Cisco :: ACS 5.3 / View Real Time Logs For AAA Clients And For ACS Administrator?
Mar 6, 2012
We have below queries regarding new version of ACS 5.3.
a) Is it possible to view real time logs for AAA clients and for ACS administrator?
b) Is it possible to track each and every change record for ACS Administrators and sessions in ACS . Ex addition and deletion of commands in command sets. As of now, we are able to see that config has changed by ACS admin but not able to see which commands are changed (Added or Removed)
c) As per user guide of ACS 5.3, we have an option for creating customized reports but unfortunately we are not able to see same option in ACS 5.3 GUI. Need confirmation on the same.
d) Is it possible to do configuration changes for ACS via Command line.
View 1 Replies
ADVERTISEMENT
Oct 17, 2012
I have an issue on an ASA 5510 that I have noticed today, when I am using the log viewer all of the information recorded only shows the high end source and destination ports. For example
Source IP 10.10.4.69
Source Port 59886
Destination IP 8.8.8.8
Destination Port 59866
So what seems to be happening is that I am seeing only half of the connection in the log viewer, I see the side with the high end ports and not the side with the ports the application uses, this example was done with a ping. All my services are working correctly and the client sending the ping gets the response expected, it just seems I have lost the logging display?
View 4 Replies
View Related
Oct 16, 2012
view a history of IPs that have connected to my computer. Specifically those that accessed my computer through a remote desktop connection? I believe I can check and see the ip while someone is connected but not after they disconnected.
View 1 Replies
View Related
Jan 4, 2011
I have a Wireless LAN Controller 4402 and WCS 7.0, and I have a few MAC addresses that are "disabled" due to policy violations. How can I view a log or a report that will show me if these MAC addresses are still attempting to connect?
View 3 Replies
View Related
May 18, 2011
I am having trouble viewing all the Administration logs in ACS View. I have my Local Log Target set to a Maximum log retention period of 90 days. In ACS View I can display authentications that go back 90 days + However when I try and display the "ACS_Configuration_Audit" in View and perform a Custom query that goes back 90 days it will only display about 35 days of Admin logs.I know the logs are there because when I go into CLI and do a search like "show logging | i "ObjectType=Administrator Account" the Administration logs go back over a year.why ACS View cannot display all the Admin logs?The ACS is running v5.1.0.44 Patch 6 (Also experiencing this in a v5.2 ACS as well)
View 2 Replies
View Related
Apr 16, 2012
We have a Cisco 4404 WLC and and about 70 Cisco 1131 APs. I am very new to the Cisco WLC and I need to know how to view its AP registration and unregistration logs. We have a AP that has unregistered and we can't seem to find what switchport it was attached to. It would be useful to know the IP address and ideally any CDP information it had. Unfortunately you can only view this information in the WLC if the AP is registered, but at this point it is not.
View 2 Replies
View Related
Apr 26, 2011
Topologies in real time implementation compare and contrast each other?
View 3 Replies
View Related
Feb 10, 2010
I installed a new ASA using 8.2.2 version and ASDM 6.2.5 version in contexts mode.When i enable logging for ASDM as debugging i cannot use the real time log viewer because I have an error "Syslog connection Lost. Try restarting the syslog connection", I tried to reconnect using the icon at the bottom but nothing change.
View 9 Replies
View Related
Dec 20, 2011
I'm running into this issue on an ASA 5520 running version 8.2(2)9 and ASDM version 6.2(1).
I have an ACL denying traffic to a certain IP range and the logging level set to Debugging. The hit count is rising quite rapidly but when selecting "Show Log" the Real-Time Log Viewer opens with a value of 0x13d0ee2a in the "Filter By" field and no logs are ever shown.
Logging is enabled globally and Logging Filters on ASDM is set to Debugging as well.
how I can get the RTLV working?
View 7 Replies
View Related
Mar 4, 2013
We have a Cisco ASA 5520 and im looking for a way to monitor largest outgoing and incoming traffic per ip in real time so to know which of my internal computers are using the most of our Internet Line. Is there a way to this through ADSM ? We use version 6.3.
View 1 Replies
View Related
Feb 15, 2012
I have a new ASA 5510 running 8.3(1) and ASDM 6.4(5)
I am trying to use the real time log viewer to troubleshoot some access issues, but I am getting delays of up to 30 seconds or more between my client connecting to the ASA and the corresponding events showing in the RT Log viewer. I am using a simple filter for source IP as it's quite a busy device.
I've seen an article that says to turn off certain logging IDs (such as 304001 from memory) which I have done, but no different.
View 6 Replies
View Related
Jul 6, 2012
I have an ASA 5520 and I'm using Solar winds real time interface tool to monitor the through put of the port. It seems I can never get it to use more than 100mb, where should I check?
I have run a sh int giga 0/1 and it shows the port is 1000mb full duplex and the I have also checked the other end where it plugs into the LAN and this also says the port is running at 1000mb full duplex.
View 1 Replies
View Related
Feb 19, 2012
Whenever new clients logs on to the network, the network tends to kick out users already logged on to the network.
View 2 Replies
View Related
Nov 17, 2011
Need implementation of an OID to view the number of connected clients per Access-Point? I am using a 5508 WLC.
View 4 Replies
View Related
Sep 2, 2012
I just want to Know how many users can connect to AIR-CAP3602I-x-K9 at singel point of time.
I am currently facing Threshold errors In 1140 AP where we can see that 12 client is recommended by cisco [URL]
View 2 Replies
View Related
Feb 11, 2011
a colleague at my university is using an Airport Time Capsule 1TB (Model A1355) to share files with his students wirelessly. The machines are running Leopard 10.5.8 and It works well but it will only allow 20 wireless clients at a time. All the client machines log in with a password. When you remove one of the 20, another can log in.
The tech specs on the Apple website just say that it accepts Wireless guest access and there is no mention of a 20 client limit. I looked right through Airport Utility and couldn't find where the number of wireless clients could be configured.Does anybody know if this is the hard limit for the number of wireless clients for an Airport Time Capsule 1TB (Model A1355)? If it is not a hard limit does anybody know how to change it?
View 3 Replies
View Related
Apr 12, 2013
I am trying to setup 4 cameras to view with remote live view. I set up my server with IP addresses of 192.168.1.80 .... 85. The screen has only the option for 1 video channel. I have seen on-line screen shots that have options for channel 1 through 8. I want to assign each camera to a different channel so I will be able to use remote live view to show all 4 cameras at the same time. I can only show one at a time. Do I need a different version than 3.3 or some obscure windows 7 setting?
View 5 Replies
View Related
Feb 6, 2013
How to configure ACS 5.1 local administrator accounting and where have to check the accounting log . suppose administrator logged in to ACS and created some user or delete users where will see the log , which user have they created or deleted.
View 1 Replies
View Related
Feb 6, 2011
For some time, I cannot access some websites. It gives me a 401 the web site is blocked by the administrator. I use a d-link router and my brother is the administrator. He told me he hasn't blocked anything. We tried to reset the router but it still gives me the 401 problem.I think it isn't a router problem. I have tried using my laptop and tried to access some sites. It still gives me the error so i dont think it's a computer related problem. I have tried to ping it. It still doesn't work. I have also tried to erase all the cookies and cache. The problem is still there. How can I fix this? My operating system is Windows XP Professional version 2002 service pack 2.
View 5 Replies
View Related
Jun 24, 2011
I have a laptop running Windows 7 and it is on a wireless network.The trouble I am having is, the Administrator account can get on the internet with no problems, however, another user cant.It was originally just a "User" account, however, I changed it to Administrator to see if that would resolve the problem. it didn't.
View 4 Replies
View Related
Jun 3, 2012
Have set up a pair of ACS 5.3 servers and have set up device administration authentication be passed through to an RSA server via RADIUS. All works great.
What we want to do is go a step further and set the system up so that ACS Administrators also have to authenticate to the ACS system by RSA via RADIUS (the same as the Device Authentication we've set up) for ACS administration tasks.
Looking at the options available in the ACS Administration setup (administrator accounts etc) there doesn't seem to be an option to authenticate via another method apart from a local administrator account on the ACS.
Is it possible to do this?
View 1 Replies
View Related
Aug 23, 2012
How is-it possible to do a recovery password for sysadmin on ADE-OS ?We're using LMS 4.2.1 and my customer doesn't remember the username and password created during installation.We have the admin user for the https connection.
