Since the EA4500 automatically updates via the Cisco Connect Software, does a copy of the firmware file get saved to the local computer?
View 1 Repliescopy or move into local area network? If any software to check which PC or Workstation or Users or IP to do this.
View 2 Replies View Relatedwe just deployed a cisco wireless solution with WLC4404-100, WCS, and a bunch of 1130AP and I experience some problem with file copy under windows xp. The file copy is working fine with my Ethernet connection however.The symptom is as follow. I cannot copy large file from a share to the computer. The copy starts then after a while (let's say 30MB copy over a 100MB file) it stops with the error 'File copy error: The network name is no longer available'. When this occurs, I still have my wireless card connected and I can ping my computer from the controller.I tried to adjust some radio settings (channel, power on the AP I'm connected to) because we have a large wireless network here, but no success. I also update the wireless card driver, create a new SSID, etc. No success at all. However the copy went fine for small file size.
View 9 Replies View RelatedIs there a way to transfer all the 'saved' wireless networks from my current laptop to my new one? I go to many different offices and have probably about 50 wireless networks 'stored' on my laptop. Everytime I go back to that office it just automatically connects. I would hate to have to try and find all these passwords again. Is there a way to transfer all this to my new laptop?
View 6 Replies View RelatedHow do i copy file of a remote computer to another remote computer through cmd
View 1 Replies View RelatedI've been experiencing a strange, repeatable behavior with my Linksys E1000. I have several wireless and wired devices connected to my E1000:
Wired: TivoHD, Sony BluRay Player, Sony TV, Windows XP Wireless: Lenovo Laptop (Windows 7), HP Laptop (Windows 7), 3 iPods, 2 iPhones
When I try to copy large files (~ 4GB) from my (wired) Windows XP box to either of my (wireless) laptops, the Linksys drops my WiFi network -- but the wired connections continue to work (including internet access). Copying the same/similar file from a WiFi device to a wired device appears to work correctly, as does copying from WiFi to WiFi.
To be clear, my WiFi network "disappears" -- it is no longer listed as an available network (as opposed to just dropping internet connectivity for WiFi). Unplugging the router and plugging it back in brings my WiFi network back up.
I have been able to repeat this issue with multiple files over the course of several weeks, and it happens about 75% of the time (i.e., I am occassionally able to complete a file copy from wired LAN to WiFi).
A little bit of background: I resurrected an old Windows XP box and am using it for shared network storage. I copied about 400 GB of files from my laptops to the XP box (WiFi to wired) with no issues at all. Pulling the same files back from XP to my laptops (wired to WiFi) has been causing the issue described above.
In the settings menu, there is no l2tp in which it was possible to configure a local address of the router. It should be: 10.155.41.41There is an option only for VPN server setup(10.255.255.254), but where it takes a local address that my provder has gave me? - it is not clear. At the same time in the status of the router receives a DNS correctly and the second address embarass me little bet DNS should be:
1) 80.252.130.253
2) 80 252.130.254
first dns is correct, and second one looks like: 80.252.45.86Maybe he does not take a local setting of ip adress via DHCP?
I thought that you're supposed to be able to type myrouter.local in order to get to the router BIOS. It does not work for me; instead it generates a Google search. Is there a way to get that to work?
View 5 Replies View RelatedWhen I attempt to upgrade the firmware, I receive error code 0x82BF010E. It wont allow me to complete the firmware upgrade on my Mac OS X (10.7.5)
View 3 Replies View RelatedWell I just check autoupdate and see new firmware out....where i can see release notes?
Anyone tested new firmware?
How to get HTTPS to work for local or remote management? Selecting HTTPS for either local or remote doesn't enable HTTPS for me. It still use HTTP.
View 2 Replies View RelatedI just upgraded my E4200v1 router to a new EA4500. The install process went fine and I'm running firmware 2.0.37.When I was running the E4200v1, I had wireless speeds of 24-30mbs. Since upgrading to the EA4500, I only have 5-8mbs wireless speed.
