we have a router with voip phones but no wifi, so i installed a separate wifi router but its ip is 192 range while the LAN is 10.1.1x range, how can i set it up so wirelessley connected PC's have access the file share and internet?
View 5 RepliesI've recently bought a laptop with Windows 7 and would like to be able to connect to my existing home network which comprises 2 desktop PCs connected via a Dlink wireless N router which is acting as a WAP to my Billion non-wireless router (which the two desktop PCs are connected). ie the two desktops are connected via wire to the Billion. The DLink is just there to provide wireless for my laptop (and Ipod)
The first day I setup the new laptop it seemed to recognise the C drive and G drive on my desktop (which I had set to 'share'). i was able to do file transfers.
However, the next day, and since then, the C and G drives don't show up on when I click 'network' on my Laptop's Win Explorer... They did reappear once after I refreshed the Win Explorer several times, but that trick didn't work again
Internet is working fine on all computers. Just would like to be able to share files across the 3 machines...
I've experimented on the laptop with setting as 'public', 'home' and 'work' but didn't have any luck.
Neighbor agreed to let me use his WiFi connection only if it requires no changes or disruptions on his side. His signal is broadcast with a wireless router. I can currently see his signal broadcast on my laptop, but it's very weak.I have a omnidirectional antennae already mounted outside my house with a clear sight of view. It has a cable attached to it that terminates with a N connector inside my building.I need to connect to his signal (there are several being broadcast in the area) and then forward it to my router. My router will then provide connectivity to my home network.What hardware do I need between the outdoor omnidirectional antennae (that terminates with a N connector) and the wireless router inside my building?
View 9 Replies View Relatedi have 50 web IP in my company. i should be share some document, file and software on these all web IP. i should be installed one PC in Windows server 08 R2 and other PC should be installed in Windows 7. how should be share document and file in server 08 R2 system.
View 1 Replies View RelatedI recently pulled apart 2 external hard drives and made them internal hard drives in my computer. They hold a lot of video files as my computer is used as a media centre and is networked to several xbox360`s Using windows media centre around the house. Before I made the Hard drives internal, I used my android tablet with the es file explorer app to browse and move the files around. After they were made internal I was unable to continue to do that and when ever i tried to access one of those drives I got a message saying 'log in failure The account has no permissions
View 6 Replies View RelatedI am using Compaq Presario CQ41. OS Windows 7. I am connected to other PCs via LAN. My computer name is "Compaq" and the ones that I connected to are named "NEXT" and "TESTING". I am able to access data to "NEXT", "TESTING" and vice versa which means that the LAN is working. I want to share a certain file to "NEXT" but I want that file not to be shared by "TESTING".
View 10 Replies View RelatedHow can I share file to other computer in a home networ? Here is my network configuration: I'm using a Cisco modem with wireless (main) then I connect a D-link router on LAN port to get a better signal in the basement. On the windows 7 I turn ON the sharing setup at the PC on D-link. However the PC on D-link connection doesn't see the other PCs on the Cisco connection.
View 2 Replies View RelatedI have a Cisco ASA 5505 with the base License. I want to split my network and add a new Internet Access, the first network in Orange works fine. My question is how can i access the file server from the second network (192.168.X.0 /24) ? The 3 switches are Cisco SF300-24P.
View 7 Replies View RelatedI have setup a webserver on my home PC and I have forwarded port 80 on my router to the IP adress of the PC that is running the web server. The web server is working great; I can get to my web pages from outside of my home by going to http://MyIpAddress/Anyway, the problem is with the Windows Media Player plugin I'm using. I want to embed 6GB MPEG-2 videos into my web pages. I have some videos on my PC and I want to be able to watch them remotely by connecting into my web page. It works fine when I'm at home; other PCs can connect and play the videos no problem. The problem is when I'm at work. When I'm at work, I go to my web page (via my IP address in a web browser) and the Media Player plugin says "Connecting" for a minute, then it says Ready, but the video will not play. I tried using a smaller, AVI file (680 MB) instead to see if the problem was streaming such a large file, but the video still would not play.Do I need to foward more ports on my router so that Windows Media Player can connect back and get the information it needs?
View 4 Replies View RelatedI can not access Windows Live Messenger, it will not connect. I can visithotmail.com but not delete or send any e-mails. It says Hotmail is not responding.I can also not access Windows Update. When I search for updates it comes back with error 80072EE2. I also have problems accessing secure websites where I need to pay for something, e-Bay, paypal, make payments off Credit Cards etc.However I can access all websites on my iPhone over the same Wi-Fi. I took the same laptop to 2 other addresses and it works fine at both and able to access all webpages etc!I am running Windows 7 and have tried IE, Safari and Firefox, all with same problems. I am with o2 home broadband and have been with them for years with no problems. I have replaced the router, and have another new router on the way, but am expecting the same problems!
View 1 Replies View Relatedi have an unknown pc accessing my home network. How do I delete/remove this pc
View 1 Replies View RelatedHaving problem locating why when a user logs on to their profile, their personal network drive shows everyones personal drive file and they have acces to all files.This is a major security concern as uppper management files are then accessable.It is random, may not always be displayed, or always occur on the same user.The User drive normally displays.
joed on \serverusers$ (H:)
When this takes place the users name is replaced with just Users Users on \serverusers$ (H:) (This can sometimes change to Z drive)
This then exposes all user drives.This does not run from a script but is used in AD under the profile drive letter. Have tried to:Rebuild profile in Active Directory. (New Profile)Re Build user profile on workstation>Rebuild Operating system on Workstation.Change drive on the user profile in AD letter H to Z.Have also tried on a different workstation.
I have a fairly simple wireless home network. My main desktop machine is running XP Pro, and our family laptop is running XP Home. The laptop shares the My Documents folder for 2 of the 3 profiles. One of them works as it should. It is visible and accessible on the main desktop machine, but the other share is visible but NOT accessible. I get the following error message when I try to explore it from the main desktop machine:
<the share name> is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.
Access is denied.
I'm not sure when this started, but remember that the other folder being shared is working just fine. I've double and triple checked the settings, share names, and basically anything I could possibly mistype. I've restarted both PCs, and refreshed the network explorer via both the file explorer and My Computer dialog. The My Computer dialog refresh the shares for some reason that the explorer wouldn't, but I'm still denied access to that one share on the laptop.
I have several computers wirelessly connected through a "LevelOne" access pont. I connected network Peripherals as follows.(router/switch/access point/PC-01 or PC-02)one access point connected with 4 PCs with one usb printer.this printer connected with one pc.4 pcs are in same home group.They were worked well before, but now the computers cannot ping each other.Many time clint pc can't connect to server pc (Printer attached pc).rinter shows offline.advanced sharing settings are normal as microsoft. Firewall disabled.
View 3 Replies View RelatedI have a Linksys/Cisco wireless router. For the purposes of a high def throughput, I have a wired connection from the router to a Windows Media Center appliance in a separate room.However, now I have a second media appliance (Roku device) that I want to run in a wired fashion as well. Here is the thing, I don't want to run a second Ethernet line from the router to new roku device. Is there some way I can share the existing ethernet line between the roku device and the media center appliance? Ideally, since the two devices would never be used at the same time, I was hoping some other network device (another router?) could be hooked up to split the line between the devices. Worst case, is there some simple splitter I can use? Obviously I am trying to avoid the worst case scenario: switching the ethernet connection manually between the two devices every time I want to go from one to the other.
View 6 Replies View RelatedI have bought a new laptop and added it to my home network , two pc's and two laptops all running win 7. I share all drives on all machines. I know this is not very professional but it works for me.From the new laptop I can see all the network and see all the different drive folders but can only access the user folder on any PC from the new laptop. Also I can see the drives on the new laptop but only access the new laptops user folder from any other PC. I have checked this through a LAN cable and wireless with no difference.As the other PC's can see each other as normal I can only think there's a problem with the set up in the new laptop. I also note when I first try and access any other pc from the new laptop I am asked a domain name and password , I can put anything in these boxes and get to see the network but as I said above only access the user folders. I do have password access turned of.
View 7 Replies View Relatedi want to connect two systems at my home to share internet and data through wireless connection
View 2 Replies View RelatedFor my office i want to share my internet connection using proxy and i also want to restrict the websites.
View 4 Replies View RelatedMy Laptop IP 192.168.0.198 cannot see shares with desktop 192.168.0.199. Both PC's are win 7 with firewalls turned off. However the desktop can see shares on laptop. All computers are part of WORKGROUP. When wireless i can ping desktop.When i plug Ethernet cable to laptop 192.168.0.196 I can access desktop files.Also weird thing i have turned off password protection sharing but still asked for password (can live with that though)
View 1 Replies View RelatedI have been using DD-WRT firmware on my Linksys WRT160v3 for more than a year. I never used a PPPoE internet connection on my router. So, I don't know if I'm doing anything wrong which causes me "NO INTERNET CONNECTION". It seems to me that the router itself can connect to the internet. But, I cannot get any internet on my pc or wirless device (neither on LAN or WiFi). I tried sharing the internet through my laptop using connectify-me. And, I was able to share my internet to my mobile devices (WiFi) without any problem.
Do I need to put DNS or change any setting?
I want to get the ability to share folders between my PC using a Wireless router. One of the pc's is a Desktop running using XP SP3 and the other is a laptop running Vista SP1. how to set up away to just share certain folders between the two machines?
View 1 Replies View RelatedI have a desktop and a laptop each using xp. Each is set up to connect to the internet wirelessly, through different networks. I do not wish to disturb those settings.I want to set up a third, ethernet network, linking the desktop and laptop, for file sharing only, no internet.
View 11 Replies View RelatedI finally got my 2 computers networked and seeing each other but when I try to share a file from comp B to comp A all I get is the data files, no .exe or application files. Can I not run a game stored on another network computer?
View 3 Replies View RelatedI run a home private server on Centos 5.5 I believe. A while ago, a surge destroyed a different computer with pictures on it that my parents would like to access. The hard drive itself is just fine, and I've backed up those files on an external hard drive. What I would like to do is allow my parents to access them through Samba. Samba has already been in long time use, but it is configured to only allow access in a jail inside each user's home folder on the root hard drive. I have a suitable hard drive already formatted and mounted that can fit all the pictures that they wish to have access too. What I'd like to do, is change the path that one of my users use to the mounted hard drive.
View 3 Replies View RelatedUsing the host file to block inappropriate websites on a pc works great.But i was wondering can you do the same on a wireless router.for some reason i can not find the option to do this on my netopia router.
View 2 Replies View RelatedI have been trying to get this setup for 2 days now and so far NADA.....
Router: Linksys E3000 - below is a list of all devices connected (hardwired T568B) to the 4 ports with a laptop connected via wireless
1. Main PC - motherboard: ASUS Maximus IV Extreme-Z (dual GB LAN ports)
2. Media Server - motherboard: MSI Z68A-GD80 (dual GB LAN ports)
3. Test Bench AMD PC
4. WD TV Live
Currently: I have all 3 computers running Windows 7 and connected to a Homegroup. I have given the correct permissions to enable sharing of files between each of the 3 computers and can transfer files from one PC to the next w/o any issues.
Desired: I want to connect my Main PC and Media Sever with a crossover cable using the 2nd LAN port on each motherboard, so that I don't have to go through the router to transfer data to and from these 2 PCs. I will have each PC also connected to the Linksys E3000 router via the 1st LAN port on each motherboard to supply the internet connection, so I am also not trying to "share" an internet connection between these 2 PCs. Basically, I want to run my home network through the Linksys E3000 and then a 2nd network for the 2 PCs using the crossover cable.
Current Problem: I disconnected the straight-through cables from the router to each computer from the 1st LAN port. I then connected the crossover cable from the Main PC to the Media Server and setup a new Home network in the Network and Sharing Center in Windows 7. Everything worked and I could transfer data to and from each these 2 PCs, so i know I wired the crossover cable correctly. Then I reconnected the straight-through cables coming from the router to the 1st LAN ports of each mobo, thinking that each PC would auto-detect the internet connection and reacquire my existing home network, enabling an internet connection again. However, this did not happen.
[URL] I also followed this how-to guide on microsoft.com, but when I get to Step 3 where it says that an "Unidentified network icon" will aprear in the Network and Sharing Center, it does not!
From Googling, reading, and troubleshooting I believe I know 2 things:
1. All of the hardware is functioning properly - when the straight-through cables from the router are disconnected, the 2 PCs are networked through the crossover cable and files can be transferred.
2. The problem is with Windows 7 somewhere - I think?
Here's the layout: Cable modem in the basement. Several devices in which I'd prefer a wired connection in the basement. Upstairs on the 1st and 2nd floor of the house are many devices in which wifi is fine or preferred.Here's the problem: As you might guess, wifi is weak upstairs and certainly on the patio and 2nd floor. I have an access point upstairs that I've experimented with but it is flaky.
View 1 Replies View RelatedI have an ADSL connection using a wireless DLink modem 2730U I want to share my internet with my neighbour as limited speed and limited traffic.How can I do this? Is it possible as wireless?
View 4 Replies View RelatedI have a 1Tb Iomega home media network drive. It normally connects via the network to all my machines (iMac osx, eee pc W7, ubuntu 10). But, something has happened, so now I can see the folders on the network drive but when I click on it (photos, videos etc), it says Windows cannot access \Iomega-0E10FDmovies
Error code: 0x80070043
The network name cannot be found
I have tried disabling the firewall in the router and the W7 eee pc, but nothing has worked.
I am currently connecting my PC to a mobile phone as a Wireless Access Point to give that PC access the internet. I also have a small home network, with one other PC and a Game Console. I own a Linksys E900 Wireless-N300 Router. My problem is this. How do I share that internet connection with the rest of the home network?To the best of my knowledge its not possible to connect my mobile phone directly to my Linksys E900 Wireless-N300 Router.
So my alternative idea is to connect to the internet via one PC, set up that internet connection as "Shared." and then allow the other devices on the home network to connect thru this. My question is how do I set up my Linksys E900 Wireless-N300 Router to allow my other PC and game console connect to the internet? Bridge Mode? PPPoE?
Below is how I have established network between my PC and my laptop at home (being novice in networking, it took me few days to achieve the feat). And it is working perfectly. I can easily share files between them.Laptop
IP Address: 192.168.1.4
Subnet mask: 255.255.255.0
Default Gateway: 192.168.1.2Desktop
IP Address: 192.168.1.5
Subnet mask: 255.255.255.0
Default Gateway: 192.168.1.2ASUS RT-N10+ Router,/b>
IP Address: 192.168.1.4
Default Gateway: 192.168.1.2
I have connected the Desktop PC to the router using a LAN cable, and laptop to router over WiFi. Both, PC and laptop are running on Windows 7 OS, are on same HomeGroup, have same username / password. Also, I have connected the Ethernet cable to LAN port 1 of the router.Click here to view a graphical representation of the network. Can't post image here, because I don't have 10 reputation points.Now, what I want is use connect to Internet using a 3G USB modem on one device and share it over the network on the other. I tried Huawei and Micromax 3G USB modem. Both obtain a new IP address whenever I connect to Internet (means they have dynamic IPs). Rest, both have Subnet Mask as 255.255.255.255 and Default Gateway as 0.0.0.0. In that case, I cannot directly share Internet from the modem. Preferred DNS is blank for now in both, laptop and PC.What I am planning to do is to connect to Internet on laptop using the 3G modem and share the Internet connection over laptop's Wi-Fi (as hotspot) using Connectify, which I have done already. That, I suppose, will broadcast a static IP to connect to.Now what I can't figure out is that what changes should I make to the network settings of the router and the PC so that PC connects to the Internet broadcast by Connectify?
I have an epson stylus 720 WD and I want to be able to print from my iPad and iPhone?
View 3 Replies View RelatedHow to share drives in windows 7 over a wifi network
View 1 Replies View Related