As part of my course, I have to install a brand new network, including cabling, setting up equipment etc in a room whilst ensuring that the current network system for that room is still running without any issue. How to do this as it includes taking out/changing the infrastructure in relation to cabling?
View 5 RepliesI have a Cisco 877W-K9 router, and I for the life of me can not work out how to enable multiple SSIDs on the AP whilst keeping them all to the same VLAN?
I know this may seem silly but basically for our clients we setup WPA-Enterprise for one SSID and WPA-PSK for the other to help ease migration between the two etc, however all I can seem to do at the moment is create multiple VLANs and use ip unnumbered vlan1 to sync them all into one, but this seems really silly.
we have a pix 515E firewall with software version Cisco PIX Security Appliance Software Version 7.0(4) and ASDM version Device Manager Version 5.0(4). we are in a process of upgrading the software. Kindly suggest the software and ASDM version most fit for the device. Also the software should be compatilbe for the current configuation running.
View 3 Replies View RelatedI am thinking of setting up Wake-Up-LAN on my current desktop. The only problem is that I am using a wireless router, and it would be impossible for me to connect it with a cable. Would it be possible for me to use a wireless router? If not, would it be possible for me to use another router, connect it wirelessly to the original router, and connect that one with my desktop?
View 1 Replies View RelatedI am building a new computer to replace my existing one. is there a way to transfer my existing network to the new computer when I install the routers software? I don't want to redo all the devices that are connect wirelessly that are using it for internet connection.
View 1 Replies View RelatedNow that I've got the console cable working due to a USB adapter, I can access the router fine and the Cisco CP and Hyperterminal software both work fine, however if I try and configure the router via the Cisco CP > Setup a new device... menu option, once I press 'next' on the screen which asks for an IP, subnet, user/pass, it eventually comes up with this error:
readTillMatch: Timeout, max timeout=60000 ms, last device response=[]?
I have manually reset it once already via Hyperterminal and tried again but that still persists in producing that error once I configure it via the Cisco CP software.
EDIT: Manually configuring it via hyperterminal using the commands given by the device wizard worked instead, and then saving and reloading. However, despite getting the LAN lights to come on now (on the router) and my computer to acknowledge a connection, I can't get it to obtain an IP, nor can I get it to discover the router on 192.168.1.1 if I specify the IP manually for my network connection, using gateway as 192.168.1.1 and my computer's IP as 192.168.1.15 for example.
i have a wireless router on which my desktop with XP is connected to wirelessly. I want to add two laptops with windows 7 to the network what do I need to do?
View 1 Replies View RelatedApparently the setup cd does not work with Mac OS Lion. Anyone else out there is using this router on a Mac running Lion...if so, how did you set up the router.
View 3 Replies View RelatedI have allways configured and run LDAP Server Groups authenticating to Active Directory Domain Controllers using LDAP, never an issue, until I hit a Domain Controller running on a Windows Server 2008. I have been unable to authenticate with the common setting with an ASA5510 running 8.0.1.
View 4 Replies View Relatedmy laptop is conneted to the internet everything works,is there a way to show what the 8 characters are?(win xp)......for instance with win 7 there is simply a box to check that says SHOW CHARACTERS
View 5 Replies View RelatedWhenever new clients logs on to the network, the network tends to kick out users already logged on to the network.
View 2 Replies View Relatedhow to find the current logged on user on a domain network? I tried nbtscan but it gives me ip address, machine name and mac address. In the server column it gives <server> and in the user name column it give <unknown>.
View 1 Replies View RelatedCurrently I have a small home network. Two desktops are connected to the router, which is wire-connected to the Time Warner modem. The desktops share folders, and there is a shared printer. Our laptop also accesses the network wirelessly. Yes, the network has a password.
We are students, and our school is installing free wi-fi in our building. I am only too happy to drop Time Warner. How can I maintain my current file sharing and printer sharing functionality without sharing with the entire WiFi network? Is there some way to allow my current router to access the WiFi and still use it for my home network?
I would like to connect devices to my network so that their traffic passes through a proxy running on my computer. I figured the best way to do this is by setting the proxy on my router to the one I am running, but then I would need to have another connection to the computer running the proxy or else there would be an infinite loop ?? something like that. so:
Internet -> router (1) -> my proxy on comp A -> router (2) -> computer B
I run a minecraft server over an ad hoc network, but every time we start the server up again, we have to find the new IP address, edit the server files, and re-enter the new IP address onto all the computers.Is there a way to make it so an Ad Hoc always boots with the same Ip Address?
View 2 Replies View RelatedI have multiple devices running on my home network. Every once in a while my wireless router starts playing up and I have to reset it.Whenever this happens, it changes the internal IP addresses of the devices. Is there a way to make the router keep the same internal ip address for each device? ie Laptop stays at 192.168.1.8I have a few forwarded ports for remote access to certain pieces of software, so each time the address changes, I have to go in and change these details, which is quite frustrating.
View 7 Replies View RelatedI have a wireless repeater (NETGEAR Universal Wifi Range Extender WN2000RPT) thats been giving me issues lately when attempting to use it to connect an xbox 360 I have to xbox live. The Xbox and the repeater are connected by an ethernet cable so there is no wireless connection going on between them. My router (Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN) located in the basement of my house, and the extender is on the second floor of my house. The xbox that I want to connect to the internet is located on this second floor and because of the distance between it and my router a normal xbox wireless networking adapter doesn't seem to be working.Anyway, if I plug in the extender and let it get a connection, and use it right away to connect, i have no issues. The connection will also usually remain working for a while after I first get it working. The problem comes after I'm done using the xbox and i shut off the console and the tv. When I come back to the xbox later and turn it on, the networking extender still shows it has a full connection and is working properly on the outside with the green lights, but the xbox will not connect and it will tell me the extender is not assigning an IP automatically (DHCP turned off), when I know for a fact it is turned on. It is almost like the extender freezes after I leave it alone and on for a while. When this happens I usually unplug it and let it connect, and everything works as it should again. After a while its gotten a little annoying having to do this every time I need connection.
View 5 Replies View RelatedKeep a log of my own (Wan) IP-adress. It should look up my own IP-address and write it away to a log, so that I can look up a few weeks or months later what my IP-adress was on a certain day. I am using a router at home.
View 6 Replies View RelatedI would like to know if it is possible to add a second router to my home network.
My son wants to use his Nintendo DS online but the device does not have WEP capability, it can only deal with the less secure WPA option.
I am not willing to drop my preferred WEP just to facilitate one device, but I do have a spare router and I am wondering if it were possible to hook the second router up and allow him to connect using WPA?
I have two dir655 routers that are connected. The second router is not setup as a wireless access point, but I am open to that if it will work. The second one is going to serve as a public wifi in a business, with a separate SSID. The first one is going to handle the local business network, with its NAS and printers. How would I prevent the public wifi from accessing the first router?
I have tried the guest wifi partition setting, however it still allows access to the lan devices on the first router. It does partition with the second router properly though, but thats not worth anything to me cause there are no lan devices on the 2nd router.
Would it work right if I turn the 2nd router into a access point, disable the dhcp server, and set it up with the guest wifi partition?
ASR performs the function of ISG. The number of subscribers until 10000. This number is constantly growing.Because of the economic address space subscribers surf the Internet through NAT.Now the task to keep logs of all translations or binds. Need to store the information about what time, certain internal IP address using the external IP.
View 19 Replies View RelatedI am installing a network that has two SG500X-24 switches as core and several SG300-52 switches as access switches. I've seen in the SG500X-24 datasheet that there is a True Stacking feature. But in the data sheet there are not a lot of details about it. My doubt is the following. If I configure the two SG500X-24 switches as a single switch through stacking them, can I connect one SG300-52 switch to these two SG500X-24 switches through two cables (both configured as a LAG in the SG300-52 and in the SG500X-24 stack, one cable per SG500X-24), the the first cable connected to the first SG500X-24 switch and the second cable connected to the second SG500X-24 switch and keep both connections active?
View 3 Replies View Relatedit's across 3 floors and the current setup is a single wireless router DIR655 (1st floor), but the WiFi suffers greatly on the floor below/above.
I have sourced 3x D link switches and 2x more DIR655's and would like to have all machines/consoles/phones etc in the household on the same network. Is it possible to keep one DIR655 as the main wireless connection and have the other as pure AP's as well as keeping the same SSID?
I have been testing WiFi devices such as the iPhones and iPads connectivity with the following setup:
1. 3502i AP
2. WLC 5508 SW 7.0.98
3. NGS
The i-devices have iOS v4.2
My goal is to have the guest user i-devices maintain the credentials (username and password) when they login again to the wireless network. Like if the device sleep, I think definitely they would loose those IP address issued by the DHCP. Once the guest user uses them again and connect them to the wireless network the user would not need to type-in those credentials on the Web Authentication page directed by the WLC.
The credentials are issued by the sponsor who created them on the NGS. It seems that there are WiFi problems with these i-devices. But somehow, I'm looking for a solution that would automated the logins like a checkbox if you want to be kept signed in, on Yahoo or Stay signed in for GMail.
Have a WLC 5508 running 6.x code with LAP's providing wireless for our internal laptops (WPA2 and EAP-TLS). I want to provide guest wireless which goes out a different port on the WLC to a guest firewall/cable modem. However, we want to prevent our internal laptops from being able to use the guest wireless. I have RADIUS (IAS) and LDAP for my AD available. We would prefer not to have use Lobby Ambassador and just have the guests use a simple password or web passthru. Guests may be laptops or smartphones. What options are available? I have tried a test setup using dynamic vlan assignments from RADIUS using the IETF flags, but can't seem to get it to work. Is there a way to identify the SSID is being used at the RADIUS server?
View 13 Replies View RelatedHaving problems with my wireless router, dropping and keeping connection active. For some odd reason I keep dropping connection either wireless or wired. I have a total of 5 items going through this router. 2 of them are wireless and the other 3 are wired. The wireless items are a desktop computer that is using the Wireless USB adapter to get online. Sometimes it drops and most of the time it doesn’t have any problems. I have a laptop that sometimes the connection goes from strong all the way down to no connection at ALL. It starts at 54MBPS to down to the RED X over the wireless manager. Forgot to mention both of these machines are Windows XP. If I reboot the laptop, it comes up without any problems.
Sometimes I tell Windows XP to manage the Wireless connection and tell it to disconnect and re-connect again, it goes. Now for the wired items, I have 2 gaming systems and another computer plugged directly up to the router. For some odd reason when I double click on the internet, on the computer that is hooked directly to the router, it says page couldn’t be found. I know that there is connection and there is nothing running in the task tray except for the Anti-Virus and Firewall. The browsers that I am using are Internet Explorer 8 and Mozilla Firefox 3.0.10. Also checked on the back of the machine to see if I have link lights and everything is flashing. Finally, when I click the homepage or refresh button about 2 or 3 times, it goes through.
think that I am overloading this Router and it can’t handle it. I might have to look into sending "Keep Alive" packet setting on the router.
We have a Linksys E1200 modem and I have been having problems with keeping my son from using the wireless interenet. I did change the password and that worked for about 24 hours and then he was able to get onto it again. He has a nintendo dsi and he is smart enough to figure out how to dismantle any parental controls on his gaming device. I think that he resets the modem in order to get back onto the internet in order to use his gaming device. Someone told me that you can register each item individually in order to keep kids from using it but I have no idea as to how this works. We have two iphones, a lap top, and two tablets.
View 7 Replies View RelatedI have 30 switched in my corporate network it’s all up and running all switches running by default configuration and connected to WS-C4506 core switch our dhcp server pooling 192.168.100.1/27 network. Now we need to configure new Vlan for finance department this department has more than 200 users. If my server distributes 192.168.200.0 range ip can vlan2 automatically assign ip 200.0 addresses to finance department.All switches running default config no ip address assigned.
View 9 Replies View RelatedI need to replace an existing ASA 5540 with a new ASA 5525X. I would like to pre-stage and configure the new box with the existing config, migrate license and export certificate files before swapping it with the old one during a change window. The new firewall will run 9.1 on deployment. Now the same 7.2(4) cannot just be copied over to 5525X running the minimum 8.6 version. There is a Web based tool available at [URL] according to Cisco documentation but the page does not load for me (Cisco intranet only tool ?). Is there another tool for automatic conversion ?
View 3 Replies View RelatedI'm using a wireless router which will not browse unless i disable LAN. How can I have the LAN connected and Wi-fi router connected at the same time?
View 3 Replies View RelatedI have installed anti virus but it can't run. Is there any administrator rights.
View 1 Replies View RelatedI have windows 7.
View 2 Replies View RelatedAll network icons missing after running, spybot.In device manager/advanced - wirelss remains off, even after selecting 'wireless on' after selecting wirless on, and closing box, when I open the advance settings, wireless is off again
View 1 Replies View Related