Someone hacked into my computer through my Netgear router. They took over as Administrator and setup a Atheros (sp) driver. They pretty much have total control over my computer. How can I rid myself of this hack and protect nyself in the future?
View 5 Replies
every time i go to my log in it ask for a pass word i did not make a pass word i have put in all kinds of pass words and got no where it will not even give me a hint i have went to safe mode it still ask for pass word . i have windows 7 how to rid the problem so that i can get around the administrator and remove it so that i can make another administrator account.
View 3 Replies View RelatedTrying to connect two systems together but was giving error that contact network administrator,one system is laptop with wireless and other is desktop but connect through cable but running windows XPSamson
View 1 Replies View Relatedi have distributed my internet through lan by router .but i think that, that user whom i have gave my net is forwarding to other users too through hub.
View 1 Replies View RelatedI currently have 1 cat 5 jack at my tv/entertainment area and will be needing additional jacks to add gaming consoles,streaming video player and internet ready tv at the same location.The current jack installed at that location is coming from a D-Link 8 port Gigabit switch installed in a different room.The switch is at capacity,all ports are full,so no additional availability there.My question is how to expand port availability at the entertainment area.Is it possible to put another switch or hub at that connection?Would there be a conflict with cascading a switch from one to another? I have a 25 meg fiber optic incoming service,so there is plenty of speed and bandwith available to handle these componets.
View 1 Replies View RelatedAlthough our usage policy clearly states NO PORN, i'm still catching users watching porn. I'm to the point where i'm going to start shunning mac addresses. Before I do that I would like to first send them a message, like Net Send used to do, warning them to stop.
View 2 Replies View RelatedWe have successfully establish a site-to-site vpn, but we have some difficulties when PPTP users try to access the remote network linked by this tunnel. LAN users can access the remote network without problem, but users who are connected remotly to the lan (PPTP) can't access computer on the remote network. Is there a way to allow PPTP user to access the remote network ? Adding a route ?
View 1 Replies View Relatedhow can I remote in to my router and I need to get past my router to my pc desktop
View 2 Replies View RelatedI am trying to connect to my office PCs via VPN and/or RDP. The office uses Qwest DSL and has a dynamic IP address. I use DynDNS.org to keep the DNS updated with the WAN address of the router. However, any attempt to access the network fails. I have tried remote management access (I enabled it on the router) but that fails. I forwarded RDP ports on the router to one of the PCs but can't connect to it. I also set up a VPN server but cannot connect to it either. Something tells me that all requests to myoffice.homeip.net are not getting to my modem/router. I have even tried the IP associated with the name (Yes, I did check that it is correct!) but nothing works there either.
View 1 Replies View Relatedi have a slow internet but my friend who live canada have high speed internet can use his internet . i do not want use his remote his computer but internet
View 5 Replies View RelatedI have two locations in the same city and I want to connect them together so I can share files and printers. Each of the LANs has a router and is a simple workgroup. LAN A uses 192.168.1.1 255.255.255.0; LAN B is 192.168.2.1 255.255.255.0. What is the best way to connect these two networks together so I can share printers on both sides? Should I replace the network routers, they are older and definitely could use an upgrade
View 3 Replies View RelatedMy boss is asking me to write a batch file or use a utility to monitor the uptime of 16 different ISP accounts that we use across several stores. Most stores have several ISP accounts setup as failover, so they're not always active on our network but the ISP should still be up. He would like this to run from one of our servers. He is suggesting the 'gateway' for the ISP however I am not sure how to find this IP. The tracert utility returns IP addresses which are different than the gateway address in our router settings so I am wary to use those IPs.Which IPs would I ping to monitor the uptime and where would be the best place to find them?
