Wireless Network - List Of Devices And NAT Settings?
Jan 17, 2011
I recently added several devices to my wireless-g network: Xbox 360, an HTC Smart phone, and an old laptop my buddy gave me (in addition to the 2 desktops that were already on the network). Since doing this, I've had occasional buffering problems when streaming music or video, even when I'm only using 1 of the devices. I suspect that the Xbox (or maybe phone) is downloading updates in the background, even when it's turned off, and that is consuming bandwidth. Is there any way I can see a list of devices that are connected to the network and maybe even the amount of data being transmitted to/from each so I can find the culprit. when I play online, it says that my NAT settings are not open and that this makes it take longer to connect to other players. What are the risks involved in loosening the NAT restrictions?
View 1 Replies
ADVERTISEMENT
Aug 31, 2012
Where can I find a log or list of devices that attempted to access my EA4500 wireless network?I am using the cloud services to monitor my EA4500 usage in an apartment environment.
View 1 Replies
View Related
Mar 1, 2012
I recently change routers to a Linksys E3000 wireless router from a Uverese 2wire residential gateway and all worked well for a short time nothing changed however when I go to view network devices from Win7,Vista or XP computers the network devices are no longer there. when I shut down and reboot the router and switches I still cannot see these devices, however when I hook up my old 2wire router I see my devices again. Even when I reconnect to the E3000 all the devices can be viewed for a few hours. Changing routers resets something but maybe overloads the linksys E3000 after a few hours? maybe this E3000 is just defective?
When I view a network map in Network & Internet all the devices appear in the map The configuration is Linksys E3000 router with two (2) 8 port Trendnet gigabyte switches and One (1) 8 port Trendnet Poe 10/100 switch. They are chained router to 8 port gig to 8 port gig to 8 port Poe 10/100. Prior to this I had the router to each switch separately - - this does not seem to matter works the same either way
Devices attached - Network printer,XP desktop, Vista Desktop, NAS, WDTVlive media player, Roku, Home automation controller, IP touch screen for the automation, security DVR (wireless devices are all ok Win7 laptop, Vista laptop, Ipad)seldom are more than 3 devices being used at one time light traffic.)
View 2 Replies
View Related
Apr 30, 2013
I have an EA6500 and have three AppleTV... all three generations.l I also have a DirecTV Genie and DirecTV HD-DVR that, together, provide whole-house viewing. When I first setup the EA6400 based network, all three AppleTVs were listed and my whole-house viewing worked. This past Saturday, however, that changed, when I couldn't see the programs recorded on the HD-DVR, from the Genie. My troubleshooting determined one of the AppleTVs had been assigned the same address as the HD-DVR upstairs and that the HD-DVR wasn't listed as being connected. Once I reset everything, the IPs resolved and the whole-house viewing was resolved, however, none of the AppleTVs are listed as connected, even though they are. I can check the connections by the AppleTV device and see that they do, indeed, have an IP address, and I can view material from the iTunes cloud or stored on another PC in the local network. I reset everything again, but to no avail. No AppleTV devies show as connected from Smart Wi-Fi. The AppeTVs are all wired to the LAN... not wireless.
So, the question is, is there a fix to get AppleTV devices to list? All of my devices and router have the lastest firmware. BTW, I had a WRT610N, which I'm now useing as an access point, didn't have this issue.
View 9 Replies
View Related
Apr 26, 2011
I just got a DIR-655 and set it all up pretty easily. I have 6 wired and 3 wireless. All work fine and all are set to use DHCP. But if I go (in the router) to the Lan Computers list under Device Info, three devices (2 wired, 1 wireless) do not appear. I do have a switch added to the system, but of the three devices connected to it, 1 shows in th Lan Computers list and the other 2 do not.Since everything works, I'm mostly just curious why this is. Every previous router I've had showed everything correctly.
View 3 Replies
View Related
Nov 29, 2011
which current SB routers support these features known from RVL200 and RV0XX v. 1.X?:
Block MAC address on the list with wrong IP address
Block MAC address not on the list
View 1 Replies
View Related
Mar 19, 2012
Where can I find a list of supported external HDDs or NAS devices for a Cisco 857w router?
View 2 Replies
View Related
May 16, 2012
Sonicwall TZ 180 router/firewall LAN and WLAN is configured on different subnets (just the way it is setup) and any devices on either network can not see shares/printers etc on the other network through the same device.from what i can tell, i have all the necessary port forwards/AccessRules setup for WLAN and LAN to communicate together but, it is just not working properly. What the exact settings are to ensure the LAN and WLAN devices communicate to each other.
View 1 Replies
View Related
Jul 11, 2012
i can't find my wireless network in the list. It shows me networks from my are but not my one. I know my one works and has no problem as my sister can use her laptop wirelessly
View 19 Replies
View Related
Jan 31, 2011
When I click on to my wireless network list nothing shows up, but I use my work pc and about 20 networks show up. What is going on with my lap top.
View 1 Replies
View Related
Dec 13, 2011
I have new DIR-615 D-link router. Since we installed it the network has disappeared randomly off the available networks list, and when I try and open Google Chrome it says there's DNS error. Troubleshooting through windows networks doesn't work because it can't find any problems since my network doesn't even show up on the list. We've even done a factory reset and the problem persists, and it does this about once a day. Resetting the router temporarily fixes the problem. This problem is happening on all 3 laptops in our home, two of which run windows 7 and one which runs XP.
View 1 Replies
View Related
Nov 17, 2011
When I'm home I can get online but it's slow webstar. I used to be able to get online at the local McDonalds with free wi-fi, real fast. Now, the connection list doesn't show the "FREE McDonalds" connection.
I have: Atheros AR5B97 Wireless Network Adapter, Windows 7 on ACER Aspire 7741z-4815. It has been updating until recently, don't know if it's because I haven't been online as often or what.
View 1 Replies
View Related
Jun 24, 2012
I've recently purchased a Linksys EA4500 router. I've got home, I've used the installation guide CD thingy, connected 3 of my laptops wirelessly, no issue there.However when I tried to connect my 4th laptop problems came along. The problem I was dealing with was that I couldn't connect to the router. I mean I could see the network name appearing in the list, but when I tried to connect the network would just dissapear from the list, not connect, and wouldn't back on the list unless I've reset the laptop. Anyhow I've ignored that computer because I thought it was two years old and it might have had a wireless network adaptor issue, although it was conneting with no problem to my former router D-Link DIR 365.Anyway, just yesterday I've purchesed a brand new netbook (Evolio U9) and it doesn't see my router, although it sees all the other connection availables (my neighbors' wirless networks), I even connected to one of them just to test if anything was wrong with the netbook.
I also have problems when trying to connect with an Iphone 4. Well, it does connect, but the connection to the iphone just goes on and off making it impossible to use. It's really strange that all the 3 Iphones in my home have no issue connecting, not even my Glaxy S3, nor any of the Smart Tvs, nor the printer.Does the router have any number of limited connections available? The router configuration is the ones done from the CD. I've only assign a SSID and a WPA password.Please note that all the computers above are GENIUNE Windows
View 9 Replies
View Related
Dec 8, 2012
I just acquired a used E2100 from an auction, when I plug it in I see an "Unnamed Network" with full bars in wireless, but can't connect since I don't know the ssid/password.When connecting with cable, with ipconfig I get a 10.10.10.108 ip, the gateway is at 10.10.10.99. Yet I also cannot access it.I have tried the reset button at the bottom, holding it for over a minute, pressing it quickly, holding it for 30 seconds, holding it and unplugging + replugging the router, but nothing is working.I have also tried the CD that comes with it with cable and with wifi only, but it does not find the router. I have deleted my default wireless network settings, had my wifi on, was not connected to any networks, yet the CD could not find the router.When router is on, the WIFI led blinks around once a second, while the LAN led blinks randomly like it should.
View 3 Replies
View Related
Jul 3, 2012
I've got an E4200v1 running 1.0.04 firmware with guest access enabled. I'd like to find out who is logged in using the guest access. Is there a way to get a list of the DHCP clients on the guest network? I'm able to do this for the non-guest access via the WEB interface's Status->Local Network->DHCP Clients Table page. But I can't find a similar table for the guest network.
View 3 Replies
View Related
May 6, 2012
I am talking about my notebook. My wireless network disappeared. I can search other networks but the router I have been using was suddenly not able to be searched
View 3 Replies
View Related
Apr 4, 2011
I had a disaster occur on my "guest" OS within VMware-Player. I had to start over from scratch! I am back in business, except for having the virtual machine recognized by my existing wireless network. The other two computers still communicate.I went through the wireless setup routine for the new VM. A new "ID" was assigned. Obviously, this is different from the one currently in use on the network. I have the settings info on a flash drive. Can I simply insert the FD in the other two computers and have the new ID replace the existing one?
