Setting A Dynamic IP Address?
Mar 9, 2013
I'm trying to set my PC to have a Static IP but I'm having no luck. I've got it working before and was able to forward ports, but that was with my old PC.My problem is when I go into my wireless properties and change the TCP/IP settings from find automatically to custom settings, it says I need to reboot my PC. I do that but no matter what I do the settings are back to default, automatic settings when I reboot.The only difference between this new PC and the old one is that this one is using an SSD for my OS and a normal HDD for my Data.
View 14 Replies
ADVERTISEMENT
Oct 16, 2012
how to set-up cisco site to site vpn having dynamic ip address on both sides??
View 2 Replies
View Related
Jan 19, 2011
I have a PC that I would like to access remotely though VPN. My internet service provider is Time Warner Cable and it provides me with a dynamic Ip address.
View 5 Replies
View Related
May 3, 2011
I am wondering if there is any way to get the name and last name of the person that has the internet connection corresponding to a particular dynamic IP address that I know, that was used to send an email at a particular date and time that I also know.
View 5 Replies
View Related
Oct 23, 2012
How to change my dynamic ip address in windows 7
View 2 Replies
View Related
Apr 12, 2011
how can I track a dynamic IP address. The reason why I am asking is because my dad lives about 40miles from me and I would like to logon to his computer from my apt and my dad is currently using frontier dsl connection with a westell 6100 modem. Is there any software or what do I need to do to configure this?
View 6 Replies
View Related
Mar 23, 2012
Do not have internet connectivity, despite all the lights lit on calbe modem and the ASUS WL520GU router and only the internet and ethernet lights are lit on the Linksys 2102.Despite numerous reboots, no change and even bypassing the router and connecting directly to ATA still no conectivity.When I open a browser, it reverts to the Asus error page, "reason for failed connection: You have set the wrong dynamic or static IP address, though nothing was changed.Funny thing again, a direct internet connection to the ATA did nothing.A google search only just shows lots of unasnered posts on this issue, or only the usual 'please reboot'.
View 9 Replies
View Related
Jun 29, 2012
do internet cafes use static ip or dynamic ip address. Also what would be the benefit if they used a static ip address.
View 1 Replies
View Related
Aug 3, 2011
I'm having some trouble configuring 2 cisco routers (877) with ipsec vpn tunnel.The 2 of them are linked to the internet with dynamic adsl's - their ip-addresses changes all the time.when the configuration is based on ip addresses it's working ok, but when I'm trying to use host name with the DDNS feature, it's not coming up, I get a lot of errors...
I've searched google and various posts regarding that issue.It's seems like it's possible to do a dynamic-ip to dynamic-ip ipsec tunnel, but I found zero manuals and configuration.I've added the template that I'm using to configure the tunnel with ip addresses.
View 2 Replies
View Related
Mar 6, 2011
connecting a VPN with a dynamic IP address (its a Draytek 2700)We have a customer who has a PIX515E on the central site .Than there are more 2 sites where he installed 2 Draytek 2700 ,and contracted 2 fixes IP addresses for them.These are working fine and always did.In another site they are doing building renewals ,só they will not have ADSL for about 2 month,and they connected a 3G Internet access wich is connected to a Draytek 2710 ,internet wich is working fine,but doesnt have a fixed ip address.
I had search a lot in Cisco support pages,but i can´t find this solution,cause the examples are only to 1 dynamic peer ,not mixed(multiple fixed ip addresses + 1 or more dynamic)The PIX also needs to receive VPN connections from remote users who connect via Cisco VPN client(is working fine too) [code] I know now that when a communication starts from that dynamic peer to the PIX ,PIX doesnt know in wich group he should assign it.So the communication stops.i tried to create a group-policy...but i dont know how to associate it with the tunnel group.I also know that we can just associate 1 crypto map to each interface.
View 2 Replies
View Related
Dec 19, 2011
I have a high speed wireless DSL router from my ISP (Telus). I use one port off the router to connect directly to my desktop computer. Another port is connected to a switch to which ethernet cables to three other rooms are connected. My problem is that when I connect my Bell PVR (9242) to the 'switched' ethernet cable, I'm apparently not able to get a dynamic ip address, which the Bell unit requires, and can't connect to the network.can I connect another router, in place of the switch, to deliver dynamic IP addresses to whatever I connect to the ports in the other rooms in my house?
View 2 Replies
View Related
Nov 13, 2011
i have internet connection which is connect using dynamic ip address but if i add ip address in Local Area Connection i get two networks, one is internet dynamic ip & other one is ip which i setup in Local area connection. so if i select LAN network for lan clients i can access lan. but now i have DLINK DIR 615 router so what should be my settings?
