Cisco Routers :: RV220W - Dynamic DNS Returns Wrong Address
Jul 29, 2012
I think I'm missing a basic step here. In setting up a RV220W device behind either a cable modem or a DSL modem, the address that is being returned is not the public IP address of the modem, but rather the private IP address assigned by the modem to the RV220W. Doesn't matter for normal web access but trying to set up a VPN tunnel fails due to the inaccurate IP address.
If I do the same thing but use the dyndns.com application on a computer behind all of this (connected on the private LAN of the RV220W via cable), it reports the external IP address correctly. That works in some locations if I have an always on computer to load the application to. In some cases, however, there isn't such a computer to leave dedicated to running the separate program.
Since this works, and the RV220W doesn't, there is some difference between the Cisco implementation and the dyndns.com implementation.
So, is there a way to get the RV220W to return the true external IP address, or is it stuck returning a private address?
View 6 Replies
ADVERTISEMENT
Mar 23, 2012
Do not have internet connectivity, despite all the lights lit on calbe modem and the ASUS WL520GU router and only the internet and ethernet lights are lit on the Linksys 2102.Despite numerous reboots, no change and even bypassing the router and connecting directly to ATA still no conectivity.When I open a browser, it reverts to the Asus error page, "reason for failed connection: You have set the wrong dynamic or static IP address, though nothing was changed.Funny thing again, a direct internet connection to the ATA did nothing.A google search only just shows lots of unasnered posts on this issue, or only the usual 'please reboot'.
View 9 Replies
View Related
May 15, 2012
I'm using a RV220W router, and recently got shifted to a dynamic IP solution.Now, I've got a no-ip.org address, but the update service seems to be on no-ip.com. So, I try to enter mydomain.no-ip.org OR mydomain.no-ip.com in the dynamic dns settings, under Host and Domain Name, but when saving the settings it says
'The hostname specified does not exist in this user account' ,which seems to indicate that it manages to login to the update service but gets a negative reply.Is it possible to use the RV220W with no-ip.org/com?
View 5 Replies
View Related
Nov 22, 2011
We recently upgraded to Windows 7 at work and my laptop was part of the first deployment. Laptops are imaged so that all configurations/software are already set and done. My problem is as follows, my laptop is part of domain, when I am at work I can ping anything just fine (network computers, printers) BUT when I am at home, I can't even ping my own PC. It returns back with the same address over and over. No matter what I ping when I am at home, it returns back with the same address. I can ping blah and it will display same address over and over. The weird part is I can ping websites no problem, but if i ping random names it will format as follow.Lets say I want to ping lost, below is what i get (I made changes to hide domain and IP)
Pinging lost.domain.com [70.99.199.99] with 32 bytes of data:
Reply from 70.99.199.99: bytes=32 time=57ms TTL=50
Reply from 70.99.199.99: bytes=32 time=58ms TTL=50
Reply from 70.99.199.99: bytes=32 time=57ms TTL=50
Reply from 70.99.199.99: bytes=32 time=58ms TTL=50
[code].....
Notice how my domain always shows up? When I am connected to the VPN at home, I have to log onto our intranet using the IP, I can't use the name, it wont direct to it.
View 2 Replies
View Related
Oct 12, 2011
We will be opening a shop with a number of computers available to the public connected to the Web via one ISP with fixed IP using a RV220W router.
We wish to restrict web access to our company's web site only, say 'OurCompany.com'; how can we code this in the router?
View 4 Replies
View Related
Feb 5, 2013
We have a wifi router RV220W and we need to filter the mac address. The problem is that the number of the "allowed" devices is around 50 (not all connected at the same time), but the maximum number of mac address which can be listed in this router for each VLAN is 20, so for the moment we set 3 VLAN, each one with a different mac adderss list. This is very awkward because the area to be covered by the wifi network is large and we need repeaters, but having 3 VLAN we should put 3 repeaters for each point. Is there any way to configure this router in order to have a single VLAN but with a mac address filter list of 3 x 20 mac address?
View 1 Replies
View Related
Jan 5, 2013
For some strange reason I'm getting the error "WAN IP should not be a network address" when I type in an IP address under the Static IP Settings section in the "IP Address" field. My client has a static IP from his ISP and I'm trying to set it up on the router. I've updated to the latest firmware 1.0.4.17 but still the same error.
I'm not copying and pasting the address, I'm typing it in. There is no extra spaces or anything. What is this glitch? I could save the router settings and reset it and try that but I'm doing this all remotely and would rather not have to make another trip to do this onsite.
View 6 Replies
View Related
Mar 28, 2012
I was trying to set a DHCP pool with 127.16.0.0/16 with RV220W, however, RV220W UI can't save it. It displays "IP Address Range -"Step to reproduce: (it is 100% reproducible)
1. login into RV220W admin web
2. Create a VLAN, id 201
3. Go to "Multiple VLAN subnets", select the VLAN, click edit
4. Enter following info:
IP Address: 172.16.0.1
Subnet Mask: 255.255.0.0
DHCP Mode: DHCP Server
Domain Name: Cisco
Starting IP Address: 172.16.2.100
Ending IP Address: 172.16.10.254
Primary DNS Server: 172.16.0.1
Leave rest of settings with default value.
DNS proxy is enabled
5. Press Save button. The UI shows text "IP Address Range -".
Expected result: RV220W shall save the setting and make use of 172.16.0.0 subnet in IP pool. By the way, the error message "IP Address Range -" seems incompleteI tried same setting on netgear FVS318N (very similar settings to RV220W), it accepts 172.16.0.0/16 as DHCP IP pool and works.RV220W has great feature set meets my needs. Its UI is slow and sometime dashboard freezes, which I can live with comparing to features. But DHCP server IP pool can't be class B is huge limitation to me.
View 1 Replies
View Related
Aug 5, 2011
I upgraded my Linksys RV042 firmware to 1.3.12.19-tm and exported the config file, then tried to convert it using RV0xx_Migration_Utility_v1.0.2.2 in order to import it to a new Cisco RV042 (v3). The migration utility returns a config create fail message and fails to convert.
The LOG file ends with:
Get PORT_101 VLAN Group setting fail.
***log end***
how to make this work or how to move config file to v3?
View 1 Replies
View Related
Jul 16, 2011
I have a 2003 server that is doing something wrong. When I show the mac address table I can see that the server is assigning a bad mac address to several IPS. The server assign a non-existent mac address to some IPS for this reason the server stobut I would like to solve the problem
- I ran my antivirus an no virus was found.
- I updated the network driver.
View 4 Replies
View Related
Jun 21, 2011
i have a cisco router that has dhcp configured, the router ip address is 10.10.10.***. all computer that attached to the router are using static ip and works fine but when i am connecting my laptop using wireless in gets an 192.168.1.*** address.
View 17 Replies
View Related
Aug 31, 2012
I am having trouble with getting a copier that I have networked to stay registered in the system. When connecting all the equipment back for the new year I was having trouble getting this one specific copier back online properly. I used to have it assigned with a static IP because the person that was here before me had all the computers map the printer using the IP instead of Hostname but that was causing IP conflicts so I removed it and mapped the printer through Hostname which is made "MPF-TOSHRM328"So now for the actual problem, after the copier got the new dynamic IP of 10.8.214.151 i thought it would be fine and everything would click in because it was mapped to the host name and not the IP. But when I do a tracert on the hostname it still shows up with the old IP. and now that the old ip has been reassigned it actually points to a physical machine now. Weird. All attempts to flush the DNS have not resolved the issue. I even tried going in and deleting the entries in manually. No luck. As a point of reference here is the result from the tracert.Tracing route to MFP-TOSHRM328.78B450.nycboe.org [10.8.214.126] over a maximum of 30 hops: 1 <1 ms <1 ms <1 ms SLS330W09 [10.8.214.126]Trace complete. I should also mention that this server is only here in the sense that it is the DC for the computers on this floor. There is a whole other system that assigns the IP's and handles the DNS. I do not have access to it, it is run by the main network people at the central offices.
View 9 Replies
View Related
Nov 2, 2011
I have an application for work that I need to access true vpn connection :I have Sbs server 2008 with vpn support , I can access my folders and exchange and ... , this works fine.Now I have an application that search to connect to the server via local ip at work but when I use vpn to access it then the application goes searching on my local ip adress and not on the vpn ip adress.vpn has same ip as local ip at work).Now my question is: Can I set the application to search on the range of my vpn connection instead of searching on my local ip when i am not at work but on a different site ?I tryed almost anything but the application still looks directly on my local ip instead of the ip of my vpn
View 8 Replies
View Related
Mar 23, 2011
I have tried to search for an answer on the forum but I cannot find the correct answer to my issue. I'm having a problem where my dir655 updates the wrong ip adress to dyndns server. It always report 255.255.255.255. The dyndns information is all entered correctly and says "connected" in the dyndns configuration. So what is wrong with the adress update from the dir-655 to the dyndns server ? Of course I cannot use my dyndns adress since it is always at the wrong adress.
View 16 Replies
View Related
Mar 30, 2013
I have an Amilo Pa1510 (Windows XP) and I can connect to the router but not surfing (browser doesnt load any website). I have tried the commands "ping" to my IP address and it works but ping to the default gateway IP address doesnt work either.I am using the same wireless connection right now with my smartphone. I have downloaded an app that executes the ipconfig command in my Android. I have used the same gateway IP address in my laptop but it didnt work either. I have tried to set automatically the IP addresses in my laptop without success too. I have turned off and on both laptop and router and also checked in the system window that all the processes such as DHCP and DNS servers are automatic and enabled.
View 4 Replies
View Related
Sep 3, 2009
DHCP enabled with default settings. Dynamic IP range from 192.168.0.100 - 192.168.0.199.Router shows laptop with 192.168.0.199 however when I check the IP on laptop I have 192.168.100.10 and both laptops are connected on my SSID with 90% signal strenght.
View 4 Replies
View Related
Mar 29, 2012
I have 2 units Cisco WLC 5508 running software version 7.0.220 with 70 over units Cisco AP 1262N and 1242AG. Some of wireless clients having problem to get the correct IP address from the DHCP server. There are 2 units of Microsoft DHCP. Both DHCP server ip have been configured on the Interface at the WLC. The core switch also being configured with ip helper. I've attached the debug output of one of the wireless client during the problem.
View 12 Replies
View Related
Jan 9, 2012
Frameware version: 1.0.03.
Environment: Internet (external IP say 24.x.x.x) ISP provided modem+router (192. 168. 1.x/ 24 IPTV network) E4200 (192.168.0.x/24 my home network).
The DDNS option page did report update succefully and shown the external IP address correctly on the page, however when I login to dynDNS it shows 192.168.1.x, which is the E4200 IP dhcp from the ISP's router.I know that it's double NAT, but the 192.168.1x/24 subnet is the IPTV subnet, and my old Dlink router did support and update the dynDNS entry properly.
View 4 Replies
View Related
Jan 19, 2011
I have a PC that I would like to access remotely though VPN. My internet service provider is Time Warner Cable and it provides me with a dynamic Ip address.
View 5 Replies
View Related
Mar 9, 2013
I'm trying to set my PC to have a Static IP but I'm having no luck. I've got it working before and was able to forward ports, but that was with my old PC.My problem is when I go into my wireless properties and change the TCP/IP settings from find automatically to custom settings, it says I need to reboot my PC. I do that but no matter what I do the settings are back to default, automatic settings when I reboot.The only difference between this new PC and the old one is that this one is using an SSD for my OS and a normal HDD for my Data.
View 14 Replies
View Related
Aug 3, 2011
I'm having some trouble configuring 2 cisco routers (877) with ipsec vpn tunnel.The 2 of them are linked to the internet with dynamic adsl's - their ip-addresses changes all the time.when the configuration is based on ip addresses it's working ok, but when I'm trying to use host name with the DDNS feature, it's not coming up, I get a lot of errors...
I've searched google and various posts regarding that issue.It's seems like it's possible to do a dynamic-ip to dynamic-ip ipsec tunnel, but I found zero manuals and configuration.I've added the template that I'm using to configure the tunnel with ip addresses.
View 2 Replies
View Related
May 3, 2011
I am wondering if there is any way to get the name and last name of the person that has the internet connection corresponding to a particular dynamic IP address that I know, that was used to send an email at a particular date and time that I also know.
View 5 Replies
View Related
Oct 23, 2012
How to change my dynamic ip address in windows 7
View 2 Replies
View Related
Apr 12, 2011
how can I track a dynamic IP address. The reason why I am asking is because my dad lives about 40miles from me and I would like to logon to his computer from my apt and my dad is currently using frontier dsl connection with a westell 6100 modem. Is there any software or what do I need to do to configure this?
View 6 Replies
View Related
Mar 6, 2011
connecting a VPN with a dynamic IP address (its a Draytek 2700)We have a customer who has a PIX515E on the central site .Than there are more 2 sites where he installed 2 Draytek 2700 ,and contracted 2 fixes IP addresses for them.These are working fine and always did.In another site they are doing building renewals ,só they will not have ADSL for about 2 month,and they connected a 3G Internet access wich is connected to a Draytek 2710 ,internet wich is working fine,but doesnt have a fixed ip address.
I had search a lot in Cisco support pages,but i can´t find this solution,cause the examples are only to 1 dynamic peer ,not mixed(multiple fixed ip addresses + 1 or more dynamic)The PIX also needs to receive VPN connections from remote users who connect via Cisco VPN client(is working fine too) [code] I know now that when a communication starts from that dynamic peer to the PIX ,PIX doesnt know in wich group he should assign it.So the communication stops.i tried to create a group-policy...but i dont know how to associate it with the tunnel group.I also know that we can just associate 1 crypto map to each interface.
View 2 Replies
View Related
Jun 29, 2012
do internet cafes use static ip or dynamic ip address. Also what would be the benefit if they used a static ip address.
View 1 Replies
View Related
Feb 21, 2013
I tried to update our production switch over the weekend with a newer unmanaged Gigabit switch. Everything was fine after the change and the network had a noticeable change in speed.But when I came back in on Monday the Internet was down. So I tried trouble shooting the switch to see if there was a loop or something like that and put it into managed mode so I could look at the config page and take advantage of the STP function. When trying to get to the config page I entered the default IP into my browser and a logon appeared so I tried to login and it failed then I noticed that the title of the browser tab said RVS4000. So out of curiosity I entered the creds for the router and lo and behold it let me in to the router. The router has a static IP and is using a different subnet then the default IP of 192.168.2.1 that the switch has. I have put the old switch back and removed the new one from production but can still get to the router with either IP, it's static address and the 2.1 address.
View 4 Replies
View Related
Sep 19, 2012
I tried to update our production switch over the weekend with a newer unmanaged Gigabit switch. Everything was fine after the change and the network had a noticeable change in speed. But when I came back in on Monday the Internet was down. So I tried trouble shooting the switch to see if there was a loop or something like that and put it into managed mode so I could look at the config page and take advantage of the STP function. When trying to get to the config page I entered the default IP into my browser and a logon appeared so I tried to login and it failed then I noticed that the title of the browser tab said RVS4000. So out of curiosity I entered the creds for the router and lo and behold it let me in to the router. The router has a static IP and is using a different subnet then the default IP of 192.168.2.1 that the switch has. I have put the old switch back and removed the new one from production but can still get to the router with either IP, it's static address and the 2.1 address.
View 2 Replies
View Related
Dec 19, 2011
I have a high speed wireless DSL router from my ISP (Telus). I use one port off the router to connect directly to my desktop computer. Another port is connected to a switch to which ethernet cables to three other rooms are connected. My problem is that when I connect my Bell PVR (9242) to the 'switched' ethernet cable, I'm apparently not able to get a dynamic ip address, which the Bell unit requires, and can't connect to the network.can I connect another router, in place of the switch, to deliver dynamic IP addresses to whatever I connect to the ports in the other rooms in my house?
View 2 Replies
View Related
Nov 13, 2011
i have internet connection which is connect using dynamic ip address but if i add ip address in Local Area Connection i get two networks, one is internet dynamic ip & other one is ip which i setup in Local area connection. so if i select LAN network for lan clients i can access lan. but now i have DLINK DIR 615 router so what should be my settings?
View 3 Replies
View Related
Sep 21, 2011
I have a problem connecting SRP541W to my ISP (L2TP). Connection is established, but default routing table is wrong: instead of gateway I see Server IP: [code]
In similar situations other users of my ISP with Cisco routers (IOS) solved this problem by adding command no peer neighbor-route but i can't do it through the WEBgui...
View 3 Replies
View Related
Feb 16, 2013
I purchased a new BelkinN750 DB router on 2/12/2013. It seems to think the date is Jan. 1 1970. How can i fix this problem or should I just return it and buy another brand?
View 2 Replies
View Related
Oct 3, 2012
I have a RV042 router. The problem that I am having with it is that the DHCP is giving out the wrong Default Gateway and DNS Server. There is no option to change the DHCP server IP on any of the settings pages on the router. I am begining to think that there might not be a way to do it. I see that there is an option for the DNS under the DHCP page but the Public IP that is being handed out is not the one on that page. I also have 2 WAN connections hooked up as well a DSL link and a Cable link (the cable link is the primary one).
The following information is provided in an effort to resolve this issue:
IP of Router 10.0.0.2
IP of DHCP Server (the one that is being handed out):10.0.0.1
IP of DNS (the one that is being handed out): 10.0.0.11
What I want to it be.
IP of Router: 10.0.0.2
IP of DHCP 10.0.0.2
IP of DNS 10.0.0.2
View 3 Replies
View Related
