I have an ACS 5.4 which is integrated with AD and a RSA. Is there any possibility to Stop the ACS Application automatically if either of these devices are down.
View 2 RepliesInternet explorer closes automatically?
View 1 Replies View Relatedi have a server with windows server 2003 that SQL server 2008 is installed on it.regulary server service will be stoped automativcaly and all shared folders will be unshared and i must restart server and waiting for next stop and .
View 1 Replies View Relatedi have been facing strange issue on FWSM (6509 switch). we have created a vlan inteface for server farm on fwsm and its stop responding automatically and we need to give shut/ no shut command under that interface to back into normal .
View 11 Replies View RelatedI have a client that I recently replaced their GSS's for and last evening I cut them over to an HA pair of ACE 4700's. After about an hour, it looks like the GSS and ACE stopped communicating with each other. When this happened, they switched back over to the old CSS appliances and everything came back up fine. Apparently this happened the last time they tried to cutover to the ACE and they contacted TAC. TAC told them the issue happened because the GSS's they were running at the time were EOL. So now, with brand new GSS's, they are experiencing the same issue.
As of now, the ACE's are offline and I cannot get into them to see what the issue may be. We tested the sites out last night after the cutover and everything seemed fine. There was one minor problem that I resolved quickly, but that was it and then we left. The client started getting emails about an hour later about their main website being down. They do have the ACE logging to a syslog server, so we will look at that to see if there is anything relavent. I suggested that we bring up a test site to use through the GSS/ACE and see what happens. They have another CSS that they can run their sites through, so this option will work without taking down all of their other sites.
This coming from multiple servers, but mostly its generated by the most utilized ACS server.At this time, we are running ACS 5.3.0.40.6
No impact just annoying alarms. How to stop these alarms ?
Am using OOB modems on network resource routers used as aaa clients.Nothing connected to ACS console ports.Only 8 character usernames with AD.
I do see a few software defect / enhancements for ACS ver 5.3. When they will be fixed / enhanced?
Is there a way I can get the ACS (5.3) to email some of it's reports on a schedule?I'm hoping to send automated summaries of failed logins to the service desk each Monday morning.
View 3 Replies View RelatedI have a Cisco ACS 5.2 and have set it up as a RADIUS server. I was wondering if there is a way to add and update users automatically? We have a large number of users > 1000 that need to be added into the system and I don't want to do this manually. These users also update their passwords on a regular basis so I would need a script that would update the users automatically without any user intervention.
View 4 Replies View RelatedIS there a way to stop the Radius/Tacacs service in ACS 5.2 from the GUI ?
View 6 Replies View RelatedI have Cisco ACS 4.2 since few days users can not change their password, what could be the issue? Even after resetting the password I got error.
View 3 Replies View RelatedAlthough, ACS states its installed, after going through the startup. However when I do show application nothing comes up. When I do a application start acs, %Application failed to start.
View 7 Replies View Relatedprocedure to apply the 5-2-0-26-4.tar.gpg patch. I don't know how to get the patch file into the ACS server.The procedure in the "Read me" for the patch does not indicate anything about how to this:
1. open CLI console2. define new repository in which the 5-2-0-26-4.tar.gpg resides3. issue: 'acs patch install 5-2-0-26-4.tar.gpg repository YOUR_REPOSITORY'4. verify installation by getting the following version information via CLI by issuing:#show application version acs I don't know how to put the patch file from my local machine to the repository created in the GUI (if there is where the actual place to creat the repository).
I had a working server running ISE version 1.1.0.665 but someone in the build room decided to pull the power out of the server rather than shutting it down correctly. I have booted the server back up however the web management page was not accessable. I have checked the server status and the end result is the Application Server in the "still initializing" stage. I have left the server for several hours and the status has not changed.
I know people have previously run into this issue but no one has posted any resolution or confirmed that a rebuild is the only solution. I have tried to create an on-demand backup but it seems to fail when attempting to provide the credentials (which are correct) for the FTP server.
I'm trying to upgrade my ACS 5.3 (patch 7) to ACS 5.4 and I've downloaded the application bundle from Cisco. I'm transferring the app bundle via FTP towards the VM containing ACS, yet I ALWAYS get %Manifest File not found in bundle. I've opened the bundle and found the manifest .xml inside.
I've double verified MD5 checks, size files, re-downloaded everything, even copied it to the local disk of the appliance. Also browsed through this forum to see that there are people having the same problem with other ACS version upgrades and besides re-downloading and using FTP there isn't a specific solution. I'm always getting this error. I know that it must be possible to do upgrade, but I'm stuck. I do see on the FTP server logs that the file gets transferred, but as pretty much as soon as it finishes transferring (not enough time in my view to extract a 1.2 GB file) I get an error
I'm doing the:
application upgrade ACS_5.4.0.46.tar.gz FTP
(...)
%Manifest file not found in the bundle
what the "ACS 5.2 application upgrade package" is? I've seen this package on the download software area but couldn't find any document on this.
View 2 Replies View RelatedI have a very unusual issue with my installation of ISE on my VMWare ESXi 5.0 environment. but whenever I issue the command "show application statuse ise" I get the following output:
ISE Database listener is running, PID: 13675
ISE Database is running, number of processes: 27
ISE Application Server is running, PID: 15163
ls: /opt/TimesTen/tt1121/lib/*.jar: No such file or directory
ISE M&T Session Database is not running.
ls: /opt/TimesTen/tt1121/lib/*.jar: No such file or directory
ISE M&T Log Collector is running, PID: 15379
ls: /opt/TimesTen/tt1121/lib/*.jar: No such file or directory
ISE M&T Log Processor is running, PID: 15457
ls: /opt/TimesTen/tt1121/lib/*.jar: No such file or directory
ISE M&T Alert Process is running, PID: 15296
how can we rename an existing username on ACS 4.2 Application.I don't want to rename the group just the username.
View 3 Replies View RelatedWe upgraded a CSACS-1121 from ACS 5.2 to ACS 5.4 with CLI Application upgrade ACS_5.4.0.46.0a.tar.gz FTP After ACS reboot, services never start... After 15 hours, we always get same message:
ACS/admin# show application status acs
Application initializing...
Status is not yet available.
Please check again in a minute.
We installed patch 5-4-0-46-2.tar.gpg but we got same issue for 2 hours ...What could I do?
This is the error message I am getting on our ACS 5.1 appliance - is there anyway to purge the database or compact the file?
View 1 Replies View RelatedEverytime I make a config change to one of the contexts on our ACE20, I get this message: Config Application in Progress. This command is queued to the system
If I run show download info, I get:
context : context1
Interface Download-status
--------------------------------------------------------------
187 In Progress
199 Pending
Regex download optimization status : Couldn't get status[TNRPC Timed out]
It eventually seems to complete, but it takes a very, very long time. We are running Version A2(3.5) [build 3.0(0)A2(3.5)].
Report run via Individual Web server URL’sThe report takes less than 20 minutes (average 15 minutes) to fetch and return the data. This is observed 9 out of 10 times.Report run via ACE Load Balanced URLThe report keeps on running for more than 20 minutes and never completes. The front end keeps showing report is running.The data in general when tested directly by running queries against the database (bypassing the platform) completes in 15-18 minutesThe network connectivity for each and every ports involved (Loadbalancer/Servers) have been throulgly checked.
View 6 Replies View RelatedHow to set up time automatically in DI-624. I know that is old, but I need to syncro with an NTP.
View 3 Replies View RelatedI am taking an introduction class to CCNA and we are focusing on the Application Layer,and I'm having some difficulty in understanding what is an Application Layer Service. Is the Application Layer Service the same as Application Layer Software?
View 3 Replies View RelatedMy bootvar is set to boot up images from disk0. The 6500 series switch has two redundant supervisors.Each supervisor has a PCMCIA card with the exact same IOS images in the 0 slot. The secondary supervisor is given the disk name slavedisk0 and the primary is simply disk0
View 2 Replies View Relatedis it possible that a public IP can be automatically routed to another public ip.For example I have two routers A and B. router B has a LanB in 10.0.0.0 network and the public ips are in the x.x.x.0 for internet access. router A is located at a remote location and has a public ip of y.y.y.0 network.
View 8 Replies View RelatedHow can I configure the CiscoWorks to automatically update the config files when a configuration change occurs.
Like in LMS 2.1:
Resource Manager Essentials > Administration > Configuration Management > General Setup
Change Probe Setup
Listen to Syslog Messages
how to stop hackers?
View 4 Replies View Relatedhow to stop LAN viruses harming my pc even fails the antivirus softwares.
View 3 Replies View RelatedWhenever I start a Cisco VPN from any machine on the network, DNS requests to the DIR-655 stop working. If I reboot the router, DNS starts working again (the VPN was left on). Why starting the Cisco VPN would freak out the router?
View 3 Replies View RelatedI just want to review any unwanted traffic coming to my device , especially hackers that trying to crack and hack my cisco 5505.
View 4 Replies View Relatedi am getting around 12 emails a day returned mail demon and i havent sent them my friends are gatting sick of this every time they log on
View 1 Replies View RelatedWhy doesn't my PC automatically log into my wireless network when I turn it on,it try's to use a BT hotspot which is nothing to do with me so I have to manually select my network and log into it.How on earth do I stop this happening?
View 2 Replies View RelatedI have 2 wireless dvd players. In the past they automatically connected to the network on startup.I was making adjustments on the netgear wndr3700 router while experimenting with some cameras.Now I need to use the WPS option on the dvd player and then run to the router and push the WPS button.hen it connects.
View 1 Replies View Related