We purchased a new monitor to the pc where the router is connected. Since then, my laptop does not connect to the internet. My network is on the list but it says "The settings saved on this computer for network do not match the requirements of the network" and the Connect button is not active.
View 1 RepliesI had a problem earlier today upgrading to a new N router. All PCs in the house connected wirelessly except my laptop which I got the message below.The settings saved on this computer for the network do not match the requirements of the network.
View 1 Replies View Relatedeven though I have successfully added the network manually, using the same settings as my other laptop which has no trouble connecting. So now, the network appears in my "Connect to a wireless network" box, but whenever I try to connect, it says "Windows cannot connect to *name of network*" So when I troubleshoot the problems, it states "Check your wireless settings. Make sure your computer is in range of *Network* and that the network settings match the wireless router or access point settings." I KNOW it's in range because my other computer is connected properly right next to this one. So it must be a problem with my network settings. Though I don't see how that can be because my settings on both computers are exactly the same, but one's connected and one's not. Could the problem simply be that I haven't logged on to my router online to add this computer to the network?
View 3 Replies View RelatedNo matter what I do, whenever I enter the Web Interface for my E4200, the page comes up in Russian (at least I think it is russian!!)! I have changed the language to English (by trial and error discovered it was the first option at the top of the pull-down list) many times and yes, selected save at the bottom of the Setup page. I get the message back "Your settings have been successfully saved".But next time I go in, it is back to either Russian or sometimes some other wierd script, and I have to reselect English.
View 2 Replies View RelatedI just got a DCS-930L camera. I was able to set the password (10 characters) and complete the setup. It then said I needed to update the firmware which I did and it successfully completed. I was able to access it through the mydlink web page but when I clicked on the advanced settings, it wouldn't log in. I tried running the setup from the CD but it said "There was a problem saving your settings. Click Next to try again." That never worked. I tried a hard reset, no luck.
View 3 Replies View RelatedSince the EA4500 automatically updates via the Cisco Connect Software, does a copy of the firmware file get saved to the local computer?
View 1 Replies View RelatedI have a Linksys WRT610N wireless system with WPA-PSK security and this works fine with several computers but now one computer detects the wireless security as WEP and can thus not connect to the router. I have tried to manually connect to the router with correct security WPA-Personal (TKIP) and correct password but then the computer says "settings saved on this computer for the network do not match the requirements of the network".How can I get the computer to detect the correct security? The computer is running Windows 7 home premium.
View 7 Replies View RelatedI have this that comes up when i go on the networking
View 2 Replies View RelatedWe have a Comcast business class cable modem with a static IP address. There are two devices hardwired to it; a server and a Linksys WRT610N, The server is hardwired to it with port forwarding set for ports 21, 80 and 5900. It works perfectly and can be reached as intended by the outside world but not by our own network. Our Linksys WRT610N is hardwired to the modem. All computers on the wireless network see each other and can access the internet perfectly. So all seems well enough. BUT, no computer on our network can reach our server. Using the domain name or VNC connections from inside our system results in time outs and no connection.
View 12 Replies View RelatedMy two devices access the 2.4 ghz wireless network fine on my EA4500.Both my devices, laptop and iPhone4, have N rated network cards. What do I need to use the 5.0 ghz wireless network on the EA4500?Can the iPhone4 use a 5.0 wireless network? When I try to add the 5.0 ghz Wi-Fi to my iPhone4, it cannot find the named but hidden SSID network??
View 2 Replies View Relatedthis note is from the 5508 controller config manual, does this apply to 1040 access points in a mesh network?
Note:The recommended power source for MAPs is either a power supply or power injector. PoE is not a recommended power source for MAPs.
i don't know how I have done this but I have managed to connect my partners laptop to my network list on my new Toshiba laptop (don't know if make or modal matters) this seemed to have appeared whilst uploading and fetching photo's with skydrive,how do I get him off my network list???
View 1 Replies View RelatedSometimes I need to login to server shared folder with different username and password than saved one in "manage network password" or "windows credentials" (windows 7). At that time, I have to delete the previous one in "managed network password", then open the shared folder with new username, again save the old once once it is done.Is there anyway I can just open with different usernames without deleting the saved one? Different users have different privileges in server. Similarly, how to delete temporarily network cached passwords without restarting? I tried net user * /delete but it doesn't work?
View 3 Replies View RelatedThis is happening to me to multiple computers on my domain. When it happens i can only log in as a local user or if I unplug the network cable, log in and then re-connect the networkThe time on all these machines is correct within at least 1 minute but still it's throwing off this error. When reading about this problem I see many fixes that all relate to how to sych the time on the PC.
View 1 Replies View RelatedMy toshiba tecra m2-s730, running windows xp, won't connect wirelessly to the internet. It finds my wireless network, but when i type in the network security key, it says it doesn't match the one on my router. All my other computers connect fine, and this one will connect when using an ethernet cable.
View 6 Replies View RelatedMy linksysBEFW11S4 router shows a NetWork Key of let's say "mister", when I try to connect a new laptop using this key it comes up with Invalid Key.
View 2 Replies View RelatedIs there a way to transfer all the 'saved' wireless networks from my current laptop to my new one? I go to many different offices and have probably about 50 wireless networks 'stored' on my laptop. Everytime I go back to that office it just automatically connects. I would hate to have to try and find all these passwords again. Is there a way to transfer all this to my new laptop?
View 6 Replies View RelatedI have 50 WAP connected to a WLC 5508. When I backup the config I don't see the custom settings I put in some WAP. Where are the WAP settings saved at ?
View 17 Replies View RelatedI just restored my computer (Windows XP) to factory settings and it won't connect to the internet. I'm running an ethernet connection. I tried to look up a solution online but nothing has worked. Also, Im sure its not an issue with the modem, because all the other computers in the office are connecting to the internet just fine. It's only this one computer?
View 5 Replies View Relatedhow to sending out the wireless network from computer A to computer B if we used a lan network to computer A
View 12 Replies View RelatedI had a disaster occur on my "guest" OS within VMware-Player. I had to start over from scratch! I am back in business, except for having the virtual machine recognized by my existing wireless network. The other two computers still communicate.I went through the wireless setup routine for the new VM. A new "ID" was assigned. Obviously, this is different from the one currently in use on the network. I have the settings info on a flash drive. Can I simply insert the FD in the other two computers and have the new ID replace the existing one?
View 14 Replies View RelatedI have a new Dell Inspiron 14Z (purchased in February), it has been running great until recently, the internet connection (wireless) completely stopped working.When I try to connect through Internet Explorer, it says Internet Explorer cannot display the webpage. I Diagnose Connection Problems, and this is what I get:"Windows could not automatically detect this network's proxy settings." On Chrome, I got a long list of things to do (check DNS settings, LAN Network, etc. have tried every and all checked/unchecked box they advise.) This error shows up:Error 105 (net:: ERR_NAME_NOT_RESOLVED): The server could not be found. However, I accidentally uninstalled Chrome trying to fix this problem, so Internet Explorer is all I have.It's been about 2-3 weeks with no internet. Have tried connecting to 5+ different networks (Home- AT&T U-verse, University of Texas Network, restaurants, etc)tried restarting my computer, setting my LAN settings back to normal, and it still won't work. Other computers work on all of the networks I've tried, it's just mine that wont. [code]
View 13 Replies View RelatedI want to setup my Brother HL-2170W printer for wireless operation. The setup requires the wireless network settings for my D-Link WBR1310 router.
View 4 Replies View RelatedI recently added several devices to my wireless-g network: Xbox 360, an HTC Smart phone, and an old laptop my buddy gave me (in addition to the 2 desktops that were already on the network). Since doing this, I've had occasional buffering problems when streaming music or video, even when I'm only using 1 of the devices. I suspect that the Xbox (or maybe phone) is downloading updates in the background, even when it's turned off, and that is consuming bandwidth. Is there any way I can see a list of devices that are connected to the network and maybe even the amount of data being transmitted to/from each so I can find the culprit. when I play online, it says that my NAT settings are not open and that this makes it take longer to connect to other players. What are the risks involved in loosening the NAT restrictions?
View 1 Replies View Relatedwhere do i find my security key for my wireless setup
View 2 Replies View Related I have many of these, many models and versions. I have a WRT54G v1, V1.1, V2....V8, I also have WRT54GS's WRT54GL's and others, Lots of other Linksys stuff, almost all of it in the Blue and Black boxes of varing sizes.I have a heck of a time when I reconfigure my network or the wife changes the furniture. I'd love a single document that lists the power specifications and adapter requirements for thens devices... I can't find them any where on the Linksys site. I Have looked and searched and nowhere can I find a consolidate list.
Any have a list of the DC power Specifications, Barrel sizes, and other stuff needed to buy a replacement Power adapter. This page url...lists a lot of information but does not list this critical information... I am amazed that Linksys does not have it listed some where here. Losing a wall wart should not be a reason to pull you hair out, just a simple purchase, If they don't want to stock them, then at least tell us what they are.
is there any issue in buying air-ap1142n-ek9 802.11A/G/N FIXED AUTO AP INT ANT and later on converting it into lightweight under the control of air-ct2504-15k9 2504 WIRELESS CONTROLLER WITH 15 AP LICENSES ?Are there any requirements on the SW of the WLC and the IOS of the AP? The reason of the choice is budget.
View 1 Replies View RelatedA couple of questions about the AP541N:
1. How to get these installed and working properly, especially in a clustered environment? I have read so many comments about slow performance, no performace, bad coverage, etc... They sound like the perfect product for my intended use if they actually work as advertised.
2. what is the installation requirements for multiple units? (What is the minimum/maximum distance between units? How many units are needed for a certain area?
My wife's laptop will disconnect from our ATT Netscape router/dsl modem. The error we get is that the "security types do not match" ultimately we have to reboot the router and then her laptop will connect for a while. (we do not have this problem with any other devices that use this wifi connection.
View 1 Replies View RelatedI changed my password to my wireless connection and now I can't change it in my laptops network settings
View 7 Replies View RelatedI have a Belkin N Wireless Router Model F5D8236, which has served my laptop with wireless and my wifes desktop computer through a ethernet cable for the last year.Recently we had to move her computer to another room so I got a Usb Wireless adapterNow when I try to connect her desktop to the network it says the settings do not match, or when prompeted for the PSK, it says its wrong, even though I'm dead sure I put it in right.I've tried transferring a copy of the settings with a flash drive, I tried resetting the router a dozen times, and all the wp2 settings.The USB adapter works, because when I turn the security feature off on the router, suddenly it can connect to the network.
View 1 Replies View RelatedI have had a DIR-655 for years, and this is a treat - channeling everything from IPTV, to a fast fiber connection, transfers - no sweats.
Then I had to setup a router for a friend, and recommended the DIR-615.
Setup the router, and max it would connect with was 150mb - I changed the settings accordingly: auto channel scan channel width: auto 20/40mhz
So this "opened" up the 300mb speed - however only for 5 mins, then it falls down to 150mb.
My laptop (lenovo) connects to the dir-655 just fine at full speed, and this is also the machine I used for testing the dir-615.
It's ax Hx firmware, FW: 8.04
What I can conclude by using inssider, and xirrus wifi inspector is that it generates 2 channels - and then after 5mins of connectivity looses a channel, and then the speed drops.
I got a new router from the dealer, same issue. Then a friend of mine lent me an ancient dir-615, and interestingly enough this had the same configuration option of "Transmission rate" in the wireless settings page! Just like the dir-655. and also connects at 300mb...
I just reinstalled windows and am trying to restore my previous settings. I was wondering how to do that, specifically with the bookmarks.I originally saved my bookmarks with an export, and I have the saved file.I cannot seem to get my bookmarks back. I have tried all of the options.I am using the internet browser, google chrome.
View 2 Replies View Related