view a history of IPs that have connected to my computer. Specifically those that accessed my computer through a remote desktop connection? I believe I can check and see the ip while someone is connected but not after they disconnected.
View 1 RepliesI am trying to setup 4 cameras to view with remote live view. I set up my server with IP addresses of 192.168.1.80 .... 85. The screen has only the option for 1 video channel. I have seen on-line screen shots that have options for channel 1 through 8. I want to assign each camera to a different channel so I will be able to use remote live view to show all 4 cameras at the same time. I can only show one at a time. Do I need a different version than 3.3 or some obscure windows 7 setting?
View 5 Replies View RelatedI am having trouble viewing all the Administration logs in ACS View. I have my Local Log Target set to a Maximum log retention period of 90 days. In ACS View I can display authentications that go back 90 days + However when I try and display the "ACS_Configuration_Audit" in View and perform a Custom query that goes back 90 days it will only display about 35 days of Admin logs.I know the logs are there because when I go into CLI and do a search like "show logging | i "ObjectType=Administrator Account" the Administration logs go back over a year.why ACS View cannot display all the Admin logs?The ACS is running v5.1.0.44 Patch 6 (Also experiencing this in a v5.2 ACS as well)
View 2 Replies View RelatedI have a Wireless LAN Controller 4402 and WCS 7.0, and I have a few MAC addresses that are "disabled" due to policy violations. How can I view a log or a report that will show me if these MAC addresses are still attempting to connect?
View 3 Replies View RelatedWe have below queries regarding new version of ACS 5.3.
a) Is it possible to view real time logs for AAA clients and for ACS administrator?
b) Is it possible to track each and every change record for ACS Administrators and sessions in ACS . Ex addition and deletion of commands in command sets. As of now, we are able to see that config has changed by ACS admin but not able to see which commands are changed (Added or Removed)
c) As per user guide of ACS 5.3, we have an option for creating customized reports but unfortunately we are not able to see same option in ACS 5.3 GUI. Need confirmation on the same.
d) Is it possible to do configuration changes for ACS via Command line.
We have a Cisco 4404 WLC and and about 70 Cisco 1131 APs. I am very new to the Cisco WLC and I need to know how to view its AP registration and unregistration logs. We have a AP that has unregistered and we can't seem to find what switchport it was attached to. It would be useful to know the IP address and ideally any CDP information it had. Unfortunately you can only view this information in the WLC if the AP is registered, but at this point it is not.
View 2 Replies View RelatedHow I can use remote desktop connection to use the CD rom of the other computer in the network?
View 1 Replies View RelatedI have a problem with ASA 5510 8.0(4) This is a remote-access VPN setup and it's functional, no problems here...
But I keep getting logs like this every few seconds:
Group = <censored>, Username = <censored>, IP = <censored>, Reaper overriding refCnt [0] and tunnelCnt [0] -- deleting SA!
Group = <censored>, Username = <censored>, IP = <censored>, SA lock refCnt = 0, bitmask = 00000080, p1_decrypt_cb = 0, qm_decrypt_cb = 0, qm_hash_cb = 0, qm_spi_ok_cb = 0, qm_dh_cb = 0, qm_secret_key_cb = 0, qm_encrypt_cb = 0
I have a problem on a Cisco ASA5520 version 8.2(5). A customer has set up a syslog to keep tracks of tcp sessions made by vpn users. On the syslog we filter %ASA-6-302013 and %ASA-6-302014 log messages, respectively: Built inbound TCP connection and Teardown TCP connection. When the connection is made by a vpn user, at the end of the log line you see the vpn username which should be the same in both the messages for the same connection. I have verified that when a user, let's say UserA, disconnects from the vpn, their tcp sessions are not properly closed; if another user, let's say UserB, establish a VPN immeditaely after and gets the same IP address previously assigned to UserA, the log sessions are recored with UserA in the %ASA-6-302013 message and UserB in the %ASA-6-302014 message. I presume this is due to the fact the tcp sessions are not tore down when the first user disconnects and it looks like a bug to me but I didn't find it referenced anywhere. Is there a way to have all tcp session tore down when a user disconnects the VPN connection?
