Changing Wireless Network Settings

Apr 4, 2011

I had a disaster occur on my "guest" OS within VMware-Player. I had to start over from scratch! I am back in business, except for having the virtual machine recognized by my existing wireless network. The other two computers still communicate.I went through the wireless setup routine for the new VM. A new "ID" was assigned. Obviously, this is different from the one currently in use on the network. I have the settings info on a flash drive. Can I simply insert the FD in the other two computers and have the new ID replace the existing one?

View 14 Replies


ADVERTISEMENT

D-Link Wireless Router Not Working After Changing Speed / Duplex Settings?

May 24, 2012

I have a broadband connection and recently I bought a new D-Link wireless router for accessing internet on my Android phone via Wi-Fi. Router model no. is N 150 DIR-524.After configuring it was working fine for a week or so and then one fine day internet stopped working on my PC and router LED for internet was not glowing as well. So I called my ISP and they changed my ethernet card settings (nVidia).They changed the 'Speed/duplex settings' from 'Auto Negotiation' to '10 Mb Half Duplex' and then the internet started working. During this they had disconnected my router. Once they were gone, I reset the router and connected it back. Since then it ain't working Internet works fine when the cable is plugged directly in the ethernet card but doesn't work when plugged via router. Router does everything right from opening the '192.168.0.1' page to saving the settings. But there's no internet access.

View 8 Replies View Related

Cisco Wireless :: AIR-LAP1242G / Apply Button Not Working When Changing AP Settings?

Apr 24, 2012

I am working on installing a new 2500 Controller with 2 AIR-LAP1242G's attached to it.  I have both registered and on the controller but I am having trouble moving one of them to a new IPS AP group that I created.  Furthermore, I noticed the default gateway is missing from the static ip settings and I am unable to add that as well.  When I add the default gateway and hit apply, the controller does nothing. Same thing for when I try to change my WIPS device to monitor mode. 

A couple other things that I noticed is that when I go to AP groups and try to remove the AP's from the default group, there is no remove button when you go inside the default group like  I see when i go into my IPS group.The AP's are on software ver 12.4(23c)JA3 Boot ver 12.4.13.0 and the controller is at 7.0.22.0I have already power cycled the controller and both AP's. 

View 1 Replies View Related

Router Settings Keep Changing?

Jun 15, 2011

Every so often (random amounts of time) my internet setting either on the router or pc change and then I it comes up with an error that my settings aren't the same as my router... I use a Orange Live box and windows 7. also when I want to sign into games for windows that sometime crashes the internet and on DOW2 and minecraft.

View 10 Replies View Related

Can't Connect To Internet After Changing NIC Settings

Feb 15, 2012

After changing these NIC settings I am no longer able to connect to the internet:

checksum offload -> disabled
speed/duplex -> 100 mbps full

I tried setting it back to what it was before to no avail:

checksum offload -> Rx and Tx Enabled
Speed/Duplex -> Auto Negotiation

I'm still able to ping URLs and IPs, but cant get to any websites or even the modem page. I tried rebooting,power cycling...nothing works so far.

View 2 Replies View Related

D-Link DCS-942L :: Changing Settings Remotely?

Apr 8, 2012

I need to change my DCS-942L camera settings remotely when I am not connected to my home wireless network.  When I am at home, I just type in the local IP address of the camera (192.168.0.100) into my browser to access the firmware.  How can I do the same when I am away from home and obviously not connected to the local WiFi?

View 1 Replies View Related

Broadband :: Changing Previous Owners Details And Settings?

Jun 17, 2011

bought a second hand laptop but all previous owners details are still in. they must have been on a dial-up network want to change to broadband,how? also need to sort out wifi.

View 1 Replies View Related

Download / Upload Speeds - Changing The Router Settings

Mar 6, 2011

I have a RCA modem from comcast high speed internet.Also have a Linksys Cisco Wireless-N Gigabit Router model # WRT310N V2. When I connect the internet directly into the computer, I get download speed up to 21.07 mbps and upload speed of 3.07. When I connect through the router download speed 1.31mbps and upload speed of 1.01.I have no clue how to make changes to the router.

View 19 Replies View Related

Ubuntu 10.04 / Changing IP Settings Automatically Based On Location?

