VLAN Configuration On Debian Client In ESXi 4.1
Oct 12, 2012
I am having issues configuring a vLAN network card on a Debian stable (Squeeze) client.The client is running in a ESXi version 4.1 environment.There are two vLANs: vLAN 8 and vLAN 14. The client is in vLAN 14. The domain controllers (as well as DNS and ISA servers) are in vLAN 8. Windows clients behave fine and they can connect to other vLANs just fine. However, I just can't get the Debian client to connect to any other vLAN than its own.I tried several methods, and non worked successfully thus far.One of the problems is that the client should only use one IP address. Using the vLAN package, its assumed that you have a different IP for each vLAN (I think), so that doesn't work out.There is one other Linux machine in the network. An Ubuntu client being in vLAN 8. That client works as it should and can ping to both local, and other vLANs.Until this problem is fixed, it is impossible to connect to the internet (because the ISA, DNS and DCs are in vLAN 8) so each time I want to install a package, I have to download either the .deb packages manually, or download source tarballs and then create an iso of those files, mount the iso and install the packages. You can imagine how much effort that costs.
View 14 Replies
ADVERTISEMENT
Aug 12, 2012
We have 6509 VSS with FWSM Module and we have created two context on it, one is INTERNALL CONTEXT othe is EXTERNALL Context? We have spanned various VLANS in switches and FWSM context level. All VLAN Gateways are configured in context level.
Activity description : We had planned migration of these devices into a new Datacenter, it was a planned activity. During migration of devices from one Dc to a new DC we broke the VSS and kept the primary running and removed the secondary switch and migrated this secondary to new DC and powered this device ON in the new DC and checked all the config was very much fine but this device was OFF network as secondary was brought to new DC just to limit the downtime during the primary switch movement.
During the activity ( Primary switch movement )We powered off the Primary switch and mean time before shifting into new Data center We had brought up secondary switch which was already existing in the DC was put live in the network and it was working fine without any issues.
Later we had moved Primary into new data center and tried to put into VSS with the secondary , during this period the secondary device into went into RECOVERY MODE and primary device was not responding and devices went off network and immediatly we removed the VSL link and brought up primary into production network without secondary online in the network ( Without VSS just stand alone switch ) network started working, but bringing up the primary we found that some of the VLANS in the FWSM was deleted and some VLAN had misconfiguration ( example : say original VLAN ip 10.200.112.1 has become 10.300.13.1 ) also some of the access list as well as SVI was deleted making configuration mismatch.
Wanted to know while syncronization b/n primary and secondary switch in VSS if we pull out VSL link would create this type of issues.
View 1 Replies
View Related
Jul 15, 2011
I set up my new Linksys E3200 via hardwired Win XP box on small home network that uses a dsl line. I attached a Seagate Expansion 2TB usb hd to the router. All is well. After rebooting into Debian Linux via dual boot setup, I have a working internet connection but am unable to find the attached usb hard drive. What can I do to make it visible to this and other, linux systems?
View 5 Replies
View Related
Apr 21, 2012
recently i have install asa 5520 (8.2) in my networks.Earlier I was using my transparent proxy with 2821 by the following configuration access-list 120 deny ip host 192.168.112.12 anyaccess-list 120 permit tcp any any eq wwwaccess-list 120 deny ip any any route-map PROXY-REDIRECT permit 10match ip address 120set ip next-hop 192.168.112.12 ip policy route-map PROXY-REDIRECT and was working fine. How i can use my transparent proxy with ASA?
View 2 Replies
View Related
Nov 17, 2012
I have a Cisco/Linksys E2500 router. I connected to it through one of the Ethernet ports with a Microsoft Windows XP Pro machine and installed and ran the setup software. Windows was able to connect to the router and to the internet through the Siemens Gigaset 4300 DSL modem to my internet provider, Windstream.I cannot get my Dell GX620 which is running Linux Debian 6 (Squeeze) to connect to the router through the Ethernet ports.It appears that I receive no reply to the DHCP requests made by Linux.
I have only one monitor, keyboard and mouse and no KVM switch to run both the machines at once. I do have Windows XP Pro running in a VirtualBox virtual machine on the Debian machine,I can configure Debian to a static IP if I knew all of the IP configuration that the E2500 would assign. I would also need to know what reconfiguration the router requires if I use a static IP.
View 1 Replies
View Related
Jan 4, 2012
Is there any roadmap regarding the LMS virtual appliance to be supported on ESXi 5?
View 0 Replies
View Related
Jan 8, 2013
I am setting up a 3 host ESXi cluster. I am using a pair of stacked SG500-28 switches for switching redundancy. Each host has 8 NICs. 4 to each switch. I have successfully setup a 3 NIC LAG with 1 path to one switch and 2 paths to the other. These LAGs work. When I setup a 2NIC LAG via the console for management, and the associated ports on the switches, I lose managment communication with the host. Before setting up the LAG in the ESXi console, I set that vswitch properties to us IPHASH as instructed here bit.ly/VLaTEt I have attempted to follow those instructions as closely as possible. The one thing that I am wondering is whether the SG series supports etherchannel. I can't find any reference. Either way, it works on the other vswitch that is for vMotion. I can vmkping between the hosts over that LAG. But setting up a LAG on the management vSwitch doesn't?
View 5 Replies
View Related
Apr 11, 2012
I have a very unusual issue with my installation of ISE on my VMWare ESXi 5.0 environment. but whenever I issue the command "show application statuse ise" I get the following output:
ISE Database listener is running, PID: 13675
ISE Database is running, number of processes: 27
ISE Application Server is running, PID: 15163
ls: /opt/TimesTen/tt1121/lib/*.jar: No such file or directory
ISE M&T Session Database is not running.
ls: /opt/TimesTen/tt1121/lib/*.jar: No such file or directory
ISE M&T Log Collector is running, PID: 15379
ls: /opt/TimesTen/tt1121/lib/*.jar: No such file or directory
ISE M&T Log Processor is running, PID: 15457
ls: /opt/TimesTen/tt1121/lib/*.jar: No such file or directory
ISE M&T Alert Process is running, PID: 15296
View 6 Replies
View Related
Mar 4, 2013
Does PI Supports VMware ESXi 5.1 freeware version?
View 1 Replies
View Related
Dec 9, 2012
I am running PI1.2 virtual appliance (on ESXi 5.0). i had some issues and open a ticket to TAC. the TAC engineer requested me to send him the below:
/opt/CSCOlumos/logs/failed_inventory_feature.log
/opt/CSCOlumos/logs/ifm_inventory.log
.
.
My question is how do we get to the shell of PI1.2? i know we can get to the shell of LMS4.2. do we have access to shell of PI1.2 virtual appliance?
View 5 Replies
View Related
Apr 2, 2013
I have a 2811 Router (config below) with VPN configured. I can connect through the VPN and access devices on the native VLAN but I can't access the 10.77.5.0 (VLAN 5) network (I don't care to access the 10.77.10.0 - VLAN 10 network). This issue has been plagueing me for quite a while. I believe it's a NAT or ACL issue. VPN client IP pool is 192.168.77.1 - 192.168.77.10. [code]
View 4 Replies
View Related
Dec 6, 2011
I am trying to configure get the QLogic 8240 card to work properly in ESXi 5.0. I want to be able to send the iSCSI traffic down the iSCSI portion of the card and use the ethernet portion of the card to do NFS.
Here are my vlans I am working with..
vlan 420 = fcoe
vlan 500 = NFS
vlan 1000 = iSCSI
I have my interface currenly set as the following on the Nexus 5000.
interface Ethernet1/17
[Code]...
View 5 Replies
View Related
Jan 11, 2012
Just trying to figure out how LAP manage clients in a h-reap setup.Have a setup with native vlan on 144 (switch and AP) and ssid tagging in other vlan... Got this on switch:
Jan 12 10:31:43.121: %PORT_SECURITY-2-PSECURE_VIOLATION: Security violation occurred, caused by MAC address 0811.9695.9b04 on port FastEthernet0/42.