View 3 Replies View Relatedjust to relieve a little those who complain for the loss of functionalities/control caused by the new firmware, I want to let you know that yesterday evening when I came back home the router was bricked. After more than 2 hours of tests with the online support, they ended up the device has to be replaced.To add insult to injury, I ALSO HAVE TO PAY to ship my router to Cisco warehouse. I couldn't believe my eyes... It's not for the 10 bucks it costs the shipment (even if 10 bucks are much better in my wallet than in Cisco's), but I already spent around 300 bucks less than 2 months ago to buy the two devices and now I have to pay to fix something I have not broken.
View 4 Replies View RelatedIs classic firmware 2.0.37 for the EA4500/E4200v2 vulnerable? I see that the workaround is to use the latest Smart Wifi firmware. How soon can we expect to see a classic firmware update? [URL] Linksys quote taken from a random review that I found on Amazon below......The manufacturer commented on this review(What's this?) Posted on Jul 26, 2012 9:53:51 AM PDT Linksys says: (MANUFACTURER) Jason, Cisco Linksys plans to offer Software Updates to the EA Series router for customers who choose a local management option (including Cisco Connect/Classic). We will continue to provide Customer Care and deliver SW Updates to address Security, Critical Bugs and User Interface issues as required. Customers can comfortably stay with the local management option and Cisco will deliver continued support.
View 9 Replies View Relatedis there a link to directly download the EA4500 firmware?
View 3 Replies View RelatedJust a few things I've noticed with this build..
1.) If you reboot the modem, it seems to loose UPnP settings. I have to turn UPnP off then back on again in order UPnP to work normally.
2.) Probably petty but when I click the Disconnect button under Router Status, the page doesn't automatically refresh like it did with E4200v1. I have to manually refresh to get the connect button to appear. The refresh issue is also true within the mobile app. Again, not an issue with E4200v1.
I just ordered an EA4500. It should be here in a few days. After reading most of the 45 page Cloud Experience thread, I am leaning toward using the Classic Firmware. I have read the release notes but want your input:
1. Is the Classic Firmware stable or buggy?
2. Are there any features (besides cloud) that won't work? dual band? usb storage? dlna?
3. Where is user manual for Classic users?
I've looked all over the internet for this and can't find a definate answer. Waited for live chat and got kicked before I got to talk to someone... Just sold my computer and the plan was to buy a newer mac but we've been getting along fine without a computer with just using our iphones. So my question, I see that Cisco has the Connect Express app for the iphone, and I've read about all the features it has like changing settings, router features, etc. But I can't find anything on using the app for the initial set up of the router. I'm currently on an older linksys router (set up before we sold the computer) but it's time for a needed upgrade.
View 3 Replies View RelatedCisco keeps struggling with CCC firmware files.
Now the download link for E4200v2 CCC is available, but gives you an empty zip file (0 bytes). Quality Control is an unknown word at Cisco.
The file is no longer empty.
Installed my new EA4500 and trying to access my PC from internet (remote desktop) in order to do so I need to forward the TCP port 3389. In the old web admin page this option was easy to find and change. with the new cloud connect I can't find it. how do Ienable port forwarding on the EA4500?
View 3 Replies View RelatedI upgraded my firmware back to 2.0.37 (after Cisco tried to push that cloud nonsense down my throat) and would like to re-install Cisco Connect. Has anyone successfully reinstalled the Cisco Connect software after those fine folks at Cisco took control of your router and your computer and removed it for you?This is my last Cisco/Linksys product ever. I purchased my EA4500 a week ago and then they pull this crap
View 9 Replies View RelatedI know this is a "home" router, but there are a lot of common vulnerabilities that can be detected.
1. Is there any intent to offer a firmware update for the Non Cloud Connect option.
2. Does Cisco intend to make the Cloud Connect Firmware "feature complete" compared to the Non Cloud Connect?
3. Is there going to be support for Stateful DHCPv6?
How to share my file to the other computer using local area connection..
View 1 Replies View RelatedI tried to download the latest firmware for my router cause it's blinking and I don't want it to die on me again so I want to update first, I;m following the instructions properly and am downloading it the way I would normally but it kepts downloading as a .bin file, I'm stuck at Step 3. after the Pinging stuff My file saved as a media file and even my VLC media player won't open it.
