Wireless Network Settings For WBR1310 Router
Jan 9, 2012I want to setup my Brother HL-2170W printer for wireless operation. The setup requires the wireless network settings for my D-Link WBR1310 router.
View 4 Replies
ADVERTISEMENT
Connect Linksys WRT160N And Dlink WBR1310 Wirelessly?
Feb 13, 2011I have 2 routers and hate wires! The main router connected to the internet is the Linksys WRT 160N which runs the bulk of the wireless devices in my house. I just got bought a new computer which is in a different room and do not want to run a 100' wire to reach the area... I have a extra router kicking around the Dlink WBR-1310 and I want to connect the two routers in two different rooms, wireless.
View 2 Replies View RelatedBelkin F5D8236 Router - Wireless Network Settings Conflict?
Dec 20, 2012I have a Belkin N Wireless Router Model F5D8236, which has served my laptop with wireless and my wifes desktop computer through a ethernet cable for the last year.Recently we had to move her computer to another room so I got a Usb Wireless adapterNow when I try to connect her desktop to the network it says the settings do not match, or when prompeted for the PSK, it says its wrong, even though I'm dead sure I put it in right.I've tried transferring a copy of the settings with a flash drive, I tried resetting the router a dozen times, and all the wp2 settings.The USB adapter works, because when I turn the security feature off on the router, suddenly it can connect to the network.
View 1 Replies View RelatedLinksys Wireless Router :: E4200 Guest Network Advanced Settings?
Aug 7, 2011I am interested to know if there is anywhere (even in the code) where i can play with the guest network settings?
*. ability to change the default webpage login for guest network
*. Ability to set a lease time for guest network
*. Ability to use special characters in the password (@!$%)
is it even possible or an open source firmware is the way to go?
Linksys Wireless Router :: WRT54G - Cannot Print Network Settings (HP OfficeJet J3680)
Aug 29, 2011I suddenly am unable to print the settings on the My Network Settings. When I click on the print sign nothing happens - it does not register on my printer. I used to be able to do this. My router is WRT54G and my printer is HP Officejet J3680 All- in-One.
View 1 Replies View RelatedWireless :: Network Settings Do Not Match With Wireless Router Setup
Dec 24, 2011even though I have successfully added the network manually, using the same settings as my other laptop which has no trouble connecting. So now, the network appears in my "Connect to a wireless network" box, but whenever I try to connect, it says "Windows cannot connect to *name of network*" So when I troubleshoot the problems, it states "Check your wireless settings. Make sure your computer is in range of *Network* and that the network settings match the wireless router or access point settings." I KNOW it's in range because my other computer is connected properly right next to this one. So it must be a problem with my network settings. Though I don't see how that can be because my settings on both computers are exactly the same, but one's connected and one's not. Could the problem simply be that I haven't logged on to my router online to add this computer to the network?
View 3 Replies View RelatedLinksys Wireless Router :: E4200 - Acquiring Network Address In WAP / WAP2 Security Settings
Sep 11, 2011I have E4200 with fixed ip 192.168.1.2, DHCP off connected through LAN ports to FIOS ActionTec as 192.168.1.1. When connecting through wireless network off the E4200, I can obtain and connect fine under Guest network and WEP security, but for any other security setting, WPA, WPA2, Mixed mode, etc. I get the message "Aquiring network address" forever, and I never get a connection.
View 1 Replies View RelatedLinsky Router - Change Network Settings?
Feb 5, 2011When I set up my Linsky's Router,I set it up for 2 old computers (I can do 3 on it.) I bought a new laptop & added that. I no longer own the 2 older computers and would like to remove them & add my sisters laptop + the newer laptop she gave my little girl. I would also like to change it so that it is password protected instead of closed so that family & friends who visit may get online as well.
View 3 Replies View RelatedRouter Or Modem Settings - No Computer On Network Can Reach Server
Feb 26, 2013We have a Comcast business class cable modem with a static IP address. There are two devices hardwired to it; a server and a Linksys WRT610N, The server is hardwired to it with port forwarding set for ports 21, 80 and 5900. It works perfectly and can be reached as intended by the outside world but not by our own network. Our Linksys WRT610N is hardwired to the modem. All computers on the wireless network see each other and can access the internet perfectly. So all seems well enough. BUT, no computer on our network can reach our server. Using the domain name or VNC connections from inside our system results in time outs and no connection.
View 12 Replies View RelatedHome Network :: WRT54G - Router Loses Its Settings Regularly
Jun 8, 2011It's about a Linksys WRT54G with Firmware: DD-WRT v23 SP2 (09/15/06) std it started resetting it's admin panel settings once every few months, lately it does that every few days, like name of LAN network, name encryption and password of the wireless AP, IP filter setting and so on
View 5 Replies View RelatedChanging Wireless Network Settings
Apr 4, 2011I had a disaster occur on my "guest" OS within VMware-Player. I had to start over from scratch! I am back in business, except for having the virtual machine recognized by my existing wireless network. The other two computers still communicate.I went through the wireless setup routine for the new VM. A new "ID" was assigned. Obviously, this is different from the one currently in use on the network. I have the settings info on a flash drive. Can I simply insert the FD in the other two computers and have the new ID replace the existing one?
View 14 Replies View RelatedCan't Connect To Any Wireless Network Proxy Settings
Jun 11, 2012I have a new Dell Inspiron 14Z (purchased in February), it has been running great until recently, the internet connection (wireless) completely stopped working.When I try to connect through Internet Explorer, it says Internet Explorer cannot display the webpage. I Diagnose Connection Problems, and this is what I get:"Windows could not automatically detect this network's proxy settings." On Chrome, I got a long list of things to do (check DNS settings, LAN Network, etc. have tried every and all checked/unchecked box they advise.) This error shows up:Error 105 (net:: ERR_NAME_NOT_RESOLVED): The server could not be found. However, I accidentally uninstalled Chrome trying to fix this problem, so Internet Explorer is all I have.It's been about 2-3 weeks with no internet. Have tried connecting to 5+ different networks (Home- AT&T U-verse, University of Texas Network, restaurants, etc)tried restarting my computer, setting my LAN settings back to normal, and it still won't work. Other computers work on all of the networks I've tried, it's just mine that wont. [code]
View 13 Replies View RelatedWireless Network - List Of Devices And NAT Settings?
Jan 17, 2011I recently added several devices to my wireless-g network: Xbox 360, an HTC Smart phone, and an old laptop my buddy gave me (in addition to the 2 desktops that were already on the network). Since doing this, I've had occasional buffering problems when streaming music or video, even when I'm only using 1 of the devices. I suspect that the Xbox (or maybe phone) is downloading updates in the background, even when it's turned off, and that is consuming bandwidth. Is there any way I can see a list of devices that are connected to the network and maybe even the amount of data being transmitted to/from each so I can find the culprit. when I play online, it says that my NAT settings are not open and that this makes it take longer to connect to other players. What are the risks involved in loosening the NAT restrictions?
View 1 Replies View RelatedFinding Network Security Key From Wireless Settings?
Mar 12, 2011where do i find my security key for my wireless setup
View 2 Replies View RelatedChanged Password To Wireless Connection - Can't Do It In Laptops Network Settings
Jan 29, 2013I changed my password to my wireless connection and now I can't change it in my laptops network settings
View 7 Replies View RelatedWireless :: Settings Saved On This Computer Do Not Match Requirements Of Network
Dec 3, 2011We purchased a new monitor to the pc where the router is connected. Since then, my laptop does not connect to the internet. My network is on the list but it says "The settings saved on this computer for network do not match the requirements of the network" and the Connect button is not active.
View 1 Replies View RelatedD-Link DIR-615 :: Transmission Rate Missing From Wireless Network Settings?
Feb 4, 2013I have had a DIR-655 for years, and this is a treat - channeling everything from IPTV, to a fast fiber connection, transfers - no sweats.
Then I had to setup a router for a friend, and recommended the DIR-615.
Setup the router, and max it would connect with was 150mb - I changed the settings accordingly: auto channel scan channel width: auto 20/40mhz
So this "opened" up the 300mb speed - however only for 5 mins, then it falls down to 150mb.
My laptop (lenovo) connects to the dir-655 just fine at full speed, and this is also the machine I used for testing the dir-615.
It's ax Hx firmware, FW: 8.04
What I can conclude by using inssider, and xirrus wifi inspector is that it generates 2 channels - and then after 5mins of connectivity looses a channel, and then the speed drops.
I got a new router from the dealer, same issue. Then a friend of mine lent me an ancient dir-615, and interestingly enough this had the same configuration option of "Transmission rate" in the wireless settings page! Just like the dir-655. and also connects at 300mb...
Sharing :: Change Network Settings So Internet Connection Appeared As Public Network
Jan 25, 2011I use my desktop for streaming media throughout the house. I found it was causing lag for gaming most likely because it was taking up all the bandwidth for the router. We had a 2nd router laying around as well as a 2nd wireless adapter so we set up a 2nd network that was not connected to the internet for strictly media streaming.I attempted to change the network settings so the internet connection appeared as a public network so that streaming of media was hopefully diverted to the non internet wireless adapter.I want a faster way of transferring large video files from my laptop to my desktop. I recently bought a crossover cable to do this through direct connection.Both use the same user name and password as well as run the same win 7 pro however the desktop is the 64 bit version. I set up both ipv4 with the same addresses.When it has worked I am only getting a connection speed of just over 10mb and once I connect the crossover cable between the computers it knocks out my internet connection on the wireless card.
View 5 Replies View RelatedLinksys Wireless Router :: E1000 - Can't Access Router Settings After Changing To Static IP
Jun 26, 2012I installed an IP camera, and had to change my E1000 router settings to a static IP address. Now I can't access the router settings. 192.168.1.1 is still the default gateway, but it won't open in any browser.
I'm reluctant to do a reset because it took me quite a while to figure out how to get the IP camera and port forwarding working (it does!), and I'd hate to do it all again and come to the same place. I'm not very good at this stuff, and it's a small miracle that I did it once.
Linksys Wireless Router :: E3000 - Can't Connect To Router Settings Page
Dec 25, 2012When I try to go to192.168.1.1 it says connection interrupted. If i use the Cisco Connect it tells me i am not connected to the internet. My pc is connected via ethernet cable. My son can pull it up on is laptop and is connect the our Linksys E3000 wirelessly. I can go online, I just cant get to the router.
View 9 Replies View RelatedCannot Access Wireless Router Settings?
Mar 5, 2013I can't get into my router's settings, when I try, chrome says the page is not available. I checked, the IP is correct, and I can't access it on multiple computersI recently changed a few setting. (I set it to max 300 mbs per second from 54, and one other thing that I don't recall) The problem occurs on three different computers(A mac and two PCs) I've restarted my router several times to no avail. What should I do?
View 1 Replies View RelatedBalking Wireless G Router Do Not Maintain Settings
May 14, 2012I have a Belkin Wireless G Router. Whenever I set up a wireless password and network name, within a few hours, the router resets its self to its factory settings. The router will not let me maintain a secure network because of this. How do I make it so that all the settings that I set will stick?
View 2 Replies View RelatedNetgear WNDR3400 Wireless Router Settings?
Aug 21, 2011My 7 month old Netgear wireless router suddenly stopped working
The router's power light will not remain on after powering it up. The only lights that remain on after power-up are the (4) "LAN Port" lights (solid green) and the "Internet" light (solid amber).
The owner's manual states that it's a hardware problem if the power light does not remain on and to call tech support. The tech I spoke too said it's a settings issue that they deal with everyday and not a hardware problem.