May 30, 2013

I have an Ubuntu 10.04 and basically I would like to achieve this:When I am at home, switch the network to use static IP.When I am at the office, switch the network to use DHCP.

Is there a program to do this?Or is this something that should go inside an init script where if it is weekend or weekday from 7 pm to 7 am, then consider it a home. If it is home, then use static IP.?

View 5 Replies View Related

Linksys Wireless Router :: E1000 - Can't Access Router Settings After Changing To Static IP

Jun 26, 2012

I installed an IP camera, and had to change my E1000 router settings to a static IP address.  Now I can't access the router settings.  192.168.1.1 is still the default gateway, but it won't open in any browser.
 
I'm reluctant to do a reset because it took me quite a while to figure out how to get the IP camera and port forwarding working (it does!), and I'd hate to do it all again and come to the same place.  I'm not very good at this stuff, and it's a small miracle that I did it once.  

View 4 Replies View Related

D-Link DCS-942L :: Stuck On Saving When Changing Setup Settings

Jan 23, 2013

When I change a setup setting and click save settings, most of the time it gets stuck on the "saving..." notification window and eventually I get a "Internet Explorer cannot display the web page" notification.  However I have found that if I repeatedly try it eventually it will accept the change.  This never happens using the wizards only making manual changes.  I am running the camera with a Wi-Fi connection.  I am not sure this is a router or camera firmware bug (running V1.12)

View 4 Replies View Related

Changing Or Getting Password For Wireless Network?

Apr 20, 2012

I'm trying to get and change my password to wireless network to hook up my table pc I just got

View 1 Replies View Related

Cannot Connect To Internet After Changing Wireless Network?

Mar 26, 2012

I have two separate wireless networks in my house, one of them is for sharing my NAS data and the other is for Internet.problem is when I connect to the NAS network and after that I change my network to the other network, I can not connect to the internet ( I can connect to the wireless).
Just after restarting I can see the Internet

View 4 Replies View Related

Wireless Home Network With Verizon Internet Security - Changing IP Address?

Dec 24, 2011

I have verizon fios internet and a wireless home network with verizon internet security and I want to ghange my IP adress on my laptop

View 6 Replies View Related

Linksys Wireless Router :: E3000 Adding To Network Without Changing Anything On RouteFinder

Jan 5, 2012

I am trying to add the E3000 to my existing network to provide Wireless Connectivity for my users.  The main router is a RouteFinder SOHO VPN (RF560).  The RouteFinder acts as a gateway and provides DHCP.  I do not want to change it's role or settings.  When I added the E3000 using a Lan-to-Lan connection to the RouteFinder, all users lost access to the internet.  As a quick fix as I was working on something else at the time, I just unplugged the E3000.  Now I am reading through Article 3733 that I was originally referred to and that has me changing the settings on the RouteFinder which I do not want to do.  Is there any way to accomplish adding this to my network without changing anything on the RouteFinder at all???  By the way...I am located in another state than this router and network.  I can call and have someone plug and unplug stuff but all of the configuration has to be done remotely. 

View 7 Replies View Related

Can't Connect To Any Wireless Network Proxy Settings

Jun 11, 2012

I have a new Dell Inspiron 14Z (purchased in February), it has been running great until recently, the internet connection (wireless) completely stopped working.When I try to connect through Internet Explorer, it says Internet Explorer cannot display the webpage. I Diagnose Connection Problems, and this is what I get:"Windows could not automatically detect this network's proxy settings." On Chrome, I got a long list of things to do (check DNS settings, LAN Network, etc. have tried every and all checked/unchecked box they advise.) This error shows up:Error 105 (net:: ERR_NAME_NOT_RESOLVED): The server could not be found. However, I accidentally uninstalled Chrome trying to fix this problem, so Internet Explorer is all I have.It's been about 2-3 weeks with no internet. Have tried connecting to 5+ different networks (Home- AT&T U-verse, University of Texas Network, restaurants, etc)tried restarting my computer, setting my LAN settings back to normal, and it still won't work. Other computers work on all of the networks I've tried, it's just mine that wont. [code]

View 13 Replies View Related

Wireless Network Settings For WBR1310 Router

Jan 9, 2012

I want to setup my Brother HL-2170W printer for wireless operation. The setup requires the wireless network settings for my D-Link WBR1310 router.

