Cisco AAA/Identity/Nac :: ISE 1.1 On ESXi 5.0 - Show Application Status ISE

Apr 11, 2012

I have a very unusual issue with my installation of ISE on my VMWare ESXi 5.0 environment. but whenever I issue the command "show application statuse ise" I get the following output:

ISE Database listener is running, PID: 13675
ISE Database is running, number of processes: 27
ISE Application Server is running, PID: 15163
ls: /opt/TimesTen/tt1121/lib/*.jar: No such file or directory
ISE M&T Session Database is not running.
ls: /opt/TimesTen/tt1121/lib/*.jar: No such file or directory
ISE M&T Log Collector is running, PID: 15379
ls: /opt/TimesTen/tt1121/lib/*.jar: No such file or directory
ISE M&T Log Processor is running, PID: 15457
ls: /opt/TimesTen/tt1121/lib/*.jar: No such file or directory
ISE M&T Alert Process is running, PID: 15296

View 6 Replies


ADVERTISEMENT

Cisco Switching/Routing :: C2960 Password-recovery Status Show Command

Feb 9, 2012

I enabled the "no service password-recovery" command on my C2960 switch. All seems to work as discribed. Only issue I have is --- which show command is used to reveal if the password-recovery feature is enabled of disabled as the command doesn't show up in the running config after you enable it ?

NOTE: The command does show up in the C2960 switch in config t mode (unlike the IOS router 2800 series), but doesn't show up in the running-config after you enable or disable it.
 
On the 2800 series routers (latest IOS) in config t mode the command does not show up but if you type "no service passowrd-recovery" the command function correctly and it does list it in the running configuration.

View 1 Replies View Related

Cisco Switching/Routing :: 6500 Show Interface Status Output As VLAN

Mar 5, 2013

I have a really weired thing happening on 6509 device with one of my customers.The device has a SUP 2 (MSFC2) with version 12.2.18SXF17B.
 
any VLAN interface once administratively down or simply down shows on "show interface status" output as VLAN.While it supposed to show "Routed". However once the port is up it is shows "routed" like it should.

View 5 Replies View Related

Linksys Wireless Router :: E4200 - No Led To Show Connected Devices Status

Oct 31, 2011

I'm thinking of upgrading from my Linksys WRT54G router to the E4200 and though I've goggled. Also, are there no LEDs on this unit to tell you the status of what's connected?

E3000WRT-54GWVC-80N

View 3 Replies View Related

Cisco Application :: 4710 Session Persistence Status

Sep 14, 2011

I am new to Cisco ACE, I have a ACE 4710 MD running, I would like to know how can I know what session persistence is running on the ACE, I what to know if it is using soruce IP or any other persistence.

View 1 Replies View Related

Cisco Application :: How To Monitor Status Of Vips On 11503 Through SNMP

Sep 26, 2011

what is the OID  for See the hit status of the spefic VIP and  RIP coming under the VIP .apeart from this  CSS box having any module to moniter the hit status or VIP's and RIP's

View 2 Replies View Related

Cisco AAA/Identity/Nac :: ACS 5.1 With AD - Status Is Disconnected

Feb 23, 2011

I have a number of users who are failing wireless authentication. Using the troubleshooter i notice that its show message that Active Directory servers are not available. Under the Identity stores when i check on the connection status it shows disconnected. When i click on Test connection it shows successful. This ACS is a secondary. It has happened before and i removed it from the ACS cluster, rebooted it and rejoined it. Ran test connection and it showed "CONNECTED". Now it keeps showing disconnected.

View 6 Replies View Related

Cisco AAA/Identity/Nac :: What Is The Use Of Status Field In ACS 5.3

Aug 7, 2012

users whose status is manually disabled don not have difficulty in authenticating and access managing nework devices. that makes me wonder what is the difference between status enabled and disabled?

View 44 Replies View Related

AAA/Identity/Nac :: Status-Server Request And ACS SE 4.2?

Mar 31, 2013

According to traces collected in mt ACS SE 4.2, it would seem that the underlying software does not support the RADIUS Status-Server request. Is this request type is supported in version 5.*?

View 2 Replies View Related

Cisco Application :: Show Active Mac Pool On ACE20?

Oct 26, 2011

I would like to add a vlan to a second context on a pair of redundant ACE modules.  As soon as I open up that shared vlan box we will expose ourselves to mac conflicts until the shared-vlan-hostid commands can be implemented and the module reloaded.  Adding the commands is not a big deal but I may not be able to schedule a reload until next week.  What I would like to do is confirm the mac pools in use by each module right now. My hope is that they grabbed unique pools when they last booted and a conflict will not be a concern now. 

View 3 Replies View Related

Cisco Application :: CSS11506 Good Show Commands To Validate Failover

Sep 27, 2012

I am planning to perform a failover drill between active and standy CSS loadbalancers which are configured in a cluster pair.  I am looking for help to know what show commands I can run to validate that the failover occurred successfully from primary to secondary load balancer and that the VIP's have failed over successfuly as well.

View 1 Replies View Related

Cisco Application :: 5082 - Send Show Connection To Syslog Server?

Aug 8, 2011

Can i send "show conn" to syslog server? for example:
 
[code]...

ESTAB5082

View 1 Replies View Related

Dell :: XPS Studio 7100 - Bluetooth Application Or Drivers Do Not Show Up In Device Manager

Nov 4, 2012

I did a clean install of windows 8 and my tooth application or drivers do not show up in device manager dell xps studio 7100.

View 1 Replies View Related

Cisco Application :: Sample Command Output Of Show Chassis Inventory For CSS 11501 / 11503 / 11506?

Oct 30, 2011

I am trying to get a sample command output of "show chassis inventory" for:

CSS 11501
CSS 11503
CSS 11506

View 1 Replies View Related

Cisco AAA/Identity/Nac :: ACS 5.3 Show Two Mac Addresses

Apr 16, 2012

I have a solution of thre ACS.. one primary and two secondaries. My customer report me that in port of the switch where is connected the ACS show two mac address. [code]

View 1 Replies View Related

Cisco AAA/Identity/Nac :: How To Show Logged In Users In ACS 5.1

Sep 5, 2011

After some time no using Cisco ACS5.1, I still don't know how I can see all logged in users. I can see logging and check why an log in goes wrong, but in ACS 3.2 I just clicked on Reports and Activity and I could choose to see logged in users, or failed attempts, etc.

View 2 Replies View Related

Cisco AAA/Identity/Nac :: ASA 5520 / Username Does Not Show In CLI And ACS Logs

Aug 3, 2011

Why my asa5520 brings out:

sh curpriv
Username : enable_15
Current privilege level : 15
Current Mode/s : P_PRIV
 
while i am logging in with my username which is XXXX. And in my ACS accounting logs I cannot see which user did what.

View 2 Replies View Related

Cisco AAA/Identity/Nac :: ACS5.2 - Allow Show Running Configuration Without Enable

May 24, 2012

I am using ACS5.2 I want user to access the device with all necessary command like show run/ver/int/log… I try to set user privilege using Shell from 1 to 10 but show run doesn't work.

View 15 Replies View Related

AAA/Identity/Nac :: Accessing ACS 4.2 Via Https Getting Website Declined To Show This

May 25, 2011

I have a self signed certificate on an ACS 4.2 Windows machine. I open a browser port to https://ipaddress:2002 of the acs and get the certificate error message as expected. When I proceed to the site then check the certificate via the shield on the top of the browser it shows is issued to ACSCOSC216_7. I install the certificate via the IE certificate import wizard.I then connect to the acs via the poper fqdn at [URL] login with my account but now get;The website declined to show this webpage.

View 1 Replies View Related

Cisco :: LMS Prime 4.1 Setup On ESXi 5?

Jan 4, 2012

Is there any roadmap regarding the LMS virtual appliance to be supported on ESXi 5?

View 0 Replies View Related

Cisco Switches :: ESXi Management Not Working With SG500 LAG

Jan 8, 2013

I am setting up a 3 host ESXi cluster. I am using a pair of stacked SG500-28 switches for switching redundancy. Each host has 8 NICs. 4 to each switch. I have successfully setup a 3 NIC LAG with 1 path to one switch and 2 paths to the other. These LAGs work. When I setup a 2NIC LAG via the console for management, and the associated ports on the switches, I lose managment communication with the host. Before setting up the LAG in the ESXi console, I set that vswitch properties to us IPHASH as instructed here bit.ly/VLaTEt I have attempted to follow those instructions as closely as possible. The one thing that I am wondering is whether the SG series supports etherchannel. I can't find any reference. Either way, it works on the other vswitch that is for vMotion. I can vmkping between the hosts over that LAG. But setting up a LAG on the management vSwitch doesn't?

View 5 Replies View Related

Cisco :: Does PI Supports VMware ESXi 5.1 Freeware Version

Mar 4, 2013

Does PI Supports VMware ESXi 5.1 freeware version?

View 1 Replies View Related

VLAN Configuration On Debian Client In ESXi 4.1

Oct 12, 2012

I am having issues configuring a vLAN network card on a Debian stable (Squeeze) client.The client is running in a ESXi version 4.1 environment.There are two vLANs: vLAN 8 and vLAN 14. The client is in vLAN 14. The domain controllers (as well as DNS and ISA servers) are in vLAN 8. Windows clients behave fine and they can connect to other vLANs just fine. However, I just can't get the Debian client to connect to any other vLAN than its own.I tried several methods, and non worked successfully thus far.One of the problems is that the client should only use one IP address. Using the vLAN package, its assumed that you have a different IP for each vLAN (I think), so that doesn't work out.There is one other Linux machine in the network. An Ubuntu client being in vLAN 8. That client works as it should and can ping to both local, and other vLANs.Until this problem is fixed, it is impossible to connect to the internet (because the ISA, DNS and DCs are in vLAN 8) so each time I want to install a package, I have to download either the .deb packages manually, or download source tarballs and then create an iso of those files, mount the iso and install the packages. You can imagine how much effort that costs.

