Cisco Firewall :: ASA 5505 Unable To Get To Internet
Dec 27, 2011First time attempting to set up a 5505. Trying to replace a snapgear firewall and replicate the settings to the 5505.
View 12 Replies
ADVERTISEMENT
Cisco Firewall :: ASA 5505 / Unable To Use Internet?
Dec 11, 2012I am using ASA 5505.Below are my sh run.I am not able to ping my gatway i.e 182.73.131.89
interface Ethernet0/0
description Internet Interface
switchport access vlan 61
!
interface Ethernet0/1
description office Internet
switchport access vlan 50
[code]....
Cisco Firewall :: Unable To Access Internet With ASA 5505
Sep 27, 2012I have config ASA 5505 and it is conencted to layer 3 switch that connects to cable Modem.
ASA is config with DHCP option and PC is able to get the IP from ASA. But from PC i am unable to access the internet. From ASA itself i am able to ping the Websites fine.
ASA has config with DHCP for inside and also it is doing NAT.
When i connect the ASA directly to Cable modem then pc is able to access the internet.
Cisco Firewall :: 5505 - ASA Unable To Ping Internet From DMZ
Apr 5, 2013I have setup 5505 ASA for Testing purposes. It has static route to layer 3 switch on outside interface that goes to the internet.
ciscoasa# sh route
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
[Code].....
Cisco Firewall :: ASA 5505 / Unable To Get Internet When Using DHCP?
Jun 28, 2011I found a tricky task for our ASA 5505 firewall. I am not able to go internet when using DHCP but I can access by using fixed IP address in client PC.Same IP, Same Mask, Same DNS, Same Gateway. All the same but no hope. Any configuration i missed in firewall?
View 5 Replies View RelatedCisco Firewall :: ASA 5505 - Unable To Connect To The Internet
Mar 8, 2011I'm unable to have any internet connection for my new setup.
here's the overview.
Current setup is
Internet -> Router -> PIX 501 -> Switch -> clients
Internet -> static ip given is 210.193.34.1 - 210.193.34.6
Router -> Static ip assigned for NAT/External is 210.193.34.1, Local ip is 192.168.1.246
PIX 501 setting ->
IP to Router, According to router screen is 210.193.34.2, but not sure what settings are done in the PIX itself as I'm unable to access it.
local ip is 192.168.1.1
Clients - > 192.168.1.0
Old setup is working fine and connected to internet. for the new setup, as i do not want any downtime for the old setup.
As you can see, there are two firewalls connected concurrently to the router. I've configured it this way.
Internet -> Router -> ASA 5505 -> Switch -> clients
ASA 5505 setting ->
IP to Router NAT/External/ Outside Interface, 210.193.34.6 (Or do i set as 192.168.1.0?),
local ip/ Inside Interface is 192.168.2.1
Clients - > 192.168.2.0
some setup details.
security policy, NAT, set to default. routing is route outside 0.0.0.0 0.0.0.0 210193.34.6
I'm unable to access after a week of troubleshooting.
Cisco Firewall :: ASA 5505 Unable To Ping
Sep 9, 2011I just tried to configure my ASA but unable to ping. My setup is as follows:
Cable Modem (DHCP from IPS)---> ASA (192.168.1.1)--->Belking Router (192.168.5.1)--->Switch (192.168.5.14)--->
ASA Version 8.2(3)
!
hostname WoodHomeASA-1
[Code].....
Cisco Firewall :: ASA 5505 Unable To See Matching ID Of 0
Sep 20, 2011I have a command line from ASA 5505 like below :
nat (inside) 0 access-list NO_NAT
The problem is I cannot see any matching ID of 0 at the (outside) like :
nat (outside) 0 xxxxxxxxxxxxx
Another problem is there is also no any access list with the name of NO_NAT.
Cisco Firewall :: Unable To Save Config In ASA 5505?
Sep 26, 2012I have ASA 5505 and I save the configuration in the ASA 5505 using write memory or using copy run start but whe i unplug the power cord and plug it back in the ASA gets its factory default configuration.
View 8 Replies View RelatedCisco Firewall :: 5505 VPN Client Unable To Connect
Feb 13, 2012We have a cisco asa 5505 on which we have setup a group VPN. The VPN connections from all cisco vpn clients works fine except one. The keep getting the below error
"Secure VPN Connection terminated locally by the client. Reason 412: The remote peer is no longer responding. Connection Terminated".
Not sure why only one client won't be able to connect. The version we are using is 5.0.02 for VPN client.
Cisco Firewall :: Unable To Telnet / SSH / RDP From Inside DMZ / ASA 5505
Oct 31, 2011I am unable to Telnet/SSH/RDP from my inside network to my DMZ. I am not sure where the problem lies, I am able to use VNC from the inside to the DMZ (ports 5800, 5900), and also establish connection on Ports (26700-26899). I have a computer connected directly to the DMZ and those services work to all networks on the DMZ.I have attached Logs of successful VNC connections, unsuccessful RDP and Telnet sessions, and the running config.
View 23 Replies View RelatedCisco Firewall :: ASA 5505 With IOS 8.4 / Unable To Ping Or Map Drives To It?
Aug 12, 2012I configured a new Asa 5505 with Ios 8.44-1-k8.bin and when I installed the Asa the client's after about 1 hour were unable to ping or map drives to the Asa. I got the following error,%ASA-2-106007: Deny inbound UDP from XXXX to XXXX due to DNS Query. I added the command same-security-traffic permit intra-interface they were then able to ping the server and connect to the Internet, but still unable to map drives i could see the connections from the Pc's to the server in a show conn with was tcp port 445 with Saa? I reverted back to Ios 8.25 and everything works.
View 2 Replies View RelatedCisco Firewall :: ASA 5505 / Unable To Use Full Bandwidth?
May 23, 2011When I have a computer directly connected to the Cable Modem I get 9.84MB Down and 1MB Up. When I put it behind the ASA 5505 with policing on the interface, I only get 4MB Down and 660Kb Down.What I'm wanting to do is setup this up to enable my VoIP to have a higher priority and shave 128kon both the Up/Down for the VoIP traffic. I also want to make sure I don't exceed the inbound and outbound thresholds.I''m using a 5505 Security Plus?
View 3 Replies View RelatedCisco Firewall :: Unable To Send Mails From ASA 5505
Mar 26, 2012I have 2 subnets bought from my provider 194.102.98.128/27 and 194.102.98.160/27.
From my provider a have the following setup:
IP Address: 86.120.151.66
Netmask: 255.255.255.128
Gateway: 86.120.151.1
DNS (1): 213.154.124.1
DNS (2): 193.231.252.1
My IPs are static routed by my provider thought 86.120.151.66 .
On the firewall I have the following set-up:
Outside Interface: 86.120.151.66/25 security level 0
DMZ interface: 194.102.98.129/27 security level 50
Inside Interface: 194.102.98.161/27 security level 100
0.0.0.0 0.0.0.0 [1/0] via 86.120.151.1, outside
Everything works perfectly except when I try to sent an email. The email gets sent (eventually), but afert a long waiting time, 45-60 sec. The connection is opened instally to the server but then just hangs there for 40-50 sec. The problem is that a have an aplication on a server that has to send confirmation emails, and that aplication is limited to a 30 sec timeout for conecting to the mail server, much less then the 45-60 sec that I have now. The mail server is hosted by a data center, it is not in my networks (location).
I have tried deleting the ESMTP inspection, that doesn't work. Pinging my mail server rezults in a average time of 20 ms. And when a do a tracert the hight value in a hop doesn't usually pass 80 ms, the average is 20-25 ms.
The problem is ONLY when sending emails. Everything else works perfect, including receiving emails from the same server.
My running config is:
hostname ASA-Adisys
domain-name Intern.ro
enable password 0./39zRW9yhKK/bO encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
Cisco Firewall :: Unable To Launch ASDM Over WAN - ASA 5505
Jan 9, 2013Remote LAN pool is configured as inside. Route is proper. I am able to open 443 port from the remote LAN pool on the ASA. That means, the port is open from the remote pool. No response if I try https on the browser.
View 11 Replies View RelatedCisco Firewall :: ASA 5505 - Unable To Assign IP To DMZ Vlan Interface
Oct 26, 2012I have ASA 5505 with base license. I created 3rd vlan on it.it was created. but i am unable to assign IP to it. i assign ip address it takes it. But when i do sh int ip brief it does not show any ip.
Code...
Cisco Firewall :: Unable To Use Public Server Function ASA 5505 9.1
May 23, 2013i can't get it working to expose on internal server to an outside interface.I used the public server function in ASDM.Internet access works if i nat my private adress to one of the available ipadresses provided by our isp.
Internal Server : owncloud 172.10.0.4
External Server : ext181 46.245.171.181
I can't see the error in the configuration,
: Saved
:
ASA Version 9.1(1)
!
hostname rhedetest
domain-name xxxxx.de
enable password 59t92OvRofWL9yf3 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
[code]....
Cisco Firewall :: Unable To Allow Inbound ICMPv6 On ASA 5505 Version 9.1
Nov 22, 2012I have upgraded an ASA 5505 to 9.0(1) as I would like to use ipv6 version of dhcprelay. That said, I am unable to obtain a global unicast address but the link-local address is able to communication with the ISP's gateway/DHCP provider which I hope will allow v6 dhcprelay provide internal clients with IP's from the ISP. Trouble is, unsolicated inbound ICMPv6 messages from the ISP's gateway are being dropped on the way into outside interface.
%ASA-3-313008: Denied IPv6-ICMP type=129, code=0 from fe80::201:5cff:fe3b:3c41 on interface outside
%ASA-3-313008: Denied IPv6-ICMP type=131, code=0 from fe80::201:5cff:fe3b:3c41 on interface outside
%ASA-3-313008: Denied IPv6-ICMP type=131, code=0 from fe80::201:5cff:fe3b:3c41 on interface outside
[Code]...
Cisco WAN :: ASA 5505 Unable To Access Internet
Mar 19, 2013I have an ASA 5505 which is unable to acces the internet, even when reloading just the basic config.If i setup my laptop with the outside ip or another ip in the subnet, it does work.
[code]....
Cisco Firewall :: Unable To Setup VPN Between Windows 2008 Server R2 And ASA 5505?
Sep 9, 2012I have assigned a task to configure a vpn between windows 2008 server and cisco asa 5505, what kind of vpn should i go with as the windows 2008 server r2 is on cloud and is it possible to configure site-to-site vpn for this network senario or not.. i have try ikev1/ipsec remote access vpn with l2tp with (CHAP, MS-CHAP v2) and couldn't find any document which will allow me to configure windows 2008 server to behave a client and connect it to asa, well what i did is that i configured a dail-up connnect with l2tp and found the following debug message
Sep 09 20:04:02 [IKEv1 DEBUG]IP = 172.16.32.5, Oakley proposal is acceptable
Sep 09 20:04:02 [IKEv1 DEBUG]IP = 172.16.32.5, IKE SA Proposal # 1, Transform # 1 acceptable Matches global IKE entry # 1
[Code].....
Cisco Firewall :: 5505 - Users Unable To Access External Email Servers ASA?
Nov 28, 2011I have a issue that i am at a loss as how to solve it. I have an ASA 5505 as my firewall. I have users from other companies who visit from time to time and are unable to use their outlook email to send messages. They can however receive messages without a problem. I also have a situation where users who use windows live to access gmail are unable to send messages.
I have narrowed it down to the fact that these uses are using ssl/tls to send the mails. I did some research and found out about the inspect esmtp setting in the ASA. I have disabled it and i still have to problem. I have also removed all outbound deny statements and still no luck.
Of note is that i can send emails without attachments. They take a long time to go out ( from minutes to hours) but eventually they do. Emails with attachments of even 10k do not go at all.
I was running image 8.2.3 and i downgraded to 8.0.5...still did not work...i upgraded to 8.4.3...still did not work. I am now back at 8.2.3.
My Firewall config is attached. I am at my wits end as to what else to try. The company has not renewed support for the device so i am on my own here!
Cisco Firewall :: Unable To Access Remote Network After Connecting ASA 5510 And 5505
Sep 24, 2011I am using two firewalls to connect two different offices. Firewall 5510 is running ASDM 6.3 and 5505 is running ASDM 6.2, Problem is that even after connecting two sites, i am unable to ping remote network from either side. I am mentioned static route as tunneled.
View 1 Replies View RelatedCisco VPN :: Unable To Access Internet Using VRF-lite On Through ASA 5505
May 4, 2012I am trying to “build up” a small home-network and using some of following Cisco equipment’s
ASA 5505 v8.4.3 witch base licenseCisco Catalyst 3750G with ipservices version 15.0.xand 1 qty of AP1142N I am not able to get internet access from any VRF’s.
From "MILAN (LAN) VRF, I am able to ping my gw: 10.45.45.1 but I am not able to ping for example: “linknett VRF”.
It seems that i am missing some NAT rules on ASA or ?
If i connect my laptop directly to the ASA, i am able to get internet access!
I am not feeling comfortable with a new ASA 8.4 code yet, so im not so sure which exact code's i am missing on ASA ...
attached digram including configuration files from ASA and 3750 sw.
Cisco Firewall :: Setting Up ASA 5505 To Be Used As Firewall Between BT Internet And 3560 LAN Switch?
Aug 23, 2011setting up an ASA 5505 to be used as a firewall between a BT internet router(BTNet service) and a Cisco 3560 Lan switch. BT have presented me with a cisco 3800 series router with the following details:
Network Address Network Mask BTnet NTE Router LAN Address
There are 2 Gigethernet ports on the back of the router port Ge0/0 is connected to the BT NTE and the status light is flashing green. Int ge0/1 is connected into port int e0/1 of the ASA but i am unable to get any connection.
Cisco Firewall :: ASA 5510 - Users Unable To Access Internet Through Firewall
Feb 26, 2013I have some problem with the ASA 5510 ver 7.0(6). My manager wants to keep this as backup. tried lots of things but still users not able to access internet nor can i ping anywhere.For example when i ping 4.2.2.2 i dont get any reply.The runing config is below for ur ref :
HQ-ASA-01# show running-config
: Saved
:
[Code]......
Cisco Firewall :: Users Behind ASA5505 Firewall Are Unable To Access Internet
Feb 24, 2011I have a normal setup of ASA5505 (without security license) connected behind an internet router. From the ASA5505 console I can ping the Internet. However, users behind the Firewall on the internal LAN, cannot ping the Internet even though NATing is configured. The users can ping the Inside interface of the Firewall so there is no internal reachability problem. In addition, I noticed that the NAT inside access list is not having any hit counts at all when users are trying to reach the internet.
When i replace the ASA5505 with a router with NAT overload configuration on it, the setup works normally and users are able to browse the internet.
The ASA5505 configuration is shown below.
hostname Firewall
interface Ethernet0/0
description Connected To Internet Router
switchport access vlan 10
[Code].....
Cisco Firewall :: Unable To Ping Internet IPs From ASA5505 Firewall
Jan 9, 2013Internet ISP -> Juniper SRX 210 Ge-0/0/0
Juniper fe0/0/2 -> Cisco ASA 5505
Cisco ASA 5505 - >Inernal LAN switch.
1. Internet is connected to Juniper Ge0/0/0 via /30 IP.
2. Juniper fe0/0/2 port is configured as inet port and configured the Internal public LAN pool provided by the ISP. And this port is directly connected to Cisco ASA 5505 E0/0. Its a /28 pool IP address. This interface is configured as outside and security level set to 0.
From Juniper SRX, am able to ping public Internet IPs (8.8.8.8).
Issue:
1. From ASA am unable to ping public ip configured on Juniper G0/0/0 port.(/30)
2. From ASA no other Public internet IP is pinging.
Troubleshooting Done so far.
1, Configured icmp inspection on ASA.
2. Used the packet tracer in ASA, it shows the packet is flowing outside without a drop.
3. Allowed all services in untrust zone in bound traffic in Juniper SRX.
4. Viewed the logs when I was trying the ping 8.8.8.8 in ASA. It says "Tear down ICMP connection for faddrr **** gaddr **
Cisco Firewall :: ASA 5505 - Unable To Access Certain Ports Over Site To Site VPN
Jan 16, 2013We have a client that has a Cisco 1801W Firewall that is setup as a site to site VPN terminating to a Cisco ASA 5505. The tunnel is up and established, I can ping from both sides of the tunnel.
The problem is the clients behind the Cisco ASA (192.168.2.x) cannot reach certain ports behind the Router (192.168.1.x). The main thing we're trying to do is browse via UNC path (ex: \192.168.1.120 from a 192.168.2.x machine).
I got 3389 working after I changed the - ip nat inside source static tcp 192.168.1.120 3389 y.y.x.x 3389 route-map DM_RMAP_1 extendable Modified the command to include the public IP instead of interface FastEthernet0
I believe it has something to do with the way NAT and route-maps are setup currently but I'm not familar enough with them to make the changes. I worked with Cisco to ensure the VPN tunnel was fine and it's something security related on the Router.
Here is the configuration (removed a few lines not necessary. y.y.x.x = WAN IP of Router x.x.y.y = WAN IP of ASA).
Building configuration...
Current configuration : 23648 bytes
!
version 12.4
no service pad
[Code].....
Cisco Firewall :: ASA 5505 - No Internet From DMZ
Apr 1, 2013I am trying to configure DMZ on ASA 5505, basic license. After changes I have made I cannot access Internet from DMZ. I think I am missing an access list for DMZ, but I am not sure.
interface Ethernet0/0switchport access vlan 2!interface Ethernet0/1 !interface Ethernet0/2!interface Ethernet0/3!interface Ethernet0/4!interface Ethernet0/5switchport access vlan 3!interface Ethernet0/6!interface
[Code].....
Cisco Firewall :: Getting ASA 5505 Internet Connectivity?
Jun 2, 2011I have basically started fresh, from a clean image. We bought these with the expectation that we would be able to configure them using the GUI for what we need, which up till this point doesn’t seem to be the case.I will tell you how I have this setup, I have our ADSL going to a modem acting as a bridge with a static IP supplied by the ISP. If i connect a laptop to that modem and set the static ip on the laptop, I get internet access fine.So I then connect the modem to ethernet0/0 and the laptop to ethernet 0/1 I connect to the ASDM and run the startup wizard with the following:
· Outside ip : 87.87.87.87 255.255.252.0 (this works on the lappy straight to the modem)
· Inside ip : 192.168.10.1 255.255.255.0
· No dmz
[code]......
Cisco Firewall :: ASA 5505 Not Reconnecting To Internet
Sep 6, 2011I have a 5505 ver 8.2 connected to a router with a T1 internet connection. There was a problem with the internet service and when it was resolved the ASA did not pass traffic to the internet until it was power-cycled. Unfortunately that's all the info I have, as I was not onsite and couldn't access the ASA.
View 3 Replies View RelatedCisco Firewall :: Pass Internet With ASA 5505?
Apr 1, 2013I have not been having much success configuring my 5505 for Internet access, and I'm sure there are a few small things I'm missing. At times I believe I got it to the point where I could ping, but still not pass through the Internet traffic. At this point, I reset the 5505 and only changed a couple of settings. I have an external range with these characteristics: Network Address 67.139.113.16 (.17 is Gateway), SM: 255.255.255.248, available IP: 67.139.113.218 The external connection is through a T1 modem, and when I put those settings in my laptop, I can access just fine. When I went through the startup wizard in the ADSM, I maded the internal interface 10.209.0.3, subnet mask: 255.255.255.0 I selected PAT in the Wizard, but don't know if I should have, or if the NAT rules I tried to put in are fine. Eventually I want to add a Site to Site VPN to the rest of the 10.0.0.0 network, but I can't even pass the Internet through to the inside. Also, this will eventually be behind another hosted firewall, so I'm not worried about restricting access, even currently. However, I suspect the problem is that traffic is being blocked with the NAT rules or Access rules.I wish I could just disable those inherent deny rules Outside of pings to 10.209.0.3, all pings come back as request timed out.
Config:
: Saved
:
ASA Version 8.2(5)
!
[Code].....
Cisco Firewall :: ASA 5505 - Nat Can't Ping Internet
Jun 17, 2012I am trying to configure Nat on a clean ASA 5505, but can't get it to work. I ran the commands below. On the ASA I can ping the internet and inside vlan ip. On my laptop I can ping the ASA inside vlan ip, but I can't ping the outside vlan ip. From another network I can ping the ASA outside public ip. Is there an access-list that denies inside from accessing outside?
I am running version 8.4(3) and I erased the existing configuration.
ASA(config)# interface vlan 1
ASA(config-if)# ip address 10.0.0.1 255.255.255.0
ASA(config-if)# nameif inside
[Code].....