Cisco Firewall :: ASA 5505 With IOS 8.4 / Unable To Ping Or Map Drives To It?
Aug 12, 2012
I configured a new Asa 5505 with Ios 8.44-1-k8.bin and when I installed the Asa the client's after about 1 hour were unable to ping or map drives to the Asa. I got the following error,%ASA-2-106007: Deny inbound UDP from XXXX to XXXX due to DNS Query. I added the command same-security-traffic permit intra-interface they were then able to ping the server and connect to the Internet, but still unable to map drives i could see the connections from the Pc's to the server in a show conn with was tcp port 445 with Saa? I reverted back to Ios 8.25 and everything works.
View 2 Replies
ADVERTISEMENT
Sep 9, 2011
I just tried to configure my ASA but unable to ping. My setup is as follows:
Cable Modem (DHCP from IPS)---> ASA (192.168.1.1)--->Belking Router (192.168.5.1)--->Switch (192.168.5.14)--->
ASA Version 8.2(3)
!
hostname WoodHomeASA-1
[Code].....
View 30 Replies
View Related
Apr 5, 2013
I have setup 5505 ASA for Testing purposes. It has static route to layer 3 switch on outside interface that goes to the internet.
ciscoasa# sh route
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
[Code].....
View 20 Replies
View Related
Aug 18, 2011
I've been called upon to fix the SSL VPN issues in our ASA5505. The issue I am having is that I am able to log into the vpn, access the internet, but I'm unable to access anything on the LAN. I can't use ping or use DNS.
I'm using ASDM v. 6.2(1) and ASA verison 8.2(1). I'm not comfortable using the CLI and prefer the GUI.
View 13 Replies
View Related
Jun 11, 2012
I am able to ping from Switch to firewall inside ip and user desktop ip but unable to ping from user desktop to FW Inside ip.. config is below for both switch and FW Cisco ASA5510....
TechCore-SW#ping 172.22.15.10
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 172.22.15.10, timeout is 2 seconds:
[Code].....
View 7 Replies
View Related
Jan 9, 2013
Internet ISP -> Juniper SRX 210 Ge-0/0/0
Juniper fe0/0/2 -> Cisco ASA 5505
Cisco ASA 5505 - >Inernal LAN switch.
1. Internet is connected to Juniper Ge0/0/0 via /30 IP.
2. Juniper fe0/0/2 port is configured as inet port and configured the Internal public LAN pool provided by the ISP. And this port is directly connected to Cisco ASA 5505 E0/0. Its a /28 pool IP address. This interface is configured as outside and security level set to 0.
From Juniper SRX, am able to ping public Internet IPs (8.8.8.8).
Issue:
1. From ASA am unable to ping public ip configured on Juniper G0/0/0 port.(/30)
2. From ASA no other Public internet IP is pinging.
Troubleshooting Done so far.
1, Configured icmp inspection on ASA.
2. Used the packet tracer in ASA, it shows the packet is flowing outside without a drop.
3. Allowed all services in untrust zone in bound traffic in Juniper SRX.
4. Viewed the logs when I was trying the ping 8.8.8.8 in ASA. It says "Tear down ICMP connection for faddrr **** gaddr **
View 2 Replies
View Related
Apr 18, 2012
We are going to impliment Spectrum (CA) in my network,i have ASA-5580-20 firewall now my spectrum server want to communicate with firewall,then only it will discover the firewall logs.Now the problem is my spectrum server is in MZ zone(10.10.10.45) security leval is 70 and my inside interface(10.20.20.101) security leval is 100.
I am unable to ping from spectrum server to firewall because of high security leval.How can i solve this problem,can i change my inside security leval to 69 then i think it will ping.
View 1 Replies
View Related
May 24, 2012
i am trying to get my ASA 5505 with 2 internal VLANs (voice and data) and external internet VLAN to run in router as a stick, and route between VLANS.
I cant get it working though:
[code]...
View 4 Replies
View Related
Sep 7, 2011
We want to use an ASA as a pure routing device. Our network has several internal subnets (10.1.x.0/24), and we want to be able to reach them from outside and to allow access between them.
We have a defined a VLAN for each subnet range with the same security-level, added it to an Ethernet port and made the Ethernet that acts as outside as a trunk, and defined it as the global routing.
We cannot ping any of the subnet IPs defined in the ASA from outside nor we can ping it from the internal IP addresses.
Configuration:
: Saved
:
ASA Version 8.2(1)
[Code].....
View 3 Replies
View Related
Jun 17, 2012
I am trying to configure Nat on a clean ASA 5505, but can't get it to work. I ran the commands below. On the ASA I can ping the internet and inside vlan ip. On my laptop I can ping the ASA inside vlan ip, but I can't ping the outside vlan ip. From another network I can ping the ASA outside public ip. Is there an access-list that denies inside from accessing outside?
I am running version 8.4(3) and I erased the existing configuration.
ASA(config)# interface vlan 1
ASA(config-if)# ip address 10.0.0.1 255.255.255.0
ASA(config-if)# nameif inside
[Code].....
View 8 Replies
View Related
Sep 29, 2012
I have 2 ASA and would like to build a Side-to-Side VPN between these ASA. So I can learn something about configure a ASA for different thinks. But now I don`t can Ping from a Client to the Internet-Router.My Configuration is:
Client IP 192.168.1.100 <===> ASA Inside 192.168.1.1 /Outside 192.168.178.254 <===> Router 192.168.178.1
Is there something wrong at my config? or do I need inside private Adresses and at the Outside Global IP`s.
At the Router I have a Static Route that the 192.168.1.0 / 24 ist to find over Gateway 192.168.178.254
View 2 Replies
View Related
Aug 4, 2012
I have been tasked with replacing our company eSoft router with a Cisco ASA 5505 with the upgraded security license. I have been working on the configuration for a couple of weeks now, after reading hundreds of forum posts, watching youtube videos, and endless google searching, and despite my best efforts I am still having an issue I can’t figure out.
I have a couple of subnets, that when the ASA is connected, I cannot ping, nor can they get to the internet or our Exchange server. At this point I’m not sure if it’s an access rule issue, NAT issue, or DNS issue.
Here is the network layout:
ASA: 192.168.0.2 (Primary Gateway)
192.168.0.0 (Primary facility, ASA is the gateway)
192.168.2.0 (Second facility, connected via Verizon point-to-point)
192.168.3.0 (Third facility, connected via Verizon point-to-point)
[Code].....
View 7 Replies
View Related
Mar 19, 2013
I am trying to troubleshoot an ASA5505 connectivity issue. My initial tests are to ping the Internet router from the ASA This is failing and also a sh arp only shows internal addresses.
I have to go to site to check this out to confirm the following.
1: Should I be able to ping the Internet router from the ASA?
2: Do I need to permit any icmp to do this?
3: Should a sh arp show the address of the internet router?
I tried entering the command permit icmp any outside
However I got the error route already exists 0.0.0.0/0.0.0.0
View 2 Replies
View Related
Nov 14, 2011
I have a Cisco ASA 5505, the problem is I am not able to ping to outside natted interface (ip: 172.88.188.123 and 124 and 125) from inside network I have looked for ASA documentation through the internet and still got nothing.
the config are:
: Saved
:
ASA Version 8.2(1)
!
[Code].....
View 2 Replies
View Related
Mar 17, 2012
Cisco ASA5505..Made a VPN connection (SSL or ANYconnect) with a domain notebook. After that via RDP (connect with domain user) to one of the PC's in the domain. Until now everything is ok.The mapped drives are there but I do not have access to them. Normaly when I logged in into the network no problem but only with VPN connection.I have to login to get access but when I do that get message unknown user.
View 1 Replies
View Related
May 10, 2011
I have a new ASA 5505 and all is working fine, I can CLI and ASDM into it, but just can't ping the inside interface, do I need to enable a feature to make this work somehow?
View 1 Replies
View Related
Nov 4, 2011
I've configured a 5505 but internal clients can't ping external ip. To test I've connect a pc with the ip of the default router on the Outside int the ASA can ping the PC and the PC can ping the ASA, but internal clients can't ping the PC
PC config 195.12.23.241/28
Here's the ASA config, so far I've wiped the ASA and started with a blank sonfig and built it up but still not working.
ASA Version 8.2(5)
!
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
[Code] .....
View 2 Replies
View Related
Dec 12, 2011
I have an ASA 5505 that I'm trying to set up a guest network on. I've configured an interface as a trunk and allowed the 2 vlans but I'm not getting any layer 3 to it. The switch connected to it is a 3560 and port is configured as a trunk with the same vlans.
I can't ping the ASA inside interface but I see its MAC address in the swtich's table.
[code]....
View 4 Replies
View Related
Jul 30, 2011
I have a ASA 5505. I want to be able to ping from my workstation to some address, lets say [URL]. My workstation is connected to Ethernet 0/2. I have tried playing around with the ACL but am not able to accomplish this.
Result of the command: "show running-config"
: Saved:ASA Version 8.2(1) !hostname ciscoasadomain-name home.7vnmotorsports.com
[Code]....
View 5 Replies
View Related
Sep 19, 2012
Before upgrading to 8.4(4)1 I was able to ping our inside interface accross the VPN. Now I cannot. Because ping is not working, my SNMP server thinks that the device is offline however I know the VPN tunnel is still up and the remote branch office is working fine. Here is the config of the branch office ASA 5505 in question. How to get icmp working again?
ASA Version 8.4(4)1
!
hostname BranchASA5505
domain-name houston.deh
[Code].....
View 2 Replies
View Related
Jan 15, 2012
Cisco ASA 5505 Cannot Ping Secondary Internal Network.
View 9 Replies
View Related
Jul 24, 2012
I have, what I believe to be, a simple issue - I must be missing something. Site to Site VPN with Cisco ASA's. VPN is up, and remote hosts can ping the inside int of ASA (10.51.253.209). There is a PC (10.51.253.210) plugged into e0/1.
I know the PC is configured correctly with Windows firewall tuned off. The PC cannot get to the ouside world, and the ASA cannot ping 10.51.253.210.
I have seen this before, and I deleted VLAN 1, recreated it, and I could ping the local host without issue. Basically, the VPN is up and running but PC 10.51.253.210 cannot get out
ASA Version 7.2(4)
!
hostname *****
domain-name *****
enable password N7FecZuSHJlVZC2P encrypted
[Code]...
View 2 Replies
View Related
Mar 29, 2012
I have the following setup.
host PC (192.168.9.3) -----> gateway (192.168.9.2) ----- Pix E1 (192.168.9.1)/Pix E0 (81.x.x.250) ------ Internet
The 192.168.9.2 gateway is a 3560 switch connected to the PIX. I can ping out to the Internet via IP from the PIX, but not via the host PC (192.168.9.3) on the LAN. PIX and gateway configs below. Am I missing something that's preventing me pinging out to the Internet from the internal LAN?
PIX config
test-cal-pix01# sh run
: Saved
:
PIX Version 8.0(3)
!
hostname test-cal-pix01
enable password btf1YD.Vq7mE6vEA encrypted
[code]....
View 1 Replies
View Related
Jul 26, 2011
I am having a problem configuring my ASA 5505 for NAT.
View 3 Replies
View Related
Dec 1, 2012
I' d like to have some support for a very-basic PIX firewall configuration. I 'm dealing with PIX 515E. Inside hosts can ping inside interface , outside hosts outside interface and so on. Simply i cannot ping outside interface from inside hosts, Inside host-192.168.1.0
Outside - any host like google.com, or to check my isp link's dns ip. I have attached the pix configuration text file to test.
View 10 Replies
View Related
Apr 25, 2011
I have several drives that are accessed through a LAN but as soon as I connet to another drive through VPN all the drives get disconnected. According to the IT people this is a feature of VPN for security reasons and there is no way to access those drives.Anyone knows if there is a way to connect to the VPN drive and the local LAN drives without getting the LAN drives disconnected?
View 8 Replies
View Related
May 24, 2012
I hav a Network area storage server where all my files are stored. The Folders are shared on the network the shared folders were working fine but suddenly i was unable to access these folders .I tried to Map the network drives by IP address that is ""\ipaddressshare""of the NAS server but was unable to do so. It Gave me an error message ""No Logon Servers are currently available"" . But when i put my server Name that is ""\servernameshare "" i am able to map the folders. Why am i unable to access my shared folders on the NAS server by IP address . I have checked the IP adress connectivity and everything but it is all fine .I can even ping by ip address of the NAS serve
View 5 Replies
View Related
Mar 16, 2011
I am trying to fix my sisters laptop before she goes back to college. The computer is suddenly unable to connect to the internet via wireless, but can connect perfectly fine with a cord. Also whenever I restart it says unable to reconnect all network drives.The computer is a Dell Latitude D630 Laptop running windows vista ultimate 32 bit, the network card is a Dell Wireless 1395 wlan mini-card.I took it over to some other places to see if it was just my router, which is a linksys e3000 and to no avail it still could not connect. I tried doing some system restores and that did not work either.
View 2 Replies
View Related
Mar 31, 2011
We have two ASA5510s, each with outside interfaces to the same two ISPs (different IP addresses within the same subnet, of course). Both ASAs allow ICMP on all (inside and outside) interfaces. One ASA's default route is to ISP-1 and the other is to ISP-2. We can ping the default gateways for both ISPs from only one ASA. From the other ASA, we can only ping the default gateway for the default route but not the other. The pings originate from an inside client, first configured with the default gateway for ASA-1, then for ASA-2. Why does this happen, how do I troubleshoot something like this and how do I fix it?
View 1 Replies
View Related
Nov 27, 2012
One of my client has BSNL leased line with LAN IP POOL we configured those on ASA 5510 nad Internet working fine but from cloud we are not getting any response for ping requiest please find running configuration below:
ciscoasa(config)# sh run
: Saved
:
ASA Version 8.2(1)
[Code]....
View 4 Replies
View Related
May 3, 2012
one of my SNMP server 10.242.103.42 sits in MZ zone,and ACE 4710 is connected to core switch,coreswitch is connected to firewall asa.
Now iam trying to ping from MZ zone SNMP server to loadbalancer ip 10.242.105.1,iam unable to ping my LB interface to discover SLB on my SNMP server.
View 1 Replies
View Related
Mar 8, 2013
I have two USB drives connected to my EA6500. When I use the ip to connect to them everything works just fine, but I cant map the drives. If I access map drives, I cant do anything with the files. It looses connection all the time.
View 2 Replies
View Related
Jul 26, 2011
I am unable to ping inside interface (Rin) to outside interface (Rout) of my Cisco ASA 5520 runing on ASA Version 8.4(1).
ASA Version 8.4(1)
!
hostname FW5520
[Code].....
View 10 Replies
View Related