View 9 Replies View RelatedPowerArchiver compression sw (newest version) does not recognize the file as valid archive
View 4 Replies View RelatedI just setup my new Cisco EA4500 and upgraded to latest firmware and signed up for my account.Local access to the router works fine and I see the Smart Wi-Fi admin/config interface However when I try to go to the following site: url...To access Linksys Smart Wi-Fi Tools, your router <em>requires</em> the <a href="url...Series Linksys Smart Wi-Fi Firmware</a> and you will need to associate your router with your Linksys Smart Wi-Fi account.On a computer or device connected to your router, open url... and follow the instructions. This requires that you enter the router password so have that ready.
However I see no way to perform the association step - my account exists and my router is configured.I am doing all this behind this router wi-fi network not remotely.
Lets get this straight, right off! If I plugged my computer directly to my Comcast Modem, IPv6 works fine on the { url } So I do not think any of this problem is related to my computer
I bought a EA4500 Router so I would be ready for IPv6, and also wanted N as well as the storage USB port. When I got the router, it came I guess with the original release firmware. It looked "Classic", but the box said Smart. I did the firmware upgrade. I could not get a IPv6 from Comcast. IPv4 worked fine.
I then changed to the latest "Classic: firmware, and all started to work. So I decided to try Smart again. Same thing, no IPv6 from Comcast. After being on chat for I think close to 2 hours today and getting no where, I did a reset to start at scratch again. I then got a IPv6 from Comcast. Many moons ago, it was a real hassle to switch devices hooked to a cable modem. At least here you had to power cycle the modem, so I have always cloned my wired Desktop MAC. So when I put it back in, I lost IPv6 from Comcast. Turned off MAC cloning, and I got the IPv6 again. So it looks like there is a bug in the Smart Firmware and MAC cloning since it worked OK with Classic firmware. OK, I could live with no cloning since the issues of yesteryear don't seem to be there in getting a IP from the cable modem.
Then for what ever reason, my computer would not get a valid IPv6 on the LAN from the router. I got some IP, but no Gateway. I tried everything I could think off. And again, plugging the computer directly to the cable modem, IPv6 worked fine. So something is just not right with this router as far as I am concerned.
Also, it seems like navigating through the menus on a local connection (192.168.1.1), I constantly got a message to wait popping up on the screen, for many seconds. If I had no Internet connection it would take forever on some things.
I have spent many hours on this, and am just giving up and going to look at another brand product. I don't need or want the "Smart" functions anyway.
Have just changed my E4200 to EA4500 but can my computer has not IE access. Both router has same settings and the mac adr are both in the modem at the local cabel firm.
View 4 Replies View RelatedI have downloaded the firmware update "Ver.1.0.02 build 11" for my WRT400N from linksys.com several times. I then try to update my firmware on my router. Each time I try, I get an error message that says "Incorrect file path."
View 9 Replies View RelatedI just now installed a new EA4500 Router. It installed itself automatically without a problem, by running the setup CD. No devices other than my hard wired computer and modem are connected yet.
When I went into Start > Cisco Connect to look around and check it's version, etc., I immediately got a "There's an important update for your router" notice. My concern is not wanting to install The Cloud at this time (although I wouldn't rule it out later). There has not been a trace of it so far.
I currently have Firmware Version: 2.0.36.126507 and Software Version: 1.4.12100.0. What this Important Update may be? Is it the "dreaded" Cloud? I'd rather avoid the whole rolling back to pre-Cloud issue for now, if possible.
What is the name or path for the file stored on your hard drive for the configuration settings?
View 7 Replies View RelatedIs it possible to load the configuration from a saved configuration file from a DIR-625 to a DIR-825? If so, what steps are required?
View 1 Replies View RelatedWe purchased a new monitor to the pc where the router is connected. Since then, my laptop does not connect to the internet. My network is on the list but it says "The settings saved on this computer for network do not match the requirements of the network" and the Connect button is not active.
View 1 Replies View Related