Cisco AAA/Identity/Nac :: ACS 5.1 With AD - Status Is Disconnected
Feb 23, 2011
I have a number of users who are failing wireless authentication. Using the troubleshooter i notice that its show message that Active Directory servers are not available. Under the Identity stores when i check on the connection status it shows disconnected. When i click on Test connection it shows successful. This ACS is a secondary. It has happened before and i removed it from the ACS cluster, rebooted it and rejoined it. Ran test connection and it showed "CONNECTED". Now it keeps showing disconnected.
I just installed nVidia Nforce drivers for my Asus 750i motherboard, I show I have internet connection, however I can not get windows to pull up a site. TRIED everything reset modem, router, checked all settings. When I pull up the networking system information, it states connection status: disconnected via the Nvdia controll panel. Reset everything back to factory defaults still nothing....IT was working, I intalled I tunes, and then it stopped....I uninstalled Bonjour thinking that it might be the issue....nothing
I managed to connect acs5.1 to the AD , user's will be able to get authenticated against the AD when the state is shown "CONNECTED'. This will work ok for a day or so and goes into a 'DISCONNECTED' state , users will no more be able to authenticate . Is this a known error , or is this an error from the microsoft ws2k3 server side ?
users whose status is manually disabled don not have difficulty in authenticating and access managing nework devices. that makes me wonder what is the difference between status enabled and disabled?
According to traces collected in mt ACS SE 4.2, it would seem that the underlying software does not support the RADIUS Status-Server request. Is this request type is supported in version 5.*?
I have a very unusual issue with my installation of ISE on my VMWare ESXi 5.0 environment. but whenever I issue the command "show application statuse ise" I get the following output:
ISE Database listener is running, PID: 13675 ISE Database is running, number of processes: 27 ISE Application Server is running, PID: 15163 ls: /opt/TimesTen/tt1121/lib/*.jar: No such file or directory ISE M&T Session Database is not running. ls: /opt/TimesTen/tt1121/lib/*.jar: No such file or directory ISE M&T Log Collector is running, PID: 15379 ls: /opt/TimesTen/tt1121/lib/*.jar: No such file or directory ISE M&T Log Processor is running, PID: 15457 ls: /opt/TimesTen/tt1121/lib/*.jar: No such file or directory ISE M&T Alert Process is running, PID: 15296
Recently our ACS loss connection to AD. Notice following error message (collect from show tech):
Dec 9 00:05:31 OasPrp-Lvl07-ACS01 adclient[24514]: INFO <bg:ageBindings> base. bind.healing Lost connection to myhqkul990003s.simedarbygroup.com. Running in di sconnected mode: KDC refused skey: Preauthentication failed
[Code]....
However we manage to restore the connection by reset password of the AD account that used in establish connection between AD and ACS.
I have deployed the NAC Solution. NAC Software version = 4.8.2 and Agent version = 4.8.3.1.The solution is working fine but the Cisco IP Phone CP9951 is getting restart after applying NAC (or port profiles) at some time interval. Time is not fixed but it doesn't seem stable. Sometimes, it is just disconnected while using the Phone and sometimes when you log-off or restart the PC.The Cisco IP Phone CP8945 is working fine in all cases.We are getting the message of "Phone not registered" and active call is getting disconnected.
I just got a new modem with built in router. and for the first few days i had my internet running pretty perfectly until recently when i just keep getting disconnected from it and then reconnected. i try to troubleshoot; it says that i DONT have a fixed DNS. i am pretty bad at networking.
My computer keeps getting disconnected from the internet at random times. Every day it happens and resetting my computer works, or waiting about an hour or so. I have a static ipv4, 192.168.1.8 so i can port forward for a game server, and maybe someone else on my network gets the same ip because I don't know how to block people from using the same ip. Linksys router. Not sure what exact but do you need it?
My wife is using a laptop (wireless) and I am using a custom built PC. We have AT&T DSL I believe its a 6mb connection. Anyways, only sometimes when my wife is surfing the net do we both get disconnected. i have a 2wire Gateway (I thought it was also a modem/router). It doesn't seem to DC us when shes playing like xbox games (windows 8 on the ultrabook)...but when she gets on the internet it does it..but not all the time. I was thinking maybe it was DCing because we were putting to much on the gateway.
Desktop: Using ethernet...custom built PC (previous pc was a HP...same issue) Ultrabook: HP Envy 4-1115dx (previous laptop was a compaq...same issue) Gateway: 2Wire 2701 HG-B
Mine is connected to the router that is in my room, my big brothers pc cannot get a stable connection, when i access the Network and Sharing center, it says Local only and then when i try to repair it goes to local and internet access but then when the troubleshooter finishes it goes back to local only!?
We have WLC 5508 installed in our premises to which 80 1242AG APs are connected. Few days ago, all the APs all of a sudden disconnected from Controller and rejoined after 12 to 15 hours. when we try to investigate, there was regulatory domain conflict occur. But we didn't understand that those APs were configured with the same config before. How come they got diconnected and now rejoined without changing any configration in WLC?
On my Switch (3750), i have a host connected. Checked the interface status and it shows as "connected". However, when i tried checking the MAC connected to that interface, its not showingI have my Switch (3750) connected to a Router (3845). On the Switch, i have a printer connected in an interface. I am seeing the Printer's MAC associated with the switch port. However, when i checked the ARP table; no entry seen for the Printer's MAC. What are the possible reasons for this? We have several same kind of devices connected to network and they are fine.
I do terminal monitor on my 4500 switch.I can't see the status of the interface ( when it become up or down)What is the problem? I need to add a command?
I want to use 1841 router for implementation in one project but I could not find out from where I can get End of Sale, End of Life and End of Support details for this router, any links so that I can dig out Cisco is maintaining these details at some of its portal but where.
requesting information via SNMP from my two stacked C3750X, running IOS 12.2(55)RE5. The stack is up and running and everything is just fine. There are three PowerSupplies installed with a PowerStack, also running like expectet.My problem ist to get the status-information about the chassis-fans. I couldn't find any information about the OID and the search results only in some non-useful information about the MIBs from Cisco which delivers only three information about installed fans (and fan-containers), so I guess these are the information about the fans included within the powersupply?! The chassis-fans are installed and the LEDs are green for all four fan-mounts, up and running.
i have a router 1841 series and LMS send me amessage telling me the VPN AIM is not working on thsi device and i want to check the status of this VPN card
My dad just had to send his Acer Aspire back to the manufacturer to get the fan replaced. It came back factory reset and would not connect to any internet wired or otherwise. He called me and I asked him to bring it over. I can get it to connect to via Ethernet at my house, however, wireless is a no go. The status bar goes between "no connection available" to showing my network with two bars. When I attempt to connect to my network I get the standard "Window was unable to connect to this network". I currently have another PC, a PS3, a smart phone, and a tablet all connected with no problem (and all at full bars), so I know it's not the router. I ran an ipconfig /all and this is what I got: [code] One thing I did notice is that my IP Routing Enabled was set to NO and when I looked at how to fix that it said to update a registry key.
I am having problems with my internet connection through my desktop but my laptops are still working. From searching this site it appears to be a media disconnected error. Most of the fixes I have seen have been for laptops but I am having trouble finding fixes for a desktop (ethernet connected). Can somebody attach a link if this has already been coverered (I am sure it has but I just can't find it). I have a Compaq computer running Vista Service Pack 2.
I have a logitec LAN-WH300ANDGR(not logitech) wireless router, it's been working fine for months. Yesterday I enabled port forwarding, but after that I kept getting disconnected from the internet.I updated the router, but no joy.So I disabled port forwarding but I still get disconnected and now I cannot access my router's webpage [URL] the page will not load.
I was able to connect smoothly to any preferred connections in my area including my own. But now, it doesn't let me connect wirelessly to any of them. Now I typed ipconfig and this is what showed up.
I have just upgraded a laptop to vista, I didn't have any internet connection until I used a dongle to connect, after connection, it downloaded drivers to computer. Wireless now works without the dongle. I have no wired connection as it says "Media Disconnected." If I look in device manager, everything is working fine. I have looked on the net & tried a lot of checking various things but still no connection on lan. This is on an old laptop a advent 7109A. It was working fine on all connections until I upgraded.
I got a new router, a Cisco Linksys EA3500, and everything works fine and no one else in my family notices anything wrong. Everything works and I don't have trouble accessing the internet, but whenever I play a game online it will disconnect me after a while. Sometimes it disconnects me after 5 minutes and sometimes after 30 minutes. I have this problem with every game I play, except for Runescape. The weird thing is that I talk to friends on steam when we are playing and it doesn't get disconnected I can hear them fine, and my internet access bar at the lower right doesn't say I'm disconnected.Streaming and downloading work as well.I tried to port forward and I assumed it would work but I still had the same disconnection problem. I tried to port forward again but this time I used the tool at portforward.com to check if they were forwarded properly and it said your port is not open or not reachable. I tried this with a lot of random ports and it said the same thing.
I have tried everything, port forwarding, switching wires, and resetting my router. NOTHING WORKS! I get disconnected every 15 minutes and i can even send messages to people.
I have been having issues with my wifi for the past one week, I earlier had a NETGEAR router which was 2 years old and keeps getting disconnected. I thought it could be a router problem and bought myself an edimax couple of days ago. This one is much worse, it keeps getting disconnected very 20 mins. I have an iMac, alienwareX51, think pad Lenovo, iPad, iPhone, ps3 and BB.
I randomly get disconnected from the online applications that I'm using.(Msn, skype, online games, etc.)And I'm running this program in the background to check what's going on.As you can see, everything is normal till I get 0 ping for a couple of times, then it immediately goes back to normal till it hits 0 ping again.It's very random, it happens on the 345th hop or 789th etc.I'm on a wi-fi connection but not using wireless modem.The cable's plugged to my computer.
my internet modem dc quite often i mean sometimes its 1 or 2 hours sometimes its not, so we are planning to switch the modem soon, but before that i found out something strange, its like in order for us to reconnect back to internet we have to reset the modem, heres the thing. after reset, my brother's pc will immediately connects back to teh internet, but mine pc wouldnt, i meanmy skype will work i can tlk to my friends on it and such, but i have to wait for like 5 mins or so to resume back to the net on firefox/ other internet dependent program, just not skype though.
when i open up my network connections tab, i see two icons: "Wireless network Connection" and "Local Area Connection"
It clearly says a cable is unplugged, but no cable is unplugged and i am 100% sure of that.
when i type "ipconfig" into command prompt, i see all these things that say "tunnel adapter Local area connection" and it says media disconnected.
how would i go about "Connecting" the media? i am concerned about this issue so much because, even though i can connect to the internet (ip:192.168.1.1) i cannot connect to my printer (ip:192.168.1.4) and when i tracert the printers ip it says "media disconnected" so i know the two errors correlate to one another.
I just installed the free vpn client spotflux. The connection works fine, but after I disable the vpn again windows 7 seems to not use my "normal" ethernet connection anymore. I'm pretty sure that it will use that connection if I deinstall spotflux again but how to configure windows to use the normal connection when the vpn is not connected?I've attached a screenshot of the LAN connection settings and the priority list - but still it doesnt seem to work. What am I doing wrong?
Can't connect to the wireless network that is in the next room but I can connect across the street, I keep getting the message that the LAN Media connection is DISCONNECTED on connection 2, the computer trys to RENEW the IP address but can never do it, I have run CMD propmts pconfig/release, ipconfig/renew, ipconfig/all nothing works for my home system yet my laptop is connected my tower is running on the guy across the street.
Tech Support Guy System Info Utility version 1.0.0.2 OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit Processor: Intel(R) Celeron(R) CPU 2.93GHz, x86 Family 15 Model 3 Stepping 4 Processor Count: 1 RAM: 503 Mb Graphics Card: Intel(R) 82845G/GL/GE/PE/GV Graphics Controller, 64 Mb Hard Drives: C: Total - 78523 MB, Free - 64075 MB; Motherboard: ASUSTek Computer INC., Govii Antivirus: Spy Sweeper with AntiVirus, Updated: Yes, On-Demand Scanner: Disabled
