Application Searching Access On Wrong IP Address?

Nov 2, 2011

I have an application for work that I need to access true vpn connection :I have Sbs server 2008 with vpn support , I can access my folders and exchange and ... , this works fine.Now I have an application that search to connect to the server via local ip at work but when I use vpn to access it then the application goes searching on my local ip adress and not on the vpn ip adress.vpn has same ip as local ip at work).Now my question is: Can I set the application to search on the range of my vpn connection instead of searching on my local ip when i am not at work but on a different site ?I tryed almost anything but the application still looks directly on my local ip instead of the ip of my vpn

View 8 Replies


ADVERTISEMENT

Cisco Application :: ACE 4710 Active Connections View Wrong In Web Manager

Sep 28, 2011

I have a problem in the ACE 4710. In view of the connections of a web environment. When I view connections on Config> Operations> Real Servers, Conns column values ​​appear very high connections (Example. 1606317769078).Already in Config> Operations> Virtual Server the number of connections appear normal. Version 4710 ACE Device manger A4 (2.1a)

View 1 Replies View Related

Cisco Application :: ACE 4710 Configuration - Client / IP Address Access For Web Server

Oct 15, 2011

I want to use one arm infrastructure of ACE4710. But I remember it was problem for back end server can not get logging for which client/ip address access the web server.

View 3 Replies View Related

Assign Wrong Mac Address?

Jul 16, 2011

I have a 2003 server that is doing something wrong. When I show the mac address table I can see that the server is assigning a bad mac address to several IPS. The server assign a non-existent mac address to some IPS for this reason the server stobut I would like to solve the problem

- I ran my antivirus an no virus was found.

- I updated the network driver.

View 4 Replies View Related

Hostname Is Resolving The Wrong IP Address

Aug 31, 2012

I am having trouble with getting a copier that I have networked to stay registered in the system. When connecting all the equipment back for the new year I was having trouble getting this one specific copier back online properly. I used to have it assigned with a static IP because the person that was here before me had all the computers map the printer using the IP instead of Hostname but that was causing IP conflicts so I removed it and mapped the printer through Hostname which is made "MPF-TOSHRM328"So now for the actual problem, after the copier got the new dynamic IP of 10.8.214.151 i thought it would be fine and everything would click in because it was mapped to the host name and not the IP. But when I do a tracert on the hostname it still shows up with the old IP. and now that the old ip has been reassigned it actually points to a physical machine now. Weird. All attempts to flush the DNS have not resolved the issue. I even tried going in and deleting the entries in manually. No luck. As a point of reference here is the result from the tracert.Tracing route to MFP-TOSHRM328.78B450.nycboe.org [10.8.214.126] over a maximum of 30 hops: 1 <1 ms <1 ms <1 ms SLS330W09 [10.8.214.126]Trace complete. I should also mention that this server is only here in the sense that it is the DC for the computers on this floor. There is a whole other system that assigns the IP's and handles the DNS. I do not have access to it, it is run by the main network people at the central offices.

View 9 Replies View Related

Cisco Router Giving Out Wrong Address?

Jun 21, 2011

i have a cisco router that has dhcp configured, the router ip address is 10.10.10.***. all computer that attached to the router are using static ip and works fine but when i am connecting my laptop using wireless in gets an 192.168.1.*** address.

View 17 Replies View Related

Error - Wrong Static Or Dynamic IP Address?

Mar 23, 2012

Do not have internet connectivity, despite all the lights lit on calbe modem and the ASUS WL520GU router and only the internet and ethernet lights are lit on the Linksys 2102.Despite numerous reboots, no change and even bypassing the router and connecting directly to ATA still no conectivity.When I open a browser, it reverts to the Asus error page, "reason for failed connection: You have set the wrong dynamic or static IP address, though nothing was changed.Funny thing again, a direct internet connection to the ATA did nothing.A google search only just shows lots of unasnered posts on this issue, or only the usual 'please reboot'.

View 9 Replies View Related

D-Link DIR-655 :: Router Update Wrong Dyndns Address

Mar 23, 2011

I have tried to search for an answer on the forum but I cannot find the correct answer to my issue. I'm having a problem where my dir655 updates the wrong ip adress to dyndns server. It always report 255.255.255.255. The dyndns information is all entered correctly and says "connected" in the dyndns configuration. So what is wrong with the adress update from the dir-655 to the dyndns server ? Of course I cannot use my dyndns adress since it is always at the wrong adress.

View 16 Replies View Related

Amilo Pa1510 Connected But Not Surfing (wrong Gateway IP Address)

Mar 30, 2013

I have an Amilo Pa1510 (Windows XP) and I can connect to the router but not surfing (browser doesnt load any website). I have tried the commands "ping" to my IP address and it works but ping to the default gateway IP address doesnt work either.I am using the same wireless connection right now with my smartphone. I have downloaded an app that executes the ipconfig command in my Android. I have used the same gateway IP address in my laptop but it didnt work either. I have tried to set automatically the IP addresses in my laptop without success too. I have turned off and on both laptop and router and also checked in the system window that all the processes such as DHCP and DNS servers are automatic and enabled.

View 4 Replies View Related

D-Link DIR-655 :: DHCP Assign Wrong IP Address To Client Laptops (2)

Sep 3, 2009

DHCP enabled with default settings. Dynamic IP range from 192.168.0.100 - 192.168.0.199.Router shows laptop with 192.168.0.199 however when I check the IP on laptop I have 192.168.100.10 and both laptops are connected on my SSID with 90% signal strenght.

View 4 Replies View Related

Cisco Routers :: RV220W - Dynamic DNS Returns Wrong Address

Jul 29, 2012

I think I'm missing a basic step here.  In setting up a RV220W device behind either a cable modem or a DSL modem, the address that is being returned is not the public IP address of the modem, but rather the private IP address assigned by the modem to the RV220W.  Doesn't matter for normal web access but trying to set up a VPN tunnel fails due to the inaccurate IP address.
 
If I do the same thing but use the dyndns.com application on a computer behind all of this (connected on the private LAN of the RV220W via cable), it reports the external IP address correctly.  That works in some locations if I have an always on computer to load the application to.  In some cases, however, there isn't such a computer to leave dedicated to running the separate program.
 
Since this works, and the RV220W doesn't, there is some difference between the Cisco implementation and the dyndns.com implementation.
 
So, is there a way to get the RV220W to return the true external IP address, or is it stuck returning a private address?

View 6 Replies View Related

Linksys Wireless Router :: E4200 Update DynDNS With Wrong IP Address

Jan 9, 2012

Frameware version: 1.0.03.
Environment: Internet (external IP say 24.x.x.x) ISP provided modem+router (192. 168. 1.x/ 24 IPTV network) E4200 (192.168.0.x/24 my home network).

The DDNS option page did report update succefully and shown the external IP address correctly on the page, however when I login to dynDNS it shows 192.168.1.x, which is the E4200 IP dhcp from the ISP's router.I know that it's double NAT, but the 192.168.1x/24 subnet is the IPTV subnet, and my old Dlink router did support and update the dynDNS entry properly.

View 4 Replies View Related

Cisco Wireless :: WLC 5508 - Lightweight AP Client Getting Wrong IP Address From DHCP Server

Mar 29, 2012

I have 2 units Cisco WLC 5508 running software version 7.0.220 with 70 over units Cisco AP 1262N and 1242AG. Some of wireless clients having problem to get the correct IP address from the DHCP server. There are 2 units of Microsoft DHCP. Both DHCP server ip have been configured on the Interface at the WLC. The core switch also being configured with ip helper. I've attached the debug output of one of the wireless client during the problem.

View 12 Replies View Related

Searching For Available Wireless Networks

Jan 26, 2011

I've just reformatted my computer and reinstalled windows xp but i can no longer find the window where you search for available wireless networks. It used to be a little icon in the bottom right of the task-bar.

View 6 Replies View Related

Cisco :: Searching With Question Mark

Oct 2, 2012

Is there any way to do,i on the help menus (what you get when you put in "?")?

View 3 Replies View Related

Cisco AAA/Identity/Nac :: ACS 5.2 Multiple Domain Prefix Searching?

May 23, 2011

We have an ACS 5.2 server connected to an AD domain controller which has several trusted domains.  (domain1, domain2, domain3)  We currently have to specify which domain each user belongs to (ie, domain1user) in order to connect.  We would like to only have to enter the user name without the prefix, (ie, user1) and have ACS automatically check each domain for a match.  Is this possible with ACS 5.2?  I seem to remember this was possible with ACS 4.2.

View 2 Replies View Related

Cisco Wireless :: PCEX-3G-HSPA Searching For Drivers

Oct 11, 2011

I have found in my storage a device: PCEX-3G-HSPA (attached a photo of it)

And wanted to use it, but cant find any drivers for it. My OS is Windows 7 64bit. How to make this device to work under Win 7?