View 2 Replies View Relatedi provide 192.168.1.201 and port No.8150 in CP Plus DVR . I am able to login through Local system via IE with [URL] after pressing enter key Login window appears. I will type User ID as Admin and password 888888. now i am able to enter DVR and view all cameras. no problemin Beetal ADSL router ( ISP Router) i configured port forwarding as followsIP address 192.168.1.201 and Port No. 8150 both internal & external.Now i got internet IP address through MY IP Address.the IP address is 59.92.67.72 ISPs IP address for my Borad Band.through another internet with different different ISPI open IE and type [URL] got same loging window as in LANagain I enter User Id as Admin and password 888888but shows login failed Message through internet I got the same login window when i tried through LAN, but I am to unable login with a message login failed
View 1 Replies View RelatedI have a Cisco 678 connected to my ISP (Qwest) using DHCP. This is connected to a Linksys WRT54g router. I also have a home server running for remote access to some files and media streaming. I just installed security cameras that I wish to monitor remotely via the internet.I can access my home files over the internet with no issue. However I am unable to access my cameras using the internet. Looking at my router incoming log, I see my request arriving, but I never get to the DVR attached to the camereas for remote viewing.I enabled bridging on the Cisco 678 but this did not solve the issue.
View 1 Replies View RelatedI am trying to Port Forward HTTP: 80, but my Router wont let me and it keep giving me this error message Status: Port Range Overlap with Remote Management.I have a NETGEAR CG814GCMR Router, I need to add that port for setting up a Game private server online, but my router wont let me, how to fix it?
View 12 Replies View RelatedHow do I setup remote login that would allow 3 or 4 people to login to the same computer.Each person would have their own Windows User Account name, with different privileges.I don't know what software could do this. The computer being connected to would be Windows 7, and there is no special network equipment besides a consumer router.
View 11 Replies View RelatedEach person would have their own Windows User Account name, with differentprivileges.I don't know what software could do this.The computer being connected to would be Windows 7, and there is no special network equipment besides a consumer router.This is a very small business and keeping costs under control is important
View 9 Replies View RelatedI want to share the My Documents folder from an XP machine with ONLY one user (the administrator) on a networked Win 7 machine. I have turned off simple sharing on the XP machine. I hate XP!! So complicated to do anything. Anyway, under security, I have tried share this folder, and not to share folder. I have gone into Advanced and messed around with permissions, taking out Everyone, using Admin only, using Network. At one point I ended up not being able to access My Documents on the local computer and had to jump through many hoops to change ownership and disable read only so that the user could use her own files!The problem is, under Advanced in the permissions area, I cannot see the users on the remote pc to choose which one should be allowed access. how to actually find a particular user on the Win 7 pc and give ONLY that user permission to read (not to change) the files in My Documents on the XP pc.
View 3 Replies View RelatedHow do I setup remote login that would allow 3 or 4 people to login to the same computer. Each person would have their own Windows User Account name, with different privileges.I don't know what software could do this. The computer being connected to would be Windows 7, and there is no special network equipment besides a consumer router.his is a very small business and keeping costs under control is important.
View 6 Replies View RelatedI have a client that wants to segment their wireless network behind their ASA. We currently have a normal setup, 5510, 2 interfaces, outside, inside. On the inside network there are Cisco Wireless APs that allow for internal access to the network. We want to move the APs to a new interface on the ASA and only allow traffic bettwen this new "Wireless" network and the internal network by using remote user VPN. So my question is, can you use remote user VPN from the new Wireless network to the inside network??
View 1 Replies View RelatedI am currently trying to decide on the best remote support software to purchase for a 50+ workstation business. I have experimented with Real VNC and TeamViewer, and whilst they are quite comparable I noticed that TeamViewer has a feature called "Seamless Windows" I will be providing remote support to local users, and several interstate branches - therefore the software that I decide on must accommodate a wide diversity of geographical locations.I was also looking at a product called GoverLAN, but it seems to me that GoverLAN only works on a single LAN and can't be used over a WAN in a similar way to both RealVNC & TeamViewer?
View 4 Replies View Relatedip local pool VPNPOOL 192.168.200.1-192.168.200.100.
i can access servers with remote vpn which they located at dmz zone at asa(write nonat access-lsit) but i can not 192.168.193.0 subnet at asa.i configurated proxy server. my proxy server inside interface get ip address my dmz zone(172.16.10.254) and outside is ip adddress asa outside interface (10.0.0.254).the users (192.168.193.0/24) go internet from proxy server.
[code]....
It seemed that show vpn-sessiondb ra-ikev1-ipsec will not provide the client type of the remote vpn user as show vpn-sessiondb remote did before.
Is there a way to find it out on ASA running 8.3?
At first I use ACS 4.2 to create static ip address user for remote access VPN,It's easy,just configuration it at user set>Client IP Address Assignment>Assign static IP address,but when I use ACS 5.2 I can't find it.I try to add IPv4 address attribute to user by read "ACS 5.2 user guide" ,it says this: [code] I do this,but it's not work.When I use EasyVPN client to connect ASA 5520,user could through authentication but will not get that static IP address which I configuration on Internal Users.so,what should I do,if anyboby knows how to use ACS 5.2 to create a static ip address user for remote access VPN.
View 2 Replies View RelatedI have a 3845 router (12.4(13r)T10) with ZBF. On my LAN there is a user who need to access a remote IPSEC VPN server. He is able to get the tunnel but afterwards he cannot connect to any service in the remote LAN. As I'm using zbf I think that I should inspect traffic from my LAN zone to EXT zone, There is a document that describe a solution to this? What IP adressess should I use?
View 2 Replies View RelatedI have a 3845 router (12.4(13r)T10) with ZBF. On my LAN there is a user who need to access a remote IPSEC VPN server. He is able to get the tunnel but afterwards he cannot connect to any service in the remote LAN. As I'm using zbf I think that I should inspect traffic from my LAN zone to EXT zone
View 3 Replies View RelatedOur customer has an ASA5520 Security appliance, I have already config the remote vpn in asa , user can logon via internet by vpn client and can access internal network,customer hope us can make some configuration if the remote user logon asa by vpn and notify them someone login their vpn by email .
View 2 Replies View RelatedI need to configure our ASA5505 firewall for remote access to our network using EasyVPN software installed on a laptop. That laptop will be connected in the different places, using DSL or 3G toggle or Public Wi-Fi. For some people it's very easy, but I don't have any experience with firewalls.
View 9 Replies View Relatedhow many remote user connect using Cisco VPN client on Cisco Firewall ASA5520-BUN-K9? Already i read VPN Client FAQ But their have no information about user limitation.
View 1 Replies View RelatedI've just installed NCS. When trying to configure NCS for ACS Tacacs+ authentication, I receive the message below when trying to login to NCS. ACS records my login in the 'passed authentications' log. I am using ACS 4.2."No authorization information found for Remote Authenticated User. Please check the correctness of the associated task(s) and Virtual Domain(s) in the remote server". I used the following link to configure ACS for NCS, url...
View 3 Replies View RelatedI would like to create a additional user vpn on a 55010 where the user authenticates with the firewall and not the radius server.This user should NOT be able to log on to the firewall, but only be able to authenticates with the vpn client.I'm correct that the command "username abc123 password abc234 privilege 0" ?Also for this remote vpn how to I make sure the user only authencates with this password?
View 3 Replies View RelatedAt first I use ACS 4.2 to create static ip address user for remote access VPN,It's easy,just configuration it at user set>Client IP Address Assignment>Assign static IP address,but when I use ACS 5.2 I dont't know how to do it.
I try to add IPv4 address attribute to user by read "ACS 5.2 user guide" ,it says this:
Step 1Add a static IP attribute to internal user attribute dictionary:
Step 2Select System Administration > Configuration > Dictionaries > Identity > Internal Users.
Step 3Click Create.
Step 4Add static IP attribute.
Step 5Select Users and Identity Stores > Internal Identity Stores > Users.
Step 6Click Create.
Step 7Edit the static IP attribute of the user.
I just do it,but it's not work.When I use EasyVPN client to connect ASA 5520,user could success to authentication but will not get the static IP address which I configure on Internal Users,so the tunnel set up failed.I try to Configure a IP pool on ASA for ACS users get IP address,and use EasyVPN client to connect ASA , everything is OK,user authenticate successed.but when I kill IP pool coufigurations and use the "add a static IP address to user "configurations,EzVPN are failed. how to use ACS 5.2 to create a static ip address user for remote access VPN?
802.1x is working properly, 802.1x port is up,but;when I do a remote desktop to machine that is 802.1x authenticated by an user(Wired), first, login to pc successfuly then(3 minutes) is switch port down..
Debug radius authentication
Debug aaa authentication
Does not appear in the log only message port is down
Equipment;
Cisco 2960, Cisco ACS 4.2 ,MS Active Directory Authentication
Client:windows xp, windows 7
Cisco 2960 Port Config
switchport mode access
dot1x pae authenticator
dot1x port-control auto
spanning-tree portfast
spanning-tree guard loop
