I configured a new SG-200-08 with a static IP. I tried to save the configuration as the startup configuration. After 10 minutes, I restarted the switch. It didn't boot with the new configuration, and returned to the default .254 and default pw. Now I cannnot assign a new pw or get past the change the pw page. When I try to save a new pw, the switch reboots and prompts me to change from the default pw. I tried resetting the switch by depressing the reset button for a long time, but results are the same. LED indicators are green with a flashing green indicating the .254 address and a solid green on the port where the switch is connected to the computer. How can I reset the switch or get passed the change your pw page?
I try to login to my router http://192.168.1.1/ I try and put in the user name and password that I think it is. Is it the user name and password you set up or one that's already there and if so where can I find it??
We have a Cisco SF 300-08 here at work that cannot be used. The system lights are green and flashing. I looked into the manual and pressed the reset button for more than 10 seconds for a factory reset. The port lights lit up momentarily and then goes out. I used Putty and Tera Term with no luck. The screen is just blank; there's no boot up process.
i recently upgraded our Ciscoworks LMS from 4.0 to 4.1. after i installed the upgrade the admin login doesnt work, neither does any other account. i have tried resetting the password but it doesnt work.
We are unable to login at Cisco 6509 switch, due to username and password not working. We have tried to recover the password as per Cisco document, but that is also not working. This switch is our Primary Switch in our network.
I have not worked with ASDM in a while. I have a 5510, with asdm-645.bin in the flash. The device runs version 8.4(2). I can download ASDM from the http interface of the firewall from the management interface. But I can not log in. I have used blank username and password, no username and enable password, blank username with enable password and a few other permutations. I then tried to connect to the asdm interface from inside also. But I can not connect. Needless to say, I have enabled http, and updated the http access-list. The only logging I have enabled is buffered. Is there any configuration that I am missing? Shall I cut and past the config?
I have a WLC 3750 and use the web authentication method with the internal login-page. Now I would like to add a link to a PDF document which is supposed to be available before logging in. In other words: Clients connect to the W-LAN and get access to the login-page. They can download the PDF document (which has by the way a size of ca 10MB) from the login-page and after that they login to get access to the internet.
As far as I understood the manuals I won't be able to use the internal login-page because the size of a file is not allowed to be bigger than 1MB.So I thought about using the external authentication by using the webserver of my website. Unfortaunely the IP-Adress of my website doesn't work. Behind this IP-adress there's more than one website hosted. So I can't use my webserver either ...
Is there any other possibilty to add this PDF (size 10MB) on the login-page? Maybe I can add my website to a kind of a "pass through list" which is accessible even without authentication?
I am having two dc switches with FWSM modules installed. DC switch1 FWSM (Ver 3.2(12) is wokring as active and Secondary DC switch2 FWSM (ver 3.2.(12) is in standby mode.
From yesterday I am trying to login primary FWSM, It is accepting my username and credentials but prompting again for username please refer below
DXB-DC1>session slot 5 p 1The default escape character is Ctrl-^, then x.You can also type 'exit' at the remote prompt to end the sessionTrying 127.0.0.51 Open. [code]
I recently upgraded several of my systems to Windows 8 from XP. This, of course, included the update to IE10.Now, I cannot log into the router on my network via a Windows 8 system. It works fine if I use a Windows 7 laptop or an XP unit, but on Windows 8, when I go to the router's address, it prompts me for the Username and Password. It takes the password, and then immediately comes back and asks for it again. Another weirdness is that it won't exit when I choose cancel - only if I select the red X in the upper right corner of the authentication window.
The computer that i am using which is on the LAN Setup. Also it is connected to the domain. Whenever i tried to log on to the computer it is giving me an error message that "The System could not log on the "Domain Name" either the connection is disconnected or the domain is no longer available" somting like that. When i remove the LAN Cable and if i enter the domain password, i can login to the computer. after i log on the computer if i connect the LAN Cable it is working fine. I can access the other computer which is connected to the same domain. Why the error message is poping up?
I am unable to login to switch c3560 through Hostname but able to login through IP address. when i am putting the command : login authentication telnetpwd
getting the below message:
AAA: Warning authentication list "telnetpwd" is not defined for LOGIN.
Just installed a new WRVS4400N router. wireless working. however refuses to let me log back via Ethernet cable in at URL given me 403 Forbidden, Access Denies, Management via WLAN is not allowed. Was able to reset and noe braodcasting unsecured "cisco b" signal, but no way to get into router and set up security. unsure what I have done.
I'm unable to login Switch.......getting following error...I have tried this commands on other 3560 that worked...when I enter user name & password re logging authentication failed error occurs .........This is remote site Switch.
When i tried to login through ASDM at Cisco ASA 5510, it ask for the username and password and after that nothing comes up. I am able to login through ssh. [code]
As per my knowledge show bootvar and show version, should shows the same IOS version. But here it's showing different. Is asdm-523 is compatible with IOS asa708.
We have a site where uses are unable to login to an application. After running a packet trace on the traffic coming from the site to the server they are trying to access, the trace indentifies that the client pc is sending a window size of zero to the server, and it does this twice. So in essence the client is saying it is too busy. This is strange as all the other applications work for the users and it is only this one application that is experiencing issues. The only other issue is that there is some retransmitted traffic before the client sends window size.
I can not access my hotmail account through msn.com, nor can I login to msn messenger as before. I get error message as follows:The requested URL /login.srf was not found on this server.Apache/2.0.59 (Unix) DAV/2 PHP/4.4.5 Server at [URL]Port 80
when I try to connect to a network where is required a login in the first webpage I cannot have internet access, but only local access.I mean: even for free internet connection, sometimes they require you to connect to their network, then open the browser that is automatically direct to their network login page in order to login in that page.my problem is that I am able to connect to the network but when i open any browser, it does not direct me to the login webpage; it tries to go to my homepage but, obviously, the computer is not still connected to internet, so on the browser it appear "Atheros AR5B91 Wireless Network Adapter".
Basically all I want to do is login to my routers config page so that I can forward ports. I was able to this a few weeks ago but recently I have received this error. Failed to connect
Things that I have already tried:
- Tries using 192.168.0.1, 192.168.1.1, http://192.168.1.1 and all kind of variations.
- Tried with different browsers.
- Tried with seperate computer with different OS's (Mac and PC)
- Unable to flush dns because I get this error: CMD prompt error message .
I just moved and have a new laptop, Comcast came in to reset the cable and internet. A new router was given to us and I cannot seem to access the password. I reset the router and now where to go nest since I try using the IP address and it is not recognizing it. I am using an unsecured WIFI access and I am not comfortable doing so.
changed the router wan access pwd and now trying to test the dap i can't seem to log in with the default ip / dlinkap url access i have tried the bridge and ap switch setting on the dap with no luck after resetting the dap a couple of times with no luck ..
After finishing all of my projects here at work, I decided to finally take a look at a sf300-08 that was left by my predecessor. I almost got into it once via browser but the UI crashed. So I downloaded the manual and proceeded to connect to the switch via rs-232. When I get to the log in screen I cant type anything in and when I try hypterterminal crashes.
i have a SG300-28 switch here but I do not have the password to login the device. From the startup config of the switch, I see the login password is encrypted. Are there anyway for me to access the device without reset it?
We just upgraded our Sg300 series switches to the new IOS so we can get CLI access. The upgrade went fine but it seems we have two login prompts, the first being completely unnecessary as you can just hit return to get by it. IE here is the progression:
1. Connect SSH
2. Receive a "login:" prompt. Anything can be entered here, including just return
3. Login banner is displayed
4. Username Prompt is then displayed. Valid username required
I am trying to get rid of that first login prompt (IE Step 2) as it is causing issues with our configuration software. I have tried every line and authentication command I can think of, the only thing that gets rid of it is using none authentication which obviously we can't stay with. how did you get around it?
We have two 6500 switches and I am unable to login to these switches anymore, but i was able to connect to them yesterday via Telnet. The strange part is that it happened for both switches at the same time.But now when i try to login, it gives me a message "password required, but none set". I can login to them via console.Is it because the 0 - 4 VTY connection are being used and there is no password set from VTY 5 to 15?The config has not changed.
SWITCH-1 line con 0 exec-timeout 0 0 password xxxxx login line vty 0 4
The switch functions and operates fine but I can no longer login to the webview(GUI) and when I use a serial cable to console in to it, it shows nothing on the hyperterminal meaning no login. How can I get back into the switch to manage it or reset it back to factory settings? I kept the default IP address and I enabled HTTPS to login by gui, well I got in by HTTPS so I went in to turn that setting off and hit apply and now I can't log into it at all.
I configured the below config in Routers it is working good , but when i do the same in SWITCH-2960 , i am getting a problem not able to login to enable mode ... i am getting the basic login only ....
Error msg : % Error in Authentication.
Need to be configured at TAFE Network Devices: Code...
Cant log in to my router I've tried 192.168.1.1, 192.168.0.1, (url )Don't know what else I can try keeps poping up with search results. Oh, also tried reseting router and cable modem.
I am unable to login to my router ? I have tried to reset my router and am still unable to login to the online control panel. The steps that I went about resetting the router were pushing the reset button for 30 seconds. That did not work so I pushed the reset button for 30 seconds, unplugged the router while continuing to hold the reset button for 30 seconds, plugged the router back in while holding the reset for 30 seconds.
Region : Canada Model : TL-WR700N Hardware Version : V1 Firmware Version : ISP : ShawCable
I have just bought the device. I works fine as a AP out of the box. I want to use it as a repeater of my wireless network which uses a Linksys Simultaneous Dual Band N Router WRT400N
1. To do the setup, I have tried to login at 192.168.0.254 I cannot do this (a) using a wireless connection to a Linksys router which is connected to the cable modem and (b) wired connection to the router which is connected to the cable modem. The attempts get a timeout messaage.
2. The default gateway is 192.168.1.1. The DHCP server has the same address. My computer is using 192.168.1.101.
I have configured 3355 NAC appliances in HA pair everything is running fine.But not able to Login through GUI (Virtual IP) which is used during the configuration of HA pair.