View 4 Replies
View Related
Jun 24, 2011
I was changing the computer name on a group of networked computers but forgot to go to - Manage - Users - Administrator and set a password. I accessed Computer - System Properties - Clicked the "Change" button for "To rename this computer, click Change" and selected the "Workgroup" as opposed to the "Domain" option. When I restarted the computer the computer will not allow me to enter the administrator password to allow me access the computer.
View 2 Replies
View Related
Jul 14, 2011
I can add a ACS 5.1 to an Active Directory without using the administrator account, I have a domain administrator account by another name. I can use this account to include the ACS domain.
I have a account domain admin but when i try to add the ACS to AD have this message "can not resolve network address"
The DNS and network connectivity its OK
View 1 Replies
View Related
Aug 27, 2012
i forget the console admin password for acs 5.3 which is installed on vmware ,but am able to login through gui mode,so is it possible to change username and pwd for console administrator through gui.
View 1 Replies
View Related
Aug 19, 2012
Someone hacked into my computer through my Netgear router. They took over as Administrator and setup a Atheros (sp) driver. They pretty much have total control over my computer. How can I rid myself of this hack and protect nyself in the future?
View 5 Replies
View Related
Dec 16, 2011
I have been fighting with a wireless network hacker for months with no success. I have tried reloading Windows XP. but the reload contains things like Redhat and linux programs that do not even exist on my xp install disk. How can I find this wireless hacker and h9ow can I get rid of his control programs?
View 7 Replies
View Related
Oct 24, 2012
I am running v6.3.1172.4 of InterScan for Cisco CSC SSM. The previous administrator has left and I need to change the email address that email notifications go to. I click "Administration", then I click "Notification Settings" and type over the previous admin's email address.
When I click the "Save" button, I get:
The email address entered was not recognized. Verify the syntax and try again.
View 2 Replies
View Related
Apr 25, 2011
every time i go to my log in it ask for a pass word i did not make a pass word i have put in all kinds of pass words and got no where it will not even give me a hint i have went to safe mode it still ask for pass word . i have windows 7 how to rid the problem so that i can get around the administrator and remove it so that i can make another administrator account.
View 3 Replies
View Related
Apr 14, 2013
All I want to do is to share a couple of Folders, My Documents and Downloads, between two PC's on a Workgroup network.Networking is not my strongest point but up until now I have managed quite successfully.The setup is :-
1st PC is Mike-Laptoppc is on a Wireless connection to an ADSL+2 router/modem.
2nd PC is a Desktop Alexs-PC connected via cable to the same router/modem
I can share all the shared folders from the Desktop to the Laptop, but I can only share Media streaming on the Desktop from the Laptop, so I know there is a connection between the two computers. I have now turned off Media streaming to concentrate on just folder sharing.Whenever I try to access the Laptop from the Desktop I get an " Access Denied you do not have permission contact your administrator " box on the desktop.
View 6 Replies
View Related
Jun 30, 2011
I just just purchased a CSACSE-1113-K9 and I need to wipe the Administrator password. I am also not sure what the default login credentials even are. There doesn't seem to be much out there for this device or maybe I'm just looking in the wrong place?
View 13 Replies
View Related
Sep 27, 2012
I recently "uninstalled" DD-WRT from my router and tried to install the actual firmware for the router, so I went to this page [URL] WRT54G and select version 5. My router is really version 5.1 but I read on this forum that this router works with version 5 so I downloaded it and installed it.
However, this is how my admin page looks like,
And I can't do anything at all. Is there a fix for this? Is there an actual version 5.1 firmware? Or must I switch to a different, proper router?
View 8 Replies
View Related
Jun 18, 2012
I have a ASA5505 and it has a vpn set up. The VPN user connects using the Cisco VPN client. They can connect fine (the get an ip address from the ASA), but they can't ping the asa or any clients on the network. Here is the running config:
Result of the command: "show running-config"
: Saved
:
ASA Version 7.2(4)
!
hostname ASA
domain-name default.domain.invalid
[code].....
what I need to add to get the vpn client to be able to ping the router and clients?
View 3 Replies
View Related
