I have two separate wireless networks in my house, one of them is for sharing my NAS data and the other is for Internet.problem is when I connect to the NAS network and after that I change my network to the other network, I can not connect to the internet ( I can connect to the wireless).
Just after restarting I can see the Internet
I have verizon fios internet and a wireless home network with verizon internet security and I want to ghange my IP adress on my laptop
View 6 Replies View RelatedAfter changing these NIC settings I am no longer able to connect to the internet:
checksum offload -> disabled
speed/duplex -> 100 mbps full
I tried setting it back to what it was before to no avail:
checksum offload -> Rx and Tx Enabled
Speed/Duplex -> Auto Negotiation
I'm still able to ping URLs and IPs, but cant get to any websites or even the modem page. I tried rebooting,power cycling...nothing works so far.
I had a disaster occur on my "guest" OS within VMware-Player. I had to start over from scratch! I am back in business, except for having the virtual machine recognized by my existing wireless network. The other two computers still communicate.I went through the wireless setup routine for the new VM. A new "ID" was assigned. Obviously, this is different from the one currently in use on the network. I have the settings info on a flash drive. Can I simply insert the FD in the other two computers and have the new ID replace the existing one?
View 14 Replies View RelatedI'm trying to get and change my password to wireless network to hook up my table pc I just got
View 1 Replies View RelatedWe recently switched from cable internet to Verizon DSL since my roommate moved out and took his equipment with him. I set up the wireless router last week and got my laptop to work on the wireless connection. Now I am unable to get my boyfriend's computer to connect to it, when it never had this issue before with the previous wireless. The first day I had it set up, it said it connected, with an "excellent" connection strength, but then the status was 'unable to connect.' I was on the phone with the Verizon guy, who after doing a screen share, said it was my IP address.
So I tried resetting my IP through the CMD, with no luck. Now it doesn't even let me connect to the wireless at all. I've tried both the Intel PROSet/Wireless and the Microsoft client to connect (this is running Windows XP) and when I click 'repair' on the Microsoft client, it tells me it couldn't be corrected because it could not renew the IP address. The firewall is currently off and I removed the defunct McAfee that was never renewed anyway[CODE]
How do I change the password from the default for the internet?
View 1 Replies View RelatedI used BT previously without any problems but now use Orange and now using the Internet downstairs is useless(weird flat configuration). The router is upstairs, next to TV(same location as the BT router). I dont know why the wireless Internet signal has become very weak. The only way I can use the Internet if I sit a few feet from the router. Even then, streaming videos on youtube still takes a while compared to BT. This affects all devices using wireless connection - even my Iphone is useless when used downstairs.
Signal interferance/ hacking? Router? Wireless adapter is up to date.
I am trying to add the E3000 to my existing network to provide Wireless Connectivity for my users. The main router is a RouteFinder SOHO VPN (RF560). The RouteFinder acts as a gateway and provides DHCP. I do not want to change it's role or settings. When I added the E3000 using a Lan-to-Lan connection to the RouteFinder, all users lost access to the internet. As a quick fix as I was working on something else at the time, I just unplugged the E3000. Now I am reading through Article 3733 that I was originally referred to and that has me changing the settings on the RouteFinder which I do not want to do. Is there any way to accomplish adding this to my network without changing anything on the RouteFinder at all??? By the way...I am located in another state than this router and network. I can call and have someone plug and unplug stuff but all of the configuration has to be done remotely.
View 7 Replies View RelatedIf I have a wireless network set up with the Linksys E1000 using one internet provider and then change the internet provider service to someone else, do I have to reset up the network or is it simply a matter of connecting the new internet service to the router?
View 3 Replies View RelatedI tried changing my ip address using ipconfig / release. I tried to fix what I did using ipconfig /renew but it tells me no operations can be performed on local connection 5 while it's media is connected.
View 12 Replies View RelatedI tried changing the WEP to WPA because I recently found out our neighbors were stealing internet from us. However after doing all this changing around I used 192.168... And all that and was able to change the ssid and the passphrase but after doing so the Internet stopped working. We are able to connect but it says there's no service or limited connectivity so no web pages or anything loads. Now I can't get back to the router page by typing that 192.168. stuff because there's no Internet. Don't know what to do. This is my fathers ISP and it's not the greatest considering the location. I've tried unplugging the router and whatnot but that's not working either. I think we need to get back on the router page and fix something but it's not allowing us to since there's no Internet. Am I going to have to change back to a WEP.. I dont really want too. The router may need to be upgraded too because it's pretty ancient.
View 4 Replies View RelatedA router restart. I changed the wpa to wen so I could connect my ds to wifi.So far what I have done was restart the modem, it's a Cisco wag120n. This is a wireless so the moment I changed to wen, I lost connection. I then used a cable to connect to the modem and managed to change the settings in the router page 192.168.1.1 back to wpa but with no success connecting to the Internet. I then tried ressetting the modem and computer with no luck. I cut the power to the modem router and turned off computer for 5 minutes. I then turned the modem back til it was stable and then the computer, again with no luck. I then factory reset via the button manually and via the modem page but both ended up with the unable to connect to primary DNS server.
View 6 Replies View RelatedI am running a Netgear wireless N-300 router from my RoadRunner modem. I installed the network early last week to no problems. A few days ago the wireless devices wouldn't connect. They recognize the network, but will not connect to the internet. I have given them their own IPs with the router, and shut off DHCP...this didn't work. I've obviously tried to power cycle the router and modem....this didn't work. I can't seem to find a fix. My android devices connect to the network just fine, but otherwise if it isn't connected via wire, it won't work. I've also tried to connect things without the android devices connected just in case it was interference, and that didn't work.
View 2 Replies View RelatedMy lan ip is 192.168.1.10 an wireless is automatic plssend me the settings to get both together
View 1 Replies View RelatedI am connected to a static ip network. This network sets local ips to connected computers but general ip is the same: static ip of network. When i go to "whatismyipaddress", I can see this static ip. I want to change my ip address. I have no chance to use proxy server or router connection. Is there a way to change my ip address? (Because some sites ban ip address, ex:rapidshare etc. and I need to change my ip)
View 1 Replies View Related[CODE]My current problem is the internet just isnt working right. It is slow, choppy at times or doesnt load all items on a page. If it doesn load a page sometimes I click on the stop X, followed by refresh and the page pops right upSometimes if I dont get a complete page a refresh will fix it. It is just a pain to work with.There is an Network Connection icon in the right corner of the task bar. It is two small blue screens. It keeps changing from a red x, an exclamation point, and three blue balls or nothing. If I rest on the icon it flashes the status of the network:[CODE]
View 12 Replies View RelatedI've finally gone and done it. I phoned up aol and requested my MAC code.With my new ISP ( possibly ZEN ) if I keep my existing netgear router, can I keep my wireless connection settings the same i.e. network name, wep key etc.If, on the other hand I get Zen's router which is pre configured, I would need to set up the wireless again. Could I still use the same network name and wep key, or would I have to chose new ones.
View 3 Replies View Relatedwhat part of active directory can you change your bandwith for the network and monitor how much bandwith is being used.
View 4 Replies View Relatedi just hooked up a dlink router at home so i can use my laptop in different rooms. i have a desktop in one room and the internet works fine but when i hooked up the wireless router i can connect to the network but it says no internet access so i cannot get online my brother in law is really good with computers and i called him and tryed doing a bunch of different things like changing the web address and such but nothing will work.
View 4 Replies View RelatedThe problem is I can't connect to my router, It says "unable to connect to wireless network" . Been trying to 5 days now to fix this, Not getting anywhere.Laptop is, HP Pavilion g6 Notebook, My network wireless adaptor is realtek rtl8188ce 802.11b/g/n.
OS Version: Microsoft Windows 7 Home Premium , Service Pack 1, 64 bit
Processor: Pentium(R) CPU B950 @ 2.10GHz
RAM: 4.00GB
Graphics Card: Mobile Intel(R) HD Graphics Family
The only thing that will connect to my wireless network is internet explorer. I have tried Firefox and other programs I have that require internet and they will not connect.
View 1 Replies View RelatedI have a home ADSL2 Modem Router. I have 3 computers connected to this wireless network and also with Internet access. However, I have 1 notebook connected to the wireless network but saying No Internet access.
View 13 Replies View Relatedive recently bought a tcl internet enabled tv. I have tried connecting it to the wireless network and it keeps giving me an error that the "connection failed due to timeout".
View 5 Replies View RelatedOur ISP provider made our internet connection a dial up. Last time it automatically connects to internet without putting those username and password. So after they changed it only our server pc have internet. Others don't have. The technician from the isp provider keep telling that the switch(but he keeps telling us its a router dunno why) need to be configure but switches dont need to be configure right?
View 3 Replies View RelatedI recently set up my DIR-615 on my wireless netbook. Everything worked fine and I could get online. But then when I changed the password on the router, it bumped me off and now says Internet isn't available. My phone can connect to Internet but not my netbook anymore. When my netbook tries to troubleshoot it keeps saying "problems with router and adapter."
View 1 Replies View RelatedI have a Linksys E1200 wireless router and I am having problems connecting to the internet. I can connect when plugged in to the cable modem directly. I can connect to the wireless network, but there is no internet connection. I ran ipconfig release and renew. I think it may be a DNS problem, but I'm not sure.
View 7 Replies View RelatedI have forgotten my network security key to connect to wireless internet.
View 2 Replies View RelatedI have a list of servers that will be migrated from one subnet to another. Is there a script that can take my file that has the server name and the new IP address and modify the existing servers' network from the list? I want to place the script on the servers before I am ready to change subnets for preparation.
View 1 Replies View RelatedIm having some problems changing my admin password on my DCS920
I know the default login is Login: admin / Password: "blank"
So I go into maintence, and there's an option to change the password.
it lists:
old password
newpassword
confirm
So I leave the old password blank and type in my new password in the following 2 spaces. I click apply and a window pops up asking me to enter username and password. I just enter admin and leave the password blank. I hit ok, and everything seems to update ok. So i log out, and try to log back in.
A window pops up asking me for my password. I type in admin for my username, and my new password, and it wont work
I type leaving the username blank, and type in new password... WONT WORK
I type admin, and new password again.. WONT WORK
I try password with first letter capital.. WONT WORK
I try password with ALL CAPS... WONT WORK..
Basically it wont let me log in as admin anymore. I figure I may have typed the password wrong the first time so I reset the camera and try the process again.. SAME PROBLEM.
Am I doing something wrong in changing my password ?
I dont wanna leave my default admin login as admin/"blank" , but when I try and change the password, it wont let me log in again as admin.
I am a newbie regarding mobile IP.the meaning of the phrase "changing the link-layer point of attachment to the Internet, yet without changing its IP address".
View 1 Replies View Relatedwell i had the same problem because i got bored and i was like hmm i wonder if i can change my IP and i tried it and i had the same problem but when i did system restore it still did not work, now i have to get a new operateing system...
View 10 Replies View RelatedSince i installed windows 7 on my Samsung R530 notebook i am unable to connect to internet through built in network adopter. while on diagnos it appears that network adopter is not found or may be the driver not been installed?
View 1 Replies View Related