View 1 Replies View Related

Cisco WAN :: 2821 Searching High And Low For Blank Stencil To Fill In Module

Apr 25, 2010

I've been searching high and low for a "blank" stencil to fill in module and WIC areas of a 2821 router that I'm diagraming. Where I can get a hold of something that will work?  It seems that Cisco is somewhat lax lately on their visio stencil offerings.

View 6 Replies View Related

Cisco Application :: ACE 4710 FT IP Address Change

Aug 22, 2011

Any document that details the steps to change the FT ip addresses of a pair of Cisco  4710 whilst they are running in a production environment without causing an outage?

Would the steps be:
On the secondary unit:
hbs-syd04-lb01ft interface vlan 417 ip address 172.30.254.221 255.255.255.252 peer ip address 172.30.254.222 255.255.255.252

Then on the primary unit:
hbs-syd04-lb01ft interface vlan 417 ip address 172.30.254.221 255.255.255.252 peer ip address 172.30.254.222 255.255.255.252

Or Vice Versa?

View 1 Replies View Related

Cisco Application :: Cannot Ping Only One VIP Address At ACE 4710

Feb 2, 2012

I have a problem with an ACE 4710 regarding to the ping of especially one VIP address.
 
[code]...
 
At the Box I setup 10 Servcies, all with different VIP addresses, also the IP is not used duplicate somewhere in the network.
 
in the class defined under Policy-Map Multi-Match  I setup identical to the others loadbalance vip icmp-replay active, the VIP is usable by the defined service http, the serverfarm is up and running all ok so far  but this VIP does not respond to ping even the correct arp resolution was done.
 
I started also a capture locally on the ACE and see the ICMP - Echo coming in, but the box sends no echo-reply back.
 
In the access-lists Management and so on I allowed icmp and also on all interfaces the icmp guard is disabled...

View 10 Replies View Related

Cisco Application :: ACE 4710 Source Ip Address In Logging

Mar 21, 2013

I've configured the ACE4710 to bring the logging to a syslog server! Here's the configuration

[...]
logging enable
logging fastpath

[Code]....
 
I saw to log with connection on the syslog server but It would be interesting to know the "source ip address" and my question is : It may be possible to configure for the logging a kind of "transparent pass through"?

View 2 Replies View Related

Cisco Application :: ACE 4710 - FT Pair IP Alias Address

May 8, 2012

I have recently configured a pair of ACE 4710 appliances in a FT group. The ACE's are deployed in one-arm mode, using Source NAT, with all routing to and from being done by a pair of PIX firewalls.
 
My configuration does not include the use of an "alias" IP address on the data VLAN interface within each of my contexts.
 
My understanding is that the "alias" IP address is similar to a HSRP address and if the ACE is deployed in Routed mode the default gateway for the servers can be configured with the "alias" address so as this is always available even if a fail over occurs.
 
if this is a correct interpretation and of use of the "alias" IP address and if so whether it is required when using a one-arm mode topology?

View 3 Replies View Related

Cisco Application :: CSS 11501 Load Balancing With X-forwarded For Address

Sep 15, 2011

We have a pair of CSS 11501,Currently it is using source ip for load balancing and 5 servers as backend , however we have users loggin in using http and based on its source IP (ISP PROXY) , it is forwarded to SERVER A.However, we have a SSL page and when the client switches over to SSL , it is forwarded to SERVER B/C/D/E  based on its source IP ( REAL CLIENT IP) .This will cause the user to be terminated as the 5 servers are independent and not running in a cluster.
 
Is there any way that we can use the X-Forwarded-For address to load balance so that when users loging , they are sent to SERVER A (Based on X-Forwarded-For Header IP which translate to REAL CLIENT IP).This way we are able to also send it back to the same server when it uses SSL.I believe that we should be able to load balance using X-Forwarded-For IP or to rewrite the X-Forwarded-For IP into client source IP.

View 3 Replies View Related

Cisco Application :: Services With Different IP Address Subnets Over CSS 11500 Series

May 11, 2011

I have two CSS 11500 series.In just a few months i will have ready a DRS (Disaster Recovery Site), where i will have 2 more servers to add to the environment.

View 3 Replies View Related

Cisco Application :: ACE 4710 Original Client IP Address Reconstruction?

Jan 12, 2011

configuration example on how to reconstruct the original client IP address from X-forwarded-for in HTTP request?

View 4 Replies View Related

Cisco Application :: ACE20 / Configuring Timeout For IP Address Stickiness

Jan 18, 2012

We are using an ACE20 module running version A2(3.2).I have a question regarding IP stickyness and the timeout parameter.I found this in the "Server load balancing configuration guide" (in a section entitled: "Configuring a Timeout for IP Address Stickiness"):
 
"The sticky timeout specifies the period of time that the ACE keeps (if possible) the IP address sticky information for a client connection in the sticky table after the latest client connection terminates. The ACE resets the sticky timer for a specific sticky-table entry each time that the module opens a new connection or receives a new HTTP GET on an existing connection that matches that entry."
 
The parts in bold seem to point to the fact that the timeout is an "inactivity timeout" as the counter is reset on every new connection.The next section in the documentation is entitled: "Enabling an IP Address Sticky Timeout to Override Active Connections" and says:
 
"By default, the ACE ages out a sticky table entry when the timeout for that entry expires and no active connections matching that entry exist. To specify that the ACE time out IP address sticky table entries even if active connections exist after the sticky timer expires, use the timeout activeconns command."
 
This seems to contradict the previous statement.So my question is: is the IP stickyness timeout an "inactivity timeout" or not?

View 1 Replies View Related

Cisco Application :: ASA 5505 To Bypass WCCP For Specific Public IP Address

Jun 29, 2011

Currently using WCCP with squid for content filtering. One of our sites we connect to needs to see the connection coming from our public IP address, not the proxy server IP. I've created a acl in squid for direct lookup, but the website gets angry with the X-Forwarder-Header squid attaches to each packet. Is there a way in a cisco ASA 5505 to bypass wccp for a specific public ip address or url?

View 4 Replies View Related

Cisco Application :: CSS11503 / Make NAT From Inside Addresses And Translate Into One External IP Address?

Dec 8, 2011

I know the CSS is too old but I have one in production environment and I was asked if it is possible to CSS to make NAT from inside addresses and translate them into one external IP address to diferent kind of communications, for example: 172.16.4.9 and 172.16.4.10 (inside addresses) should start connection to external IP addresses destinations 50.50.50.50 / 60.60.60.60  70.70.70.70 / 80.80.80.80 and so on, the default gateway to those Servers is the CSS and I would like to know if it is possible that all connection to external world to be translate into one IP address 172.16.4.100.
 
My CSS is 11503
Version: sg0810106

View 2 Replies View Related

Cisco Application Networking :: ACE4710 - Can't Assign IP Address To Physical Ethernet Port

Jan 4, 2013

My customer wants each ACE4710 (of a highly available cluster) to have its own, dedicated port for management purposes.
 
According to documentation, IP addressing can be applied to VLAN interfaces, so in order to satisfy the requirement, I should make one port belong to an "access VLAN X", and then apply IP addressing to the corresponding "interface VLAN X". This should satisfy my customer´s requirement in an indirect way.
 
But... ¿ Can´t I just configure IP address on one of the 4 ethernet ports in order to save the work of building the aforementioned VLAN? I am asking this since I do not have access to a real box in order to verify.

View 2 Replies View Related

Cisco Application :: Does 6500 SUP720 / 2T Support MAC Address-Table Move Update Feature

Apr 21, 2013

Does 6500 SUP720/2T support MAC Address-Table Move Update Feature?

View 1 Replies View Related

Cisco Application :: 4710 ACE Source-address Matching In Nested Class-maps Not Working

Sep 6, 2012

Im having a (from google-fu) seemingly unique issue with load balancing. So for background, I am running the ACE 4710 device in "on a stick" mode, so I am using NAT and all that good stuff. I am also utilizing class maps and host header matching so I can save on IP space. [code]

Basically, as soon as I add that ACL_CLASS_beta.mainsite.com class map, all I get back from the ACE is RST packets and it comes back with an L7 LB Policy Miss.
 
It SEEMS like it should work, but it doesnt seem to like matching on those source addresses at all.

View 1 Replies View Related

Linksys Wireless Router :: E1200 When Run Cisco Connect After Couple Minutes Searching / Can't Find Router

Mar 9, 2012

I want to use cisco connect with the Router E1200. There is a wireless connection between laptop and E1200 Router. When I run the "Cisco Connect" after couple minutes searching It can not find the Router and I have to put an (Router name SSID) and password.

View 9 Replies View Related

D-Link DCS-942L :: Searching Support Website Getting No Link

Jan 30, 2012

I have 1.00 build 0522 and searching the support website I see no link.  But reading here I see there is a later version.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved