Wireless :: Network Log Off Current Users When New Clients Logs In?
Feb 19, 2012Whenever new clients logs on to the network, the network tends to kick out users already logged on to the network.
View 2 Replies
ADVERTISEMENT
Cisco :: NCS 1.1.0.58 Failing To Gather Current Clients From APs
Apr 24, 2012We're running NCS 1.1.0.58. Since updating to this release from the 1.0 release, the 'Autonomous AP Client Status' and 'Lightweight Client Status' background tasks have been failing with message 'java.lang.NullPointerException'. I believe as a result of this that the 'Current Clients' tab on an AP monitoring screen just reports 'No data available'.
View 2 Replies View RelatedCisco Firewall :: ASA 5540 - How Many AnyConnect Users Accommodated With Current Sessions
May 22, 2013I have a ASA 5540 VPN Premium with 2 Client-less licenses.How many anyconnect users can i accommodate with current sessions ??
View 5 Replies View RelatedCisco VPN :: 5520 - Incorrect TCP Session Logs For Remote VPN Users On ASA
Oct 29, 2012I have a problem on a Cisco ASA5520 version 8.2(5). A customer has set up a syslog to keep tracks of tcp sessions made by vpn users. On the syslog we filter %ASA-6-302013 and %ASA-6-302014 log messages, respectively: Built inbound TCP connection and Teardown TCP connection. When the connection is made by a vpn user, at the end of the log line you see the vpn username which should be the same in both the messages for the same connection. I have verified that when a user, let's say UserA, disconnects from the vpn, their tcp sessions are not properly closed; if another user, let's say UserB, establish a VPN immeditaely after and gets the same IP address previously assigned to UserA, the log sessions are recored with UserA in the %ASA-6-302013 message and UserB in the %ASA-6-302014 message. I presume this is due to the fact the tcp sessions are not tore down when the first user disconnects and it looks like a bug to me but I didn't find it referenced anywhere. Is there a way to have all tcp session tore down when a user disconnects the VPN connection?
View 2 Replies View RelatedCisco :: ACS 5.3 / View Real Time Logs For AAA Clients And For ACS Administrator?
Mar 6, 2012We have below queries regarding new version of ACS 5.3.
a) Is it possible to view real time logs for AAA clients and for ACS administrator?
b) Is it possible to track each and every change record for ACS Administrators and sessions in ACS . Ex addition and deletion of commands in command sets. As of now, we are able to see that config has changed by ACS admin but not able to see which commands are changed (Added or Removed)
c) As per user guide of ACS 5.3, we have an option for creating customized reports but unfortunately we are not able to see same option in ACS 5.3 GUI. Need confirmation on the same.
d) Is it possible to do configuration changes for ACS via Command line.
Cisco VPN :: ASA 5505 VPN Clients Can't Ping Router Or Other Clients On Network
Jun 18, 2012I have a ASA5505 and it has a vpn set up. The VPN user connects using the Cisco VPN client. They can connect fine (the get an ip address from the ASA), but they can't ping the asa or any clients on the network. Here is the running config:
Result of the command: "show running-config"
: Saved
:
ASA Version 7.2(4)
!
hostname ASA
domain-name default.domain.invalid
[code].....
what I need to add to get the vpn client to be able to ping the router and clients?
Add Two Laptops To Current Network?
Apr 21, 2011i have a wireless router on which my desktop with XP is connected to wirelessly. I want to add two laptops with windows 7 to the network what do I need to do?
View 1 Replies View RelatedView Current Network Security Key?
Apr 24, 2011my laptop is conneted to the internet everything works,is there a way to show what the 8 characters are?(win xp)......for instance with win 7 there is simply a box to check that says SHOW CHARACTERS
View 5 Replies View RelatedCisco Wireless :: WLC4402 / Aironet 1240 AG - Logs Are Rejected Due To Network Policy On NPS Server
May 10, 2012We are using WLC4402 for our Aironet 1240AG access points. The clients are connecting to the access points and are authenticating to the RADIUS server. I am seeing the logs in Server 2008 but they are being rejected due to Network Policy on the NPS server.