View 3 Replies
View Related
Jul 29, 2012
I think I'm missing a basic step here. In setting up a RV220W device behind either a cable modem or a DSL modem, the address that is being returned is not the public IP address of the modem, but rather the private IP address assigned by the modem to the RV220W. Doesn't matter for normal web access but trying to set up a VPN tunnel fails due to the inaccurate IP address.
If I do the same thing but use the dyndns.com application on a computer behind all of this (connected on the private LAN of the RV220W via cable), it reports the external IP address correctly. That works in some locations if I have an always on computer to load the application to. In some cases, however, there isn't such a computer to leave dedicated to running the separate program.
Since this works, and the RV220W doesn't, there is some difference between the Cisco implementation and the dyndns.com implementation.
So, is there a way to get the RV220W to return the true external IP address, or is it stuck returning a private address?
View 6 Replies
View Related
Jan 23, 2012
I am working with MS Windows 2008 R2 and a Belkin F5D8635-4v1 router.
I have already set up a dynamic IP address which points to my router at home. In my home network I have multiple PC's that I would like to access from the internet. I would like to achieve this without needing to change my port forwarding rules on my router each time...
My thoughts are that I use a single dynamic IP address pointed to my router. My router then forwards to a server with some sort of software that can then forward to the correct PC based on the host name.
So I have 3 domains set up all pointing to the router's IP address:
dest1.domain.com -> 41.xxx.xxx.45
dest2.domain.com -> 41.xxx.xxx.45
dest3.domain.com -> 41.xxx.xxx.45
The router is not smart enough to redirect by host name, so it will just forward everything to 10.0.0.20 The server based at 10.0.0.20 must then have software to now redetermine the target based on the host name. The rules would be set up as follows:
dest1.domain.com -> 10.0.0.22
dest2.domain.com -> 10.0.0.24
dest3.domain.com -> 10.0.0.26
View 1 Replies
View Related
Feb 6, 2012
I have a WRT300n router and want to connect to my Uverse Gateway. When I connect them & try to use the internet connection I get an error that says a connected router must be capable of using DYnamic IP addresses.
View 1 Replies
View Related
Apr 2, 2011
In my home, I have broadband internet connection, which is Time Warner Cable. I also have an Apple Airport Extreme that shares my internet throughout all of my computers. My current set up runs perfectly but the problem is, I have other devices in my home that require a WEP security key. My Airport Extreme is running on WPA but I don't want to lower it's security to WEP just for those devices. What I'm trying to do is create another separate network which has a WEP security key (Linksys WRT54G). So ultimately, I would like to set up two networks, one is the Airport Extreme and the other Linksys, which both run under the same WAN address provided by Time Warner Cable.
View 11 Replies
View Related
Jun 4, 2013
can we configure ip address air lap 1262N-A-K9 via CLI?
View 6 Replies
View Related
Aug 27, 2012
I have bought EA4500 router recently in preparations for the Singapore fibre broadband upgrade.
But for the time being I'm using it to connect to my current Linksys WAG200G ADSL Wireless Gateway.
Here's the issue I'm currently facing. I have set my EA4500 router default IP address to 192.168.1.10 to aviod conflicts with my gateway which is using 192.168.1.1. But everytime when I connect my router to the gateway, the router's default IP address changes to 10.179.159.126 or some other random IP address by itself whenever I try to change to back. However, I'm still able to surf the internet and stuffs with that current settings.
Is there something that I could do to prevent the IP address from changing by itself? And will the same thing happen again when I upgrade to fibre broadband?
View 4 Replies
View Related
Sep 10, 2012
When I try to set a port for forwarding and set the IP address to forward to:192.168.1.108 (of course, I only type in that last number, 108)I get an error message that the number must be between 1 and 65535. It is! Why am I getting this error message?
View 5 Replies
View Related
Jan 25, 2012
I need to create several VLans on my switch.After reading the admin guide pdf, i still don't understand how to create any simple VLan.some tutorial or steps (with IE or Mozilla browser) how to create and use VLan, and to connect one VLan to another.For example,i need to create 3 VLans.
First Vlan consist of 5 ports (Vlan Name = Red)
Second Vlan consist of 15 ports (Vlan Name = Green)
Last Vlan consist of the rest of the ports (VLan Name = White)
View 7 Replies
View Related
Sep 9, 2012
My old modem from Roadrunner (Time Warner) died and the service man replaced it with a Arris TG852 modem/router. then my problems began. I would like to have the Arris modem act like a modem and not a router. The network governed by the DIR works fine but none of the clients can connect to the internet. Below are the steps I have tried.in both steps below, The DIR is connected to the Arris using the Ethernet not the Wan port.
