I am using Compaq Presario CQ41. OS Windows 7. I am connected to other PCs via LAN. My computer name is "Compaq" and the ones that I connected to are named "NEXT" and "TESTING". I am able to access data to "NEXT", "TESTING" and vice versa which means that the LAN is working. I want to share a certain file to "NEXT" but I want that file not to be shared by "TESTING".
View 10 RepliesHaving problem locating why when a user logs on to their profile, their personal network drive shows everyones personal drive file and they have acces to all files.This is a major security concern as uppper management files are then accessable.It is random, may not always be displayed, or always occur on the same user.The User drive normally displays.
joed on \serverusers$ (H:)
When this takes place the users name is replaced with just Users Users on \serverusers$ (H:) (This can sometimes change to Z drive)
This then exposes all user drives.This does not run from a script but is used in AD under the profile drive letter. Have tried to:Rebuild profile in Active Directory. (New Profile)Re Build user profile on workstation>Rebuild Operating system on Workstation.Change drive on the user profile in AD letter H to Z.Have also tried on a different workstation.
i have 50 web IP in my company. i should be share some document, file and software on these all web IP. i should be installed one PC in Windows server 08 R2 and other PC should be installed in Windows 7. how should be share document and file in server 08 R2 system.
View 1 Replies View RelatedI recently pulled apart 2 external hard drives and made them internal hard drives in my computer. They hold a lot of video files as my computer is used as a media centre and is networked to several xbox360`s Using windows media centre around the house. Before I made the Hard drives internal, I used my android tablet with the es file explorer app to browse and move the files around. After they were made internal I was unable to continue to do that and when ever i tried to access one of those drives I got a message saying 'log in failure The account has no permissions
View 6 Replies View RelatedHow can I share file to other computer in a home networ? Here is my network configuration: I'm using a Cisco modem with wireless (main) then I connect a D-link router on LAN port to get a better signal in the basement. On the windows 7 I turn ON the sharing setup at the PC on D-link. However the PC on D-link connection doesn't see the other PCs on the Cisco connection.
View 2 Replies View RelatedHow can i share application so that other users can directly use application in network without installing in his/her system. I have ubuntu server 12.0.1 installed and users are using windows 7. I will install any other os as server if necessary.
View 5 Replies View Relatedwe have a router with voip phones but no wifi, so i installed a separate wifi router but its ip is 192 range while the LAN is 10.1.1x range, how can i set it up so wirelessley connected PC's have access the file share and internet?
View 5 Replies View RelatedI've recently bought a laptop with Windows 7 and would like to be able to connect to my existing home network which comprises 2 desktop PCs connected via a Dlink wireless N router which is acting as a WAP to my Billion non-wireless router (which the two desktop PCs are connected). ie the two desktops are connected via wire to the Billion. The DLink is just there to provide wireless for my laptop (and Ipod)
The first day I setup the new laptop it seemed to recognise the C drive and G drive on my desktop (which I had set to 'share'). i was able to do file transfers.
However, the next day, and since then, the C and G drives don't show up on when I click 'network' on my Laptop's Win Explorer... They did reappear once after I refreshed the Win Explorer several times, but that trick didn't work again
Internet is working fine on all computers. Just would like to be able to share files across the 3 machines...
I've experimented on the laptop with setting as 'public', 'home' and 'work' but didn't have any luck.
Not sure if I should be here or software but I'll start here. My question is I want to split my data plan with users on one pc, eg 3 users on windows 7 giving them 60gb each then shuts off when it is reached? I have tried looking online but seem to only find stuff about timelimits.
View 2 Replies View RelatedHow to share a file on different networks
View 1 Replies View RelatedI was having trouble sharing some folders, so I went in and "shared" some individual files. Now when I check what is shared, I not only have the files, I also have the folder they are located in and I don't need both. How do I get rid of the individual file sharing?
View 2 Replies View RelatedI created a share on our server for a few AD users and set those users up in a group I set that group to have the permissions to read/write this share. When one of those users tries to connect to the share from a PC, he is denied permissions, but when the same user connects to the share from a Mac, the file permissions work as they are set.I checked effective permissions for each user in the group, and they have the access they are supposed to. I've tried re-creating the share, recreating the group, and comparing the permissions to another share that is set up the same way (but working properly).
View 2 Replies View Relatedi tried all the possibilities... still i'm getting the same error.
View 3 Replies View RelatedI want to share any folder or drive only one user amongst 20 at windows xp.How?
View 1 Replies View RelatedHow to share my file to the other computer using local area connection..
View 1 Replies View RelatedI've Googled without a relevant result. I've searched the Comodo forum at great length and in detail. I've read the Comodo guide (all 300+ pages of it). I cannot find a description, in language that I can understand, of how to enable file & print sharing through Comodo's Firewall, with their free Internet Security product, version 5.5.
View 5 Replies View RelatedI have between 8 and 10 computers on my home LAN. They are split between the default workgroup name 'WORKGROUP' and the name I have assigned to my home LAN.There is a mixture of Win XP, Win 7 32 & 64 and various levels of Ubuntu.
After 6 long days of trying I have made not one step forward in allowing file/printer sharing.The Windows machines are all running Comodo Internet Security, on one of which I have created my idea of a set of rules to allow file/print sharing.The Windows XP machine, with a user created set of firewall rules,can see no computers on the network (using My Network Places), aside from itself and the shares created on it.It cannot see the computers which are not in the workgroup.
The most common error message this computer generates is 'network path not found'. A win 7 32 bit computer, in the workgroup, can see all other computers that are in the workgroup, including itself, twice.It cannot access any shares on the Linux computers. It is able to access shares on the Windows XP computer.ufw Firewall is installed and enabled on one Linux machine and has a vaguely similar set of file/print sharing rules.That machine can see nothing at the Network place.A couple of hours ago it could see the machines that are NOT in my workgroup but could not see the machines that are!
Another linux computer can see the two workgroups (named and default) within the windows network, but cannot browse either workgroup. The most common error message from sharing attempts with the Linux machines is 'unable to mount location. Failed to retrieve share list from server'.Right now I am reduced to transferring USB sticks between adjacent computers....
Can I use two WAP54G APs in bridge mode to file share. I'm not interested in sharing internet. Just need to share files between two desktops. Would this work if I set a static IP on the two computers or do I need to have a router in the network as well?
View 1 Replies View Relatedwe just deployed a cisco wireless solution with WLC4404-100, WCS, and a bunch of 1130AP and I experience some problem with file copy under windows xp. The file copy is working fine with my Ethernet connection however.The symptom is as follow. I cannot copy large file from a share to the computer. The copy starts then after a while (let's say 30MB copy over a 100MB file) it stops with the error 'File copy error: The network name is no longer available'. When this occurs, I still have my wireless card connected and I can ping my computer from the controller.I tried to adjust some radio settings (channel, power on the AP I'm connected to) because we have a large wireless network here, but no success. I also update the wireless card driver, create a new SSID, etc. No success at all. However the copy went fine for small file size.
View 9 Replies View RelatedRight now every computer is connected through a workgroup and some computers are sharing files to everyone and some need a login to share other files. I want to run a main server where all the files are on that computer and have it share all the files to everyone else on the network. I'm not too familiar with Windows workgroup networking and file sharing.I want to have certain files accessible to certain computers and certain files accessible to everyone on the network. I'm under the impression that I have to have the main server with all the business documents. Then create separate accounts on the server and hand them out to each individual computer. After, go to each document and specify who can access what with read/write. Can I share some files to everyone and have certain files limited to other computers at the same time? How would someone access the shared files when you need a login and will this login conflict with files shared to everyone and files shared to certain people. I remember on my small business network I need a login for certain computers because it is shared to only certain people then how would I access the files shared to everyone when I have to login to see the server files to begin with?
View 1 Replies View RelatedI have bought a new laptop and added it to my home network , two pc's and two laptops all running win 7. I share all drives on all machines. I know this is not very professional but it works for me.From the new laptop I can see all the network and see all the different drive folders but can only access the user folder on any PC from the new laptop. Also I can see the drives on the new laptop but only access the new laptops user folder from any other PC. I have checked this through a LAN cable and wireless with no difference.As the other PC's can see each other as normal I can only think there's a problem with the set up in the new laptop. I also note when I first try and access any other pc from the new laptop I am asked a domain name and password , I can put anything in these boxes and get to see the network but as I said above only access the user folders. I do have password access turned of.
View 7 Replies View RelatedI get internet connection with a 3G USB stick and it's working fine. Now I need to share this connection to my laptop with Windows Vista. I'm using a Tenda twl542r+ router to do that. I've configured everything to work fine when I connect the laptop to the desktop comp with ethernet cable, so I can get online with the laptop through the desktop comp this way. But when I use the same cable to connect the desktop comp to the router and try to get a wireless connection from the laptop it doesn't work anymore.