View 14 Replies View Related

Cisco AAA/Identity/Nac :: ACS 4.2 UCP Application Not Working

Apr 20, 2011

I have Cisco ACS 4.2 since few days users can not change their password, what could be the issue? Even after resetting the password I got error.

View 3 Replies View Related

Cisco :: ESXi 5.0 / Directory Level Access To Prime Infrastructure (1.2)

Dec 9, 2012

I am running PI1.2 virtual appliance (on ESXi 5.0). i had some issues and open a ticket to TAC. the TAC engineer requested me to send him the below:
 
/opt/CSCOlumos/logs/failed_inventory_feature.log
/opt/CSCOlumos/logs/ifm_inventory.log
.
.
 
My question is how do we get to the shell of PI1.2? i know we can get to the shell of LMS4.2. do we have access to shell of PI1.2 virtual appliance?

View 5 Replies View Related

Cisco AAA/Identity/Nac :: ACS 5.3 - Application Failed To Start

Apr 28, 2012

Although, ACS states its installed, after going through the startup. However when I do show application nothing comes up. When I do a application start acs, %Application failed to start.

View 7 Replies View Related

Cisco AAA/Identity/Nac :: 5.4 - Possible To Stop Acs Application Automatically

Jan 8, 2013

I have an ACS 5.4 which is integrated with AD and a RSA. Is there any possibility to Stop the ACS Application automatically if either of these devices are down.

View 2 Replies View Related

Cisco AAA/Identity/Nac :: Patch Application Procedure ACS 5.2?

May 4, 2011

procedure to apply the  5-2-0-26-4.tar.gpg  patch. I don't know how to get the patch file into the ACS server.The procedure in the "Read me" for the patch does not indicate anything about how to this:
 
1. open CLI console2. define new repository in which the 5-2-0-26-4.tar.gpg resides3. issue: 'acs patch install 5-2-0-26-4.tar.gpg repository YOUR_REPOSITORY'4. verify installation by getting the following version information via CLI by issuing:#show application version acs I  don't know how to put the patch file from my local machine to the  repository created in the GUI (if there is where the actual place to creat the repository).

View 3 Replies View Related

Cisco AAA/Identity/Nac :: ISE 1.1.0.665 Application Server Is Still Initializing

Sep 25, 2012

I had a working server running ISE version 1.1.0.665 but someone in the build room decided to pull the power out of the server rather than shutting it down correctly. I have booted the server back up however the web management page was not accessable. I have checked the server status and the end result is the Application Server in the "still initializing" stage. I have left the server for several hours and the status has not changed.
 
I know people have previously run into this issue but no one has posted any resolution or confirmed that a rebuild is the only solution. I have tried to create an on-demand backup but it seems to fail when attempting to provide the credentials (which are correct) for the FTP server.

View 1 Replies View Related

Cisco AAA/Identity/Nac :: Application Upgrade Of ACS 5.4 Manifest?

Oct 27, 2012

I'm trying to upgrade my ACS 5.3 (patch 7) to ACS 5.4 and I've downloaded the application bundle from Cisco. I'm transferring the app bundle via FTP towards the VM containing ACS, yet I ALWAYS get %Manifest File not found in bundle. I've opened the bundle and  found the manifest .xml inside.
 
I've double verified MD5 checks, size files, re-downloaded everything, even copied it to the local disk of the appliance. Also browsed through this forum to see that there are people having the same problem with other ACS version upgrades and besides re-downloading and using FTP there isn't a specific solution. I'm always getting this error. I know that it must be possible to do upgrade, but I'm stuck. I do see on the FTP server logs that the file gets transferred, but as pretty much as soon as it finishes transferring (not enough time in my view to extract a 1.2 GB file) I get an error
 
I'm doing the:
 
application upgrade ACS_5.4.0.46.tar.gz FTP
(...)
%Manifest file not found in the bundle

View 16 Replies View Related

AAA/Identity/Nac :: ACS 5.2 Application Upgrade Package?

Apr 12, 2011

what the "ACS 5.2 application upgrade package" is? I've seen this package on the download software area but couldn't find any document on this.

View 2 Replies View Related

Cisco AAA/Identity/Nac :: Rename Existing Username On ACS 4.2 Application

Mar 22, 2011

how can we rename an existing username on ACS 4.2 Application.I don't want to rename the group just the username.

View 3 Replies View Related

Cisco Switching/Routing :: Nexus 5010 And Qlogic 8240 CNA To Work With Esxi

Dec 6, 2011

I am trying to configure get the QLogic 8240 card to work properly in ESXi 5.0.  I want to be able to send the iSCSI traffic down the iSCSI portion of the card and use the ethernet portion of the card to do NFS. 
 
Here are my vlans I am working with..
 
vlan 420 = fcoe
vlan 500 = NFS
vlan 1000 = iSCSI
 
I have my interface currenly set as the following on the Nexus 5000.
 
interface Ethernet1/17
[Code]...

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved