Cisco Wireless :: 1130AG Cannot Copy Large File From A Share To Computer
Sep 15, 2010
we just deployed a cisco wireless solution with WLC4404-100, WCS, and a bunch of 1130AP and I experience some problem with file copy under windows xp. The file copy is working fine with my Ethernet connection however.The symptom is as follow. I cannot copy large file from a share to the computer. The copy starts then after a while (let's say 30MB copy over a 100MB file) it stops with the error 'File copy error: The network name is no longer available'. When this occurs, I still have my wireless card connected and I can ping my computer from the controller.I tried to adjust some radio settings (channel, power on the AP I'm connected to) because we have a large wireless network here, but no success. I also update the wireless card driver, create a new SSID, etc. No success at all. However the copy went fine for small file size.
View 9 Replies
ADVERTISEMENT
Mar 17, 2011
I need to transfer a large file(about 1GB) from my pc to FTP server.I tried with C# code in .net, it stated that "buffer size has been exceeded or queue is full".I tried using cmd prompt also, but it transferred about 380 MB and a notification was displayed as "Netout : Software caused connection abort, 451 Failure writing to local file".
View 1 Replies
View Related
May 25, 2012
Since the EA4500 automatically updates via the Cisco Connect Software, does a copy of the firmware file get saved to the local computer?
View 1 Replies
View Related
Feb 12, 2012
How do i copy file of a remote computer to another remote computer through cmd
View 1 Replies
View Related
Jul 7, 2011
How to share my file to the other computer using local area connection..
View 1 Replies
View Related
Aug 27, 2011
I've rolled back my E4200 router to the old firmware 1.0.0.1, then set up a media server.It generally works (e.g. it streams pre-existing media files to other devices). I can copy to this external drive small (say, < 1 MB) files. The drive has enough free space. However, I cannot copy to this external drive large (e.g. 700 MB) files.
View 5 Replies
View Related
Jun 13, 2012
I have to upgrade our Wireless LAN Controller modules inside 2811 routers.I downloaded files from Cisco site, verified MD5 hashes and hoped it will be pretty easy.the problem is, that WLC is only capable of code upgrade via TFTP and that the image size is ~80MBTFTP transfer hangs at approximately 64MB at the exact same packet number[CODE]
View 4 Replies
View Related
Apr 5, 2012
I've been experiencing a strange, repeatable behavior with my Linksys E1000. I have several wireless and wired devices connected to my E1000:
Wired: TivoHD, Sony BluRay Player, Sony TV, Windows XP Wireless: Lenovo Laptop (Windows 7), HP Laptop (Windows 7), 3 iPods, 2 iPhones
When I try to copy large files (~ 4GB) from my (wired) Windows XP box to either of my (wireless) laptops, the Linksys drops my WiFi network -- but the wired connections continue to work (including internet access). Copying the same/similar file from a WiFi device to a wired device appears to work correctly, as does copying from WiFi to WiFi.
To be clear, my WiFi network "disappears" -- it is no longer listed as an available network (as opposed to just dropping internet connectivity for WiFi). Unplugging the router and plugging it back in brings my WiFi network back up.
I have been able to repeat this issue with multiple files over the course of several weeks, and it happens about 75% of the time (i.e., I am occassionally able to complete a file copy from wired LAN to WiFi).
A little bit of background: I resurrected an old Windows XP box and am using it for shared network storage. I copied about 400 GB of files from my laptops to the XP box (WiFi to wired) with no issues at all. Pulling the same files back from XP to my laptops (wired to WiFi) has been causing the issue described above.
View 1 Replies
View Related
Jun 4, 2011
I was uploading a big 2gb file to my FTP server, it was all going good and I managed to upload the whole thing hassle free. After I finish I log out, and return about 3 hours later and try to log back in, to no avail.WinSCP gives me the following error:
[code]....
View 1 Replies
View Related
Mar 26, 2011
how to copy files from hard disk to hard disk through cmd
View 3 Replies
View Related
Apr 5, 2011
After the installation LMS 4.0 I make Upgrading on LMS4.0.1. The process remains stand with the message "File Copy in progress..." during several hours. After the Reboot of the server it points me Cisco Works again with LMS 4.0 starts.OS Version: Windows 2008 R2
View 14 Replies
View Related
Mar 6, 2012
if I have a half duplex 10 mbs connection, is the max speed to download a large file 5 mbs or would the download tend to hog the channel direction?
View 9 Replies
View Related
Jul 18, 2011
I have an issue installing LMS 4.0.1. LMS 4.0.1 installation is left with "file copy in progress". We waited for few hours and the process java.exe taking the cpu (among 45%).After few tried, same problem occurs ...Antivirus is correctly disabled (I checked the process), and the installation file was decompressed.LMS 4.0 was correctly installed using R2 patch on Windows 2008 Server R2.
View 2 Replies
View Related
Jan 26, 2012
i want to copy file from desktop to laptop.
View 4 Replies
View Related
Oct 6, 2011
I have a sg300-52 in layer 3 mode. I have 2 Dell access switches that connect to the sg300 in 4 port LAGs each. Connectivity works as expected.Servers are on their own VLAN, and plugged directly into the sg300. When somebody starts a file copy from their client workstation off a file server, the server VLAN drops everything except for the file copy. Even drops packets on its own vlan, (server to server communication) until the file copy is complete. Seems like the VLAN is rate limited somehow.
View 3 Replies
View Related
Jan 16, 2013
copy or move into local area network? If any software to check which PC or Workstation or Users or IP to do this.
View 2 Replies
View Related
Feb 28, 2012
Our office lan network is in 192.168.0.0/16 with 300 nodes and 30 server .Since its a large broadcast domain some times it takes large time for copying files.How can we avoid this problem with out changing the subnet.Also how to avoid broadcast storm.we are using cisco 2950 series switch.
View 10 Replies
View Related
Aug 15, 2011
But both of us are living far apart, but we are using the same ISP, same broadband package, same IP range too.I would like to know how to send files directly to him(or he send to me) @ full speed without extra steps like uploading my file to Megaupload
View 1 Replies
View Related
Dec 29, 2011
I'm presently experiencing an issue with my Latitude E5410 notebook where the NIC disconnects during large file transfers. For instance, if I were to copy a large file (50+ MB) from a network drive (or vice versa, copy a 50+ MB file from my notebook to the network drive), the network icon in my taskbar suddenly changes to "No Network Access", the transfer fails, and I can't access any network resources until restarting my workstation.
At first I thought it was the network backbone in our office (SonicWALL Gateway + Dell PowerConnect switches), but this error also occurs at my house with my own networking equipment (D-Link) and NAS. The Latitude E5410 notebook is running Window 7 Professional SP1 and has a built-in "Broadcom NetXtreme 57xx Gigabit Controller", and a "Dell DW1501 Wireless-N WLAN Half-Mini Card". However, this issue seems to only occur with the Broadcom adapter when I'm physically connected to our network; when the Broadcom adapter disconnects, I can connect to our local wifi network and access network resources.
View 1 Replies
View Related
Nov 13, 2008
I have SSH and SCP enabled on the ASA 5510. I can SSH fine into the device. However, I cannot copy files to the device usng WinSCP. Used all options but nothign seems to work. I see the log authentication successful, but then WinSCP reports no response from ASA.
View 5 Replies
View Related
Dec 31, 2012
I can copy or past small files but on big files like DVD ISO which are about 5GB there is a sudden shutdown like a power out.This shutdown happens exactly when I click paste. It is not the temperature or virus or a bad xp install.I clean installed xp and installed the newest lan drivers from ECS.
View 6 Replies
View Related
Jul 11, 2011
I have an several devices in the household that have USB ports, such as TV's, stereo, etc that I would like to network together & share media from my computer.Due to the setup of the household my only option is to connect the devices with a wireless USB adapter which I haven't yet purchased.The TV & stereo for example will allow mass storage devices connected via USB. If I purchased a wireless usb adapter to connect it to my computer, can I assign a drive/partition to that usb port to share the media? Is there special software that's required to do this?
View 1 Replies
View Related
Oct 22, 2012
i have 50 web IP in my company. i should be share some document, file and software on these all web IP. i should be installed one PC in Windows server 08 R2 and other PC should be installed in Windows 7. how should be share document and file in server 08 R2 system.
View 1 Replies
View Related
Apr 13, 2012
How to share a file on different networks
View 1 Replies
View Related
Mar 14, 2013
I recently pulled apart 2 external hard drives and made them internal hard drives in my computer. They hold a lot of video files as my computer is used as a media centre and is networked to several xbox360`s Using windows media centre around the house. Before I made the Hard drives internal, I used my android tablet with the es file explorer app to browse and move the files around. After they were made internal I was unable to continue to do that and when ever i tried to access one of those drives I got a message saying 'log in failure The account has no permissions
View 6 Replies
View Related
Aug 27, 2012
I am using Compaq Presario CQ41. OS Windows 7. I am connected to other PCs via LAN. My computer name is "Compaq" and the ones that I connected to are named "NEXT" and "TESTING". I am able to access data to "NEXT", "TESTING" and vice versa which means that the LAN is working. I want to share a certain file to "NEXT" but I want that file not to be shared by "TESTING".
View 10 Replies
View Related
Nov 23, 2012
I was having trouble sharing some folders, so I went in and "shared" some individual files. Now when I check what is shared, I not only have the files, I also have the folder they are located in and I don't need both. How do I get rid of the individual file sharing?
View 2 Replies
View Related
Jan 20, 2012
I created a share on our server for a few AD users and set those users up in a group I set that group to have the permissions to read/write this share. When one of those users tries to connect to the share from a PC, he is denied permissions, but when the same user connects to the share from a Mac, the file permissions work as they are set.I checked effective permissions for each user in the group, and they have the access they are supposed to. I've tried re-creating the share, recreating the group, and comparing the permissions to another share that is set up the same way (but working properly).
View 2 Replies
View Related
Dec 9, 2011
How can I share file to other computer in a home networ? Here is my network configuration: I'm using a Cisco modem with wireless (main) then I connect a D-link router on LAN port to get a better signal in the basement. On the windows 7 I turn ON the sharing setup at the PC on D-link. However the PC on D-link connection doesn't see the other PCs on the Cisco connection.
View 2 Replies
View Related
Mar 13, 2011
i tried all the possibilities... still i'm getting the same error.
View 3 Replies
View Related
Sep 10, 2012
we have a router with voip phones but no wifi, so i installed a separate wifi router but its ip is 192 range while the LAN is 10.1.1x range, how can i set it up so wirelessley connected PC's have access the file share and internet?
View 5 Replies
View Related
Sep 26, 2011
I've recently bought a laptop with Windows 7 and would like to be able to connect to my existing home network which comprises 2 desktop PCs connected via a Dlink wireless N router which is acting as a WAP to my Billion non-wireless router (which the two desktop PCs are connected). ie the two desktops are connected via wire to the Billion. The DLink is just there to provide wireless for my laptop (and Ipod)
The first day I setup the new laptop it seemed to recognise the C drive and G drive on my desktop (which I had set to 'share'). i was able to do file transfers.
However, the next day, and since then, the C and G drives don't show up on when I click 'network' on my Laptop's Win Explorer... They did reappear once after I refreshed the Win Explorer several times, but that trick didn't work again
Internet is working fine on all computers. Just would like to be able to share files across the 3 machines...
I've experimented on the laptop with setting as 'public', 'home' and 'work' but didn't have any luck.
View 4 Replies
View Related
Oct 20, 2011
I've Googled without a relevant result. I've searched the Comodo forum at great length and in detail. I've read the Comodo guide (all 300+ pages of it). I cannot find a description, in language that I can understand, of how to enable file & print sharing through Comodo's Firewall, with their free Internet Security product, version 5.5.
View 5 Replies
View Related
