Copy File Of Remote Computer To Another Through CMD?
Feb 12, 2012How do i copy file of a remote computer to another remote computer through cmd
View 1 Replies
ADVERTISEMENT
Cisco Wireless :: 1130AG Cannot Copy Large File From A Share To Computer
Sep 15, 2010we just deployed a cisco wireless solution with WLC4404-100, WCS, and a bunch of 1130AP and I experience some problem with file copy under windows xp. The file copy is working fine with my Ethernet connection however.The symptom is as follow. I cannot copy large file from a share to the computer. The copy starts then after a while (let's say 30MB copy over a 100MB file) it stops with the error 'File copy error: The network name is no longer available'. When this occurs, I still have my wireless card connected and I can ping my computer from the controller.I tried to adjust some radio settings (channel, power on the AP I'm connected to) because we have a large wireless network here, but no success. I also update the wireless card driver, create a new SSID, etc. No success at all. However the copy went fine for small file size.
View 9 Replies View RelatedLinksys Wireless Router :: EA4500 Does Copy Of Firmware File Get Saved To Local Computer
May 25, 2012Since the EA4500 automatically updates via the Cisco Connect Software, does a copy of the firmware file get saved to the local computer?
View 1 Replies View RelatedBatch File For Remote Computer?
Sep 26, 2011 i'm trying to write a simple batch file to make my life easier. We have a few dozen Aix Boses that we telnet into and about 70 as400 Swift systems we telnet into. i was starting on a batch file like the one below where i could run it, type in the system and it log me over.What I want to add is for it to put in my user name. (if i could draw a password from a excel file that would be fantastic but id settle for just my user name). I have tried - l (username) at the end of telent and it didn't work. also tried -a. i keep getting the box with user name/password and there both blank. how i can get it to type in my user name?
here is my script.
@echo off
set /p name= What system are you logging into?
telnet %name%
i tried start script.vbs as another attempt using this info
Set cloner = CreateObject("WScript.Shell")
cloner.run"cmd"
WScript.Sleep 500
cloner.SendKeys"telnet %name%"
cloner.SendKeys("{Enter}")
WScript.Sleep 500
[code]....
How To Copy File From Hard Disk Through Cmd
Mar 26, 2011how to copy files from hard disk to hard disk through cmd
View 3 Replies View RelatedServers :: To Copy A Large File To Ftp Server
Mar 17, 2011I need to transfer a large file(about 1GB) from my pc to FTP server.I tried with C# code in .net, it stated that "buffer size has been exceeded or queue is full".I tried using cmd prompt also, but it transferred about 380 MB and a notification was displayed as "Netout : Software caused connection abort, 451 Failure writing to local file".
View 1 Replies View RelatedSharing :: Copy File From Desktop To Laptop
Jan 26, 2012i want to copy file from desktop to laptop.
View 4 Replies View RelatedCisco :: Upgrading To LMS 4.0.1 / File Copy In Progress
Apr 5, 2011After the installation LMS 4.0 I make Upgrading on LMS4.0.1. The process remains stand with the message "File Copy in progress..." during several hours. After the Reboot of the server it points me Cisco Works again with LMS 4.0 starts.OS Version: Windows 2008 R2
View 14 Replies View RelatedSecurity / Firewalls :: Copy File In Local Network?
Jan 16, 2013copy or move into local area network? If any software to check which PC or Workstation or Users or IP to do this.
View 2 Replies View RelatedCisco :: Upgrading LMS 4 To 4.0.1 - Stuck At File Copy In Progress?
Jul 18, 2011I have an issue installing LMS 4.0.1. LMS 4.0.1 installation is left with "file copy in progress". We waited for few hours and the process java.exe taking the cpu (among 45%).After few tried, same problem occurs ...Antivirus is correctly disabled (I checked the process), and the installation file was decompressed.LMS 4.0 was correctly installed using R2 patch on Windows 2008 Server R2.
View 2 Replies View RelatedCisco Switches :: SG-300 52 Server VLAN Drops Everything Except For File Copy
Oct 6, 2011I have a sg300-52 in layer 3 mode. I have 2 Dell access switches that connect to the sg300 in 4 port LAGs each. Connectivity works as expected.Servers are on their own VLAN, and plugged directly into the sg300. When somebody starts a file copy from their client workstation off a file server, the server VLAN drops everything except for the file copy. Even drops packets on its own vlan, (server to server communication) until the file copy is complete. Seems like the VLAN is rate limited somehow.
View 3 Replies View RelatedCisco Firewall :: File Transfer Using Secure Copy Server On ASA 5510?
