School Network Setup For Static IP?
Apr 4, 2013
I have recently purchased one of the new ASUS RT-AC66U routers and this router comes with the new aicloud feature. This feature allows you to remotely connect into the router and access any external drive attached as well as your computers shared folders.My issue arises due my location. I live on a school campus and with this being the case, setting up an IP address that is static and is available from everywhere is not really possible. I have my router which I can setup with a static number but the school breaks theirs down so mine will never stay that wayI am trying to see if there is a way to make an address static using an update feature or something of that nature to constantly have a new IP when mine changes.
View 1 Replies
ADVERTISEMENT
Jul 10, 2011
I work at a small private school that is going to implement about 20 ipads for classes. Students bring their ipods and iphones and are connecting to the existing unsecured wireless access points and are taking up the remaining IP addresses in the DHCP scope. I am running out of IP addresses and was wondering if I could set up a VLAN using the Cisco WRVS4400N for all of these wireless devices the students will be using. I plan to pull out all unsecured wireless AP's and replace with what ever solution we come up with. I will need about 6 access points/routers to cover the entire school. There is not a lot of money for technology and the ipods were donated. I have never set up a VLAN before. Is there an inexpensive way to allow the students with their personal ipads/ipods and the 20 ipads owned by the school to connect to a VLAN to keep from using up our DHCP IP addresses from the server.
View 1 Replies
View Related
Apr 4, 2013
I have recently purchased one of the new ASUS RT-AC66U routers and this router comes with the new aicloud feature. This feature allows you to remotely connect into the router and access any external drive attached as well as your computers shared folders.My issue arises due my location. I live on a school campus and with this being the case, setting up an IP address that is static and is available from everywhere is not really possible. I have my router which I can setup with a static number but the school breaks theirs down so mine will never stay that way.I am trying to see if there is a way to make an address static using an update feature or something of that nature to constantly have a new IP when mine changes.
View 2 Replies
View Related
Apr 22, 2013
My school have a couple of public network drives like one containing all the network printers the school own. But when i am trying to access this drive through my lenovo laptop by typing a command in run \addressname. I receive an error from windows telling me: "You cannot access \addressname | Check the spelling of the name. Otherwise, there might be a problem with a problem with your network. To try to identify and resolve network problem, click Diagnose" after a couple of minutes.
View 1 Replies
View Related
Oct 20, 2011
How do I audit a network PC to see what it has on it or delete what does not need to be there. If I do it through the Windows add or remove they re-install. In the old days I could do it in DOS and then 'Tree' to list the properties and then delete what I wanted permanently.
View 1 Replies
View Related
Aug 20, 2012
i live in a dorm and i want to stream movies to my nexus 7 but i dont want to buy a nas. can i connect my external to a router [URL] and use that to stream movies. i dont need to be able to connect to it all over campus (i know that involves hacking the proxy) but mainly in my room would be nice.
View 2 Replies
View Related
Mar 10, 2013
win xp I work at a junior high school. A lot of the computers are part of a work group so they can share printers.
I'm having problems connecting to a printer. It has worked for a long time, it's still my default printer, but when I try to access it, it gives me a spooling error.
Now here's why I think it's a network problem.I can't access the main computer's network location (the one hooked up directly to the printer). All the other computers come up on the networkjust fine. And the one in question is only able to access very few computers in the network browser. let me simplify:
computer A/ brother printershared computer B/no longer sees A on network A/ sees only a small portion of other computers on network B/ sees all computers but A
Again, I don't think it's a spooler problem. It probably gives that error because it's a default printer with a lost connection.
View 10 Replies
View Related
Sep 18, 2012
I am trying to connect my wireless router into the wired ethernet so that i can create a private wireless network for our room. The thing is, my school realizes what you are trying to do and your browser only displays "you are attempting to access (college.edu) network on an unauthorized wireless network. My friend has made it work by turning off the dhcp with his airport extreme and setting it to create new network instead of extend, but after I turn off dhcp I dont know what i should put in for a static ip/ dns/ what to do at all. I can look at all the connections with ipconfig/all , I just don't know the magic things to put in after turning off dhcp to make this work. I have a netgear wireless wndr 3400 n600 router.
View 6 Replies
View Related
Jul 11, 2011
I work at a small private school that is going to implement about 20 ipads for classes. Students bring their ipods and iphones and are connecting to the existing unsecured wireless access points and are taking up the remaining IP addresses in the DHCP scope. I am running out of IP addresses and was wondering if I could set up a VLAN using the Cisco WRVS4400N for all of these wireless devices the students will be using. I plan to pull out all unsecured wireless AP's and replace with what ever solution we come up with. I will need about 6 access points/routers to cover the entire school. There is not a lot of money for technology and the ipods were donated. I have never set up a VLAN before. Is there an inexpensive way to allow the students with their personal ipads/ipods and the 20 ipads owned by the school to connect to a VLAN to keep from using up our DHCP IP addresses from the server.
View 1 Replies
View Related
Jul 2, 2011
I've tried looking for solutions on the windows seven forums and all over Google but none of them worked.The problem is, sometimes I get an "Unidentified Network, No Internet Access" error on my laptop (wireless). When this happens, the lan speed drops to 1.0 mbps and I get the "No Data Received" error when I try to load pages.My internet is on fine and my brother can access the internet fine on a desktop which is wired to the router and modem. My mom's notebook sometimes gets this error as well.
Is there any real solution for this problem or known compatibility problems between my WRT54G (version 1.1 I think) and Windows 7? Really need a solution to this, before I had to re-setup my whole connection, I didn't get such a problem. My laptop doesn't get the error in the school network either.
View 2 Replies
View Related
Feb 16, 2012
My adolescent son wants to create a server to host video games. We, the parents, want to separate our computers and files from all the crazy security risks my son and his friends take, while allowing them to learn by their mistakes.I want 2 separate networks, or does this make sense? Would love to have our computers (assorted PC's, Macs, both laptops and desktops, running Vista Ultimate, Windows 7, OSX 10.5 and up), ipods, TV's, Blu-rays, wireless printers, etc. isolated from our son's computers, ipods, TV's, XBox, Blurays, wireless printers, (as well as the digital stuff his friends bring over).Since security is the reason for this, would love any tips over and above Brian Posey's article on Tech Republic (5 common security mistakes people make on setting up wireless networks, or something like that)We have Optimum high speed (testing up to 65 mps) internet service and 5 static IP addresses to work with.
View 4 Replies
View Related
Feb 21, 2011
I have a 1Mbps adsl connection shared by 4, mine is wired & rest of them were via wireless. Its difficult for me to browse a single page in facebook & don't even think of the youtube videos etc.Is it possible to setup the qos static ip on the router or a certain speed (kbps) to my pc with any third party softwrae & the remaining speed would be shared by the others.
View 3 Replies
View Related
Nov 1, 2011
I have an ASA 5505 with a dynamic IP address from the ISP.What I need to accomplish is the following:
- Either setup that ASA (Dynamic IP)VPN with an IOS router (Static IP)
- Or setup that ASA (Dynamic IP) with another ASA (Static IP)
View 8 Replies
View Related
Jul 21, 2011
I have VOIP and was provided a modem, a Tilgen Router (Vood 452_A). I also currently have a Linksys WRT54G router. I also have a home surveillance system with a DVR that can be accessed via the net. I am trying to allow the ports to open so that traffic can navigate down to the DVR.My IPs:My VOIP has provided me with 6 static IP addresses. For sake of this issue they are:
67.xx.xxx.153, through .158My subnetmask is set to:
255.255.255.248My Settings:
The Modem is connected to world. To the modem I have the Tilgen Router connected. The Tilgen is set with an ip of .153 and the subnetmask listed above. DHCP is turned on and has IP range set for .154-.158. It is set in Bridge Mode with NAT and Firewall turned off. To that I have the WRTG54G router connected and assigned the router an Static IP of .154.. The cable is going into the Linksys WAN port.From a computer connected to a LAN port on the WRT54G, I see my public IP as .154, currently my internal IP is 192.168.1.15 so I believe I have to assign one of my Static IPs to this PC, however when I try to connect to the Linksys Router (.154) from the outside web, I am get a time out error. (also from a ping test.) My thoughts are to assign the Linksys to DHCP and use a range of .155-.158 to give each lan item a static IP. My question is will this work? Will each item in the network have its own IP and if I forward the port to the DVR that i needed, ie 80 for web client or 6100 for desktop client, will that forward through?Or do I set it to Router Mode and use the Tilgen to assign the ips.
On the Tilgen I also have an option for a DHCP relay or to turn off DHCP.
For clarification here is the setup chain
Broadband/DSL Line>>Tilgen Modem>>(LANPort1)Tilgen Router(LAN Port2)>>(WAN) Linksys(LANPort1)>>DVR/Computers
Found this walkthrough on setting the WRT54G into a Switch. If I did this, in theory the VOOD would assign those computers/dvr connected downstream via the WRT54G a static ip from my range set on the router. Then in theory I would not need to port forward port 80 since the DVR would be on its own public IP.?
View 7 Replies
View Related
Jul 1, 2012
I have 3 Dcs-3420's on the same network same static ip setup and they never have issues. Im testing 1 942L, I've upgraded firmware to1.11, but periodically the camera loses its ip address which is weird because it is set static. My wireless is set to Mac address security. Now camera is outside in a shaded area, over night the camera worked all night, this morning it has reset three times. Additionally, each time it resets/losses ip address it also loses the manually set time.
View 1 Replies
View Related
Dec 13, 2011
I upgraded from a WRT54GS. I have an XBOX that I am trying to setup a static IP for. Every time I try I get an error message stating invalid static route. All I am trying to do is set it up the same way my old router was so when I specify my XBOX as DMZ Host I don't have to worry about my XBOX ip address changing like it currently does.
Route name: XB
Destination LAN IP: 192.168.1.133
Subnet Mask: 255.255.255.0
Gateway: 0.0.0.0
I have also tried
Route name: XB
Destination LAN IP: 192.168.1.133
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.1
View 7 Replies
View Related
Apr 7, 2013
I am trying to setup the following. We have an RV042 Router and are using it as our gateway at the office. In the office we are using a Windows Domain abc.lan with DHCP of 10.0.0 - 10.0.0.254. The Router/Gateway is setup with a Static IP of 10.0.0.100.A couple of our office employees would like to work from home via VPN using their laptops. With the many options available for this router, I am not clear as to which options and what settings I should set.
View 2 Replies
View Related
Dec 19, 2011
I have a RV082.I need to set up a VPN form outside to use a Static address from the Lan side of the RV082.
Lan is 172.16.0.126
Wan is 10.161.48.1
The computer using the VPN will need a virtual IP on the Lan of the RV082 so that it is seen as being on the same network as the equipment on the LAN.
View 2 Replies
View Related
Sep 20, 2012
I have been using static NAT to map between a single server behind an ASA 5505 and a single public IP address. In other words, I've been doing this:
object network NAT_ME
nat (inside,outside) static interface
Now I would like to start using the clientless VPN feature of the ASA, so I of course don't want that particular port forwarded to the server. Is there a way to define such an exclusion? I've tried several things, including setting up a separate NAT rule to direct that port back to the ASA's interface, without luck.
If that is not possible, what configuration would I need to move to in order to get the behavior that I want? It is important that all (non-VPN) traffic is passed exactly as it arrives at the firewall (whether it is coming from internal or external), with the exception of changing the IP address (i.e., I need static port mappings for some of my services).
View 5 Replies
View Related
Sep 10, 2011
I am trying to set up a static IP address for my Toshiba Satellite L350 Wireless Laptop on Windows 7. My Broadband is on TalkTalk (UK) Huawai Echo-Life HG520b. I tried many sites but it never seems to work.
View 1 Replies
View Related
Nov 21, 2012
I'm working on setting up a template configuration for the Cisco ASA 5505 device that we'll use to configure more routers for various client needs. One of the requirements requested of me is the following: Internal hosts assigned a DHCP address are blocked from the internet Internal hosts with a static IP are permitted access to internet All internal hosts can communicate regardless of state
Now, I'm fairly new to this and I'm certain my terminology isn't correct so googling the problem has been fruitless. I have followed basic configuration guides and have configured the device to hand out DHCP addresses to hosts plugged in ports 1-7. If I'm plugged in and specify my address manually in the OS I am blocked from any access so I can only assume there is an access policy or some rule preventing me from authenticating against the router despite having set up VLAN1 to be the entire class C subnet. What sort of steps would I need to do to configure this? New access lists. For the record, the dhcp addresses are in the range of 10.100.31.64-10.100.31.95. VPN users are assigned an address from 10.100.31.220-10.100.31.240 and there seems to be no issues with that configuraiton. I don't wish to constrain what addresses a user can use should they specify a static IP (10.100.31.5 should be just as valid as 10.100.31.100).
View 10 Replies
View Related
Jan 18, 2012
How can I bypass the proxy of my school? I cannot access my emails since I am in the UK and my email is provided with a server in China, namely 163.com; the email means a lot to me as it is the only way I can keep in touch with my friends from my old school.
View 1 Replies
View Related
Sep 6, 2012
i have my laptop which i use at school okay and when i try and watch youtube videos at school it works fine but as soon as i try and watch them at home it just buffers and buffers and never loads, its definitely not the internet connection as my dad/mum/brother/ps3 can all watch youtube videos, and i dont know why this is happening.
View 6 Replies
View Related
Mar 28, 2013
Cannot load the login page for on line school portal, tried the basics cleared the cache, history turned off firewall for a test nothing works site works fine on my old computer so it is not the connection
View 1 Replies
View Related
Feb 7, 2011
create a new proxy to access Facebook in school.
View 1 Replies
View Related
Sep 26, 2011
1. Laptop wireless card works fine at home (wifi)
2. In the school wifi, it sometimes works and sometimes it doesn't work. e.g. I walk into a classroom and open my laptop, it works fine for 5 minutes and then no webpages will load for the remainder of the class and ping will not send another response.
This has happened in almost all classrooms so it can't be the location. There are some lucky times where I get wifi for the entire duration of the class.I asked several classmates beside me and no one else really had that issue so it must be my laptop. [code]
View 5 Replies
View Related
Mar 22, 2012
I am living on a boarding school and they have a filter set up so we cannot surf for porn and stuff... but the thing is that all other things are blocked and they want an url number make my school better for everyoneIts from a private server Molten WoW so i need them to unlock the Server oO
View 5 Replies
View Related
Oct 23, 2011
For a while now my girlfriend has been having problems trying to connect to her school website (my.pitt.edu) with the belgin g wireless router. It used to work a few months ago, tried to fix it then gave up. The only way she can access the site and do her school work from home is it she directly connects from the modem to the pc, but that takes internet away from the other pc in the house.I read a few sites months ago that it could be the school banned the routers IP, she called the school and they said it wasn't banned and that it might be a firewall issue. We tried disabling the firewall on the router and the pc but still nothing.
View 1 Replies
View Related
Aug 29, 2011
I'm an intern in an elementary school. We have here two administration computers in which I and all the teachers have access to. One of the teachers has told me that she cannot access her email (Microsoft Office Outlook 2003) from one of the computers.
View 5 Replies
View Related
Jun 29, 2011
Is there a way to set school day parental controls into the afternoon? During the summer months it would be very useful to set the time for access to late afternoon/early evening. It would seem that giving both AM and PM times is a simple fix.
View 9 Replies
View Related
Oct 17, 2012
We have a NETGEAR ProSafe™ 802.11g Wireless VPN Firewall FVG318 set up at work with a static IP so we can do a Voice Over IP from our sales office.Everything works fine until I plug in a computer that is connected to our digital printer, then the PC stays on the internet for a while, then crashes the connection.Once I plug in the PC to the network, the rest of the network has issues.
View 4 Replies
View Related
Apr 4, 2012
I've got a device that is not strictly speaking a 'desktop computer', but I communicate with it over the network - it's a video switcher, I use it for broadcasting.I'm trying to set it up with a static IP on my larger network, rather than just a local one, but in order to do that, it needs a static IP, and my network is setup with DHCP.I can assign it a static IP if I can get it's MAC Address - but there's the hitch.It's nowhere on the device itself, on the box, in the instructions.I ran "arp -a" in the console and found the IP it's currently assigned to, and the MAC address associated with that is:
7c:2e:d:0:68:ad
But that doesn't seem to be standard format. The :d: should have another character in with it, as should :0:
How can I convert this to standard format?
View 1 Replies
View Related
Mar 12, 2013
Today I installed the 1.0.2.6 Firmware on a RV180W. I only have now two problems regarding the Static DHCP support in the GUI.
1. Via the Networking > LAN (Local Network) > Static DHCP I have no buttons to Add a new static Lease.
2. Via the Networking > LAN (Local Network) > DHCP Lease Clients I can thick a Lease and click on Make Static IP. The result is an error: Operation failed.
View 3 Replies
View Related