[code]...
how to share internet ,i have a pc (win xp) connected to internet by lan(dsl) i want share pc internet via bluetooth to laptop(win7) i searched via bluetooth and connected this two device but in laptop (network and sharing center)say "no internet access" i think that i should create "gateway connection" and set ip address in tcp/ip but i don't know how to do it
View 1 Replies View RelatedOne of my Laptop, I cannot see the Network Share Drive from My Network Place. I am using DNS320 Dlink. But I can ping and I can access web base go inside Network Share drive management. But when I try to ma \sharedrivenamefolder, "Error code 0x80070035 Network path was not found ". I already restart the network drive, router and this computer also cannot. Last time we using vbscript to set at startup and let it map automatically when window boot up every day. Other PC with XP all can access. I cannot upgrade vista to 7 because it's from remote site. But now why cannot I don't know what happen with Fuzzy Vista home.
View 3 Replies View RelatedThe first thing that came to mind was DNS. There's just 1 of about 50 people here who's having this issue. He can't browse to the network share (\servershare) using the hostname, but he can by IP address.I've checked the host file, looks normal. I can ping the server by hostname or IP address. And in fact, after going to \server, it shows 1 share which we deleted 2 days ago. It only shows 1 share when there's in fact about 20. This only happens when browsing to the server via hostname.If we browse by IP address, he can see all of the shares on the server.. (\192.168.x.x)
View 4 Replies View RelatedI want to set up my desk top and laptop so that I can share all the files on desk top or laptop.
View 1 Replies View RelatedI currently have two networks, Network A and Network B.Network A has a default gateway of 10.1.10.1 with two computers on it. I also have a router connected to Network A and this router creates Network B.Network B's router has an IP address of 10.1.10.18 with a default gateway of 192.168.1.1. Also on network B i have two computers and two printers. One printer is connected directly to the 192.168.1.1 router and the other printer is connected to one of the computers via usb.
View 5 Replies View RelatedI got firmware 1.33NA, resetted to default settings. After a reset from the button at the back of the device, I couldn't get network share to work again. I have a win7 and an xp laptop connected to the router wirelessly.
View 5 Replies View Relatedi have 2 ISP, each ISP is 20Mbps internet speed.. and i connect this 2 ISP to mikrotik router,so this network will have 20Mbps + 20Mbps line and this network have 150 users..any idea how to set the QoS? i don't want the user using p2p application will use the Full bandwidth then affect the others user become slow browsing and i want reserve some bandwidth for some user for gaming.
View 3 Replies View Related#2) Laptop - Windows 7 Pro 32 bitI have advanced sharing settings exactly the same.Set to share files and folders on private network. Both computers on the same Workgroup. Set to use username and password rather than homegroup. On the desktop, I set my second hard drive to share a video folder. If I try to access it using \COMPUTER1NAMEVideo (the share path), I get a denied message.If I access the laptop from the desktop and transfer the file that way, it works just fine. The laptop is wireless. The desktop is hooked up to the router.
View 6 Replies View RelatedNeighbor agreed to let me use his WiFi connection only if it requires no changes or disruptions on his side. His signal is broadcast with a wireless router. I can currently see his signal broadcast on my laptop, but it's very weak.I have a omnidirectional antennae already mounted outside my house with a clear sight of view. It has a cable attached to it that terminates with a N connector inside my building.I need to connect to his signal (there are several being broadcast in the area) and then forward it to my router. My router will then provide connectivity to my home network.What hardware do I need between the outdoor omnidirectional antennae (that terminates with a N connector) and the wireless router inside my building?
View 9 Replies View RelatedI have a fairly simple wireless home network. My main desktop machine is running XP Pro, and our family laptop is running XP Home. The laptop shares the My Documents folder for 2 of the 3 profiles. One of them works as it should. It is visible and accessible on the main desktop machine, but the other share is visible but NOT accessible. I get the following error message when I try to explore it from the main desktop machine:
<the share name> is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.
Access is denied.
I'm not sure when this started, but remember that the other folder being shared is working just fine. I've double and triple checked the settings, share names, and basically anything I could possibly mistype. I've restarted both PCs, and refreshed the network explorer via both the file explorer and My Computer dialog. The My Computer dialog refresh the shares for some reason that the explorer wouldn't, but I'm still denied access to that one share on the laptop.
I have several computers wirelessly connected through a "LevelOne" access pont. I connected network Peripherals as follows.(router/switch/access point/PC-01 or PC-02)one access point connected with 4 PCs with one usb printer.this printer connected with one pc.4 pcs are in same home group.They were worked well before, but now the computers cannot ping each other.Many time clint pc can't connect to server pc (Printer attached pc).rinter shows offline.advanced sharing settings are normal as microsoft. Firewall disabled.
View 3 Replies View Related