View 2 Replies View RelatedI updated my RV180W to the latest firmware and found that port forwarding works I started using it.I've just noticed that since changing over to the RV180W, my Apacher server logs show the router's IP address instead of the remote IP address - every remote request appears to come from 192.168.0.1.
How do I get it to forward the remote IP.
ACS 4.2 and remote agent was working properly two months before. But in past two months we are facing weird issue in RA server.For Somedays we are missing logs from both ACS and RA server. Once we notice this we use to restart the services in ACS to give workaround. But due to this we loose our daily logs intermittently and facing risk in without having logs.This is not like communication between ACS and RA is not at all happening. It happens properly for a week or month, but again it is going bad without any config change. CSAgent.ini file is properly configured.Full version is 4.2.1.15 and patch is 10 in acs and ra.ACS and Remote Agent Major and Patch version are same.
View 5 Replies View RelatedMy Brother-in-law, who lives in Singapore, uses his DCS-2121s (2x) for monitoring his newborn and it works great!
Me and my wife, who lives here in the US, always views those IPcams through my web browser from my PC (firefox 7.1).
I was just wondering if there is a different way to watch those cameras using my computer. I was looking for a dedicated D-link APP or Program so I don't have to use the browser anymore.
BTW, my brother uses dyndns with his DCS-2121.
I have a D-Link model DIR-625, and it always seems to disconnect when my mother logs on her computer. Is there some kind of setting on her computer that could be disconnecting us? When my dad is on his I never disconnect which is why I am wondering it must be something on her computer that's interfering with the signal or something. If I reset the router while she's still on, It will disconnect again within a few minutes. So where can I check if it could be her computer that's interfering with the signal?
View 1 Replies View Relatedi want to view computer screens on my network how can i do this without them knowing?
View 3 Replies View RelatedRegion : UnitedStates
Model : TD-W8961ND
Hardware Version : V2
Firmware Version :
ISP : at&t
Having trouble setting up router for remote viewing my Swann DVR. I've gone to Advanced Set Up( NAT)to Vertual Server and added two rules for DVR one for port 85 and one for port 9000 both with the DVR's IP Add. of 192.168.1.165 Is there something else I should do?
I can not view work group connections on my computer especially when I tried to view the work group connections it always showed the message like this work is not accessible you might not have permission to use this network resource.
View 6 Replies View RelatedI have bought Linksys E 4200. I'm connected up by protocol PPPoE by my provider, but IPTV doesn't work on my computer.I use the program IP-TV Player and/or VLC Player and both don't work. I only see the list of channel, but any channel doesn't load. Before I used the router DLink Dir 300, and everything was Ok.
View 3 Replies View RelatedMy old trusty Linksys router started causing BSODs on my computer (!) by crashing the IP stack, so I bought the DIR-655. No more BSODs, throughput to the web went way up, so all that was a success.Then I tried to set it up to send syslog data to my computer, and it was totally useless. Want to see traffic logs, not debug messages. After a lot of discussion with level-3 tech support, it seems that this router cannot send syslog data to a syslog server that shows the incoming and outgoing traffic IPs for monitoring a network.
View 4 Replies View RelatedI have a Cisco 857 which seems to be dropping connection on its public interface.I would like to see the logs of the ppp or something which may identify the problem of why the device has lots its connection.
I know what you can setup logs for a specific IP, but it is possible to setup logs for debug messages?Also what other logs would identify the problem?
On wireless (lenovo tabletx61) I cannot connect through the intranet - no problem connecting through internet. When I manage to connect through intranet connection is dropped quite often.No problem connecting via Ethernet cables.
View 1 Replies View RelatedI'm using LMS 4.0, after I auto discovery device, I can see all of devices on my network but I cannot view the links connect between the ASR 9000 and Catalyst 6509. I've just checked cdp neighbor on these devices, I can see the full of neighbors.
I attach 2 file, with the visio topology and the topology view on LMS , and I'm 100% sure about the connections between these devices are used. I try to re-discovery many times but it not work correctly.
How do i copy file of a remote computer to another remote computer through cmd
View 1 Replies View RelatedThis is a home setup. I have a router connecting to my ISP and a home computer (Linux) with a website (not registered). I can access it from any computer in the LAN without a problem, but not from outside the LAN.I have port 80 and the LAN-side IP address open to the outside. I know the ISP-side IP address of the router.