View 4 Replies View Related

Wireless Network - List Of Devices And NAT Settings?

Jan 17, 2011

I recently added several devices to my wireless-g network: Xbox 360, an HTC Smart phone, and an old laptop my buddy gave me (in addition to the 2 desktops that were already on the network). Since doing this, I've had occasional buffering problems when streaming music or video, even when I'm only using 1 of the devices. I suspect that the Xbox (or maybe phone) is downloading updates in the background, even when it's turned off, and that is consuming bandwidth. Is there any way I can see a list of devices that are connected to the network and maybe even the amount of data being transmitted to/from each so I can find the culprit. when I play online, it says that my NAT settings are not open and that this makes it take longer to connect to other players. What are the risks involved in loosening the NAT restrictions?

View 1 Replies View Related

Finding Network Security Key From Wireless Settings?

Mar 12, 2011

where do i find my security key for my wireless setup

View 2 Replies View Related

Changed Password To Wireless Connection - Can't Do It In Laptops Network Settings

Jan 29, 2013

I changed my password to my wireless connection and now I can't change it in my laptops network settings

View 7 Replies View Related

Belkin F5D8236 Router - Wireless Network Settings Conflict?

Dec 20, 2012

I have a Belkin N Wireless Router Model F5D8236, which has served my laptop with wireless and my wifes desktop computer through a ethernet cable for the last year.Recently we had to move her computer to another room so I got a Usb Wireless adapterNow when I try to connect her desktop to the network it says the settings do not match, or when prompeted for the PSK, it says its wrong, even though I'm dead sure I put it in right.I've tried transferring a copy of the settings with a flash drive, I tried resetting the router a dozen times, and all the wp2 settings.The USB adapter works, because when I turn the security feature off on the router, suddenly it can connect to the network.

View 1 Replies View Related

Wireless :: Settings Saved On This Computer Do Not Match Requirements Of Network

Dec 3, 2011

We purchased a new monitor to the pc where the router is connected. Since then, my laptop does not connect to the internet. My network is on the list but it says "The settings saved on this computer for network do not match the requirements of the network" and the Connect button is not active.

View 1 Replies View Related

D-Link DIR-615 :: Transmission Rate Missing From Wireless Network Settings?

Feb 4, 2013

I have had a DIR-655 for years, and this is a treat - channeling everything from IPTV, to a fast fiber connection, transfers - no sweats.

Then I had to setup a router for a friend, and recommended the DIR-615.

Setup the router, and max it would connect with was 150mb - I changed the settings accordingly: auto channel scan channel width: auto 20/40mhz

So this "opened" up the 300mb speed - however only for 5 mins, then it falls down to 150mb.

My laptop (lenovo) connects to the dir-655 just fine at full speed, and this is also the machine I used for testing the dir-615.

It's ax Hx firmware, FW: 8.04

What I can conclude by using inssider, and xirrus wifi inspector is that it generates 2 channels - and then after 5mins of connectivity looses a channel, and then the speed drops.

I got a new router from the dealer, same issue. Then a friend of mine lent me an ancient dir-615, and interestingly enough this had the same configuration option of "Transmission rate" in the wireless settings page! Just like the dir-655. and also connects at 300mb...

View 5 Replies View Related

Changing IP Address In Static Network?

Jul 11, 2011

I am connected to a static ip network. This network sets local ips to connected computers but general ip is the same: static ip of network. When i go to "whatismyipaddress", I can see this static ip. I want to change my ip address. I have no chance to use proxy server or router connection. Is there a way to change my ip address? (Because some sites ban ip address, ex:rapidshare etc. and I need to change my ip)

View 1 Replies View Related

Network Connection Icons Keep Changing?

Feb 23, 2013

[CODE]My current problem is the internet just isnt working right. It is slow, choppy at times or doesnt load all items on a page. If it doesn load a page sometimes I click on the stop X, followed by refresh and the page pops right upSometimes if I dont get a complete page a refresh will fix it. It is just a pain to work with.There is an Network Connection icon in the right corner of the task bar. It is two small blue screens. It keeps changing from a red x, an exclamation point, and three blue balls or nothing. If I rest on the icon it flashes the status of the network:[CODE]

View 12 Replies View Related

Changing ISP Network / Router / Modem

Oct 21, 2011

I've finally gone and done it. I phoned up aol and requested my MAC code.With my new ISP ( possibly ZEN ) if I keep my existing netgear router, can I keep my wireless connection settings the same i.e. network name, wep key etc.If, on the other hand I get Zen's router which is pre configured, I would need to set up the wireless again. Could I still use the same network name and wep key, or would I have to chose new ones.

View 3 Replies View Related

Changing Bandwidth And Monitor How Much Used For Network

Feb 6, 2013

what part of active directory can you change your bandwith for the network and monitor how much bandwith is being used.

View 4 Replies View Related

Linksys Wireless Router :: E4200 Guest Network Advanced Settings?

Aug 7, 2011

I am interested to know if there is anywhere (even in the code) where i can play with the guest network settings? 

*. ability to change the default webpage login for guest network
*. Ability to set a lease time for guest network
*. Ability to use special characters in the password (@!$%)
 
is it even possible or an open source firmware is the way to go? 

View 2 Replies View Related

Wireless :: Network Settings Do Not Match With Wireless Router Setup

Dec 24, 2011

even though I have successfully added the network manually, using the same settings as my other laptop which has no trouble connecting. So now, the network appears in my "Connect to a wireless network" box, but whenever I try to connect, it says "Windows cannot connect to *name of network*" So when I troubleshoot the problems, it states "Check your wireless settings. Make sure your computer is in range of *Network* and that the network settings match the wireless router or access point settings." I KNOW it's in range because my other computer is connected properly right next to this one. So it must be a problem with my network settings. Though I don't see how that can be because my settings on both computers are exactly the same, but one's connected and one's not. Could the problem simply be that I haven't logged on to my router online to add this computer to the network?

View 3 Replies View Related

Linksys Wireless Router :: WRT54G - Cannot Print Network Settings (HP OfficeJet J3680)

Aug 29, 2011

I suddenly am unable to print the settings  on the My Network Settings. When I click on the print sign nothing happens - it does not register on my printer. I used to be able to do this. My router is WRT54G and my printer is HP Officejet J3680  All- in-One.

View 1 Replies View Related

Servers :: Changing Network Information Of Multiple Machines?

Sep 25, 2012

I have a list of servers that will be migrated from one subnet to another. Is there a script that can take my file that has the server name and the new IP address and modify the existing servers' network from the list? I want to place the script on the servers before I am ready to change subnets for preparation.

View 1 Replies View Related

D-Link DCS Network Camera :: 920 - Changing Admin Password?

May 16, 2010

Im having some problems changing my admin password on my DCS920

I know the default login is Login: admin / Password: "blank"

So I go into maintence, and there's an option to change the password.

it lists:

old password
newpassword
confirm

So I leave the old password blank and type in my new password in the following 2 spaces. I click apply and a window pops up asking me to enter username and password. I just enter admin and leave the password blank. I hit ok, and everything seems to update ok. So i log out, and try to log back in.

A window pops up asking me for my password. I type in admin for my username, and my new password, and it wont work

I type leaving the username blank, and type in new password... WONT WORK

I type admin, and new password again.. WONT WORK

I try password with first letter capital.. WONT WORK

I try password with ALL CAPS... WONT WORK..

Basically it wont let me log in as admin anymore. I figure I may have typed the password wrong the first time so I reset the camera and try the process again.. SAME PROBLEM.

Am I doing something wrong in changing my password ?

I dont wanna leave my default admin login as admin/"blank" , but when I try and change the password, it wont let me log in again as admin.

View 4 Replies View Related

Linksys Wireless Router :: E4200 - Acquiring Network Address In WAP / WAP2 Security Settings

Sep 11, 2011

I have E4200 with fixed ip 192.168.1.2, DHCP off connected through LAN ports to FIOS ActionTec as 192.168.1.1.  When connecting through wireless network off the E4200, I can obtain and connect fine under Guest network and WEP security, but for any other security setting, WPA, WPA2, Mixed mode, etc.  I get the message "Aquiring network address" forever, and I never get a connection.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved