We have a cisco asa 5505 on which we have setup a group VPN. The VPN connections from all cisco vpn clients works fine except one. The keep getting the below error
"Secure VPN Connection terminated locally by the client. Reason 412: The remote peer is no longer responding. Connection Terminated".
Not sure why only one client won't be able to connect. The version we are using is 5.0.02 for VPN client.
I'm unable to have any internet connection for my new setup.
here's the overview.
Current setup is
Internet -> Router -> PIX 501 -> Switch -> clients
Internet -> static ip given is 210.193.34.1 - 210.193.34.6
Router -> Static ip assigned for NAT/External is 210.193.34.1, Local ip is 192.168.1.246
PIX 501 setting ->
IP to Router, According to router screen is 210.193.34.2, but not sure what settings are done in the PIX itself as I'm unable to access it.
local ip is 192.168.1.1
Clients - > 192.168.1.0
Old setup is working fine and connected to internet. for the new setup, as i do not want any downtime for the old setup.
As you can see, there are two firewalls connected concurrently to the router. I've configured it this way.
Internet -> Router -> ASA 5505 -> Switch -> clients
ASA 5505 setting ->
IP to Router NAT/External/ Outside Interface, 210.193.34.6 (Or do i set as 192.168.1.0?),
local ip/ Inside Interface is 192.168.2.1
Clients - > 192.168.2.0
some setup details.
security policy, NAT, set to default. routing is route outside 0.0.0.0 0.0.0.0 210193.34.6
I'm unable to access after a week of troubleshooting.
i have a question about tunneling a software EasyVPN client to a client ASA Network. It looks like this:
EasyVPN Server 192.168.202.0/24 Network extension mode to Client EasyVPN ASA 192.168.1.0/24 This works fine in both directions. But now i want to connect the client ASA network via EasyVPN software client from outside. The user are already able to connect to the ASA Server on its static outside IP obtaining an IP from a 192.168.21.0/24 pool. This works fine. But how am i able to connect to the 192.168.1.0/24 network from this client?
I am working with a small off that has a 5505 acting as a basic firewall. Behind it are off-the-shelf unmanaged switches. Two users have to work with an outside vendor and are having issues. They have a Sonicwall remote VPN client on each of their desktops and use this to connect to the vendor. They then RDP into VMWare-based Windows 7 desktops at the vendor's site to do their work. Randomly throughout the day (6-10 times per day) while they are actively working the RDP session will disconnect. It will auto-reconnect after a few seconds. The VPN log on the clients never show any issues. I believe this is an RDP problem because while the RDP session is disconnecting, their VPN client is not (it is set to NOT auto-reconnect if it gets disconnected so that I will know for sure if it gets disconnected). I don't see anything in the ASA's logs about denying connections involving their PCs and the remote VPN peer IP.
View 7 Replies View RelatedIs there any way to always assign the same IP address to an AnyConnect VPN client logged into an ASA 5505 running v8.4?2
View 2 Replies View RelatedI get the following error when trying to connect a vpn client through an ASA5505 with an already configured ipsec AES/256 site to site connection:
regular translation creation failed for protocol 50 src:inside:192.168.1.167 dst:outside:xx.xxx.x.64
The site to site addressing is not relevant, I'm not trying to pass traffic over the site-to-site, but rather create a new vpn from inside client to outside external vpn box that's not under my control. The client is able to create a connection, but no traffic is passed, when I try to ping / rdp, the above message is returned to me. If I add the rule static(inside, outside) interface 192.168.1.167 netmask 255.255.255.255 then it works, everything works, but ONLY from this computer.
Been Google for hours, but with no result as of yet.
I need to use a Cisco ASA 5505 on a BT Openreach connection, The configs that I have ben using are below -
interface vlan2
nameif outside
security-level 0
[Code]....
Got some issues when setting up IPSEC/VPN on the asa 5505. I want to connect from the ipad with the built in IPSec client..Get these errors when i run the debug crypto isakmp.
View 6 Replies View RelatedBelow is my VPN config in my 871 and radius user config. I am unable to connect to the vpn using Cisco vpn client. I am getting one of two errors depending on what config changes I make.I believe I have the radius configured correctly because it is authentication but not 100% sure.
[code]...
we have ASA5510 with version 7.x and asdm 5.X, i upgraded it to 8.3 and asdm 6.2, and i got vpn peers 250 and 2 ssl.when i try to connect through client software , i can see in the logs UDP 500 port is created as shown below. [code]
and currently in right panel of Active Algorithms i have only RC4-SHA1,
I have created a VPN connection for ASA 5512-X by using the wizards and nothing seems to be wrong on the wizards's config.I am able to connect to the network by using the VPN but unable to ping internal network.Below is my config for your reference:
Result of the command: "sh run"
: Saved
:
ASA Version 8.6(1)2
!
hostname FAA-ASA-1
enable password crzcsirI44h2BHoz encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
[code].....
I just tried to configure my ASA but unable to ping. My setup is as follows:
Cable Modem (DHCP from IPS)---> ASA (192.168.1.1)--->Belking Router (192.168.5.1)--->Switch (192.168.5.14)--->
ASA Version 8.2(3)
!
hostname WoodHomeASA-1
[Code].....
First time attempting to set up a 5505. Trying to replace a snapgear firewall and replicate the settings to the 5505.
View 12 Replies View RelatedI have a command line from ASA 5505 like below :
nat (inside) 0 access-list NO_NAT
The problem is I cannot see any matching ID of 0 at the (outside) like :
nat (outside) 0 xxxxxxxxxxxxx
Another problem is there is also no any access list with the name of NO_NAT.
I am using ASA 5505.Below are my sh run.I am not able to ping my gatway i.e 182.73.131.89
interface Ethernet0/0
description Internet Interface
switchport access vlan 61
!
interface Ethernet0/1
description office Internet
switchport access vlan 50
[code]....
Does anyone has had a problem with connection an asa 5505 with att? I can't connect the vpn, the tunnel sometimes open but still cant ping anything. Only public ip's even im able to ping to my firewall ip.i tried pppoe and bridge on the modem. The same configuration works on cable DSL but cant get it work on att.
I already have an acl that allow any any inside and outside. To get the pings works and a lot of stuff on the internet i search. Seem to be that there's a lot of problems between asa 5505 and att.
I have ASA 5505 and I save the configuration in the ASA 5505 using write memory or using copy run start but whe i unplug the power cord and plug it back in the ASA gets its factory default configuration.
View 8 Replies View RelatedI have config ASA 5505 and it is conencted to layer 3 switch that connects to cable Modem.
ASA is config with DHCP option and PC is able to get the IP from ASA. But from PC i am unable to access the internet. From ASA itself i am able to ping the Websites fine.
ASA has config with DHCP for inside and also it is doing NAT.
When i connect the ASA directly to Cable modem then pc is able to access the internet.
I have setup 5505 ASA for Testing purposes. It has static route to layer 3 switch on outside interface that goes to the internet.
ciscoasa# sh route
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
[Code].....
I am unable to Telnet/SSH/RDP from my inside network to my DMZ. I am not sure where the problem lies, I am able to use VNC from the inside to the DMZ (ports 5800, 5900), and also establish connection on Ports (26700-26899). I have a computer connected directly to the DMZ and those services work to all networks on the DMZ.I have attached Logs of successful VNC connections, unsuccessful RDP and Telnet sessions, and the running config.
View 23 Replies View RelatedI configured a new Asa 5505 with Ios 8.44-1-k8.bin and when I installed the Asa the client's after about 1 hour were unable to ping or map drives to the Asa. I got the following error,%ASA-2-106007: Deny inbound UDP from XXXX to XXXX due to DNS Query. I added the command same-security-traffic permit intra-interface they were then able to ping the server and connect to the Internet, but still unable to map drives i could see the connections from the Pc's to the server in a show conn with was tcp port 445 with Saa? I reverted back to Ios 8.25 and everything works.
View 2 Replies View RelatedWhen I have a computer directly connected to the Cable Modem I get 9.84MB Down and 1MB Up. When I put it behind the ASA 5505 with policing on the interface, I only get 4MB Down and 660Kb Down.What I'm wanting to do is setup this up to enable my VoIP to have a higher priority and shave 128kon both the Up/Down for the VoIP traffic. I also want to make sure I don't exceed the inbound and outbound thresholds.I''m using a 5505 Security Plus?
View 3 Replies View RelatedI have 2 subnets bought from my provider 194.102.98.128/27 and 194.102.98.160/27.
From my provider a have the following setup:
IP Address: 86.120.151.66
Netmask: 255.255.255.128
Gateway: 86.120.151.1
DNS (1): 213.154.124.1
DNS (2): 193.231.252.1
My IPs are static routed by my provider thought 86.120.151.66 .
On the firewall I have the following set-up:
Outside Interface: 86.120.151.66/25 security level 0
DMZ interface: 194.102.98.129/27 security level 50
Inside Interface: 194.102.98.161/27 security level 100
0.0.0.0 0.0.0.0 [1/0] via 86.120.151.1, outside
Everything works perfectly except when I try to sent an email. The email gets sent (eventually), but afert a long waiting time, 45-60 sec. The connection is opened instally to the server but then just hangs there for 40-50 sec. The problem is that a have an aplication on a server that has to send confirmation emails, and that aplication is limited to a 30 sec timeout for conecting to the mail server, much less then the 45-60 sec that I have now. The mail server is hosted by a data center, it is not in my networks (location).
I have tried deleting the ESMTP inspection, that doesn't work. Pinging my mail server rezults in a average time of 20 ms. And when a do a tracert the hight value in a hop doesn't usually pass 80 ms, the average is 20-25 ms.
The problem is ONLY when sending emails. Everything else works perfect, including receiving emails from the same server.
My running config is:
hostname ASA-Adisys
domain-name Intern.ro
enable password 0./39zRW9yhKK/bO encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
Remote LAN pool is configured as inside. Route is proper. I am able to open 443 port from the remote LAN pool on the ASA. That means, the port is open from the remote pool. No response if I try https on the browser.
View 11 Replies View RelatedI found a tricky task for our ASA 5505 firewall. I am not able to go internet when using DHCP but I can access by using fixed IP address in client PC.Same IP, Same Mask, Same DNS, Same Gateway. All the same but no hope. Any configuration i missed in firewall?
View 5 Replies View RelatedI have ASA 5505 with base license. I created 3rd vlan on it.it was created. but i am unable to assign IP to it. i assign ip address it takes it. But when i do sh int ip brief it does not show any ip.
Code...
i can't get it working to expose on internal server to an outside interface.I used the public server function in ASDM.Internet access works if i nat my private adress to one of the available ipadresses provided by our isp.
Internal Server : owncloud 172.10.0.4
External Server : ext181 46.245.171.181
I can't see the error in the configuration,
: Saved
:
ASA Version 9.1(1)
!
hostname rhedetest
domain-name xxxxx.de
enable password 59t92OvRofWL9yf3 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
[code]....
I have upgraded an ASA 5505 to 9.0(1) as I would like to use ipv6 version of dhcprelay. That said, I am unable to obtain a global unicast address but the link-local address is able to communication with the ISP's gateway/DHCP provider which I hope will allow v6 dhcprelay provide internal clients with IP's from the ISP. Trouble is, unsolicated inbound ICMPv6 messages from the ISP's gateway are being dropped on the way into outside interface.
%ASA-3-313008: Denied IPv6-ICMP type=129, code=0 from fe80::201:5cff:fe3b:3c41 on interface outside
%ASA-3-313008: Denied IPv6-ICMP type=131, code=0 from fe80::201:5cff:fe3b:3c41 on interface outside
%ASA-3-313008: Denied IPv6-ICMP type=131, code=0 from fe80::201:5cff:fe3b:3c41 on interface outside
[Code]...
I have assigned a task to configure a vpn between windows 2008 server and cisco asa 5505, what kind of vpn should i go with as the windows 2008 server r2 is on cloud and is it possible to configure site-to-site vpn for this network senario or not.. i have try ikev1/ipsec remote access vpn with l2tp with (CHAP, MS-CHAP v2) and couldn't find any document which will allow me to configure windows 2008 server to behave a client and connect it to asa, well what i did is that i configured a dail-up connnect with l2tp and found the following debug message
Sep 09 20:04:02 [IKEv1 DEBUG]IP = 172.16.32.5, Oakley proposal is acceptable
Sep 09 20:04:02 [IKEv1 DEBUG]IP = 172.16.32.5, IKE SA Proposal # 1, Transform # 1 acceptable Matches global IKE entry # 1
[Code].....
I am having issue with network connectivity between remote access (RA) VPN users and remote site VPN hosts.
Topology is:
RA VPN laptop (192.168.200.3 /24) ---- internet ---- Head Office (ASA5505) -- LAN subnet 10.0.0.0 /24
SiteB (10.0.10.0 /24) ---- internet ----- Head Office (ASA5505) ---- LAN subnet 10.0.0.0 /24
From head office there is no issue communicating with RA VPN and siteB hosts but Site B hosts and RA VPN users can not communicate each other totally (ping failed too).
Site B is using Cisco 867 router with IPSEC VPN to the ASA5505 at head office. I have added the ACL on this router to access 192.168.200.x /24 for VPN traffic and exempt from NATing. When I enabled ' drop log' in the class-map in the Zone based firewall config, I could not see any ping packt comes in so I believe the issue is at ASA5505 config.
At ASA5505 I use split VPN tunnel ACL and have included the subnet for 10.0.10.0/24 as well as 192.168.200.0 /24. This split tunnel ACL are applied to both the IPSec VPN tunnel and also the RA VPN group policy. The ASA is using sw version 151-4.M5.
I have a issue that i am at a loss as how to solve it. I have an ASA 5505 as my firewall. I have users from other companies who visit from time to time and are unable to use their outlook email to send messages. They can however receive messages without a problem. I also have a situation where users who use windows live to access gmail are unable to send messages.
I have narrowed it down to the fact that these uses are using ssl/tls to send the mails. I did some research and found out about the inspect esmtp setting in the ASA. I have disabled it and i still have to problem. I have also removed all outbound deny statements and still no luck.
Of note is that i can send emails without attachments. They take a long time to go out ( from minutes to hours) but eventually they do. Emails with attachments of even 10k do not go at all.
I was running image 8.2.3 and i downgraded to 8.0.5...still did not work...i upgraded to 8.4.3...still did not work. I am now back at 8.2.3.
My Firewall config is attached. I am at my wits end as to what else to try. The company has not renewed support for the device so i am on my own here!
I am using two firewalls to connect two different offices. Firewall 5510 is running ASDM 6.3 and 5505 is running ASDM 6.2, Problem is that even after connecting two sites, i am unable to ping remote network from either side. I am mentioned static route as tunneled.
View 1 Replies View RelatedI have the below configuration for a cisco asa 5505. There is a ADSL router in front of the ASA which has a static IP. I set up a remote-access VPN (using the wizard), but I cannot connect to the ASA firewall as the attached VPN client log shows. My only concern is that there might be something missing, ie a static route that goes to the inside interface. [code]
View 7 Replies View Related
