Cisco WAN :: WRVS4400N - Setup VLAN For School Network For Student IPads / IPods?

Jul 10, 2011

I work at a small private school that is going to implement about 20 ipads for classes. Students bring their ipods and iphones and are connecting to the existing unsecured wireless access points and are taking up the remaining IP addresses in the DHCP scope. I am running out of IP addresses and was wondering if I could set up a VLAN using the Cisco WRVS4400N for all of these wireless devices the students will be using. I plan to pull out all unsecured wireless AP's and replace with what ever solution we come up with. I will need about 6 access points/routers to cover the entire school. There is not a lot of money for technology and the ipods were donated. I have never set up a VLAN before. Is there an inexpensive way to allow the students with their personal ipads/ipods and the 20 ipads owned by the school to connect to a VLAN to keep from using up our DHCP IP addresses from the server.

View 1 Replies


ADVERTISEMENT

D-Link DIR-615 :: IPads And IPods Keep Loosing Connection

Nov 10, 2011

We installed a DIR-615 Vers. E1 FV. 5.00NA and since then i-Pods and i-Pads keep dropping wi-fi connections. All wireless PC's and printers are working fine. We have configured the wireless as:Mixed 802.11 n,g and b. Auto channel csan enabled, using channel 6. Wireless security is WPA-Personnal. WPA is configured as Auto, TKIP and AES with a pre-shared key.

View 5 Replies View Related

School Network Setup For Static IP?

Apr 4, 2013

I have recently purchased one of the new ASUS RT-AC66U routers and this router comes with the new aicloud feature. This feature allows you to remotely connect into the router and access any external drive attached as well as your computers shared folders.My issue arises due my location. I live on a school campus and with this being the case, setting up an IP address that is static and is available from everywhere is not really possible. I have my router which I can setup with a static number but the school breaks theirs down so mine will never stay that wayI am trying to see if there is a way to make an address static using an update feature or something of that nature to constantly have a new IP when mine changes.

View 1 Replies View Related

Linksys Wireless Router :: WRVS4400N - How To Set Up VLAN For School Network

Jul 11, 2011

I work at a small private school that is going to implement about 20 ipads for classes. Students bring their ipods and iphones and are connecting to the existing unsecured wireless access points and are taking up the remaining IP addresses in the DHCP scope. I am running out of IP addresses and was wondering if I could set up a VLAN using the Cisco WRVS4400N for all of these wireless devices the students will be using. I plan to pull out all unsecured wireless AP's and replace with what ever solution we come up with. I will need about 6 access points/routers to cover the entire school. There is not a lot of money for technology and the ipods were donated. I have never set up a VLAN before. Is there an inexpensive way to allow the students with their personal ipads/ipods and the 20 ipads owned by the school to connect to a VLAN to keep from using up our DHCP IP addresses from the server.

View 1 Replies View Related

Protocols / Routing :: Partition Departmental IP Network Address Block To Create Staff / Student Subnet?

Sep 28, 2011

partition the departmental IP network address block to create a staff and a student subnet. Each of these will be identified by its own network address and netmask. It is university policy that you must be economical with the IP addresses. That is, the subnets must be as small as possible, but they must be large enough to accommodate the maximum number of hosts you were given. Also, it is university policy that the respective gateway router to the outside world should always be given the highest possible host IP address in the subnet. The student subnet should have a higher IP network address than the staff subnet. The network must be able to support up to 60 machines on the staff subnet (not counting the router) and up to 120 machines on the student subnet (also not counting the router).

IP address/netmask
University network address127.158.128.0
University network mask255.255.192.0
University internet gateway IP address127.158.191.254
Department network mask255.255.254.0
Department router address127.158.129.254

Suppose that the network address of the departmental network is 127.158.128.0 (calculated by AND between Dep network mask and Dep router address)I know that 60 machines would use 6 bits for the staff subnet.the netmask of staff would be 255.255.255.192.how can I figure out the the IP network address of the staff subnet.I have worked out the range for the staff subnetwork.

127.158.128.0 - 127.158.128.63
127.158.128.1 = Gateway address
127.158.128.63 = Broadcast address

Now how can I calculate the IP network address of the staff subnet?

View 5 Replies View Related

Cannot Access School Network Drive

Apr 22, 2013

My school have a couple of public network drives like one containing all the network printers the school own. But when i am trying to access this drive through my lenovo laptop by typing a command in run \addressname. I receive an error from windows telling me: "You cannot access \addressname | Check the spelling of the name. Otherwise, there might be a problem with a problem with your network. To try to identify and resolve network problem, click Diagnose" after a couple of minutes.

View 1 Replies View Related

Add / Remove Items From School Network PCs?

Oct 20, 2011

How do I audit a network PC to see what it has on it or delete what does not need to be there. If I do it through the Windows add or remove they re-install. In the old days I could do it in DOS and then 'Tree' to list the properties and then delete what I wanted permanently.

View 1 Replies View Related

Home Network :: WAN Access With VLAN Setup?

Mar 18, 2013

I am extremely new to network but also excited with the things you can achieve with a Cisco switch.For about 3 months I sat down looking at my "Cisco C2950-24 Switch", this surely for such a beastly looking thing it must be able to do something other than just allow you to plug in cables. So with that said I started to do some reading and watched a couple of You Tube Videos.I am on the route to complete my first goal and thats have my own VLAN setup with 1 Server and 6 clients. The Server is running ESXi therefore a few other servers are running inside it too.So my VLAN - VLANID 20 running the network 172.22.22.0. On the physical switch I have the following:Port 1 - WAN incoming connection from my Router on the network 192.168.178.0Port 2 thru 9 all running on VLAN 20.By the way I am using the GUI Cisco Network assistant

View 4 Replies View Related

Home Network :: Use A Router At School To Make A Ftp Server?

Aug 20, 2012

i live in a dorm and i want to stream movies to my nexus 7 but i dont want to buy a nas. can i connect my external to a router [URL] and use that to stream movies. i dont need to be able to connect to it all over campus (i know that involves hacking the proxy) but mainly in my room would be nice.

View 2 Replies View Related

Computer Disappears From School Network - Cannot Reconnect To Printer

Mar 10, 2013

win xp I work at a junior high school. A lot of the computers are part of a work group so they can share printers.

I'm having problems connecting to a printer. It has worked for a long time, it's still my default printer, but when I try to access it, it gives me a spooling error.

Now here's why I think it's a network problem.I can't access the main computer's network location (the one hooked up directly to the printer). All the other computers come up on the networkjust fine. And the one in question is only able to access very few computers in the network browser. let me simplify:

computer A/ brother printershared computer B/no longer sees A on network A/ sees only a small portion of other computers on network B/ sees all computers but A

Again, I don't think it's a spooler problem. It probably gives that error because it's a default printer with a lost connection.

View 10 Replies View Related

Routers / Switches :: Setup A Vlan To Access Internet Not Network?

Nov 7, 2011

I have a Dell switch setup with 2 Vlan's. Vlan 1 is to the network. Vlan 20 is going to be for wireless access to the internet. How do I configure the switch/router so that Vlan 20 only connects to the internet and not the network? I will later want to have a 2nd SSID that I want to connect to both the internet and network.

View 5 Replies View Related

Unable To Create Wireless Network In Dorm / School Internet

Sep 18, 2012

I am trying to connect my wireless router into the wired ethernet so that i can create a private wireless network for our room. The thing is, my school realizes what you are trying to do and your browser only displays "you are attempting to access (college.edu) network on an unauthorized wireless network. My friend has made it work by turning off the dhcp with his airport extreme and setting it to create new network instead of extend, but after I turn off dhcp I dont know what i should put in for a static ip/ dns/ what to do at all. I can look at all the connections with ipconfig/all , I just don't know the magic things to put in after turning off dhcp to make this work. I have a netgear wireless wndr 3400 n600 router.

View 6 Replies View Related

Cisco Routers :: WRVS4400N Configuration For VLAN

Jan 17, 2012

we're planning a small private network for our holiday appartments. Therefore we get a Cisco Small Buisiness Switch SG200-18 from a friend. We have created 6 diffrent VLANs on it. But it seems that we need a router do to the routing of our cable connection to the WAN. Is it possible to connect the WRVS4400N to that switch and configure multiple subnets for that vlans? Or how can i do that? I have add a drawing for better understanding.

View 3 Replies View Related

Cisco Wireless :: WRVS4400N How To Separate SSID By Vlan

Aug 10, 2011

I have a WRVS4400N that broadcasts two different SSIDs.  One is a  public network and the second is a private network.  Right now, both  SSIDs are pulling from the same DHCP server, but I would like to  separate the public from the private.  How can I separate these SSIDs by  vlans?  I can't seem to get the vlans to route to separate ports.
 
This  is my vlan settings.  I have two DHCP servers right now.  One is in an  isolated network plugged into Port 3 of the WRVS4400N.  The other is on  the production network, plugged into port 1 of the WRVS4400N. For  some reason, whenever I connect to SSID Public, it won't pull an IP  from the DHCP on port 1, it only pulls it from the one on port 2.
 
I know there is three SSIDs here, the Static one is going to be the same network as the EMS one.

View 4 Replies View Related

Linksys Wireless Router :: WRT54G Laptop Doesn't Get Error In School Network

Jul 2, 2011

I've tried looking for solutions on the windows seven forums and all over Google but none of them worked.The problem is, sometimes I get an "Unidentified Network, No Internet Access" error on my laptop (wireless). When this happens, the lan speed drops to 1.0 mbps and I get the "No Data Received" error when I try to load pages.My internet is on fine and my brother can access the internet fine on a desktop which is wired to the router and modem. My mom's notebook sometimes gets this error as well.
 
Is there any real solution for this problem or known compatibility problems between my WRT54G (version 1.1 I think) and Windows 7? Really need a solution to this, before I had to re-setup my whole connection, I didn't get such a problem. My laptop doesn't get the error in the school network either. 

View 2 Replies View Related

Cisco :: SF302-08 VLAN Setup - VLAN Cannot Communicate With Each Other?

Nov 27, 2012

I am trying to set up a Vlan on an SF-302-08 small business switch. I would like two Vlans both with internet access but the two cannot communicate with each other. I am not really sure how to go about setting this up as its all fairly new to me. I have successfully set up the Vlans and the ports on each VLAN cannot communicate with each other however the internet access will only work when plugged into either VLAN but wont work on both together

View 1 Replies View Related

Cisco VPN :: WRVS4400N Trying To Setup VPN With QuickVPN

Sep 27, 2011

I am trying to setup VPN with WRVS4400N and Quick VPN on client side. I am fairly new to VPN and did some research and looked through the manual but can't seem to get it to work so far and from what I noticed many people are having this problem.
 
Basically it gives the "Failed to establish connection" generic error, shows it almost instantly.It also showed the certificate error before but then I read about putting it in the installation directory and it stopped showing it, and whats strange is later I removed it but it doesnt show the error any longer, so don't know if its caching it somewhere or what can be going on...
 
In effort to look for answer and test things out I tried to connect to another location and setup a WRV200 router, I also get the same error but not instantly, it even shows "Activating Policy" but then doesn't go farther and shows the generic error.Also with this setup strangly it always shows the certificate error, no matter if I put one in directory or not... Even tried to name it as the WRVS4400N certificate name...
 
Anyway VPN IPSec is disabled, and Client Accounts are configured and changed password several times to make sure its correct, VPN Passthrough enabled on all 3 options. I tried to disable Windows Router, I also have a router in place do I possibly need to open some type of ports for the QuickVPN client?

View 1 Replies View Related

Cisco Routers :: WRVS4400N - Setup VPN Connection?

Apr 6, 2013

How to setup VPN connection,
 
Head office : fortigate 200b firewall - SSL, IPsec
 
Branch office: WRVS4400N Wireless-N Gigabit Security Router with VPN
 
Both side have the public IP.

View 1 Replies View Related

Cisco VPN :: WRVS4400N Wireless-N Gigabit Router Setup To Use AnyConnect?

Oct 23, 2011

i bought this router because I wanted a gigabit router for my small business and I figured whats better than a small business router? Well, one think I used pretty heavily on my Linksys WRG54GS was a simple port forward to my XP box for VPN. I know nothing about how to currectly set up VPN in this router. Does this router have a built in VPN server? Also, is there anyway to completely disable everything VPN side on this router and simply forward my port 1723 to my computer again? I am using this in conjunction with my android phone. I downloaded the AnnyConnect software, but yielded zero success. I have a working tun.ko installed on my rooted android phone, but this all is completely too much work for something that worked very well before using simple port forwarding and the built in vpn client on the phone. How can I correctly set up my router for the VPN to use with the AnnyConnect application I have on my cell phone?

View 1 Replies View Related

Linksys Wireless Router :: WRVS4400N Setup - How To Get WDS To Work

Aug 29, 2011

I have a WRVS4400N setup as a main router for one of our bays.  For wired connections it is working with no problems.  When I first installed it it ran fine for wireless as well.  I was trying to get WDS to work and at some point the wireless stopped working.  My laptop can no longer connect to it and often cannot see it when doing a scan for networks.  I have already checked that it isn't a problem with the laptop, that there are not other networks causing interferance, and even tried resetting to default configs.

View 1 Replies View Related

Cisco Wireless :: Setup WRVS4400N To Isolate Guest Totally From Internal SSID

Jan 25, 2011

A query here with regards to Wireless isolation between SSID and wireless isolation within SSID.If we have 2 SSID, eg. InternalSSID, GuestSSID on AP1.Both SSID are set to Enabled for isolation between SSID, and within SSID, that would mean all machines connected thro' this AP1, would be isolated from one another.
 
1) If there's 1 laptop that connects to another AP, lets call it AP2, (doesn't have isolation function) on ssid01. Would this laptop still be isolated from those that connects to the first AP?
 
2) If there are wired PCs connected to the router. And the 2 APs are connected to the same router. Would the machines connected thro' the AP1 on either InternalSSID, GuestSSID be able to access those wired PCs? (My assumption is yes.)
 
3) Is there a quick and efficient way to setup on WRVS4400N to isolate GuestSSID totally from InternalSSID, and wired PCs. InternalSSID and wired PCs should be allowed to 'see' one another.

The challenge here is that, the network points are all installed already. Both AP are connecting thro' 2 separate unmanaged switch together with a couple of other PCs. 1 Port on the unmanaged switch, each,connects to the router.

View 1 Replies View Related

Cisco AAA/Identity/Nac :: NAC 4.9 Not Working With Iphones / Ipads

Oct 9, 2011

we updated our NAC appliances from 4.8.1 to 4.9 and have noticed that web authentication is no longer woking on Apple IOS devices. We had setup a user page for the MAC_ALL OS and iphones etc. were able to authenticate using thier browser ok. Now (after the upgrade) after they authenticate they receive the below warning.
 
There doens't seem to be any other config changes we can make for the IOS device.

View 2 Replies View Related

Cisco Wireless :: 6509 IPads Not Staying Connected To APs

Apr 19, 2012

All, I am the wireless administrator for a rather large school district in Oregon, and we are seeing numerous issues with iPad's connecting and staying connected to our lightweight AP's in an HREAP configuration.  Our iPad carts have about 20 iPads a piece and an AIR-LAP1142 supporting them.  We have no issues with getting non-Apple products to connect and stay connected, but for some reason the iPads are creating a major issue.  We currently run 8 4400 WISM blades via two 6509's, running code 7.0.116.0.Our AP's are running 7.0.116.0 as their primary software and their IOS is 12.4(23c)JA2.

View 12 Replies View Related

Cisco Wireless :: IPADs Iphones And Macs Do Not Connect 1131

Sep 8, 2011

Cisco Air 1131 AP.  Having problems with Apple products.  Even tried no security.

View 2 Replies View Related

Cisco :: 3502i - IPads Change Networks (SSID) Automatically

Sep 12, 2012

We are using cisco 3502i AP's and 5508 controler. We have two SSID's. "SA Wireless" and "Guest Wireless". SA Wireless is WPA2 enterprise security and the "Guest Wireless" is open. The iPads will disconnect from "SA Wireless" and join "Guest Wireless" at random. Is there a way to force them to stay on "SA Wireless" and only change if you actually tell the iPad to change?

View 1 Replies View Related

Linksys Wireless Router :: E3000 Slows Down With IPads

Jul 23, 2011

Ever since I started using iPads at the house I have had to reboot the router about once a week because the download speeds drops by approximately 90%.  As soon as the reboot completes all is right with the world for about another week.  During the course of the week, but not all at once, we will have 4 iPads, 3 iPhones, 2 laptops and one desktop(wired), a Verizon signal booster and house guests.  I have updated the firmware. 

View 1 Replies View Related

Cisco Switching/Routing :: 841 - Using Native Windows Client / IPads And IPhones.

Jul 21, 2012

I have a small home network currently using a cisco 841 which is working great. Host a web site and Exchange plus all 10 computers access the net using Verizon FIOS all works. I can even VPN in to my newtwork remotely.I can only VPN using the Cisco client. I would like to use the Native Windows Client and Ipads and Iphones. I believe they use PPTP and the Cisco client is using IPSEC.Which Cisco router can I get that would support all the above?

View 14 Replies View Related

Cisco VPN :: WRVS4400N VPN IPsec Gateway To Gateway Setup?

Jan 29, 2012

Just bought 3 WRVS4400N, I wanted to setup gateway to gateway VPN.  I followed the instructions on the WRVS4400N admin guide and VPN does not connect.  I also downloaded the VPN setup wizard and that also did get the gateway connected.  Everything seems to be correct.  Do I have to enable anything else?  Firewall setting?
 
Below is my config.
 
IPSec VPN Tunnel: Enabled
Tunnel Name: TUN01 
Local Security gateway: IP only
WAN1 IP: 192.168.100.1
SUBNET: 255.255.255.0
Local Security type: subnet
LOCAL IP: 10.10.10.1
SUBNET: 255.255.255.0

[code]....

View 1 Replies View Related

Linksys Cable / DSL :: X3000 None Of Wire Attached IPads Or Notebooks

Sep 16, 2012

I have a small home LAN of four hard-wired PCs and two iPads and two notebooks which are connected by wireless.  At the heart of it all is a Linksys X3000 wireless router.  Any of the four PCs that  are hard wired to the X3000 have no problems talking to each other but none of the wireless-attached iPads or notebooks are able to see any other machine on the network.  All machines are able to access the Internet.

View 9 Replies View Related

SG-200 - How To Setup Vlan

Nov 11, 2011

I've been reading this manual day in and out and can't figure it out. I think im getting Dell's & Cisco's Terminology mixxed up and that's why i can't get this switch to work.

I know my vlans work on my TZ210 ( sonicwall firewall) because they work on my dell managed switch, but now that i have my Cisco one, id like to setup my vlans on this..

If i can get one working i can do the rest.Trying to create vlan 50, iv'e created it but i don't know if i have done it correctly.

View 7 Replies View Related

Cisco Switches :: VLAN Setup On SG-200-26P

Apr 18, 2013

I'm trying to setup following scenario which is working with no issue on netgear switches (like GS108) but I have not been able to get it to work on Cisco SG-200 I did quite a bit of reading here on many post but nothing seems to work.

View 6 Replies View Related

Cisco LAN :: RVS4000 And VLan Setup

Aug 23, 2012

I have a Cisco RVS400 router at my restaurant. In lan ports 1-3 on the router, I have plugged in my point-of-sale computers.Into LAN port 4 I have plugged my wireless access point that is in my dining room.

The wireless access is there ONLY for the customers to access the internet. I want to make sure the customers cannot access my company data, can this be accomplished through the use of VLANs ? If so, how do I do this? All of my devices are configured for dhcp..if that's relevant.

View 2 Replies View Related

Cisco Switches :: VLAN Setup On SF302-08P?

Feb 6, 2013

I have the following setup using two SF302-08P PoE switches:
   
1st floor
=========
Switch #1 <-------> private network
<-------> public network

[Code].....

I have tried to make the config in switch #2 identical to switch #1, but something is still wrong. Is this most likely a VLAN setup problem, or what?

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved