Cisco WAN :: Unable To Login At 6509 Switch

Jul 4, 2011

We are unable to login at Cisco 6509 switch, due to username and password not working. We have tried to recover the password as per Cisco document, but that is also not working. This switch is our Primary Switch in our network.

View 8 Replies


Cisco :: Can't Login To 6509 Switch Through Telnet / SSH Or Relogin

Dec 29, 2011

I was logged in to this device in monday normally and in tuesday when i trying to

Cisco SW#telnet
Trying ...
% Connection refused by remote hos
And i compare the current configuration with last configuration in monday i found no change, this device in live network also cpu is normally and memory.

View 2 Replies View Related

Unable To Login Into Switch?

Dec 3, 2011

if we are unable to login into switch how can we identify at which port of switch loop is there ?

View 3 Replies View Related

Cisco AAA/Identity/Nac :: 3560 - Unable To Login Switch?

Jul 5, 2012

I'm unable to login Switch.......getting following error...I have tried this commands on other 3560 that worked...when I enter user name & password  re logging authentication failed error occurs .........This is remote site Switch.


View 7 Replies View Related

Cisco Switching/Routing :: 6509-E / VSS - Unable To Set Switch Number

Aug 28, 2012

I have a 6509-E chassis that was prevoius in a VSS configuration. Due to some VSL failures I had to cobvert it to a standalone chassis but would like to bring it back to a virtual system.

Whenever I try to convert it by using the command "switch convert mode virtual" I get the msg %Please configure local switch number first". After doing so by entering the CLI cmd "switch set switch_num 1 local" I still get the same message.

View 1 Replies View Related

Cisco Infrastructure :: 6509 Login To Backup SUP-720

Apr 17, 2011

how can i access the backup SUP from telnet/console while it's in the standby state?

View 3 Replies View Related

Cisco :: Unable To Login After Upgrading To LMS 4.1

Dec 5, 2011

i recently upgraded our Ciscoworks LMS from 4.0 to 4.1. after i installed the upgrade the admin login doesnt work, neither does any other account. i have tried resetting the password but it doesnt work.

View 3 Replies View Related

Cisco Switches :: Unable To Login On SG-200-08

Apr 10, 2012

I configured a new SG-200-08 with a static IP. I tried to save the configuration as the startup configuration. After 10 minutes, I restarted the switch. It didn't boot with the new configuration, and returned to the default .254 and default pw. Now I cannnot assign a new pw or get past the change the pw page. When I try to save a new pw, the switch reboots and prompts me to change from the default pw. I tried resetting the switch by depressing the reset button for a long time, but results are the same. LED indicators are green with a flashing green indicating the .254 address and a solid green on the port where the switch is connected to the computer. How can I reset the switch or get passed the change your pw page?

View 3 Replies View Related

Cisco :: 2960 / Login To Switch Via Ssh?

Aug 25, 2011

i have 2960 Catalyst with LANLITE. And i cannot set "transport input ssh", it allows only telnet. I'm wondering if cisco lanlite switches have ssh input in newer releases of IOS or there is no way to make ssh input on this switch?Here's show ver output (i removed all serial and part numbers):
S14#sh ver
Cisco IOS Software, C2960 Software (C2960-LANLITE-M), Version 12.2(37)EY, RELEASE SOFTWARE (fc2)
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Thu 28-Jun-07 18:07 by antonino
Image text-base: 0x00003000, data-base: 0x00D00000


View 2 Replies View Related

Cisco Firewall :: 5510 - Unable To Login

Aug 23, 2011

I have not worked with ASDM in a while. I have a 5510, with asdm-645.bin in the flash. The device runs version 8.4(2).  I can download ASDM from the http interface of the firewall from the management interface. But I can not log in. I have used blank username and password, no username and enable password, blank username with enable password and a few other permutations. I then tried to connect to the asdm interface from inside also. But I can not connect. Needless to say, I have enabled http, and updated the http access-list.  The only logging I have enabled is buffered. Is there any configuration that I am missing? Shall I cut and past the config?

View 4 Replies View Related

Cisco WAN :: Unable To Use WLC 3750G Login-Page?

Jan 22, 2012

I have a WLC 3750 and use the web authentication method with the internal login-page. Now I would like to add a link to a PDF document which is supposed to be available before logging in. In other words: Clients connect to the W-LAN and get access to the login-page. They can download the PDF document (which has by the way a size of ca 10MB) from the login-page and after that they login to get access to the internet.
As far as I understood the manuals I won't be able to use the internal login-page because the size of a file is not allowed to be bigger than 1MB.So I thought about using the external authentication by using the webserver of my website. Unfortaunely the IP-Adress of my website doesn't work. Behind this IP-adress there's more than one website hosted. So I can't use my webserver either ...
Is there any other possibilty to add this PDF (size 10MB) on the login-page? Maybe I can add my website to a kind of a "pass through list" which is accessible even without authentication?

View 11 Replies View Related

Cisco Firewall :: Unable To Login In FWSM 3.2

Apr 13, 2011

I  am having two dc switches with FWSM modules installed. DC switch1 FWSM  (Ver 3.2(12) is wokring as active and Secondary DC switch2 FWSM (ver  3.2.(12) is in standby mode.
From  yesterday I am trying to login primary FWSM, It is accepting my  username and credentials but prompting again for username please refer  below
DXB-DC1>session slot 5 p 1The default escape character is Ctrl-^, then x.You can also type 'exit' at the remote prompt to end the sessionTrying Open. [code]

View 1 Replies View Related

Windows 8 And IE 10 - Unable To Use Linksys Login?

Jan 28, 2013

I recently upgraded several of my systems to Windows 8 from XP. This, of course, included the update to IE10.Now, I cannot log into the router on my network via a Windows 8 system. It works fine if I use a Windows 7 laptop or an XP unit, but on Windows 8, when I go to the router's address, it prompts me for the Username and Password. It takes the password, and then immediately comes back and asks for it again. Another weirdness is that it won't exit when I choose cancel - only if I select the red X in the upper right corner of the authentication window.

View 5 Replies View Related

LAN Setup - Unable To Login To Computer

Feb 2, 2012

The computer that i am using which is on the LAN Setup. Also it is connected to the domain. Whenever i tried to log on to the computer it is giving me an error message that "The System could not log on the "Domain Name" either the connection is disconnected or the domain is no longer available" somting like that. When i remove the LAN Cable and if i enter the domain password, i can login to the computer. after i log on the computer if i connect the LAN Cable it is working fine. I can access the other computer which is connected to the same domain. Why the error message is poping up?

View 4 Replies View Related

Cisco Infrastructure :: C3560 - Unable To Login Through Hostname

Jul 4, 2012

I am unable to login to switch c3560 through Hostname but able to login through IP address. when i am putting the command : login authentication telnetpwd
getting the below message:
AAA: Warning authentication list "telnetpwd" is not defined for LOGIN.

View 5 Replies View Related

Cisco Routers :: WRVS4400N Router Unable To Login

Aug 9, 2012

Just installed a new WRVS4400N router.  wireless working.  however refuses to let me log back via Ethernet cable in at URL given me 403 Forbidden, Access Denies, Management via WLAN is not allowed.  Was able to reset and noe braodcasting unsecured "cisco b" signal, but no way to get into router and set up security.  unsure what I have done. 

View 1 Replies View Related

Cisco Firewall :: Unable To Login Through ASDM At ASA 5510

Jul 6, 2011

When i tried to login through ASDM at Cisco ASA 5510, it ask for the username and password and after that nothing comes up. I am able to login through ssh. [code]

As per my knowledge show bootvar and show version, should shows the same IOS version. But here it's showing different. Is asdm-523 is compatible with IOS asa708.

View 6 Replies View Related

TCP Window Size - Unable To Login To Application

Dec 11, 2011

We have a site where uses are unable to login to an application. After running a packet trace on the traffic coming from the site to the server they are trying to access, the trace indentifies that the client pc is sending a window size of zero to the server, and it does this twice. So in essence the client is saying it is too busy. This is strange as all the other applications work for the users and it is only this one application that is experiencing issues. The only other issue is that there is some retransmitted traffic before the client sends window size.

View 2 Replies View Related

Servers :: Unable To Login To Hotmail Account?