Jan 12 10:31:43.121: %PORT_SECURITY-2-PSECURE_VIOLATION_VLAN: Security violation on port FastEthernet0/42 due to MAC address 0811.9695.9b04 on VLAN 144
Jan 12 10:37:42.770: %PORT_SECURITY-2-PSECURE_VIOLATION: Security violation occurred, caused by MAC address 0811.9695.9b04 on port FastEthernet0/42.
Jan 12 10:37:42.770: %PORT_SECURITY-2-PSECURE_VIOLATION_VLAN: Security violation on port FastEthernet0/42 due to MAC address 0811.9695.9b04 on VLAN 144
Wonder why clients MAC is seen on native vlan (and ofcourse also on taged vlan) ...?
View 4 Replies
View Related
Feb 13, 2013
I would like to get using of course SNMP, list of client IPs connected to VLAN in Cisco Catalyst 3600.So far, I have pseudo-algorithm made by me which obtains those IP addresses, but I am not sure if this is done in right way :
1) Receive all IP addresses from Catalyst using oid 1.3.6.1.2.1.4.20.1.2. I get something like :
IP-MIB::ipAdEntIfIndex.10.10.2.1 = INTEGER: 152
IP-MIB::ipAdEntIfIndex.10.10.2.251 = INTEGER: 152
IP-MIB::ipAdEntIfIndex.10.10.3.251 = INTEGER: 151 and so on.
2) Get ifIndex of VLAN (oid 1.3.6.1.2.1.4.20.1.2.10.10.2.1.<IP_ADDRESS>) for particular IP address from above list :
IP-MIB::ipAdEntIfIndex.10.10.2.1 = INTEGER: 152
IP-MIB::ipAdEntIfIndex.10.10.2.251 = INTEGER: 152
IP-MIB::ipAdEntIfIndex.10.10.3.251 = INTEGER: 151
3) Get VLAN name (oid 1.3.6.1.4.1.9.9.46.1.3.1.1.4.1.<IF_INDEX>) If_index is borrowed from list above :
IP-MIB::ipAdEntNetMask.152 = No Such Instance currently exists at this OID
IP-MIB::ipAdEntNetMask.151 = No Such Instance currently exists at this OID
In the third step I have this problem, that instance can not be found in OID. It is weird, because for about forty IP addresses i can find about their 10 VLAN names to which they are connected.
View 1 Replies
View Related
Sep 11, 2011
The 5508 is running code 7.0.116.0. I have created a group interface for 3 subnets and assigned the group to the WLAN. Clients are getting IP addresses in a round robin fashion. The issue or downside to this is if the lease has not expired before the next time the station connects to the WLAN it consumes an address on another subnet instead of grabbing the unexpired lease IP address on it's previous VLAN. It seems that the WLC determines the VLAN in the interface group before the DHCP request from the client in case the client already received a DHCP address that has not expired. This can be problematic since we have seen some iPhones requesting an address every 20 minutes thus consuming an address on every subnet in the interface group. Other than setting a lease time extremely low what can be done to address this?
View 1 Replies
View Related
Jun 26, 2012
1 Cisco switch stack (SGE2010) in L3 mode, 2 Vlans.
Vlan 1 = 192.168.0.253/24, untagged on all ports except 14/15
Vlan 2 = 192.168.22.1/24, untagged on port 14 and 15
SGE2010 default route 0.0.0.0/0 next hop 192.168.0.1 (Checkpoint UTM)
DHCP Relay enabled
DHCP server set to 192.168.0.16
DHCP interface set to Vlan2
[code]....
Expanding the ICMP entry, it appears that the destination is the pc client since it shows a Dell mac address, and the source is the Checkpoint UTM (Sofaware).
I can ping and tracert from the Checkpoint to my static IP on Vlan 2. The same goes for the DHCP server to/from Vlan2, so I am confused as to why the routing is failing. I have tried adding Port Fast to the stack ports, but nothing changes.
View 3 Replies
View Related
Sep 20, 2012
I have a question regarding fabric storage and cisco catalyst switch 3650.My plan is connecta a esxi server to a nexus switch and then to a san storage. I want add a new switch to have a redundant link between esxi and the storage.Can I use a cisco catalyst 3650 with a fiber conecction to connect the HBA esxi server card to 3650 sw and the SAN storage to the 3650 sw ?
View 2 Replies
View Related
Jan 14, 2013
I'm working at a company that has several 6509 switches running CatOS. They have two of the 6509's running in vtp server mode and the rest as clients. I set up a new vlan from one of the vtp servers and it propagated out. The problem comes when I try to assign a port on one of the vtp clients to this new vlan. It gives me an error that the switch must be in vtp server mode to add/delete vlans. I'm not trying to add/or delete a vlan just trying to add a port into an existing vlan. I'm hesitant to put the switch in vtp server mode. Is this a CatOS thing or is there a specific command to accomplish this?
View 5 Replies
View Related
Mar 22, 2012
I'm using LMS 4.0.1 and VPN hw client 3002 with software 4.7.2.L.I'm not able to collect the first configuration and sync jobs end with these errors.
View 2 Replies
View Related
Apr 12, 2011
I am having a tough time getting my VPN client to reach any devices on my office network. I have a Cisco SR520 configured with IPSec to terminate Cisco VPN client sessions. The client is able to connect successfully. I get a username/password challenge, and then I get assigned a pool IP address on the client computer. So the VPN connection looks good at that point but I cannot reach any devices in the office network.
Config below:
Building configuration...
Current configuration : 8066 bytes
!
! Last configuration change at 06:14:35 PDT Wed Apr 13 2011 by admin
! NVRAM config last updated at 06:17:11 PDT Wed Apr 13 2011 by admin
!
version 12.4
[code]......
View 6 Replies
View Related
Nov 11, 2012
I have been given a new project at work, to configure a 881W for wireless capebilities. how to get it to work using local database for the users to authenticate against, but our goal is to authenticate against a radius server that we have in place for existing Juniper AP's.
I have looked at some documentation out there and I cant seem to find what Im looking for. What I need to find out is an example of how to setup a radius server so that the wireless user can authenticate against. I have found some docs on google but those go over radius server setups for logons to the router etc.
here is what I got so far
Building configuration...
Current configuration : 2005 bytes!version 12.4no service padservice timestamps debug datetime msecservice timestamps log datetime msecservice password-encryption!hostname 881W_AP!logging rate-limit console 9enable secret 5
[Code].....
View 7 Replies
View Related
Aug 24, 2012
I'm adding it to an existing infastructure, with multiple VLANs. I believe I have it set up correctly, however whenever I daisy-chain the switch in with the trunk ports, it's not passing the VLAN info correctly. There's not a lot of configuguration involved, so I'm not quite sure where I might be going wrong. I've attached a couple screenshots that show my trunk port configuration.
View 3 Replies
View Related
May 2, 2013
I have been trying to setup vlans on a SG300-28p but they are not working. This is my setup: I want Switch1 to have ports 1-10 to access the DMZ, and 11-24 the LAN. Then i wan to add switch2-4 to extend the access to LAN.
i tested with cisco 2960 switches by just telling what ports whould have access to DMZ and LAN but the small business switches are different..
View 1 Replies
View Related
Mar 17, 2011
I have DHCP server running in windows 2003. Presently its unable to provide Ip address for VPN clients who connect remotely. What I should do / reconfigure in DHCP, so that the DHCP server provides address for VPN clients.
View 4 Replies
View Related
Aug 17, 2011
We have many 3002's that we are retiring and want to clear the config, how can this be done, the reset etc, does not do it.
View 4 Replies
View Related
Feb 8, 2012
I want to configurate cisco ipsec vpn client at asa 5505. At my asa the software version is 8.4. Any link or some material to config ipsec vpn client at asa 5505 version 8.4.
View 1 Replies
View Related
May 6, 2012
I purchased a RV042 V03 router with firmware version 4.1.1.01-sp (Dec 6 2011 20:03:18) and I need to create a VPN connection through a remote client. I added a new tunnel in the "Client to Gateway" section, so I created a VPN client access, but connecting remotely by the QuickVPN Client after the connection and testing of the network I get the error "the remote gateway is not respondig, do you want to wait?" and I'm not able to establish a connection to the network. I can provide remote access directly to the router and the IP address to connect remotely.
View 3 Replies
View Related
Apr 22, 2012
Before I launch into this can I say that I am very much a novice with regards to Managed Switches and their configuration. I have the following equipment which I have connected to the switch: [code] All of the above are on subnet 255.255.255.0.All of the above communicate with each other during normal operation.Our client is connecting to the switch but his requirement is for his system to "see" the PLC Comms Card as follows:IP: 10.0.3.61 on Subnet 255.255.252.0 .
Using the Internet Explorer interface connection I have created an additional VLAN (ID 2) on Port 10 with the intention of using this as the connection to the client ( I assume there will be further settings required to route the PLC connection to this port) but every time I try to assign the IP and Subnet values and click "APPLY" the changes are not made and the connection appears to hang leading me to reboot the switch.I have connected to the switch via console and changed the mode to Layer 3. I also assume that it is OK for the three pieces of equipment to remain on the default VLAN. How I should setup this VLAN and ultimately achieve my goal.
View 5 Replies
View Related
Oct 10, 2012
i need to configure a new ASA 5515-X with a 3 trunk port for vlans that become from switch, but i need turn on IPS in in-line mode, somebody has an example and limitations for this configuration type?
View 3 Replies
View Related
Jan 17, 2012
we're planning a small private network for our holiday appartments. Therefore we get a Cisco Small Buisiness Switch SG200-18 from a friend. We have created 6 diffrent VLANs on it. But it seems that we need a router do to the routing of our cable connection to the WAN. Is it possible to connect the WRVS4400N to that switch and configure multiple subnets for that vlans? Or how can i do that? I have add a drawing for better understanding.
View 3 Replies
View Related
Aug 13, 2012
I'm new to managed networking. So I'm having trouble understanding how to set up my switches properly. I have a closed network with about 20 switches and 2 IDF's. No router, and no internet. I have a SLM 2024 in want to have 4 ports set up with a VLAN.
I have another SLM2024 I want to be on the same VLAN some where else. Switch 1 uses port 24 GBIC as and uplink port to one of the IDF's. Switch 2 uses ports 12 and 24 copper(LACP) to make a hop from another switch(ports 1 and 13 LACP)which inturn is connected to thesame IDF on port 24 GBIC. How do I set up switch 1 ports 7,8,19,20? Also, how do I set up switch 2 ports 7,8,19,20?
View 5 Replies
View Related
Mar 14, 2013
I have IOS 8.0(4) and the base 50 User License...will this config work? I have two networks; my home network, and my lab. I want to split my Internet connection between them, but keep the networks separate for the most part. Will my license allow this config since I can't do DMZ?
interface Ethernet0/0
switchport access vlan 3
!
interface Ethernet0/1
switchport access vlan 1
!
interface Ethernet0/2
switchport access vlan 2
[code]....
View 1 Replies
View Related
May 2, 2011
I have a headquarters office that has recently bought a new voice system.
We have a site to site connection from the head office to 3 remote offices. All have ASA5505 firewall.
I have created 2 interface on the ASA5505: 1: inside with vlan1 and switch port port12: voice with vlan100 and switch port port2
Port1 on the asa goes to port 23 on the switch for vlan data
Port2 on the asa goes to port 24 on the switch for vlan voice
Port23 is member of vlan1 data
I added vlan100 to port 24 but by default vlan1 is member and i can't remove it. Its greyed out
All ports on the switch are member of vlan1 and vlan 100 because the port on the switch goes to the phone and from the phone there is a port that goes to the PC. Phones are getting addresses, and PC as well.
I am having a kind of loop because there is 2 exit for vlan1 (port 23 and 24) and that's slowing down my system and sometime i loose the connectivity to my servers.
When i do a show arp on my asa, i do see that some IP are beeing learned on the wrong interface. some PC addresses 192... are on the voice and some voice IP 10.10... are on the inside.
I am pretty sure that the problem comes from my switch configuration.
View 7 Replies
View Related
