Unable To Login To Belkin F7d2301 Router
Mar 23, 2011i cant login to my belkin f7d2301 v1 router tried fac reset
View 1 Replies
ADVERTISEMENT
Belkin F7D2301 Router / Unable To Access This Particular Site?
Feb 4, 2013I have a Belkin F7D2301 v1 (01) and I am having the exact same issue. I like to do surveys and I've never been able to access this particular site It does the same thing as the original person's problem. I'm kind of scared to change anything on my router setup because I have several computers on the same router. Will any of this cause the other computers not to run on the router?
View 2 Replies View RelatedBelkin F7D2301 V1 Router Suddenly Turns Off
Oct 30, 2012I have this problem yesterday when I was surfing the internet when suddenly my belkin router turns off. This router is working just fine in the beginning when we have this. When I troubleshoot, it says about the ethernet cable. When I plug it to the ethernet slot on the back of my computer, it would not flash an orange light. Am I required to buy another ethernet cable or it's just my router who had just lost power?
View 5 Replies View RelatedCannot Access The Startup Menu - Belkin F7D2301 Router?
Jan 22, 2011I have a belkin f7d2301 and I cannot access the startup menu it says startup not found I have remove program and reinstalled it. is the disc bad. i also cannot do auto updates because it can't find startup location.
View 2 Replies View RelatedBelkin Routers :: Wireless Speed Drop Down For F7D2301 V1?
Nov 29, 2012Hardwired into the modem speeds are great...wireless speeds drop down to half.
View 1 Replies View RelatedBelkin N150 F9k1001V4 - Cannot Login To The Router Page?
Jul 12, 2012I have just bought a Belkin n150 router. Connected it to my modem and PC and I'm recieving internet. Connected my phone and laptop and getting wireless.The issue, however, is that I cannot login to the router page. The login says to leave blank for default, but it gives me an incorrect password error. I have tried resetting using the button located above the power cable to go back to defaults, but I continue to recieve the error.
I have tried a all the other usual default passwords, password, administrator, admin, etc.I've gone through pages of google search results and found nothing. Have I missed something obvious or did Walmart sell me a defective router?
Unable To Login Into Router Config Page
Feb 4, 2013Basically all I want to do is login to my routers config page so that I can forward ports. I was able to this a few weeks ago but recently I have received this error. Failed to connect
Things that I have already tried:
- Tries using 192.168.0.1, 192.168.1.1, http://192.168.1.1 and all kind of variations.
- Tried with different browsers.
- Tried with seperate computer with different OS's (Mac and PC)
- Unable to flush dns because I get this error: CMD prompt error message .
- Have factory reset router a few times now.
- Unplugged, left off for 20mins-2hours.
Unable To Login Into Router To Setup Wifi
Apr 2, 2012I just moved and have a new laptop, Comcast came in to reset the cable and internet. A new router was given to us and I cannot seem to access the password. I reset the router and now where to go nest since I try using the IP address and it is not recognizing it. I am using an unsecured WIFI access and I am not comfortable doing so.
View 1 Replies View RelatedRouters / Switches :: Unable To Login To Asus Router?
Jul 31, 2011I try to login to my router http://192.168.1.1/ I try and put in the user name and password that I think it is. Is it the user name and password you set up or one that's already there and if so where can I find it??
View 6 Replies View RelatedLinksys Wireless Router :: Unable To Login To WRT54G?
Jan 21, 2013I am unable to login to my router ? I have tried to reset my router and am still unable to login to the online control panel. The steps that I went about resetting the router were pushing the reset button for 30 seconds. That did not work so I pushed the reset button for 30 seconds, unplugged the router while continuing to hold the reset button for 30 seconds, plugged the router back in while holding the reset for 30 seconds.
View 6 Replies View RelatedCisco Routers :: WRVS4400N Router Unable To Login
Aug 9, 2012Just installed a new WRVS4400N router. wireless working. however refuses to let me log back via Ethernet cable in at URL given me 403 Forbidden, Access Denies, Management via WLAN is not allowed. Was able to reset and noe braodcasting unsecured "cisco b" signal, but no way to get into router and set up security. unsure what I have done.
View 1 Replies View RelatedLinksys Wireless Router :: WRT610n Unable To Login Config Page Via HTTPS
Jul 13, 2012I'm having wrt610n and there is an issue, i can login to the config page via http, but using the same computer i'm not able to login there via https but the same time i can login via ipad and the other computer, using the https.i even tried to reset the router settings, but the result was the same, so what PC option can cause it?
View 6 Replies View RelatedCisco Switching/Routing :: Unable To Login Through Console Port On 1941 Router
Mar 12, 2012I have a strange issue that I am having an issue figuring out. I am trying to login to the 1941 router through the console port. When I enter the username and password, which I just set, it fails. I am able to login under a different login but when I try to enter the enable mode the enable password doesn't work, which I just set as well. I can login with the TACACS+ login from a SSH session. Here is the line config:
line con 0
exec-timeout 15 0
logging synchronous
[Code].....
Belkin Routers :: F5D8233-4 How To Login And Block Particular IP Addresses
Feb 8, 2013I am wondering how I log into the router and block particular IP addresses to include especially Facebook. I have a N Wireless Router F5D8233-4. Is there a way to figure out a site IP address if you open up there website.
View 3 Replies View RelatedWireless Belkin Router - Unable To Connect With It?
May 30, 2011I have just purchased and successfully installed a wireless Belking router and although my pc connects perfectly my daughter cannot connect to the same router even with the correct security codes, what are we doing wrong
View 1 Replies View RelatedBelkin F5D8236-4 - Unable To Ping Router
Sep 6, 2011O.S - Windows Vista
Router - Belkin F5D8236-4
When I check with PFPortChecker, it says "We were not able to ping your router" I have done everything correctly, or maybe I thought I have. I have try 69.165.255.1 a default gateway but it just goes to Unidentified Network and I can't access the Internet
Linksys Wireless Router :: WRT120N - Can't Accept Login Credentials When Login From IE10 Browser
May 9, 2013We have a Linksys WRT120N wireless router set up at one of our small offices. I noticed recently when trying to log in to the router to make some admin configurations that it will not accept the login credentials when trying to log in from IE10 browser. Works fine from Chrome, IE9, ect. logging in to a linksys router with IE10?
View 3 Replies View RelatedBelkin N750 DB Wireless Router - Unable To Setup
Nov 4, 2012So i got time warner cable and internet but for some odd reason a "wired" connection works perfectly fine but i cannot get any life out of my belkin n750 DB wireless router. ive hooked it all up modem to router to pc nothing so i reset everything still nothing
View 3 Replies View RelatedUnable To Login Into Switch?
Dec 3, 2011if we are unable to login into switch how can we identify at which port of switch loop is there ?
View 3 Replies View RelatedWindows 8 And IE 10 - Unable To Use Linksys Login?
Jan 28, 2013I recently upgraded several of my systems to Windows 8 from XP. This, of course, included the update to IE10.Now, I cannot log into the router on my network via a Windows 8 system. It works fine if I use a Windows 7 laptop or an XP unit, but on Windows 8, when I go to the router's address, it prompts me for the Username and Password. It takes the password, and then immediately comes back and asks for it again. Another weirdness is that it won't exit when I choose cancel - only if I select the red X in the upper right corner of the authentication window.
View 5 Replies View RelatedLAN Setup - Unable To Login To Computer
Feb 2, 2012The computer that i am using which is on the LAN Setup. Also it is connected to the domain. Whenever i tried to log on to the computer it is giving me an error message that "The System could not log on the "Domain Name" either the connection is disconnected or the domain is no longer available" somting like that. When i remove the LAN Cable and if i enter the domain password, i can login to the computer. after i log on the computer if i connect the LAN Cable it is working fine. I can access the other computer which is connected to the same domain. Why the error message is poping up?
View 4 Replies View RelatedCisco :: Unable To Login After Upgrading To LMS 4.1
Dec 5, 2011i recently upgraded our Ciscoworks LMS from 4.0 to 4.1. after i installed the upgrade the admin login doesnt work, neither does any other account. i have tried resetting the password but it doesnt work.
View 3 Replies View RelatedCisco Switches :: Unable To Login On SG-200-08
Apr 10, 2012I configured a new SG-200-08 with a static IP. I tried to save the configuration as the startup configuration. After 10 minutes, I restarted the switch. It didn't boot with the new configuration, and returned to the default .254 and default pw. Now I cannnot assign a new pw or get past the change the pw page. When I try to save a new pw, the switch reboots and prompts me to change from the default pw. I tried resetting the switch by depressing the reset button for a long time, but results are the same. LED indicators are green with a flashing green indicating the .254 address and a solid green on the port where the switch is connected to the computer. How can I reset the switch or get passed the change your pw page?
View 3 Replies View RelatedTCP Window Size - Unable To Login To Application
Dec 11, 2011We have a site where uses are unable to login to an application. After running a packet trace on the traffic coming from the site to the server they are trying to access, the trace indentifies that the client pc is sending a window size of zero to the server, and it does this twice. So in essence the client is saying it is too busy. This is strange as all the other applications work for the users and it is only this one application that is experiencing issues. The only other issue is that there is some retransmitted traffic before the client sends window size.
