Cisco Application :: ASA 5505 To Bypass WCCP For Specific Public IP Address
Jun 29, 2011
Currently using WCCP with squid for content filtering. One of our sites we connect to needs to see the connection coming from our public IP address, not the proxy server IP. I've created a acl in squid for direct lookup, but the website gets angry with the X-Forwarder-Header squid attaches to each packet. Is there a way in a cisco ASA 5505 to bypass wccp for a specific public ip address or url?
View 4 Replies
ADVERTISEMENT
Jul 25, 2012
My company wants to create a VPN Tunnel to allow a remote office to connect to ours. I purchased 2 ASA 5505 and I was expecting to be able to set this up without any issues. Sadly, that is not the case.
What I'm having trouble with is configuring my Public IP Address to the device. I go through the setup wizard and enter the IP Address like normal, but I have no option to input my ISP's subnet, Gateway or DNS. Without those, I get no internet connection. I know there is a way to do this, but I'm stumped.
My Specs:
2 ASA 5505 series
ISP Modem (Which they control) - SMC SMCD3GN with DHCP disabled
View 1 Replies
View Related
Feb 3, 2013
I have ASA 5505 with basic licence, v9.1, ASDM 7.1. I want to create the DMZ for a web server.
The interface 0 is for the outside network The interface 6 is for the DMZ All other interfaces are for the inside network
My ISP provided me with one public static IP address, one gateway address and a subnet mask 255.255.255.252
1/ I would like to ask which interface I should assign the public static IP address to. Should it be assigned to the outside interface 0, or should it be assigned to the DMZ interface 6, while outside interface would be configured to use DHCP?
I tried to assign the static IP address to the outside interface first, but then when I used ASDM the “Public Servers” feature to configure NAT, I get error message that the outside interface and the public address cannot have the same IP address.
2/ For the sake of peace of mind, I am thinking about using the second firewall, which would be used only for the inside network. Can I connect this second firewall to one of the inside interfaces of the 1st firewall,
View 4 Replies
View Related
Mar 4, 2011
I just switched schools and I work for HP's marketing team part time which entitles me to get on some websites blocked by our school's network (sonicwall block).I then tried a proxy on Firefox and it was blocked as the sonicwall detected that I was using a proxy. Why did this happen and is there a way to bypass?This is mainly on wired connection as the Ethernet isn't god awfully slow like wireless is.
View 1 Replies
View Related
May 26, 2012
We have 2 TS (Terminal Servers) and have configured the 1st RDP using my public address (say 8.8.8.8) on port 3389. it is working very well of course. However I need setup my 2nd TS but will use port 7777 on the same public address which is not working.I am using ASDM 6.3 and firmware 8.3.1.Is this a limitation for this IOS?
View 6 Replies
View Related
Dec 19, 2011
I have an ASA 5505 configured with internal network, a DMZ, and a VPN on seperate subnets. The implicit rules allow my internal client computers to connect to the web servers on the DMZ IP, but I can not connect to the public NAT address from the internal network. I have a DNS server on my internal network and it does resolve to the public IP correctly. NAT seems to be working correctly because if I go outside the network and connect to the public IP or qualified name then I can get to everything correctly. I do not see any messages in the Cisco logs and the packet trace tool shows the route of http from an internal IP adddress to the external (NATed) address is allowed.
Specifically, I can go to http://192.168.1.121 from the internal (192.168.0/24) network, but I can not go to http://72.22.214.121 (the NAT address) from the internal network. If I am outside my cisco then I can go to http://72.22.214.121 easily. [code]
View 1 Replies
View Related
Nov 14, 2011
My problem is, it doesn’t seem like packets are making it to the linux/squid caching device, based on cache logs. Workstations that are being redirected in the router have no web browser access (they can ping 8.8.8.8 and google.com)
I have a linux box running squid successfully, which supports GRE WCCP. For the sake of argument, I will say that I am confident I have successfully configured that machine.
What’s really strange is this morning I came in and hind sight my test workstation looked like it may had restarted from an update. (maybe had internet access). The first thing I did was tweak the cisco config, as I was reading last night and saw:
“Be warned that if you are using NAT you MUST use the inbound interface otherwise the router only sees the NATted IP address as the source of your clients. This is bad, because the router is also therefore unable to see your cache engine and it will redirect the cache engine requests back upon itself.”
So I turned <ip cef> on and removed the <ip wccp web-cache redirect out> (I had in fa0/1 and out fa0/0 on overnight).
Then I proceeded to check the workstation and saw it had network access, I tested to see if it was in fact filtered by the proxy, and it was! (verified by cache logs aswell)
After some further successful testing, I made sure I saved any unsaved configuration changes, I rebooted the linux box and the router. Sadly the outcome was not good, I am back to where I was last night.
My router does routing/NAT and has two interfaces and is currently not running CEF
ip wccp web-cache redirect-list SQUID_PROXY
!
interface FastEthernet0/0
description WAN
ip address 1.2.3.4 255.255.255.248
ip nat outside
ip virtual-reassembly max-reassemblies 64
speed 100
full-duplex(code)
View 6 Replies
View Related
Nov 19, 2011
I am getting the following message while trying to configure WCCP redirection on my 7200 router.
I have added this router to the routerlist of the WAE edge device. Ping is successful, but the following problem prevails.
NASCM-MPLS#show ip wccp
Global WCCP information:
Router information:
[Code]....
View 1 Replies
View Related
Jul 30, 2012
I have a requirement to bypass some specific traffic (with particular source to specific internet destination) in ACE 4710.
All the webtraffic (http and https) is configured to loadbalance to my proxies , i need to configure some specific traffic with source and destiantion to internet to byepass from this loadbalancing and directly got to outside interface .
View 1 Replies
View Related
Oct 25, 2011
I use a router RV082 with load balancing. My problem is when I try to access a specific site, I get the error message that my IP address changes and I can not use 2 ip address. I want to specify an ip range to always use the same WAN port.
View 2 Replies
View Related
Jan 1, 2013
I'm looking for a way to configure Cisco ACE4710 loadbalancer to bypass traffic that is initiated from server side to Internet?Are there any way to configure this, so that the loadbalancer will not maintain session for this bypass traffic to maximize throughput?
View 1 Replies
View Related
May 23, 2012
I've been looking around Cisco's website but I can't find an answer to this -- If the 2900 platform suppots WCCP redirection using GRE?
View 1 Replies
View Related
Nov 9, 2011
if a Cisco router or switch can handle wccp redirection enabled for both waas and some other web content filtering appliance using a different service group?
seems like the priority value would come into play determining which service group gets handled first?
we currently do WCCP for WaaS on our 3945s.
I am going to advocate to my customer that we separate this out for CPU load issues, config complexity issues, IOS issues, etc... but the question is going to come up - "can we do WCCP for different applications on our Catalyst 3750 core switch, or our 3945 WAN routers?"
View 2 Replies
View Related
Jul 18, 2012
I'm trying to configure MAB on a Cisco 3560G to work with FreeRADIUS.
I have been assured that my RADIUS configuration is fine and the server is functioning properly.
This is my current switch config:
Header 1
!
version 12.2
no service pad
[Code].....
View 2 Replies
View Related
Dec 30, 2011
Charter tech came today to solve my problem of my new modem not working, he fixed the Modem but i think he did something to the lan proxy settings after.I'm trying to set up my Belkin wireless G router but i do not have the orginal CD. What should my address be under the "Use a Proxy server for your LAN" checkbox and what is the port and should i check off the bypass proxy server for local address box?
View 4 Replies
View Related
May 14, 2013
How can I hold the public IP on my cisco client VPN NAT session so nobody else can use it? I have a cisco asas 5510 inside is 172.10.20.86 public 166.245.192.90
View 1 Replies
View Related
Jan 30, 2012
How can I hold the public IP on my cisco client VPN NAT session so nobody else can use it? I have a cisco asas 5510 inside is 172.10.20.86 public 166.245.192.90
Did I need to call my ISP?
View 3 Replies
View Related
Sep 15, 2012
As per CISCO QoS document URL, IOS from 12.2(13)T support drop command in policy map. But our CISCO ASR 1013 having IOS of Version 15.2(1)S1 doesn't have drop syntax.How can we drop specific application using QoS in ASR 1013 of IOS version 15.2 and higher?,Can I allow few users for a particular application (like P2P) and drop other users based on users source IP?
View 2 Replies
View Related
Feb 28, 2011
Is it possible to assign public IP address as Router's local IP address (RVL200, RVS4000)?
View 1 Replies
View Related
Apr 26, 2011
On my cisco IOS 12.4 router,Can i make it so only lets say mac address 11:22:33:44:55:66 able to use ip address 10.10.10.2?I want this so that only this IP can configure servers, and so if the computer using it is turned off, any other device cannot use the IP address.
View 6 Replies
View Related
Jan 28, 2011
I'm trying to setup a Application specific proxy. I have tried everything that I could find via Google search and nothing seems to work. All the proxy servers I have found seem to be centered around web browsers such as IE, and firefox.
View 2 Replies
View Related
Feb 4, 2013
is it possible to construct the L7 HTTP class-map expression to match all URLs except one? I have 1 correct url, for example: /correcturl.* and want to redirect requests to all other possible URLs to this one, without the need to list them all in "possitive match" statements.
View 6 Replies
View Related
Feb 16, 2012
I am facing problem with ACE configuration. I want to redirect 443 traffic to my Proxy Server. But I am not able to do this. I want to redirect only subnet 192.168.80.0/24..Then only it is working but I dont have to have this policy to be applied on all the users only one subnet I want to have under HTTPS policy.
how can I apply the policy only on specific subnet so that port 443 traffic can be redirect and rest of all subnets can go direclty to Internet.
View 8 Replies
View Related
Apr 24, 2011
What i am trying to achive is allow only specific mac addresses on switch and deny all others by using MAC ACE. What should i do? First deny any any and then permit or ?
View 1 Replies
View Related
Nov 27, 2012
1)is there any methods to let LMS 4.2 discover Cisco devices based on specific ip like Loopback address ? coz in my Cisco devices i have more than ip address configured?
View 4 Replies
View Related
Mar 26, 2013
Any solution for NAT only for a specific ip address or a range of ip addresses from the same subnet?
I've read that the router in gateway mode automatically makes the translation and in router mode does not. Starting from this, is there any way to nat from firewall access rules only.
View 5 Replies
View Related
Jan 26, 2013
just getting started with ASA's. I've got my 5505 almost 100% configured but my port 25 forward to my Exchange server. Currently I've got an access list forwarding all traffic that hits the outside interface on port 25 to my Exchange server (access-list outside-in extended permit tcp any object mail-port-25 eq smtp). What I'd like to do now is say that only port 25 traffic from specific IP subnets gets forwarded. I thought I read that there's a couple of way to do this (from the inside interface, from the outside interface).
Also, what happens to port 25 hits that don't fall within the range I specify? Do they get a disconnect reply or do they just get ignored (no reply whatsoever)?
Edit: ...just to clarify, the allowed IP's I will be entering are the WAN IP's of my AS/AV service.
View 6 Replies
View Related
Apr 22, 2012
I'm using an ASA5505 (8.4(1)) and would like to block port 80 on a specific host in the LAN so machines in other remote LANs connected via VPN can't access this port on the host. Devices in the local LAN should have access to this port on the host. Here are the commands I'm using:
-access-list block_port extended deny tcp any host 10.20.10.20 eq 80
-access-list block_port extended permit ip any any
-access-group block_port out interface inside
These commands are not working as I would expect them to. When I browse to http://10.20.10.20 from a remote machine over the VPN tunnel I am able to access the host web server.
View 2 Replies
View Related
Feb 1, 2012
I've setup my VPN on the cisco ASA 5505 which works perfectly, users from outside can access my internal LAN. Now what i want, Is to create another VPN Tunnel group with another set of IP in which i want to allow them access to one server inside our LAN. See below details of network. [code]
View 1 Replies
View Related
May 13, 2011
1. how do I nat a public address to a dmz address.
2. how do I open port 80/443 in the public to this address?
View 1 Replies
View Related
Sep 7, 2011
I have a ASA5505 that I need to allow IPSEC and SSL VPNs through. The ASA is connecting to a BT Business ADSL router, what address should I be using on the ASA outside interface that will allow the ASA to be reachable from the Internet?
View 1 Replies
View Related
Jan 16, 2013
We have 2 IP blocks from my ISP. We have been using just one a /30 block with one IP address used on the outside interface of the device. The new block is a /29 range and I would need to use just two of those IP addresses. Here is the situation I am facing.A company we partnered with wants to set up a VPN, they will send us 2 Cisco 861s to put behind our ASA. Is it possible to assign these 861's with public IPs from the block that we are not currently using? (the /29 range)? I know that it might require an upgrade to the Security Plus.
View 7 Replies
View Related
Jul 19, 2012
We have ciso asa 5505 and we are using one public ip of 155.155.155.9 , so i wanna disable to ping from outside this ip , but not effect our site to site and remote vpn connections ,the only thing i need is to disable the public ip to ping from outside.
View 7 Replies
View Related