View 2 Replies View RelatedI am trying to use my computer running Windows XP Home to remote desktop into my computer running Windows 7 Ultimate over the internet.The computer I am trying to connect to is listening on port 3389, has all sort of firewall exceptions sorted and is enabled to accept remote connections. The computer I am trying to use to connect has no firewall currently (I have disabled it just to get this working).
And yet when I try and connect using the ip address of the host computer I receive the message "remote desktop cannot connect to the remote computer for one of the following reasons"... and so on.
i'm trying to write a simple batch file to make my life easier. We have a few dozen Aix Boses that we telnet into and about 70 as400 Swift systems we telnet into. i was starting on a batch file like the one below where i could run it, type in the system and it log me over.What I want to add is for it to put in my user name. (if i could draw a password from a excel file that would be fantastic but id settle for just my user name). I have tried - l (username) at the end of telent and it didn't work. also tried -a. i keep getting the box with user name/password and there both blank. how i can get it to type in my user name?
here is my script.
@echo off
set /p name= What system are you logging into?
telnet %name%
i tried start script.vbs as another attempt using this info
Set cloner = CreateObject("WScript.Shell")
cloner.run"cmd"
WScript.Sleep 500
cloner.SendKeys"telnet %name%"
cloner.SendKeys("{Enter}")
WScript.Sleep 500
[code]....
I am trying to understand how to remote control a clients computer through the internet.
I have Symatec PCanywhere installed on both When i'm on the same connection (wireless internet).I can get it to work no problem.However when I try to remote in using a different internet connection it does not go through.
I've done some research and found out that instead of using the IP address it gives me (dynamically) [192.168.2.5] i need to aquire the WAN IP address from a website or through the router. As well as configuring virtual server through the router, and enable port forwarding in some way or another for specific ports.
That is: that I have a slow general storage drive that is becoming full. A fast HDD for recording onto with fraps and for programs that I won't use with fraps. I then have an SSD as my main drive which gets VERY full VERY quickly. I then have another computer that has a pretty quick 1TB RAID 0 running and a gigabit network, the network being the bottleneck but still pretty damn quick (120MB/s which is plenty fast enough).
Now, what I intend to do is have my storage drive stay as is; my fraps drive to continue it's job, and then for my old computer to store my big programs to run off, things like games. Is it possible to do this as when I've tried it says I don't have permission even though I gave access to the whole HDD from the network. (I'm installing on this computer but changing to the mapped network drive for the install directory).
I get this message when trying to connect to server the remote computer is not available on the network.ISP provider was changed so was IP address.
View 8 Replies View RelatedI suspect that he did something and gained remote access to my computer.I found out about it when I checked my wireless connections on my router and found his name on the network : Steve's - Iphone and a couple of unfamiliar connections. I then opened my task manager and ended some tasks I thought were possibly infected. When I went back to the wireless status, the unfamiliar connections disappeared.
I use Norton firewall + kaspersky internet security and my virus definitions have always been up to date, but I cannot detect anything. I also set my options to permit only MAC authenticated computers and changed my wireless WPA/WPA2 key, but every time I turn my wireless on, this guy somehow is connected to my network. [code]
I know that when you surf the web, websites can log your IP & MAC address.If you get my jist, I don't want my laptop to be flagged on a few web sites I have been on.My plan is to use another pc, that has a wireless braodband dongle from a mobile phone company.The pc will be attched to the wireless router via Ethernet, but banned from access the web via the router. This way I can connect remotley from my laptop.
View 8 Replies View Relatedhow I may be able to delete files beyond recovery from a remote computer.
View 7 Replies View RelatedI am using a proxy to access the internet on my computer, how can i use that proxy on my iphone, when sharing internet connection?
View 2 Replies View RelatedI am looking up setting a VPN using ASA 5505s so we can connect a mobile network of computers to our base network of computers. The base network has a static public IP address, but the mobile site will not. I was thinking of using a remote access VPN setup, but I am unsure if I can have a network of computers connecting in to the remote access VPN setup.
View 5 Replies View Related