View 14 Replies
View Related
Jun 11, 2012
I have a new Dell Inspiron 14Z (purchased in February), it has been running great until recently, the internet connection (wireless) completely stopped working.When I try to connect through Internet Explorer, it says Internet Explorer cannot display the webpage. I Diagnose Connection Problems, and this is what I get:"Windows could not automatically detect this network's proxy settings." On Chrome, I got a long list of things to do (check DNS settings, LAN Network, etc. have tried every and all checked/unchecked box they advise.) This error shows up:Error 105 (net:: ERR_NAME_NOT_RESOLVED): The server could not be found. However, I accidentally uninstalled Chrome trying to fix this problem, so Internet Explorer is all I have.It's been about 2-3 weeks with no internet. Have tried connecting to 5+ different networks (Home- AT&T U-verse, University of Texas Network, restaurants, etc)tried restarting my computer, setting my LAN settings back to normal, and it still won't work. Other computers work on all of the networks I've tried, it's just mine that wont. [code]
View 13 Replies
View Related
Jan 9, 2012
I want to setup my Brother HL-2170W printer for wireless operation. The setup requires the wireless network settings for my D-Link WBR1310 router.
View 4 Replies
View Related
Mar 12, 2011
where do i find my security key for my wireless setup
View 2 Replies
View Related
Jan 29, 2013
I changed my password to my wireless connection and now I can't change it in my laptops network settings
View 7 Replies
View Related
Dec 20, 2012
I have a Belkin N Wireless Router Model F5D8236, which has served my laptop with wireless and my wifes desktop computer through a ethernet cable for the last year.Recently we had to move her computer to another room so I got a Usb Wireless adapterNow when I try to connect her desktop to the network it says the settings do not match, or when prompeted for the PSK, it says its wrong, even though I'm dead sure I put it in right.I've tried transferring a copy of the settings with a flash drive, I tried resetting the router a dozen times, and all the wp2 settings.The USB adapter works, because when I turn the security feature off on the router, suddenly it can connect to the network.
View 1 Replies
View Related
Dec 3, 2011
We purchased a new monitor to the pc where the router is connected. Since then, my laptop does not connect to the internet. My network is on the list but it says "The settings saved on this computer for network do not match the requirements of the network" and the Connect button is not active.
View 1 Replies
View Related
Feb 4, 2013
I have had a DIR-655 for years, and this is a treat - channeling everything from IPTV, to a fast fiber connection, transfers - no sweats.
Then I had to setup a router for a friend, and recommended the DIR-615.
Setup the router, and max it would connect with was 150mb - I changed the settings accordingly: auto channel scan channel width: auto 20/40mhz
So this "opened" up the 300mb speed - however only for 5 mins, then it falls down to 150mb.
My laptop (lenovo) connects to the dir-655 just fine at full speed, and this is also the machine I used for testing the dir-615.
It's ax Hx firmware, FW: 8.04
What I can conclude by using inssider, and xirrus wifi inspector is that it generates 2 channels - and then after 5mins of connectivity looses a channel, and then the speed drops.
I got a new router from the dealer, same issue. Then a friend of mine lent me an ancient dir-615, and interestingly enough this had the same configuration option of "Transmission rate" in the wireless settings page! Just like the dir-655. and also connects at 300mb...
View 5 Replies
View Related
Aug 7, 2011
I am interested to know if there is anywhere (even in the code) where i can play with the guest network settings?
*. ability to change the default webpage login for guest network
*. Ability to set a lease time for guest network
*. Ability to use special characters in the password (@!$%)
is it even possible or an open source firmware is the way to go?
View 2 Replies
View Related
Dec 24, 2011
even though I have successfully added the network manually, using the same settings as my other laptop which has no trouble connecting. So now, the network appears in my "Connect to a wireless network" box, but whenever I try to connect, it says "Windows cannot connect to *name of network*" So when I troubleshoot the problems, it states "Check your wireless settings. Make sure your computer is in range of *Network* and that the network settings match the wireless router or access point settings." I KNOW it's in range because my other computer is connected properly right next to this one. So it must be a problem with my network settings. Though I don't see how that can be because my settings on both computers are exactly the same, but one's connected and one's not. Could the problem simply be that I haven't logged on to my router online to add this computer to the network?
View 3 Replies
View Related
Sep 11, 2012
I'm having constant lag spikes. I use DPC Latency checker [URL]On both my desktop (using PCI wifi card) and my laptop I have lag spikes. This is a screenshot of the spikes [URL]. Although it says its my hardware problems, I doubt its true, as it happens on both devices.
View 1 Replies
View Related
Sep 30, 2012
My laptop with Windows 7 64-bit is not being able to connect to the home wireless network. But other devises like iPad and iPhone and Mac laptop can connect to the same wireless network. However I can connect to the network if I connect my laptop directly to the wireless router using a network cable.I have tried upgrading the firmware in my wireless router but no luck. THis laptop had no problem before connecting to the same wireless network. But since I came back from the back home couple of days back I am seeing this problem. But my laptop can still connect to my my-fi devise wireless network. I have tried running the netsock commands listed in a similar thread in this forum but no luck.netsh winsock reset catalog netsh int ipv4 reset reset.log netsh int ipv6 reset reset.log
View 5 Replies
View Related
Aug 29, 2011
I suddenly am unable to print the settings on the My Network Settings. When I click on the print sign nothing happens - it does not register on my printer. I used to be able to do this. My router is WRT54G and my printer is HP Officejet J3680 All- in-One.
View 1 Replies
View Related
Aug 15, 2011
I have installed my new E4200 and it works beautifully. I have several wirelss adapters and a few wired connections through powerline adapters. I also have a second VPN router attached to the 4200.I can see the wireless connected devices with the associated IP addresses. If I plug a laptop directly into the Cisco, I can of course see it.However, I can see none of the devices attatched to the powerline devices? I have a securty cam connected via the powerline and want to know the IP address. I checked with cisco technical support via chat and they said it is impossible. I have used 2 previous routers with the same configuration and can see all devices.
View 1 Replies
View Related
Jun 16, 2012
I recently purchased a newer Netgear wireless router ($50 or so) to replace an old one because I was constantly having to reset it to successfully get an internet connection on my computer, my phone, and our wireless printer. Now, the computer and phone have no problems picking up the network, but I always have to reset the router to get the printer to pick it up.
View 9 Replies
View Related
Jul 15, 2012
Just upgraded my system. I am using D-Link 615 as access point hardwired LAN to LAN to ActiveTec MI424WR N capable Verizon Fios Wireless Modem/Router. The Fios Router is set up with WPA2 security. Intend on having three 615s as Access Points off of ActiveTec. Have a number of wireless devices accessing the network. Have followed instructions from manual to use 615 as Access Point, disabling UPnP and the DNCP Server function on the 615. My ActiveTec IP address is 192.168.1.1 and I changed the 615 to 192.168.1.50. I can type this IP address in my browser and get to the 615 set-up.
I have tried a couple different options in naming the SSID on the 615 set-up. If I name the SSID on the 615 the same as the ActiveTec router, when I go to Connect to a wireless signal where there is overlap, there are two signals that one can connect to, named the same SSID, the Fios is WPA2 secured and the 615 is not. Shouldn't these all be on one SSID? It seems that I have two different networks (different SSIDs) instead of one (rather than the 615 simply serving as an extension of the Fios router as a wired remote access point) with different security protocols (WPA2 and None). The SSID name almost seems meaningless. If I name the 615 SSID the same as the Fios router SSID or something different, I still have the option of selecting one SSID that is secure and one that isn't. If I try to connect to the SSID name associated with the 615 I can get on without providing a password.How do I make it so that one can walk around and go from one area to the next and seamlessly move to the best signal? I did read to select different sets of channels for each access point.
View 3 Replies
View Related
Apr 5, 2013
I have a problem with MSE tracking client in my network.What we have:PI 1.3 with evaluation license (temporary)MSE 7.4.100 with 3k device licenses (hardware appliance 3355)WLC 5508 7.4.100.For now MSE is reacheble from PI and WLC, all setings are synchronized, NMSP status is active, mse assigned for maps and synchronized, on map we have 3 APs, but in Contex Aware tab we didnt see any tracking devices, all counts 0.
View 11 Replies
View Related