One of the things I've tried was using a paper clip to reset the router to it's factory settings. It didn't change anything though. Re-running the setup CD didn't yield any results either. It just stopped in the middle because it said there was no ethernet cable connecting the laptop to the router, even though there was.
By the way... My ISP is Century Link and I use an Actiontec DSL Modem.
Not sure how to modify the router's settings if the network is down.
Tp-link Wireless Router Security Settings?
Sep 12, 2012I forgot my router security code number but still working i want to need make new secure
View 1 Replies View RelatedLinksys Wireless Router :: E4200 Can't Log-Out Settings 192.168.1.1
Mar 26, 2012I have a E4200 router v.01 and when i updated the latest firmware (due to security exploit) it seems that whenever i acess the router settings (192.168.1.1) it doesn't ask me nor to input the admin and the password anymore, using wifi or wired.. I want the usual proccess whenever i go to 192.168.1.1 it will ask me to input my admin and password to change my router settings..
View 4 Replies View RelatedIP Settings For ADSL Modem To Switch To Wireless Router?
Feb 5, 2012I've a Shiro DSL805E Modem and to connect to multiple computers, I connected an Encore 5 Port Switch. Now I got laptop and thought of getting a wireless network, so I bought TP-Link TL-MR3420 Wireless Router and connected it to the one of the wires from the Encore Switch. But I'm unable to access the internet through TP-Link Router but the internet works fine for the computers which are directly connected to switch. how to do ip settings for TP-Link Router. But when I connect router directly to modem by bypassing switch, it works fine but not via switch. I have some restrictions due to which I have to strictly following this sort of connection: Modem -Switch - Router
View 1 Replies View RelatedChange Security Settings On DLink Wireless Router?
Jan 16, 2012how to change security settings so my kids can go online on their nintendo ds lite. we have d link router. 192.168.0.1
View 1 Replies View RelatedAsus Rt-n66u Wireless Router Settings For Gaming?
Jul 22, 2012I have recently purchased an asus rt-n66u dual band gigabit router. What are the best settings for wireless gaming? The wireless adaptor I'm using is an asus usb-n53 dual band. Do I need to set it for auto mode or n only? and 20 or 40 mhz or 20/40 combined? do I need aes/tkip encryption or just aes?
View 5 Replies View RelatedLinksys Wireless Router :: Wrt54gs V7.2 - Can't Access Settings
Jul 8, 2011I changed the router's IP to 192.168.2.1 due to the same situation as this [URL] linksys and now I can't access my settings I have tried the both pips and nothing and I can't seem to get my linksys wrt54gs v7.2 to let two computers be on the internet at the same time both can be on the network but on one on the internet
View 6 Replies View RelatedLinksys Wireless Router :: Getting E2500 Advanced Settings?
Jan 14, 2012A few months ago I purchased an e2500 Cisco Linksys router to use in my home. This past Christmas, my family got about 4 new wifi devices which they added to the network bringing the total number of devices on my home network to 10. I wanted to know if there are any advanced settings in Cisco Connect that I can tweak to make my wifi speeds faster because right now I'm getting about 55 Mbps on most of my devices. I was also wondering what the typical range of the e2500 router was and if the e4200 offers a large improvement.
View 3 Replies View RelatedLinksys Wireless Router :: E4200 - Advanced Settings Tab?
May 9, 2011Manually type http://192.168.1.1/Wireless_Advanced.asp and the Advanced Wireless Settings tab appears! (I found this info in dd-wrt forum). A lot more settings to play with here, including transmission power for both 5GHz and 2.4GHz.
View 3 Replies View RelatedLinksys Wireless Router :: How To Configure Settings For E4200
Jun 28, 2012How to configure settings for E4200
View 1 Replies View RelatedLinksys Wireless Router :: Settings For Connecting WRT54GH With Another One?
Feb 18, 2012I have linksys WRT54GH wireless router with me.I want to know how can i connect it with any other wireless router. What settings do i need to change.
View 1 Replies View Related