View 2 Replies View RelatedServers :: Unable To Login To Hotmail Account?
Sep 3, 2011I can not access my hotmail account through msn.com, nor can I login to msn messenger as before. I get error message as follows:The requested URL /login.srf was not found on this server.Apache/2.0.59 (Unix) DAV/2 PHP/4.4.5 Server at [URL]Port 80
View 1 Replies View RelatedUnable To Get Network Connection When Login Is Required?
Jun 15, 2011when I try to connect to a network where is required a login in the first webpage I cannot have internet access, but only local access.I mean: even for free internet connection, sometimes they require you to connect to their network, then open the browser that is automatically direct to their network login page in order to login in that page.my problem is that I am able to connect to the network but when i open any browser, it does not direct me to the login webpage; it tries to go to my homepage but, obviously, the computer is not still connected to internet, so on the browser it appear "Atheros AR5B91 Wireless Network Adapter".
View 5 Replies View RelatedD-Link DAP-1522 :: Unable To Login With Default IP?
Jan 5, 2012changed the router wan access pwd and now trying to test the dap i can't seem to log in with the default ip / dlinkap url access i have tried the bridge and ap switch setting on the dap with no luck after resetting the dap a couple of times with no luck ..
View 8 Replies View RelatedCisco WAN :: Unable To Login At 6509 Switch
Jul 4, 2011We are unable to login at Cisco 6509 switch, due to username and password not working. We have tried to recover the password as per Cisco document, but that is also not working. This switch is our Primary Switch in our network.
View 8 Replies View RelatedCisco Firewall :: 5510 - Unable To Login
Aug 23, 2011I have not worked with ASDM in a while. I have a 5510, with asdm-645.bin in the flash. The device runs version 8.4(2). I can download ASDM from the http interface of the firewall from the management interface. But I can not log in. I have used blank username and password, no username and enable password, blank username with enable password and a few other permutations. I then tried to connect to the asdm interface from inside also. But I can not connect. Needless to say, I have enabled http, and updated the http access-list. The only logging I have enabled is buffered. Is there any configuration that I am missing? Shall I cut and past the config?
View 4 Replies View RelatedCisco WAN :: Unable To Use WLC 3750G Login-Page?
Jan 22, 2012I have a WLC 3750 and use the web authentication method with the internal login-page. Now I would like to add a link to a PDF document which is supposed to be available before logging in. In other words: Clients connect to the W-LAN and get access to the login-page. They can download the PDF document (which has by the way a size of ca 10MB) from the login-page and after that they login to get access to the internet.
As far as I understood the manuals I won't be able to use the internal login-page because the size of a file is not allowed to be bigger than 1MB.So I thought about using the external authentication by using the webserver of my website. Unfortaunely the IP-Adress of my website doesn't work. Behind this IP-adress there's more than one website hosted. So I can't use my webserver either ...
Is there any other possibilty to add this PDF (size 10MB) on the login-page? Maybe I can add my website to a kind of a "pass through list" which is accessible even without authentication?
Cisco Firewall :: Unable To Login In FWSM 3.2
Apr 13, 2011I am having two dc switches with FWSM modules installed. DC switch1 FWSM (Ver 3.2(12) is wokring as active and Secondary DC switch2 FWSM (ver 3.2.(12) is in standby mode.
From yesterday I am trying to login primary FWSM, It is accepting my username and credentials but prompting again for username please refer below
DXB-DC1>session slot 5 p 1The default escape character is Ctrl-^, then x.You can also type 'exit' at the remote prompt to end the sessionTrying 127.0.0.51 Open. [code]
TP-Link 150Mbps Wireless :: TL-WR700N - Unable To Login At 192.168.0.254
Dec 29, 2012Region : Canada
Model : TL-WR700N
Hardware Version : V1
Firmware Version :
ISP : ShawCable
I have just bought the device. I works fine as a AP out of the box. I want to use it as a repeater of my wireless network which uses a Linksys Simultaneous Dual Band N Router WRT400N
1. To do the setup, I have tried to login at 192.168.0.254 I cannot do this (a) using a wireless connection to a Linksys router which is connected to the cable modem and (b) wired connection to the router which is connected to the cable modem. The attempts get a timeout messaage.
2. The default gateway is 192.168.1.1. The DHCP server has the same address. My computer is using 192.168.1.101.
3. I use McAfee Internet Security software.
Cisco Infrastructure :: C3560 - Unable To Login Through Hostname
Jul 4, 2012I am unable to login to switch c3560 through Hostname but able to login through IP address. when i am putting the command : login authentication telnetpwd
getting the below message:
AAA: Warning authentication list "telnetpwd" is not defined for LOGIN.