Nov 13, 2008I have SSH and SCP enabled on the ASA 5510. I can SSH fine into the device. However, I cannot copy files to the device usng WinSCP. Used all options but nothign seems to work. I see the log authentication successful, but then WinSCP reports no response from ASA.
View 5 Replies View RelatedLinksys Wireless Router :: E1000 Drops Wifi (but Not Wired) During File Copy?
Apr 5, 2012I've been experiencing a strange, repeatable behavior with my Linksys E1000. I have several wireless and wired devices connected to my E1000:
Wired: TivoHD, Sony BluRay Player, Sony TV, Windows XP Wireless: Lenovo Laptop (Windows 7), HP Laptop (Windows 7), 3 iPods, 2 iPhones
When I try to copy large files (~ 4GB) from my (wired) Windows XP box to either of my (wireless) laptops, the Linksys drops my WiFi network -- but the wired connections continue to work (including internet access). Copying the same/similar file from a WiFi device to a wired device appears to work correctly, as does copying from WiFi to WiFi.
To be clear, my WiFi network "disappears" -- it is no longer listed as an available network (as opposed to just dropping internet connectivity for WiFi). Unplugging the router and plugging it back in brings my WiFi network back up.
I have been able to repeat this issue with multiple files over the course of several weeks, and it happens about 75% of the time (i.e., I am occassionally able to complete a file copy from wired LAN to WiFi).
A little bit of background: I resurrected an old Windows XP box and am using it for shared network storage. I copied about 400 GB of files from my laptops to the XP box (WiFi to wired) with no issues at all. Pulling the same files back from XP to my laptops (wired to WiFi) has been causing the issue described above.
Setting Up Remote Access File Server?
Jun 22, 2012I have to share some PDF files with members of my organization, I have a Windows XP Pro box dedicated for this. Currently they can access it from within the office as a shared folder. I would like to make it available remotely is there a better way other then as a FTP access.
View 1 Replies View RelatedSharing :: Attach File To Email Via Remote Upload?
Jan 11, 2012are there any free services where you can remote upload a file (zip file 25MB) and have it sent to me via email as an attachment. not a link where i have to download the file.
View 1 Replies View RelatedCisco VPN :: 3000 - How To Generate PCF File For Remote SW Client
Oct 10, 2011I can't seem to find out how I can generate a PCF file for a new remote vpn SW client? I have a VPN Concentrator 3000 series.
View 1 Replies View RelatedDeleting File From One Computer To Another?
Jun 8, 2011How do I delete a file using command prompt from one computer to another....
View 5 Replies View RelatedSave Emails To A File On Computer?
Mar 19, 2011I want to set up a file to save some of my e-mails. I am on google g-mails and use Windows xp Is there any way that I can transfer these e-mails to a file so that I can read them at a later date and also when a new one comes just transfer it to this file.
View 2 Replies View RelatedUnable To Access A Folder / File From One Of The Computer
Jul 21, 2011I'm having Local Area Network(LAN) with 10-15 client computers connected to three servers. And I've folder containing files in one of the servers which I can access and proceed my daily downloading and uploading activity.Due to Virus I've formatted some of the client computers and re-installed everything. Now the problem is I can get Ping Command request successfully but can't access that folder from the clients instead it's been asking for username and password. Also, that username and password is not working even if used it.
View 8 Replies View RelatedShare File To The Other Computer Using Local Area Connection?
Jul 7, 2011How to share my file to the other computer using local area connection..
View 1 Replies View RelatedD-link 655 Slow File Transfer From Wireless To Wired Computer
Feb 23, 20121 newer build computer connected to D-link 655 via Cat6.1 laptop computer connected to same D-link 655 via Wireless N minicard. (Intel) (130Mbps connected) Router on a 10 foot shelf, always have full bar in wireless strength on 2nd computer.
Both computers can upload and download as expected from the internet. Transfers between the two computers though are slow. Both computers are loaded with Windows 7. Transferring files to or from the laptop transfers at 1.5MB/sec to 2 MB/sec.
TP-Link 150Mbps Wireless :: WR740N - Unable To Connect Remote Desktop And Do File / Printer Sharing
Feb 19, 2013Region : India
Model : TL-WR740N
Hardware Version : V4
Firmware Version : 3.12.11 Build 120320 Rel.51047n
ISP : BSNL
I am facing some issue in LAN network.I have connected one desktop( win 7) and another desktop (win xp) to the TP link router. Both the computers got ip address and able to share the internet. But both the computers are not in the same network. That is they cant PING each other. hence they are not visible to each other.
Setting Up A Home Computer As A File Server Connected To The Motorola Router?
Jan 12, 2012I have a network that is currently set up in the following way:Modem -> vonage Motorola router -> wireless router Most computers are hard wired to the Motorola router. Some other ones connect via the linkseys wireless router. All computers are able to connect to the Internet. The problem I have is that I will be setting up a home computer as a file server connected to the Motorola router. The network acts as though it is two meaning that computers on one router can't see computers on the other router. What steps should I take in order to make all computers accessible through both routers.When I type 192.168.1.1 from a computer on the Motorola router, I get nothing, when I type in my actual ip address, I get the Motorola router. When I type in 192.168.1.1 from a linkseys connected computer, I get access to the linkseys router.
View 3 Replies View RelatedRemote Access To LAN Computer Website
May 12, 2012This is a home setup. I have a router connecting to my ISP and a home computer (Linux) with a website (not registered). I can access it from any computer in the LAN without a problem, but not from outside the LAN.I have port 80 and the LAN-side IP address open to the outside. I know the ISP-side IP address of the router.
View 2 Replies View RelatedRemote Desktop Cannot Connect To Computer
Jun 5, 2011I am trying to use my computer running Windows XP Home to remote desktop into my computer running Windows 7 Ultimate over the internet.The computer I am trying to connect to is listening on port 3389, has all sort of firewall exceptions sorted and is enabled to accept remote connections. The computer I am trying to use to connect has no firewall currently (I have disabled it just to get this working).
And yet when I try and connect using the ip address of the host computer I receive the message "remote desktop cannot connect to the remote computer for one of the following reasons"... and so on.
Can View IP Logs Of Remote Connection To Computer
Oct 16, 2012view a history of IPs that have connected to my computer. Specifically those that accessed my computer through a remote desktop connection? I believe I can check and see the ip while someone is connected but not after they disconnected.
View 1 Replies View RelatedHow To Remote Control A Clients Computer Through Internet
Nov 16, 2011I am trying to understand how to remote control a clients computer through the internet.
I have Symatec PCanywhere installed on both When i'm on the same connection (wireless internet).I can get it to work no problem.However when I try to remote in using a different internet connection it does not go through.
I've done some research and found out that instead of using the IP address it gives me (dynamically) [192.168.2.5] i need to aquire the WAN IP address from a website or through the router. As well as configuring virtual server through the router, and enable port forwarding in some way or another for specific ports.
Sharing :: Install Programs On A Remote Computer (HDD)
Oct 21, 2011That is: that I have a slow general storage drive that is becoming full. A fast HDD for recording onto with fraps and for programs that I won't use with fraps. I then have an SSD as my main drive which gets VERY full VERY quickly. I then have another computer that has a pretty quick 1TB RAID 0 running and a gigabit network, the network being the bottleneck but still pretty damn quick (120MB/s which is plenty fast enough).
Now, what I intend to do is have my storage drive stay as is; my fraps drive to continue it's job, and then for my old computer to store my big programs to run off, things like games. Is it possible to do this as when I've tried it says I don't have permission even though I gave access to the whole HDD from the network. (I'm installing on this computer but changing to the mapped network drive for the install directory).
Can't Connect To Server - Remote Computer Not Available On Network
May 1, 2011I get this message when trying to connect to server the remote computer is not available on the network.ISP provider was changed so was IP address.
View 8 Replies View RelatedRemote Desktop Connection To Use CD Rom Of Other Computer In Network?
Jun 19, 2011How I can use remote desktop connection to use the CD rom of the other computer in the network?
View 1 Replies View RelatedRemote Access To Computer Through Wireless Network
Oct 12, 2012I suspect that he did something and gained remote access to my computer.I found out about it when I checked my wireless connections on my router and found his name on the network : Steve's - Iphone and a couple of unfamiliar connections. I then opened my task manager and ended some tasks I thought were possibly infected. When I went back to the wireless status, the unfamiliar connections disappeared.
I use Norton firewall + kaspersky internet security and my virus definitions have always been up to date, but I cannot detect anything. I also set my options to permit only MAC authenticated computers and changed my wireless WPA/WPA2 key, but every time I turn my wireless on, this guy somehow is connected to my network. [code]
How To Hide Computer Details Via Remote Desktop
May 12, 2011I know that when you surf the web, websites can log your IP & MAC address.If you get my jist, I don't want my laptop to be flagged on a few web sites I have been on.My plan is to use another pc, that has a wireless braodband dongle from a mobile phone company.The pc will be attched to the wireless router via Ethernet, but banned from access the web via the router. This way I can connect remotley from my laptop.
View 8 Replies View RelatedDelete Files Beyond Recovery From A Remote Computer?
Aug 8, 2012how I may be able to delete files beyond recovery from a remote computer.
View 7 Replies View Related