Where do I see the Authentication Type on the WLC4400 or the 1240's? In order for the clients (authenticated via Active Directory user) I have to set the Authentication in the NPS Connection Request Policy to "Allow clients to connect without negotiating an authentication method".
I do not have a certificate on the server and my method options are MS-CHAP-v2, MS-CHAP, CHAP, PAP, SPAP, and allow without negotiating. This RADIUS server was moved from Server 2003 IAS to Server 2008 NPS and there were no issues in Server 2003 IAS. I have all authentication methods allowed and it still gives me the error below. Only when I check "Allow clients to connect without negotiating an authentication method" it allows the authentication to proceed.
Client Machine:
Security ID: NULL SID Account Name: Fully Qualified Account Name: OS-Version:
Called Station Identifier: 00-17-a2-87-54-00: SSID NAME
Calling Station Identifier: 00-41-96-b6-e3-27
NAS:
NAS IPv4 Address: 192.168.90.24
NAS IPv6 Address: -
[code]...
Reason: The user attempted to use an authentication method that is not enabled on the matching network policy.
How To Find Current Logged On User In Domain Network
Aug 22, 2011how to find the current logged on user on a domain network? I tried nbtscan but it gives me ip address, machine name and mac address. In the server column it gives <server> and in the user name column it give <unknown>.
View 1 Replies View RelatedSetting Up New Network Whilst Keeping Current One Running?
Apr 22, 2013As part of my course, I have to install a brand new network, including cabling, setting up equipment etc in a room whilst ensuring that the current network system for that room is still running without any issue. How to do this as it includes taking out/changing the infrastructure in relation to cabling?
View 5 Replies View RelatedAllow Current Router To Access The Wifi And Use It For Home Network?
Aug 4, 2011Currently I have a small home network. Two desktops are connected to the router, which is wire-connected to the Time Warner modem. The desktops share folders, and there is a shared printer. Our laptop also accesses the network wirelessly. Yes, the network has a password.
We are students, and our school is installing free wi-fi in our building. I am only too happy to drop Time Warner. How can I maintain my current file sharing and printer sharing functionality without sharing with the entire WiFi network? Is there some way to allow my current router to access the WiFi and still use it for my home network?
Routers / Switches :: Dlink DIR 615 Router - Wireless Clients Can't See Ethernet Clients
Feb 1, 2011I have 4 desktops cat5 to Dlink DIR 615 router. All work fine. Any wireless clients, laptop or netbooks, see the desktop computers for a while then disconnect somehow. All machines can see the Internet through the router at all times. The desktops disappear from the laptop/netbooks but the wireless machines can be seen from the desktop computers but clicking on them gets 'Access Denied' message after a wait.3 desktops = XP, 1 98SE. All laptop/netbooks = XP
View 2 Replies View RelatedBuilding A Wireless Network For 130+ Users?
Apr 8, 2011designing a wireless network for an apartment complex. The complex is shaped like like an rectangle, fairly small, maybe 100 feet on the ends and 300 feet long on the sides. There are 130 people that we are assuming may have about 3 devices each that they will connect to the wireless network, potentially simultaneously, as this is in a college environment. We have plenty of bandwidth and down/up speed. We are running 30 megabit down and 10 up. I am planning on having a router with two access points centrally located in an apartment and extending the network out with antennas in each direction from the access points with Omni directional antennas. The Access points that I am planning on using are Cisco WAP200 with maybe a Linksys router, as the router should not have more than 10 connections on it. I need something that will not crash after 10-15 users connect to it because it jams up from overload.
View 3 Replies View RelatedHome Network :: Windows 7 Ip Change Logs
Apr 8, 2012Are there any logs maintained in Windows 7 when someone changes his/her ip..I mean if I was previously at 192.168.62.111 and then I change to 192.168.62.110 would it get logged somewhere in my PC??How can I view it??And finally how can I destroy that log or stop this logging feature...
View 1 Replies View RelatedWireless Network For Multiple Clients
Feb 8, 2012On every floor there are 10 rooms which can have multiple clients (laptops, ipads, smart phones) so let's say 50 clients.how to set up whole thing so the users in every room have decent speed for surfing and watching videos online
[code]...
Office Wireless Network Setup - 50 Users?
Nov 1, 2012I presently have a fiber internet connection to my office with about 40 wireless users on a single AP. The connection keeps dropping. Probably due to too many users on a single AP?
1. My question is similar to aniketchitale's, can get another wireless router, create a different SSID (eg. router1 and router2), but both wireless routers still connected to the same fiber connection. In other words, I would like to segregate the first 20 users to router 1 and the next 20 users to router 2.
2. By having 2 wireless routers each with their unique SSID, will all the users still be able to access to the same printer in the office?
Linksys Wireless Router :: WRT54GL Can't See Other Users On Network
Mar 2, 2013With my old netgear router I could see and share files on my kitchen PC from the office PC but with the WRT54GL I can't.
I have a printer with a static IP that both PC's can see.
Cisco Wireless :: WLC 5508 - Get Clients Connecting On Network 192.168.3.0/24?
Aug 6, 2012question in regards to the deployment of a new WLC and new LAPs,I have configured and connected a 5508 WLC and 3500 series LAP.LAG is enabled in the WLC and successfully connected to the neighboring switch (using etherchannel) and to the network.
The port-channel port is set to trunk mode obviously and certain vlan ids are currently allowed (3-5)
The management interface has this IP address 192.168.5.250/24
I created a WLAN with WLAN ID 3, Interface set to Management and say SSID test1
I have connected a new LAP to the network, which switchport interface is set to access mode and assigned with vlan id 3. The LAP is able to join the WLC successfully with an IP address, such as, 192.168.3.100 (assigned via DHCP).
When I try connecting a mobile client to the wireless LAN, it can successfully detect and connect to the WLAN, created in the WLC (test1) however it gets an IP address by DHCP, in the 192.168.5.0/24 network, which is the IP range of the management interface's IP address.
What can I do to get the clients connecting on network 192.168.3.0/24? I thought this would be the case since I allocated the WLAN Id of 3 in the WLAN test1 configuration and since the LAP switchport is set to access mode with vlan ID 3.
Linksys Wireless Router :: WAT54G - Map Which Shows All Users On Network
Sep 17, 2011I purchased my WAT54G a couple of years ago when I added a laptop, I have my desktop which is connected to DSL and a wireless printer and my laptop.A neighbor told me that I should secure my network as he has used it when his system went down. My son had added a P/W when we first set up the router.I have since found the NETWORK MAP on which shows all the users on the network and half my street is on there.I have again added a P/W how do I know if its SECURE?
View 2 Replies View RelatedLinksys Wireless Router :: WRT320N Privacy From Other Network Computer Users?
Jun 14, 2012I am grudgingly forced to allow certain people to use my wireless router connection. I just found out that these users are able to see a display of all the devices and computers attached to the router and network. This isn't a priviledge I'd like them to have. I'd like them to only be allowed to surf the internet - and leave it at that. I use WEP with a 26 digit code and each user has been given the code.)
View 5 Replies View RelatedLinksys Wireless Router :: WRT54g - WLAN Clients / Guest Network?
Feb 8, 2012I have a wrt54g router and would like to separate the WLAN clients from accessing computers and servers on the LAN... in other words I would like to make it a "guest" network. I've put the router in "router" mode instead of "gateway". I just want to be sure if that is the best thing I can do in terms of turning the wireless network into an isolated one.
View 4 Replies View RelatedCisco Wireless :: 5508 WLC - Clients Unable To Connect To WPA2 AES Network
Jun 12, 2012I have a 5508 WLC and 40+ LAP1142N APs spread across 19 locations that allows staff to connect to our private network via wireless. I recently deployed about 40 new laptops all identical make and model HP ProBook 4530's and all have the same client setup for the wireless. Out of those 40 laptops I have 4 that will not connect to the private network. However, these same laptops will connect to my public, open wireless network without issue. In addition to the 4 that will not connect all the others will prompt twice for network authentication.Now, I have about 10 other laptops that are not the HP model and all connect without issue and without dual propt. I don't think this is a wireless network issue but could be some type of issue with this model of laptop.
View 8 Replies View RelatedLinksys Wireless Router :: Managing Bandwidth / Users On Home Network With E2000
Aug 13, 2012I've got the E2000 at home for our private network.
We are three guys sharing a flat. We have personal laptops, work laptops, mobile phones, games consoles, tablets etc that connect to the internet.
Problem is that when someone downloads stuff, the speed is slow for the rest of us. So i was hoping i could set up something like three "channels" so each of us could have the same download speed, ie 1 mbs each regardless if others are using the network at the same time. And then maybe a guest network for all the mobiles and tablets etc. MAC filtering for access for our personal laptops should work.
We have a 20mbit cable network line.
Can i do all of this on the E2000 and how?
Cisco Wireless :: Current IOS For 1260 AP?
Jun 12, 2012What is the most current version oF IOS for the following Wireless AP(Aironet 1260)
Product/Model Number: AIR-AP1261N-E-K9
System Software Filename: ap3g1-k9w7-tar.124
Linksys Wireless Router :: E4200v1 Get A List Of DHCP Clients On Guest Network
Jul 3, 2012I've got an E4200v1 running 1.0.04 firmware with guest access enabled. I'd like to find out who is logged in using the guest access. Is there a way to get a list of the DHCP clients on the guest network? I'm able to do this for the non-guest access via the WEB interface's Status->Local Network->DHCP Clients Table page. But I can't find a similar table for the guest network.
View 3 Replies View RelatedCisco Wireless :: 5500 Ideal Timeout For Users When No Activity Performed While Connected To Network
Jun 15, 2012what is the ideal timeout for users when no activity is performed while connected to network via wireless
-WLC model 5500
-AP model 1200 series
users get disconnected every 15mins when machine is Ideal and where do i see this option.
Wireless :: Add Second Mifi 2200 To Current Contract?
Mar 11, 2011I would like to add a second mifi 2200 to my current contract. (Same phone # & same bill.) That way I can use the second one while I'm on the road & my wife can use the first one at home!
View 2 Replies View RelatedCisco Wireless :: ACS V5.3 Change Current To New Password?
Sep 15, 2012i have acs v5.3 and i need change current to new password
View 4 Replies View RelatedLinksys Wireless Router :: EA4500 - Current Password Not Matching
Jul 2, 2012My router password is "55xxxxx"
But when I want to change the router password in CCC, it warns me "Current password is not match"
Linksys Wireless Router :: Access Restrictions On Current E2500?
May 28, 2012I have an old WRT54G and the access restrictions really don't work. it's sloppy and ineffective.
i'm thinking about upgrading... perhaps to the E2500. Do the access restrictions now work properly? Am I able to allow access to a specific site only during certain times?
For instance, am I able to provide access to [URL] only during 6:00pm-9:00pm and block it otherwise?
Linksys Wireless Router :: WRT54GL V1.1 How To Get A Backup Of Current Version
Mar 7, 2012I have a WRT54GL v1.1 that has firmware version 4.30.14 build 5 installed(according to the device). The latest version listed on your website is 4.30.13. What does this mean? How do I get a backup of my current version?The device seems to be working fine and the manual I downloaded seems to cover it. I'm on a Mac so I have to set it up manually.
View 1 Replies View RelatedCisco Wireless :: WLC2504 - Controllers Loses Current Time
Jan 22, 2013Every time I power down my WLC2504 controller and then back up, the time reverts back to the year 2000.The APs can't join the controller, due to certificate errors, until I reset the clock. This problem just started recently.
View 6 Replies View Related