I set up my new Linksys E3200 via hardwired Win XP box on small home network that uses a dsl line. I attached a Seagate Expansion 2TB usb hd to the router. All is well. After rebooting into Debian Linux via dual boot setup, I have a working internet connection but am unable to find the attached usb hard drive. What can I do to make it visible to this and other, linux systems?
View 5 RepliesI have a Cisco/Linksys E2500 router. I connected to it through one of the Ethernet ports with a Microsoft Windows XP Pro machine and installed and ran the setup software. Windows was able to connect to the router and to the internet through the Siemens Gigaset 4300 DSL modem to my internet provider, Windstream.I cannot get my Dell GX620 which is running Linux Debian 6 (Squeeze) to connect to the router through the Ethernet ports.It appears that I receive no reply to the DHCP requests made by Linux.
I have only one monitor, keyboard and mouse and no KVM switch to run both the machines at once. I do have Windows XP Pro running in a VirtualBox virtual machine on the Debian machine,I can configure Debian to a static IP if I knew all of the IP configuration that the E2500 would assign. I would also need to know what reconfiguration the router requires if I use a static IP.
is it possibe to set up a ubuntu linux PC on a linksys wireless router? linksys says "no". also where would I get the printer, wireless card, and sound drivers. it's a dell latitude running a pentium m (yeah, i know).
View 10 Replies View RelatedI'm a Linux user and just got a new Linksys E2000 router. I attached the router to the computer with the Ethernet cable, and switched the router on, expecting it to work as DHCP server by default, so I could access routers configuration and set it up as needed. This however failed right away. Obviously the router didn't start DHCP, even after I reset with the reset button on the back. Now there is no way to accesss the router to configure it, since web interface path relies on router's DHCP function to access it through 192.168.1.1 which is not working. What can be done to enable it?
View 2 Replies View RelatedI just got a new E4200 v2 wireless router. I'm intrigued by the USB port, especially for using it to connect a printer. I currently have a D-Link wireless print server that I'm using to create a network-attached printer, but if I could remove an extra device and just have the printer connected straight to the router
View 2 Replies View RelatedI'm a Linux user and just got a new Linksys E2000 router. I attached the router to the computer with the ethernet cable, and switched the router on, expecting it to work as DHCP server by default, so I could access routers configuration and set it up as needed. This however failed right away. Obviously the router didn't start DHCP, even after I reset with the reset button on the back. Now there is no way to accesss the router to configure it, since web interface path relies on router's DHCP function to access it through 192.168.1.1 which is not working. What can be done to enable it?
View 2 Replies View RelatedSince firmware 1.0.02, E4200 supports connect printers to USB port and print to it from Windows using CiscoConnect.Is there any way to print from Linux (using CUPS, LPD, etc)?
View 3 Replies View RelatedWhen I try to connect OpenVPN through an E4200 v2 router from my Linux Fedora 16 client, the connection hangs. The connection log show that OpenVPN has connected to the VPN server. Internet also freezes until I disconnect OpenVPN.
OpenVPN on Windows works fine through the E4200 router.If I connect the Linux client directly to my Inteno fiber router, OpenVPN works fine.Passthrough is enabled in the router, and I have configured QoS and port forwarding for port 1194. The router has firmware version 2.0.37.
I noticed a bug with the EA4500 (could possibly be all EA series) router that linux machines cannot see network share with the smart firmware. Just right after I upgrade to the smart firmware, all my linux machines cannot see any network shares at all. I downgrade to the classic firmware, every thing works like a charm.
View 5 Replies View RelatedI recently purchased a Cisco-Linksys WRT54GL Wireless-G Broadband Router from Amazon. The specs indicate it's Linux based: [URL] I checked other sites, and found the same claim: [URL] and [URL],But, to my dismay, when I was configuring and viewing the logs of the device.
View 3 Replies View RelatedI've got threeLinux Boxes (running Centos 6). They were all connected to my cheap WRT54GL-- DHCP worked every time.Absolutely no problems. Both the LInux boxes and the WRT54GL had MTU set to manual, 1492.I replaced the WRTt54GL with the expensive E4200. I set the new router's MTU to manual, 1492. NONE of my Linux boxes ever receive a DHCP address. I look at the logs, and they do DHCPDISCOVER, get DHCPNACK, try several different intervals, and then fail the interface and quit.ALL I did was unhook cables from the WRT54GL and plug into the E4200. Yes, the WRT54GL was powered off. NOTHING was changed in the Linux configs. Yes, DHCP is enabled, address-range assigned, etc. BTW-- one box is dual boot with Win7-- in Win7 (using the same card, obviously), DHCP works just fine. But, Linux doesn't work.
I can give the boxes static IP's, and all is well. Just can't get DHCP to work. I evfen tried putting in DHCP reservations (via MAC assignments) for the E4200-- still doesn't work. The new E4200 is on the 02 firmware (which I believe is cuurent). If I can't iron this simple task out, in a couple of days I'm taking the E4200 back, and getting a refund. I'll stay with my old WRT54GL... it works. Hate to give up on some of the new E4200 features, though.
Trying to convert a spare router (Linksys E3200) into a wireless access point toextend my wireless coverage. I thought knew how to do this but having a problem.Steps I followed are:1. Disable the E3200 DHCP server2. Change E3200ip address from 192.168.1.1 to something else3. Disable the firewall4.Make wireless settings5. Connect it lan port to lan port with primaryrouter.The problem I am having is that after I finish step 2 the routerreboots with the browser trying to access it at the new ip address. But thebrowser will not connect.I am doing this on a laptop that is disconnected from my network while I am working on the E3200. It is connected byan ethernet cable to an E3200 lan port. I also tried it wireless with the same result. Browser will not connect at any ip address except 192.168.1.1 and then only after I factory reset the beast to regain the 192.168.1.1 ip address
View 3 Replies View Relatedafter messing with it for a 2 days since I got it I cant seem to get more than 130.0 my last router had 300 same setup same distance
View 9 Replies View RelatedI just ordered the E3200. It's suppose to ship today. I know it comes with 1 USB port for hard drives. Is it possible to connect a USB hub to the router so that I can connect more than 1 hard drive?
View 1 Replies View RelatedI have been using an E3200 and it has been working great. I know have a need for wireless coverage in a distant part of my house and the current router won't get there. I also need wired in that spot of the house as well. I thought to buy a e1200 to use it as a WAP for that part of the house and also to have a few Ethernet ports come off it. Can I connect to my original E3200 wirelessly from the e1200 and then use the e1200 as a WAP and for Ethernet?
View 7 Replies View RelatedI just upgraded my router from 1.0.03 to 1.0.04, I have a few questions:After installing the firmware, I pressed the reset button at the back for almost 1mn, the power lighted as expected, I then unplug the power cord for 30 sec.The strange thing is that this did not lead to a reset of the configuration, all my settings are still here...!But the actual problem is that my internet speed is divided by two, I still have to confirm this observation on the long term.
View 1 Replies View RelatedI have to reboort my router every day to get back an internet connection? I have a desktop and a laptop plus iPads, etc. The laptop loses connectivity every day about the same time. My only solution so far is to reboot the router. I realize that the client lease time is set to 1 day by default but isn't it supposed to ask the modem for another day of life when this happens?
View 5 Replies View RelatedI'm using a DSL line that changes IP's. I have the E3200 set to auto, but everytime the IP changes, my internet goes down, and I get an ip of 127.0.0.1 on the status page. I then have to renew the ip and reboot. This happens once a day, usually.
View 3 Replies View RelatedI have a 6 year old wrt54g that is working fine but old. I want to upgrade and will go with the 3200 or 4200. I really don't need the extra features on the 4200 since everything I have is hardwired (directly to two laptops and to two switches in other parts of the house for tv and printer). I want wireless for times when we move a laptop but it wouldn't be all the time, and we won't (for now) use the media options. The difference in price between the 3200 and 4200 is less than $25 so costs is NOT a factor in deciding.So should I just purchase the 4200 since price is not a factor or go with 3200; I want the most stable of the two and will never need the extra wireless features in the 4200.
View 8 Replies View RelatedI used to have a Belkin router which was losing connectivity throughout the day for a few short moments. After looking at the logs it appears it was issueing a DHCP release randomy which explained the fault. Since it was old router I decided to replace it with a E3200. This worked fine for a few days but then I started to see similar symptions. So currently I am trying to figure out if it's the same issue as before. I tried looking for a log on the router to see if it was also losing/releasing the WAN IP, but apparently the router doesn't log it. I spoke to a tech rep on chat, but I don't think they understand what I was talking about (how frustrating). I even tried to explain it another way that if I hit the 'Release IP address' button and then hit the "Renew IP Adresss' button does this activity get logged.
Where can I find a log to see DHCP activity (on the WAN interface)? There is a DHCP log which shows all the LAN activity but this is not what I need for this issue. I find it hard to believe a mature vendor like Linksys doesn't log this activity?
House has 2 floors. I want to install 2 E3200, one on each floor, but both with the same SSID/Password, etc. so internet connection/streaming throughout the floor is seamless.
Both floors have network wall sockets ready and they all lead to the same modem/router so all devices plugged lead to the same network.
PS. both E3200 have been update to Firmware Version: 1.0.03
I have bought Linksys E3200 less than month ago.I have setup it, connected HD (WD My Book 1TB) through USB and it work good, without any problem.Than week ago, I turned off the router, because of my vacation. Yesterday, I came back, turned on the router. WiFi was working good, cable connection too. But there was no connection to HD. I had checked information about HD on admin page, router understood that it is HD, but not provided share access to folder, also, there was no button, to setup it.I disconnected HD, tried to connect it using the Cisco Connect, it provided mistake with USB connection to HD and than with HTTP connection to router. I disconnected HD, tried to connect it manually: connect HD -> go to admin page -> refresh to show HD -> admin page freeze... -> reboot of router manually.
There was a lot of tries to connect HD, but all was failed.I connect HD to computer, it works successfully.I checked connection to router through USB, using my card reader and SD flash card, it works successfully.Information about HW:
1. Linksys E3200, last update of firmware for German (was bought using German Amazon) country. (Cannot check it now, if needed will check)
2. Computer: Windows XP SP3
3. WD My Book 1TB (NTFS)
I updated my E3200 to 1.0.04 to try to resolve a wireless dropping issue. Now the connected USB storage no longer responds correctly (very delayed if connecting at all). When I try to provision new storage via the routers admin page, I do not get the permissions page.
View 9 Replies View RelatedI just picked up the E3200 and love it. This morning I hooked up my printer via the USB. Everything went smooth until I tried to print something. I thought nothing was happening, but I let it sit for a while. While I was waiting, I was messing around with my network setting in windows. I realized that my network had been set to 'work' for some reason, so I changed it to 'home'. As soon as I did, my printer spit out my test page. (probably 5 min after sending the doc.) I don't know if it was just coincidence or what, so I sent another page and nothing happened (yet).
Is this common to take that long? Is there a way to speed this up?
I've just bought a linksys E3200 wireless router and it hasnt performed even alittle up to expectations.. As above stated, the router keeps disconnecting me from the internet and i do not know how to fix it. It gets really annoying especially when i have to use the internet to do work.
View 9 Replies View RelatedI recently purchased the E3200 Linksys router. Works great as long as I use IE to browse. Won't let me connect to the web with Chrome.
View 2 Replies View RelatedI just upgraded from a Linksys WRT54G to an E3200.I'm thrilled w/ the bells and whistles (e.g. 5 GHz for video to my Boxee and USB connection to my printer for wireless printing), but it seems that on the 2.4 GHz channel, the strength on the E3200 seems to be lower than it was on the WRT54g.I've placed the E3200 exactly where the WRT54G was, and I notice that on all my mobile devices, I either get no signal or a very week signal in my living room. W/ the WRT54G, the signal wasn't 100%, but it was definately better than what it is w/ the E3200.
I have the latest firmware and have adjusted the MTU down to 1400 (I'd left it at 1500 on the WRT54G and it always worked fine). I've also tried to adjust the 2.4 GHz channel to be Wireless-G only network mode and still no luck. I've tried these individually and in combination.
Is the E3200 just broadcasting a weaker signal at 2.4 the my older WRT54G? Should I return it and get another router or is there something I can do to boost the 2.4 signal? Or is there come other configuration I should try to play with?
New E3200 router (a few weeks old).
Using the manual settings under Status/Router and clicking the Disconnect button (by Login Status), the page reloads, and say I am disconnected.
Without any input from me, about 30 seconds later the page reloads and say I am connected.
Clicking disconnect, closing the tab and testing my connection proves that I'm not actually being disconnected at all. I cannot force this router to manually disconnect.
Is this a firmware bug or is there another setting else where that prevents me from manually shutting down my connection?
Edit: Firmware 1.0.04 build 1 Apr 10, 2012
How do I setup a E3200 router using a wireless USB modem to connect to the internet? This is my only choice, I do not have a wired connection and I do not own the telephone wires and there is no permission to do otherwise.
View 3 Replies View RelatedI have a western digital USB 2tb drive. It works great on my intranet (my laptops and other devices can access it). I have a sticky Ip address and would like to be able to access my drive from my work, but I don't know how to set up or if it can be set up to work. Can the USB be port forwarded? I have the E3200 router, Windows 7 OS (if needed)
View 4 Replies View RelatedI managed to connect my USB printer (and tested ok) through the E3200 router using the Cisco Connect programme on Windows 7. I note that there was an option for a USB Printer connection in the set-up screen.
When I tried it on the Mac using Mac OSX 10.7.3 and Cisco Connect Ver 1.4, I noted that there was no option for a USB Printer connection.
Comcast installed a Netgear WNR 1000v2 and it is a piece of crap for WIFI. so I bought a Linksys E3200 to switched them. but I really don't know how to do it. How I can get my wifi and Roku working.
View 1 Replies View RelatedPurchased E3200 and did simple setup via CD setup (Cisco connect). Set up main name and password. Cisco Connect assigned "-guest" to end of main name for the guest account. Gave guest account its own password. Both main and guest accounts were broadcasting OK -- but guest account was not secure and could be accessed without password. (All software and firmware upgrades were done during initial setup).Reset the E3200 and restarted things from the CD setup. Created main account, main account password, and guest password again. In advanced settings, left basic wireless settings at initial settings, changed wireless secutiy to WPA2 Personal. Still having the guest account being broadcast in unlocked status. (Have turned off guest access for now until I can get password protection for it).
View 2 Replies View Related