1. I tried disabling DHCP on the Arris router and setting a static IP address for the DIR router. This worked for a bit and then quit. Some of the computers said there were duplicate IP addresses on the network. If fact the same IP address showed up in the DNS list of the Arris and the DIR routers.. even though the Arris router had DNS disabled.
2. After reading other forums. I enabled DHCP on the Arris and set it to passout IP address between 192.168.0.2 and 192.168.0.99. I then setup the DOR to pass out addresses between 192.168.0.100 and 192.168.0.200. then moved the DIR into the DMZ of the Arris. Still no access to the internet.
View 2 Replies
View Related
Dec 22, 2011
Trying to set up a asa 5505 in transparent firewall mode. I cannot set the management ip address:
ciscoasa> enable
Password:
ciscoasa# config term
[Code].....
View 7 Replies
View Related
Mar 8, 2013
My ISP provides two dynamic IP addresses. I have two computers that I want to each have a separate IP. I was told by the ISP, by two different CSR's, that I need a Desktop switch in addition to my Linksys WRT400 router. I purchased the D-Link 8-Port Gigabit Desktop switch and connected everything correctly. Although the internet works on both machines, they are still showing the same IP address. How do I allocate a separate dynamic IP to each machine?
View 14 Replies
View Related
Apr 9, 2013
where I can find a step by step guide of how to setup Dynamic DNS so that my PCs can be accessible from outside the LAN using Remote Desktop?
View 4 Replies
View Related
Mar 31, 2013
Exactly as the title states. I have looked at my router and whats my IP; made sure I was 100% correctly typing it in. All failed. Even resolves to the same IP.I can remote desktop, visit my forum, minecraft; all via dns but not IP.
View 13 Replies
View Related
Jan 29, 2013
Okay so I currently have an ISP that offers the standard "2 Dynamic IP's" and I'm wondering how to utilize this? The tech guy said I need a HUB...but I'm not sure what kind and where to get one etc. Secondly, even if I am able to get this second IP going, will they be entirely separate IP addresses? I need the IP addresses to be completely separate and untraceable to the same source. Is this the case or can you somehow trace back the two dynamic IP's to the same source IP? Will I need two different static IP's if I want the two connections to be entirely separate, unrelated, and untraceable from each other?
View 4 Replies
View Related
May 16, 2011
i am running a vpn between three remote offices, by making use routers that get dyndns. I would like to substitute the existing routers with Cisco 877/876 to get better management. How to do a tunnel by making use of dynamic IPs.
View 3 Replies
View Related
Feb 23, 2011
having some trouble with configuring dynamic NAT
View 15 Replies
View Related
Jan 8, 2011
I have 2 computer connected and both have dynamic IPIf I change one of my computer's IP from dynamic to static Will it be okay to another comp ? ( Can it still connected to Internet / LAN )
View 1 Replies
View Related
Jan 12, 2013
i need to change from dynamic IP to Static for work, Iv rang my provider talk talk and the only way i can do this is go to a buisness line and pay more a month is there anyway i can log into my router and change from dynamic to static myself? im not on about the IP thats starts 192.blah blah blah its the one where u go somewhere like whatsmyip.com mine is dynamic as it changes if router is reset, there is hiccup in internet or computer is off for the night etc...
View 2 Replies
View Related
Dec 30, 2011
I Have a D-Link 364M, and a dynamic IP. But I've had this IP for over 2 years now and it does not changeCalled the ISP, they said it's a router issue and I need to contact D-LInk. D-Link says they do not cover my router anymore so I can't get support. Unplugging the router for 24 hours did nothing So I assume the problem is some internal setting on the router website that is doing this.
View 5 Replies
View Related
May 7, 2011
I am using Charter and have been at this location for several year. All was well until they added one of those "walled gardens" like Comcast uses.When the cable modem comes on, and the wireless router is turned on, the router has trouble getting it's dynamic IP from the network. If I plug my workstation directly into the cable modem - bingo - IP comes very quickly every time.I have tried multiple cable modems and multiple wireless routers. I use MAC cloning otherwise Charter doesn't give an IP ever. I have tried using both Unicast and Multicast for getting the IP but, it seems like the routers request/respond to DHCP differently than a Windows PC (Vista and 7) does. If a computer and router use DHCP differently? It is weird because when there is a power outage things generally come back on without a hitch. Though if I unplug/plug the devices manually it takes me half an hour or more to get an IP most times.
View 1 Replies
View Related
Dec 17, 2012
What's the best free dynamic DNS provider?
I found a ton of them on the internet but I'm not sure which ones are safe.I'm trying to use my home NAS as an ftp server that can be accessed remotely.
View 3 Replies
View Related
