every time i go to my log in it ask for a pass word i did not make a pass word i have put in all kinds of pass words and got no where it will not even give me a hint i have went to safe mode it still ask for pass word . i have windows 7 how to rid the problem so that i can get around the administrator and remove it so that i can make another administrator account.
View 3 RepliesSomeone hacked into my computer through my Netgear router. They took over as Administrator and setup a Atheros (sp) driver. They pretty much have total control over my computer. How can I rid myself of this hack and protect nyself in the future?
View 5 Replies View RelatedTrying to connect two systems together but was giving error that contact network administrator,one system is laptop with wireless and other is desktop but connect through cable but running windows XPSamson
View 1 Replies View RelatedI was changing the computer name on a group of networked computers but forgot to go to - Manage - Users - Administrator and set a password. I accessed Computer - System Properties - Clicked the "Change" button for "To rename this computer, click Change" and selected the "Workgroup" as opposed to the "Domain" option. When I restarted the computer the computer will not allow me to enter the administrator password to allow me access the computer.
View 2 Replies View RelatedCant log in to my router I've tried 192.168.1.1, 192.168.0.1, (url )Don't know what else I can try keeps poping up with search results. Oh, also tried reseting router and cable modem.
View 5 Replies View RelatedI try to login to my router http://192.168.1.1/ I try and put in the user name and password that I think it is. Is it the user name and password you set up or one that's already there and if so where can I find it??
View 6 Replies View Relatedi provide 192.168.1.201 and port No.8150 in CP Plus DVR . I am able to login through Local system via IE with [URL] after pressing enter key Login window appears. I will type User ID as Admin and password 888888. now i am able to enter DVR and view all cameras. no problemin Beetal ADSL router ( ISP Router) i configured port forwarding as followsIP address 192.168.1.201 and Port No. 8150 both internal & external.Now i got internet IP address through MY IP Address.the IP address is 59.92.67.72 ISPs IP address for my Borad Band.through another internet with different different ISPI open IE and type [URL] got same loging window as in LANagain I enter User Id as Admin and password 888888but shows login failed Message through internet I got the same login window when i tried through LAN, but I am to unable login with a message login failed
View 1 Replies View RelatedI have a windows 7 and can connect to my router but my windows xp laptop wont connect to the same router i took it back to the shop and they connected it to there wifi. so what can be the problem.
View 2 Replies View RelatedHow to implement ipv6 on windows 7
View 1 Replies View Relatedwe're using a network and only one computer can't seem to connect to the printer. it runs on a windows 7. tried reinstalling it but it seems nothing has changed same error messages is coming up each time i tried to setup the printer.
View 1 Replies View Relatedmy computer has windows 98 and when i connect it to my router it can not connect to the internet! what do i need to do?
View 1 Replies View RelatedI cannot connect to the Internet. I have a d-link router/modem combination DSL-2640B that was working on my old XP pc that died. My new laptop is a 64-bit Windows 7 machine that cannot see my router. I can connect to the Internet using my iPad. When I enter http://192.168.1.1, I get an error on EI 9 that says Internet Explorer cannot display the web page. Ipconfig returns an auto configuration address of 169.254.46.231 I cannot ping the router. I can't figure out how to get into my router to reset it. I have unplugged everything, flushed DNS, and restarted with no difference. I can't cut and paste because I cannot get to the Internet from my Laptop.
View 9 Replies View RelatedIn win 7, I do not find a terminal emulation program, how can i connect to CLI of Cisco 300 series switch through its console.
View 2 Replies View Relatedwindows seven changes my ip address after sitting idol for awhile. I have to reboot and reset my modum the computer is brand new
View 1 Replies View RelatedI've set up a DHCP reservation on a Netgear wpn824v3 router, using its "Attached Devices" list to specify the MAC address of a computer on the network to use IP 192.168.5.200. After using "ipconfig /release" then "ipconfig /renew" on the client PC, though, the client PC keeps going back to the address it got automatically, i.e., 192.168.5.3.How can I force the client to use 192.168.5.200?
View 1 Replies View RelatedHow can I turn my PC / Laptop running Windows XP into a wireless router so that I can use the internet in it through wifi enabled devices?
View 3 Replies View RelatedSeagate GoFlex Home External Hardrive.does not download drives x y z
View 1 Replies View RelatedI have a WN3000RP WiFi Range Extender but I cannot seem to find out how to connect to it on my Windows 7 Desktop computer to configure it. My Router is a Netgear Wireless G RouterWGR614 v9
View 7 Replies View Related{10.46.0.254/32 is advertised on R1 (AS 65457)} ••>AS (3549) -->AS (4058) ---->AS (17776) ••>R2 (local AS 65458) ••>R3 (local AS 65457) ••>AS 65000 ••>{ R4 (AS 65457) advertises 100.9.254.0/24}
Scenario 1:
R2 and R3 are eBGP peers on LAN..
R1#show ip bgp neighbors 10.117.36.89 adv
BGP table version is 72, local router ID is 10.46.0.254
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal,
r RIB-failure, S Stale, m multipath, b backup-path, x best-externa
[Code]...
We have a Cisco SF 300-08 here at work that cannot be used. The system lights are green and flashing. I looked into the manual and pressed the reset button for more than 10 seconds for a factory reset. The port lights lit up momentarily and then goes out. I used Putty and Tera Term with no luck. The screen is just blank; there's no boot up process.
View 2 Replies View RelatedI would like to override the DNS servers provided by DHCP via my ISP. The other settings I would like to preserve (like my assigned IP).How to achieve this with E3000 ?
View 3 Replies View RelatedRecently we've been receiving the following log entries on our WLC 4402. Unfortunately Cisco's documentation is less than useful as to what this message means or what could be causing it. [code]
View 9 Replies View RelatedI configured a new SG-200-08 with a static IP. I tried to save the configuration as the startup configuration. After 10 minutes, I restarted the switch. It didn't boot with the new configuration, and returned to the default .254 and default pw. Now I cannnot assign a new pw or get past the change the pw page. When I try to save a new pw, the switch reboots and prompts me to change from the default pw. I tried resetting the switch by depressing the reset button for a long time, but results are the same. LED indicators are green with a flashing green indicating the .254 address and a solid green on the port where the switch is connected to the computer. How can I reset the switch or get passed the change your pw page?
View 3 Replies View RelatedI've an ASA 5505, running at ASA 8.2(2). I'm using ASDM 6.2(5).ASA is set up with Split Tunneling and it works perfectly.However, for a few users, I want all traffic, including Internet traffic, routed through the ASA.The spesific users IP address at internet should then be the same as ASA Outside address, not the client local address.The question is therefore:How to simple override the split tunneling at user level?Alternatively set up an "tunnel all" group policy for the specified users?
View 19 Replies View RelatedI have successfully implemented wireless guest access using 4402 WLC as the Anchor and 5508 as Foreign. The Anchor controller also provides dhcp services to guest clients. The 5508 is LAGged and there is no issue with the guests traffic separated from corporate. At a remote site, there is a 4402 WLC using LAG and also acting as a Foreign controller. But when a client connects to the guest WLAN, it obtains a corporate dhcp address instead of the dhcp address assigned from the Anchor controller. The guest WLAN setting is the same as with the 5508 controller i.e. DHCP server override is ticked and the management IP address of the Anchor controller is specfied. Also DHCP Addr required is ticked. Why the 4400 controller is not forwarding dhcp requests to the anchor controller and instead sending to the corporate dhcp server.
View 36 Replies View RelatedWLC 5508: software version 7.0.98.0
Windows 7 Client
Radius Server: Fedora Core 13 / Freeradius with LDAP storage backend
I have followed the guide at URL with respective to building the LDAP and free radius server. 802.1x authorization and authenication correctly work. The session keys are returned from the radius server and the wlc send the appropriate information for the client to generate the WEP key.
However, the WLC does not override the VLAN assignment, even though I was to believe I set everything up correctly. From the packet capture, you can see that verfication of client is authorized to use the WLAN returns the needed attributes:
AVP: l=4 t=Tunnel-Private-Group-Id(81): 10
AVP: l=6 t=Tunnel-Medium-Type(65): IEEE-802(6)
AVP: l=6 t=Tunnel-Type(64): VLAN(13)
We have a three tier network with a centralized core switch and multitple distirbution swithces - all 6506 routers.EAch dist switch is its own PIM SM domain and the RP so we never send multicast between the dist switches and through the core.
We are putting in a centralized server at the core switch which has to provide specific mcast < X Groups > to all servers at the dist level on all dist switches.
So we would like to define the RP <core rp ip> just for the <X groups> on the Core switch and tell all the distribution switch that the core is the RP for just the <XGroups>
If we put these commands on all the switches including the cores will that set the rp just fo the <XGroups> to the <core rp ip > ?Do I have to define the deine an ACL for all groups if i define it for some or will groups not defined by the ACL defualt to the local RP?
do I have to put in the override command ? (We are using MSDP not autorp)
ip pim rp-address <distn rp ip>
ip pim rp-address <core rp ip> 99
ip access-list 99
permit <XGroups > mask
how can we login into the private network from Remotely in Switches and firewall or Routers,
View 5 Replies View RelatedI work from a remote location, and use a VPN to access files on the company server. I have no problem logging into the VPN, but when using Windows 7 64-bit, I am denied access to the specific folder containing the files I need, even though I can see and open other folders on the same server.
However, if I connect from an old laptop running Windows 2000, I get a login pop-up when I click on the desired folder and after entering my username (including the remote domain name) and password I can access the files. In the newer OS, I just get a stock "access denied" message, with no option to log in. Specifically, in W7 the message is "You do not have permission to access this folder", which is nonsense.
Our IT department is baffled. How to set up W7 so it will allow me to log into the protected folder in the same way I can do it in W2K? Once logged in to the VPN itself, I use the 'run' command with the remote IP address to bring up the folders in a normal Explorer window.
I want to limit the concurrent login my users can have. I have downloaded and installed Limit Login from Microsoft and followed the directions to a T. However, when users login it doesn't do anything. The scripts don't run (I have them listed in the logon and logoff scripts for users in the default domain policy). The scripts are stored in a share that everyone has read access to. What am I doing wrong? I have installed and uninstalled a million times following the MS directions included with the software to the letter, but it won't work. At one time I had it working and then we had some network problems with profiles and it got messed up in that process. Now I'm trying to get it back, but can't. Even uninstalling and reinstalling.
View 2 Replies View RelatedI recently upgraded several of my systems to Windows 8 from XP. This, of course, included the update to IE10.Now, I cannot log into the router on my network via a Windows 8 system. It works fine if I use a Windows 7 laptop or an XP unit, but on Windows 8, when I go to the router's address, it prompts me for the Username and Password. It takes the password, and then immediately comes back and asks for it again. Another weirdness is that it won't exit when I choose cancel - only if I select the red X in the upper right corner of the authentication window.
View 5 Replies View RelatedAfter finishing all of my projects here at work, I decided to finally take a look at a sf300-08 that was left by my predecessor. I almost got into it once via browser but the UI crashed. So I downloaded the manual and proceeded to connect to the switch via rs-232. When I get to the log in screen I cant type anything in and when I try hypterterminal crashes.
View 5 Replies View Relatedi have a SG300-28 switch here but I do not have the password to login the device. From the startup config of the switch, I see the login password is encrypted. Are there anyway for me to access the device without reset it?
View 2 Replies View Related