Linksys Wireless Router :: How To Configure E2000 On Linux

Jan 11, 2012

I'm a Linux user and just got a new Linksys E2000 router. I attached the router to the computer with the Ethernet cable, and switched the router on, expecting it to work as DHCP server by default, so I could access routers configuration and set it up as needed. This however failed right away. Obviously the router didn't start DHCP, even after I reset with the reset button on the back. Now there is no way to accesss the router to configure it, since web interface path relies on router's DHCP function to access it through 192.168.1.1 which is not working. What can be done to enable it?

View 2 Replies


ADVERTISEMENT

Linksys Wireless Router :: Configure E2000 On Linux?

Dec 6, 2011

I'm a Linux user and just got a new Linksys E2000 router. I attached the router to the computer with the ethernet cable, and switched the router on, expecting it to work as DHCP server by default, so I could access routers configuration and set it up as needed. This however failed right away. Obviously the router didn't start DHCP, even after I reset with the reset button on the back. Now there is no way to accesss the router to configure it, since web interface path relies on router's DHCP function to access it through 192.168.1.1 which is not working. What can be done to enable it?

View 2 Replies View Related

Linksys Wireless Router :: How To Setup / Configure E2000

Sep 16, 2010

I just bought a Linksys E2000 router and ever since I set it up the internet will cut in and out on my desktop and my laptop, but when I unplug the internet from the router and plug it directly into my desktop (that's how I have it right now) it works perfectly. I have already tried to reconfigure the router and that didn't work either.

View 4 Replies View Related

Cisco Wireless :: Configure E2000 Linksys As Client Device?

Jun 26, 2011

I'm trying to configure my Linksys E2000 to be an ethernet attached wireless device to use on computers instead of dongles, etc.  I don't want it to route, just act like a Wireless card.

View 1 Replies View Related

How To Configure Linksys E2000 As Access Point

Mar 25, 2011

i have just connected my linksys e2000 to the internet now i would like to set it up so other computers can connect to the internet through it wired/ wireless

View 1 Replies View Related

Wireless :: Ubuntu Linux On Network Using Linksys Router?

Jan 28, 2012

is it possibe to set up a ubuntu linux PC on a linksys wireless router? linksys says "no". also where would I get the printer, wireless card, and sound drivers. it's a dell latitude running a pentium m (yeah, i know).

View 10 Replies View Related

Linksys Wireless Router :: E3200 Not Seen In Debian Linux

Jul 15, 2011

I set up my new Linksys E3200 via hardwired Win XP box on small home network that uses a dsl line.  I attached a Seagate Expansion 2TB usb hd to the router.  All is well.  After rebooting into Debian Linux via dual boot setup, I have a working internet connection but am unable to find the attached usb hard drive.  What can I do to make it visible to this and other, linux systems?

View 5 Replies View Related

Linksys Wireless Router :: Set Up USB Printer On E4200 In Linux?

Aug 9, 2012

I just got a new E4200 v2 wireless router.  I'm intrigued by the USB port, especially for using it to connect a printer.  I currently have a D-Link wireless print server that I'm using to create a network-attached printer, but if I could remove an extra device and just have the printer connected straight to the router

View 2 Replies View Related

Linksys Wireless Router :: Print To E4200 USB Printer From Linux

Oct 18, 2011

Since firmware 1.0.02, E4200 supports connect printers to USB port and print to it from Windows using CiscoConnect.Is there any way to print from Linux (using CUPS, LPD, etc)?

View 3 Replies View Related

Linksys Wireless Router :: Linux OpenVPN Connection Through E4200

Jul 6, 2012

When I try to connect OpenVPN through an E4200 v2 router from my Linux Fedora 16 client, the connection hangs. The connection log show that OpenVPN has connected to the VPN server. Internet also freezes until I disconnect OpenVPN.

OpenVPN on Windows works fine through the E4200 router.If I connect the Linux client directly to my Inteno fiber router, OpenVPN works fine.Passthrough is enabled in the router, and I have configured QoS and port forwarding for port 1194. The router has firmware version 2.0.37.

View 5 Replies View Related

Linksys Wireless Router :: EA4500 Linux Network Share?

Dec 10, 2012

I noticed a bug with the EA4500 (could possibly be all EA series) router that linux machines cannot see network share with the smart firmware. Just right after I upgrade to the smart firmware, all my linux machines cannot see any network shares at all. I downgrade to the classic firmware, every thing works like a charm.

View 5 Replies View Related

Linksys Wireless Router :: WRT54GL Specifications Shows That It Is Linux Based

Jul 7, 2011

I recently purchased a Cisco-Linksys WRT54GL Wireless-G Broadband Router from Amazon.  The specs indicate it's Linux based: [URL] I checked other sites, and found the same claim: [URL] and [URL],But, to my dismay, when I was configuring and viewing the logs of the device.

View 3 Replies View Related

Linksys Wireless Router :: E4200 Won't Give DHCP Address To Linux Boxes?

Sep 25, 2011

I've got threeLinux Boxes (running Centos 6).  They were all connected to my cheap WRT54GL--  DHCP worked every time.Absolutely no problems.  Both the LInux boxes and the WRT54GL had MTU set to manual, 1492.I replaced the WRTt54GL with the expensive E4200.  I set the new router's MTU to manual, 1492.  NONE of my Linux boxes ever receive a DHCP address.  I look at the logs, and they do DHCPDISCOVER, get DHCPNACK, try several different intervals, and then fail the interface and quit.ALL I did was unhook cables from the WRT54GL and plug into the E4200.  Yes, the WRT54GL was powered off.   NOTHING was changed in the Linux configs.  Yes, DHCP is enabled, address-range assigned, etc.  BTW--  one box is dual boot with Win7-- in Win7 (using the same card, obviously), DHCP works just fine.  But, Linux doesn't work.
 
I can give the boxes static IP's, and all is well.  Just can't get DHCP to work.  I evfen tried putting in DHCP reservations (via MAC assignments)  for the E4200-- still doesn't work. The new E4200 is on the 02 firmware (which I believe is cuurent). If I can't iron this simple task out, in a couple of days I'm taking the E4200 back, and getting a refund.  I'll stay with my old WRT54GL... it works.  Hate to give up on some of the new E4200 features, though.

View 2 Replies View Related

Linksys Wireless Router :: E2500 Linux Debian 6 (Squeeze) DHCP Failure

Nov 17, 2012

I have a Cisco/Linksys E2500 router. I connected to it through one of the Ethernet ports with a Microsoft Windows XP Pro machine and installed and ran the setup software. Windows was able to connect to the router and to the internet through the Siemens Gigaset 4300 DSL modem to my internet provider, Windstream.I cannot get my Dell GX620 which is running Linux Debian 6 (Squeeze) to connect to the router through the Ethernet ports.It appears that I receive no reply to the DHCP requests made by Linux.
 
I have only one monitor, keyboard and mouse and no KVM switch to run both the machines at once. I do have Windows XP Pro running in a VirtualBox virtual machine on the Debian machine,I can configure Debian to a static IP if I knew all of the IP configuration that the E2500 would assign. I would also need to know what reconfiguration the router requires if I use a static IP.

View 1 Replies View Related

Servers :: Configure Linux Server With LDAP?

May 31, 2011

the linux server should be configured with LDAP, so that any user should not login into that machine by local user credentials but by his intranet credentials.

View 1 Replies View Related

Cisco AAA/Identity/Nac :: To Configure MS ACS 4.1.1.23 To Allow Linux TACACS

Sep 20, 2011

I am running ACS 4.1.1.23 on a Microsoft server and I am trying to get TACACS to work with two Linux servers.  The servers are capable of TACACS, are using port 49 and have the correct shared secret.  I believe I do not have the devices configured properly on the ACS side.  These 2 servers currently are using RADIUS and we are getting bit by the bug where the ACS application will start rejecting RADIUS authentication requests but still accept TACACS requests.

View 6 Replies View Related

Linksys Wireless Router :: Internet Access Regarding Linksys E2000

Aug 21, 2011

I can connect to my router but either way it seems like i can't get any internet access (both wireless and by cable): url...I have tried the steps that the linksys FAQ suggests shall fix this problem, but this has not worked. I have also tried to reset the router without any luck. I know it its not the modem that is causing the problem because I'm wired to it now.On the E2000 every light is blinking as it should be (hence the FAQ) so it indicates that there might be a problem with the connection between the router and the computer (tested on other computers too without success).

View 9 Replies View Related

Linksys Wireless Router :: Set WAN Side DNS On E2000?

Jan 27, 2012

I would like to set the router's dns entries but I don't see how to do that.  Basic setup page has DNS setep for the DHCP scope but I don't want to push dns to my pc's.  What I am looking to do is to use an alternate dns to what my service provder pushes and still have the abliity to route on my internal network. 

View 1 Replies View Related

Linksys Wireless Router :: E2000 - How To Find WPA Key

Oct 2, 2011

We bought our Linksys E2000 in the summer and went to set it up but something came up... Now we are trying to set it up but cannot find our WPA key... Where can we find this?

View 2 Replies View Related

Linksys Wireless Router :: E2000 Ports Not Enough

Jan 28, 2012

So i can only forward 10 ports on my E2000.Example, one game (Battlefield 3) requires 10 ports (TCP and UDP combined).What about my other games? how can one, if possible, add more ports to the router?

View 4 Replies View Related

Linksys Wireless Router :: E2000 Won't Connect

Nov 3, 2011

E2000. I run the setup program, my laptop sees the router and it shows a strong signal. When I try to connect with it, it won't connect.

View 9 Replies View Related

Linksys Wireless Router :: E2000 - Turning Off WPS?

May 28, 2012

I've been looking around like a madman now in the settings. where can I turn off my WPS ? Just cracked my own PIN within 6 hours with Reaver.

View 9 Replies View Related

Linksys Wireless Router :: E2000 - Way To Get Connectivity

Apr 24, 2011

My internet cut out last week and after calling my ISP I found out it was in fact my router that was causing the problem (regular connection to PPOE works fine). I've only had my E2000 about 2-3 months and have not had any problems with it. I've restarted the router, done a factory reset, upgraded the firmware, renewed the IP and still I cannot get any connectivity. I can access the router UI fine and I get a response from pinging it and also I have tried replacing the cables but that didn't fix the problem either.

View 9 Replies View Related

Linksys Wireless Router :: E2000 To Use It For A Switch

Aug 28, 2011

I have an E2000 that I was given as a gift. I would like to use at it my office for a switch at my cubicle where I can connect 2-3 computers simultaneously.  I am in a large network and am a user only.  When I hooked the E2000 up today my computers would not get internet access BUT my laptop got wireless access and internet.

View 2 Replies View Related

Linksys Wireless Router :: E2000 - How To Keep Speed At 300 M

Dec 7, 2011

I'm using E2000 currently and meet a wireless connection problem. The speed can up to 300M bps. When I confiured the E2000 to band auto (20-40mhz) and my wireless network card to work at also auto (20-40) mode, it always down to 144M speed when connection.
 
If I changed some settings in E2000's wireless configuration, in the status sheet I can see it works at 40MHZ. But after a while,(5-10 mins) it automaticly down to 20MHZ and my labtop connect only got a 144M speed.
 
how can I deal with that to make it always keep at 300M connection? Note the previous router I used to connect to my lattop can always keep that speed.

View 2 Replies View Related

Linksys Wireless Router :: E2000 Won't Connect To Internet

Nov 14, 2011

I have a E2000 router that would go out and I would have to unplug and replug in every once in a while. Finally it just stopped working completely. I reset the router and now it won't let me connect. I have followed advice given to soembody else on here and went into router settings and cloned the mac, the IP address was there and reset my security settings. It let me connect to the network but not the internet...

View 2 Replies View Related

Linksys Wireless Router :: Can't Access Internet Through E2000

Apr 21, 2013

I have a Linksys E2000.
 
It worked fine until one day, without any change at all, it simply stoped working. I mean, I can still connect through my wifi laptop connection (it shows connected to my router and says that I have an excelent signal). But, I can't reach the internet. But, If I unplug the internet cable, and plug it in my laptop, the connection works fine. A friend told me that this could be caused intentionally by the internet provider, that they would block my signal to avoid me using a wireless router, trying to force consumers to sign their own wireless service. Thus, by this friend advice, I've cloned my laptop's MAC address to the router. It didn't work either.

View 4 Replies View Related

Linksys Wireless Router :: E2000 Slower Than ISP (even When Wired)

Sep 7, 2012

I have a Cisco E2000. When i connect to my cable modem directly, I get 30-35 MBps down and about 10 up. When I plug in to my E2000 it does that at first... but slowly over time, the speed degrades, usually down to about 5-6 down and 3-4 up. If I unplug the router, it typically restores full speed, but not for long (a few days maybe). Also, when I unplug the router, it is pretty hot.

View 4 Replies View Related

Linksys Wireless Router :: How To Open A E2000 Nat Type

Nov 11, 2011

For Xbox 360? currently, whether wired or wireless, my Xbox 360's NAT type is strict, and I am unable to do anything online whatsoever. Is there anyways to set up an exception, or anything that can open my Xbox's connection to my router so I can actually use it online?

View 2 Replies View Related

Linksys Wireless Router :: E2000 - How To Block Websites

Oct 28, 2011

Im using a linksys e 2000
 
Is there a way to block more than 4 websites, and 4 keywords?

View 4 Replies View Related

Linksys Wireless Router :: E2000 Bonjour Drops Out

Nov 11, 2011

I have an E2000 router that has an intermittent issue where Bonjour drops out. Suddenly my Apple TV won't see my computers, and my iPad won't see my network printer. This happens whether the Apple TV and computers are connected via wired or wireless interfaces.
 
Restarting the devices does not solve the issue.
 
Restarting the router solves the issue (until it happens again...)
 
My router is version 1.0, with 1.0.04 firmware.

View 3 Replies View Related

Linksys Wireless Router :: E2000 PC Gets Choppy In 40 Mhz Mode

Jul 11, 2011

I have a e2000 router and a wmp600n wireless card in my desktop pc.  Everything works fine until I enable 40 mhz for faster speeds in the e2000 router.  When I do this the router switches from 20 mhz to 40 mhz and I get the faster speed.  But the effect of this is that my pc gets all "choppy".  What I mean is that everything freezes up every few sec.  For example when im minimizing windows, the windows freeze half way for about a sec then unfreezes.  My mouse does the same thing, even my sound is choppy.  I have to switch my router back to 20 mhz and then everything is fine again.
 
Using windows 7 64 bit

Using newest dirvers and firmware from Linksys.

View 4 Replies View Related

Linksys Wireless Router :: E2000 LAN Disconnected For No Reason

Jan 31, 2012

I have a E2000 for a half a year now.We have been on hollyday for 5 days so my routers has been shutdown.Today it happend 3 times that my complete LAN disconnected for no reasonI didn't have any wired or wireless connection.

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved