Cisco Routers :: WRVS4400N Configuration For VLAN

Jan 17, 2012

we're planning a small private network for our holiday appartments. Therefore we get a Cisco Small Buisiness Switch SG200-18 from a friend. We have created 6 diffrent VLANs on it. But it seems that we need a router do to the routing of our cable connection to the WAN. Is it possible to connect the WRVS4400N to that switch and configure multiple subnets for that vlans? Or how can i do that? I have add a drawing for better understanding.

View 3 Replies

Cisco Routers :: WRVS4400N WAN Configuration With ISP Supplier

Jun 9, 2012

I have a problem with new WRVS4400N router.after connected it to my infrastructure modem and configured its WAN configuration with my ISP supplier, ISP see that I'm connected, I see that I'm connected, get an EXCELLENT link and about 70M link speed.Yet no able to access the web when trying to do so from a different devices ( TABLET, LAPTOP) or different connections ( WiFi , Ethernet cable).when I'm connected directly to my infrastructure modem, access to web is successful.in addition, when previous router ( EDIMAX ) that was connected also and tried, access to web was successful.

View 9 Replies View Related

Cisco Wireless :: WRVS4400N How To Separate SSID By Vlan

Aug 10, 2011

I have a WRVS4400N that broadcasts two different SSIDs. One is a public network and the second is a private network. Right now, both SSIDs are pulling from the same DHCP server, but I would like to separate the public from the private. How can I separate these SSIDs by vlans? I can't seem to get the vlans to route to separate ports.

This is my vlan settings. I have two DHCP servers right now. One is in an isolated network plugged into Port 3 of the WRVS4400N. The other is on the production network, plugged into port 1 of the WRVS4400N. For some reason, whenever I connect to SSID Public, it won't pull an IP from the DHCP on port 1, it only pulls it from the one on port 2.

I know there is three SSIDs here, the Static one is going to be the same network as the EMS one.

View 4 Replies View Related

Cisco Firewall :: 6509 / FWSM VLAN Configuration Mismatch And Some VLAN Deleted

Aug 12, 2012

We have 6509 VSS with FWSM Module and we have created two context on it, one is INTERNALL CONTEXT othe is EXTERNALL Context? We have spanned various VLANS in switches and FWSM context level. All VLAN Gateways are configured in context level.

Activity description : We had planned migration of these devices into a new Datacenter, it was a planned activity. During migration of devices from one Dc to a new DC we broke the VSS and kept the primary running and removed the secondary switch and migrated this secondary to new DC and powered this device ON in the new DC and checked all the config was very much fine but this device was OFF network as secondary was brought to new DC just to limit the downtime during the primary switch movement.

During the activity ( Primary switch movement )We powered off the Primary switch and mean time before shifting into new Data center We had brought up secondary switch which was already existing in the DC was put live in the network and it was working fine without any issues.

Later we had moved Primary into new data center and tried to put into VSS with the secondary , during this period the secondary device into went into RECOVERY MODE and primary device was not responding and devices went off network and immediatly we removed the VSL link and brought up primary into production network without secondary online in the network ( Without VSS just stand alone switch ) network started working, but bringing up the primary we found that some of the VLANS in the FWSM was deleted and some VLAN had misconfiguration ( example : say original VLAN ip 10.200.112.1 has become 10.300.13.1 ) also some of the access list as well as SVI was deleted making configuration mismatch.

Wanted to know while syncronization b/n primary and secondary switch in VSS if we pull out VSL link would create this type of issues.