can't figure it out why.
View 2 Replies View RelatedCisco Routers :: WRVS440N Did Not Collect Logs
Apr 14, 2013I have turned on 'Local log' and 'output blocking event log' on my WRVS4400N v2 with latest fw.When I am clicking 'view log' button I can't see anything in empty fields. When I am trying to change logs genre I have empty fields all time.
View 1 Replies View RelatedCisco Switching/Routing :: Collect Data About Traffic On 2960S?
Mar 25, 2012How can I collect the data about the traffic on my Cisco 2960S? Have I use only the snmp? Any workaround for simulate a netflow? The IOS c2960s-universalk9-mz.150-1.SE2.bin.
View 2 Replies View RelatedCisco :: 6513 - Network Analysis Module (NAM) Port-adapter Not Collect Data
Sep 20, 2011i have an issue for collect data on adapter 1, that don´t collect data but see that adapter 2 if collect data on module 4.
monitor session 1 source vlan 102 rx
monitor session 1 destination analysis-module 4 data-port 1
monitor session 2 source vlan 106 rx
monitor session 2 destination analysis-module 4 data-port 2
I reconfigured newly monitor and continues with that issue. Always ok by data-port 2.
- show version Cisco 6513
Cisco IOS Software, s72033_rp Software (s72033_rp-ADVENTERPRISEK9_WAN-M), Version 12.2(33)SXH7, RELEASE SOFTWARE (fc3)
. show version NAM
NAM application image version: 3.5(1b)
- sh module
Ports Card Type Model
----- -------------------------------------- ------------------
8 Network Analysis Module WS-SVC-NAM-2
Hw Fw Sw Status
------ ------------ ------------ -------
2.0 7.2(1) 3.5(1b) Ok
Cisco VPN :: SR520 / IOS IPSec With VPN Client Configuration?
Apr 12, 2011I am having a tough time getting my VPN client to reach any devices on my office network. I have a Cisco SR520 configured with IPSec to terminate Cisco VPN client sessions. The client is able to connect successfully. I get a username/password challenge, and then I get assigned a pool IP address on the client computer. So the VPN connection looks good at that point but I cannot reach any devices in the office network.
Config below:
Building configuration...
Current configuration : 8066 bytes
!
! Last configuration change at 06:14:35 PDT Wed Apr 13 2011 by admin
! NVRAM config last updated at 06:17:11 PDT Wed Apr 13 2011 by admin
!
version 12.4
[code]......
Cisco WAN :: 881W Radius Client Configuration?
Nov 11, 2012I have been given a new project at work, to configure a 881W for wireless capebilities. how to get it to work using local database for the users to authenticate against, but our goal is to authenticate against a radius server that we have in place for existing Juniper AP's.
I have looked at some documentation out there and I cant seem to find what Im looking for. What I need to find out is an example of how to setup a radius server so that the wireless user can authenticate against. I have found some docs on google but those go over radius server setups for logons to the router etc.
here is what I got so far
Building configuration...
Current configuration : 2005 bytes!version 12.4no service padservice timestamps debug datetime msecservice timestamps log datetime msecservice password-encryption!hostname 881W_AP!logging rate-limit console 9enable secret 5
[Code].....
Cisco VPN :: How To Wipe Out Configuration Of 3002 Hardware Client
Aug 17, 2011We have many 3002's that we are retiring and want to clear the config, how can this be done, the reset etc, does not do it.
View 4 Replies View RelatedCisco VPN :: Configuration IPSec Client At ASA 5505 Version 8.4
Feb 8, 2012I want to configurate cisco ipsec vpn client at asa 5505. At my asa the software version is 8.4. Any link or some material to config ipsec vpn client at asa 5505 version 8.4.
View 1 Replies View RelatedCisco Routers :: RV04 V03 VPN Client Access Configuration?
May 6, 2012I purchased a RV042 V03 router with firmware version 4.1.1.01-sp (Dec 6 2011 20:03:18) and I need to create a VPN connection through a remote client. I added a new tunnel in the "Client to Gateway" section, so I created a VPN client access, but connecting remotely by the QuickVPN Client after the connection and testing of the network I get the error "the remote gateway is not respondig, do you want to wait?" and I'm not able to establish a connection to the network. I can provide remote access directly to the router and the IP address to connect remotely.
View 3 Replies View RelatedVLAN Configuration On Debian Client In ESXi 4.1
Oct 12, 2012I am having issues configuring a vLAN network card on a Debian stable (Squeeze) client.The client is running in a ESXi version 4.1 environment.There are two vLANs: vLAN 8 and vLAN 14. The client is in vLAN 14. The domain controllers (as well as DNS and ISA servers) are in vLAN 8. Windows clients behave fine and they can connect to other vLANs just fine. However, I just can't get the Debian client to connect to any other vLAN than its own.I tried several methods, and non worked successfully thus far.One of the problems is that the client should only use one IP address. Using the vLAN package, its assumed that you have a different IP for each vLAN (I think), so that doesn't work out.There is one other Linux machine in the network. An Ubuntu client being in vLAN 8. That client works as it should and can ping to both local, and other vLANs.Until this problem is fixed, it is impossible to connect to the internet (because the ISA, DNS and DCs are in vLAN 8) so each time I want to install a package, I have to download either the .deb packages manually, or download source tarballs and then create an iso of those files, mount the iso and install the packages. You can imagine how much effort that costs.
View 14 Replies View RelatedCisco VPN :: Unable To SIP Through ASA 5510 Client>
Feb 24, 2012I have configured VPN client on my ASA 5510,
I am trying now to telnet my call manager on port 5060 and on port 2000.
When i am connected localy i am able to telnet both ports, but when i am trying to connect through cisco VPN client i am able to telnet the port 2000 and not able to telnet 5060. Both ports are on the same call manager.
When using windows VPN i am able to telnet both ports.
if i removed inspect SIP from: policy-map global_policy class inspection_default
DHCP Configuration To Provide Address For Remote VPN Client?
Mar 17, 2011I have DHCP server running in windows 2003. Presently its unable to provide Ip address for VPN clients who connect remotely. What I should do / reconfigure in DHCP, so that the DHCP server provides address for VPN clients.
View 4 Replies View RelatedCisco Switching/Routing :: 2960 NTP Server / Client Configuration In Switches
Feb 28, 2012We had core(4503), distribution(3750), and access switches(2960) in our environment. Currently we configured the clock manually in each switch, but a reboot of the switch resets the clock also. We are planning to make a single switch as a NTP servers and others are clients to synchronise the correct time even after a reboot of the access switches.
View 6 Replies View RelatedCisco Routers :: Working Configuration To Connect IPad VPN-client To RV042
Nov 11, 2010Any working configuration to connect the iPad VPN-client (IPSEC) to the RV042?
View 16 Replies View RelatedCisco VPN :: AnyConnect 3.0.08057 Failed To Get Configuration From Secure Mobility Client
Jul 30, 2012Windows clients work fine. When loaced from safari in Mac OS, it also works fine. -- If I browse to the url, like vpn.xxx.com/profilename, I can login and anyconnect will start and connect automatically. Only when run from applications > Cisco > Cisco Anyconnect Secure Mobility Client, I will get this failure. Is this a configuration issue?
View 1 Replies View RelatedCisco VPN :: Missing Client Configuration Group Command - Old 2600 Router
May 9, 2012I need to create a Cisco VPN Client connection: I am following the cisco vpn client link and I don't have the command crypto isakmep client configuration group XXXXX
[URL]
This is what I get: crypto isakmp client configuration ? address-pool Set network address for client
This is my show version, if there is an IOS that will work:
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-IK9S-M), Version 12.2(17a), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2003 by cisco Systems, Inc.
[Code].....
Cisco Application :: ACE 4710 Configuration - Client / IP Address Access For Web Server
Oct 15, 2011I want to use one arm infrastructure of ACE4710. But I remember it was problem for back end server can not get logging for which client/ip address access the web server.
View 3 Replies View RelatedCisco :: 871w - Unable To Connect Using VPN Client
Aug 21, 2012Below is my VPN config in my 871 and radius user config. I am unable to connect to the vpn using Cisco vpn client. I am getting one of two errors depending on what config changes I make.I believe I have the radius configured correctly because it is authentication but not 100% sure.
[code]...
Unable To Access Internet After Connecting To VPN Using Cisco VPN Client?
Aug 4, 2011On my Windows 7 laptop, after connecting to my office Network using Cisco VPN clientThe entire Internet is utilized by the VPN. I am unable to browse the internet on my computer till I disconnect the VPN Client.
View 3 Replies View RelatedCisco Firewall :: 5505 VPN Client Unable To Connect
Feb 13, 2012We have a cisco asa 5505 on which we have setup a group VPN. The VPN connections from all cisco vpn clients works fine except one. The keep getting the below error
"Secure VPN Connection terminated locally by the client. Reason 412: The remote peer is no longer responding. Connection Terminated".
Not sure why only one client won't be able to connect. The version we are using is 5.0.02 for VPN client.
Cisco VPN :: ASA5510 Unable To Connect VPN With Anyconnect Client
Mar 31, 2011we have ASA5510 with version 7.x and asdm 5.X, i upgraded it to 8.3 and asdm 6.2, and i got vpn peers 250 and 2 ssl.when i try to connect through client software , i can see in the logs UDP 500 port is created as shown below. [code]
and currently in right panel of Active Algorithms i have only RC4-SHA1,
Cisco VPN :: ASA 5510 / VPN Client Unable To Add Routes In Windows 7
May 23, 2012Having an issue with the ipsec client being unable to add routes in Windows 7 while connecting to an asa 5510 running 8.3(2). Client connects, but the split-tunnel routes do not get installed on the OS. Vpn client versions used are 5.0.07.0290 and 5.0.07.0440 x64. The client status window shows that it received the split tunnel networks, but the log shows that the routes do not get installed with the following message:
Sev=Warning/2 CVPND/0xE3400013
AddRoute failed to add a route with metric of 100: code 87
Destiantion 192.168.100.0
Netmask 255.255.252.0
Gateway 0.30.1.1
Interface 10.30.1.201
[code].....
Cisco Routers :: Unable To Access LAN Behind RV042 From Quick VPN Client?
Aug 22, 2011Very recently, we had implemented Site-to-Site VPN tunnel between two Linksys RV042 4-port VPN routers. Everybody in our remote site is accessing and sharing the data through this tunnel and it is working fine.
Now, we have a plan to implement the same for our mobile clients also. For this, we had followed all the basic configuration procedures and user got connected to Quick VPN tunnel. Here is a problem we had observed. The mobile client user is connected to the tunnel, but unable to access the office LAN from the PC.
Cisco VPN :: 861 Easy VPN Software Client Unable To Access Few Networks
Feb 19, 2013I have access to network 10.3.1.0 /24 but I am not able to access 10.3.2.0/24 and other networks behind the Easy VPN server.I am using a software client to connect to the server.I have configured split tunnel to the network 10.3.0.0 /16 and it shows up in the route details too. I can ping 10.3.1.0 network but not 10.3.2.0 and so on.The Easy VPN server is configured on Cisco 861 with VPN module. [code]
View 6 Replies View RelatedCisco VPN :: 5520 / Unable To Use Proxy Server With MAC OS X Anyconnect Client?
Dec 13, 2012I have a VPN setup thru a Cisco 5520, Windows clients connect just find and the end users configure there browser to use our internal proxy servers. Users with the MAC OS X Anyconnect client can connect, they configure their Mac to use our proxy server, but the broswers will not work, clients can reach networks and resources behind the VPN gateway and have access to the Proxy(Tried a telnet to that hostname/port). I am running ASA 8.3(2), Anyconnect(OS X) 3.1.01065.
View 3 Replies View RelatedCisco VPN :: 5510 Unable To Access Secondary Subnet From VPN Client
Jun 5, 2012I have an ASA 5510 running v8.4(3)9 and have setup a remote user VPN using the Cisco VPN client v5.0.07.0410 which is working appart from the fact that I cannot access resources on a secondary subnet.The setup is as follows:
-ASA inside interface on 192.168.10.240
-VPN clients on 192.168.254.x
I can access reources on the 192.168.10 subnet but not any other subnets internally, I need to specifically allow access to the 192.168.20 subnet,[code]
Cisco VPN :: 2911 - Unable To Access LAN Using Client Tunnel To Router
Sep 4, 2011I recently purchased a Cisco 2911 to replace my Cisco 1711 router. I copied the configuration from the Cisco 1711 router to the Cisco 2911 router. Everything seemed to work correctly except when I VPN tunnel into the Cisco 2911 router using Cisco's VPN client version 5.0. I can ping the router LAN interface from my PC that is VPNed into the router but I can no longer ping or access the devices on the LAN side of the router as I did on the Cisco 1711 router. I don’t see errors in the log or hits blocking anything in the acls. It’s using the same configuration that I had on the Cisco 1711 router, and this did work on the Cisco 1711. The Cisco 2911 router is running IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.0(1)M1, RELEASE SOFTWARE (fc1).
Here is the VPN clinet portion of the configuration: The LAN is addressed as 192.168.0.0/24. The router LAN interface is 192.168.0.1, which I can ping and access. I can't ping or access anything on the LAN (192.168.0.0/24) beside the router.
aaa authentication login vpnclientauth local
aaa authorization network vpngroupauth local
!
crypto isakmp client configuration group remote-clients
key 6 xxxx
pool clients
[Code]....
Cisco Wireless :: 5508 - Client Unable To Stay Connected
Jun 26, 2012Background: Wireless credit card machines can't stay connected to the 5508 controller 7.0.116 / 1142 ap wireless system. MAC address of one of the wireless hosts is 00:12:0e:ec:ce:97. AP servicing them is d4:a0:2a:99:34:60. Hosts are able to connect to the network after a reboot and stay connected for random periods of time but then don't come back unless you manually reload them. I have 3 in total in the same room services by the same ap.
I have the output of debug client 00:12:0e:ec:ce:97. Output showed 802.1x 'timeoutEvt' Timer expired for station 00:12:0e:ec:ce:97 so I increased the value to 4000ms on the controller but am still having the issue.
Note that the output below is the state the client stays in after receiving the timeout (802.1x 'timeoutEvt') showing subsequent attampts. The only way to get them back on is a reload of the credit card machine.
[Code]........
Cisco Wireless :: 2504 Client Unable To Get IP Address On Guest Wlan
Feb 23, 2013I recently setup a 2504 WLC that has two primary WLANs (internal and guest) which get their IP addresses from a central DHCP server using the local router's broadcast forwarding. Things seem to be working well for the internal wlan, but clients on the guest wlan don't seem to be getting IP addresses. If I give the client a static IP they are able to communicate across the wlan okay.
It is worth noting that I am using LAG between the controller and router and this guest wlan is really just a regular wlan (with PSK) that has an access-list applied to force it to the internet only. The access-list should be allowing dhcp requests through, but in any case, I removed the access-list and it made no difference.
Here is a debug client for a machine connected to the guest vlan (vlan 33). The internal wlan is on the 10.10.10.0/24 network (same as wired and same that the AP's are connected to) and the guest wlan is 10.33.0.0/16. I don't understand why I am seeing the dhcp request come from the internal vlan/ wlan first and it gets an IP address on this network. I then see a request on the guest wlan/vlan at which point it appears to get a valid IP address on the guest network (10.33.0.0), but the client never sees this. [code]