Sep 3, 2011

I can not access my hotmail account through, nor can I login to msn messenger as before. I get error message as follows:The requested URL /login.srf was not found on this server.Apache/2.0.59 (Unix) DAV/2 PHP/4.4.5 Server at [URL]Port 80

View 1 Replies View Related

Unable To Get Network Connection When Login Is Required?

Jun 15, 2011

when I try to connect to a network where is required a login in the first webpage I cannot have internet access, but only local access.I mean: even for free internet connection, sometimes they require you to connect to their network, then open the browser that is automatically direct to their network login page in order to login in that problem is that I am able to connect to the network but when i open any browser, it does not direct me to the login webpage; it tries to go to my homepage but, obviously, the computer is not still connected to internet, so on the browser it appear "Atheros AR5B91 Wireless Network Adapter".

View 5 Replies View Related

Unable To Login Into Router Config Page

Feb 4, 2013

Basically all I want to do is login to my routers config page so that I can forward ports. I was able to this a few weeks ago but recently I have received this error. Failed to connect

Things that I have already tried:

- Tries using,, and all kind of variations.

- Tried with different browsers.

- Tried with seperate computer with different OS's (Mac and PC)

- Unable to flush dns because I get this error: CMD prompt error message .

- Have factory reset router a few times now.

- Unplugged, left off for 20mins-2hours.

View 16 Replies View Related

Unable To Login To Belkin F7d2301 Router

Mar 23, 2011

i cant login to my belkin f7d2301 v1 router tried fac reset

View 1 Replies View Related

Unable To Login Into Router To Setup Wifi

Apr 2, 2012

I just moved and have a new laptop, Comcast came in to reset the cable and internet. A new router was given to us and I cannot seem to access the password. I reset the router and now where to go nest since I try using the IP address and it is not recognizing it. I am using an unsecured WIFI access and I am not comfortable doing so.

View 1 Replies View Related

D-Link DAP-1522 :: Unable To Login With Default IP?

Jan 5, 2012

 changed the router wan access pwd and now trying to test the dap i can't seem to log in with the default ip / dlinkap url access i have tried the bridge and ap switch setting on the dap with no luck after resetting the dap a couple of times with no luck ..

View 8 Replies View Related

Cisco WAN :: SGE2010P Won't Switch Respond To Login After Reboot

Apr 8, 2012

SGE2010P won't Switch respond to login after reboot

View 1 Replies View Related

Cisco AAA/Identity/Nac :: 2960 - Unable To Login To Enable Mode

Dec 30, 2012

I configured the below config in Routers it is working good , but when i do the same in SWITCH-2960 , i am getting a problem not able to login to enable mode ... i am getting the basic login only ....
Error msg :   % Error in Authentication.
Need to be configured at TAFE Network Devices: Code...

View 4 Replies View Related

AAA/Identity/Nac :: Authentication Login On Switch 3750 E

Mar 29, 2011

I would like to make a centralized management of loggin account on my cisco switch (with a radius server). But, on Cisco 3750 E, i use 12.2(44) SE1 IOS and no command aaa authentication login exist.
Cisco 3750 can support other IOS than 12.2 who have this ability ?

View 2 Replies View Related

Routers / Switches :: Unable To Login To Asus Router?

Jul 31, 2011

I try to login to my router I try and put in the user name and password that I think it is. Is it the user name and password you set up or one that's already there and if so where can I find it??

View 6 Replies View Related

Linksys Wireless Router :: Unable To Login To WRT54G?

Jan 21, 2013

I am unable to login to my router ? I have tried to reset my router and am still unable to login to the online control panel. The steps that I went about resetting the router were pushing the reset button for 30 seconds. That did not work so I pushed the reset button for 30 seconds, unplugged the router while continuing to hold the reset button for 30 seconds, plugged the router back in while holding the reset for 30 seconds.

View 6 Replies View Related

TP-Link 150Mbps Wireless :: TL-WR700N - Unable To Login At

Dec 29, 2012

Region : Canada
Model : TL-WR700N
Hardware Version : V1
Firmware Version :
ISP : ShawCable

I have just bought the device. I works fine as a AP out of the box. I want to use it as a repeater of my wireless network which uses a Linksys Simultaneous Dual Band N Router WRT400N

1. To do the setup, I have tried to login at I cannot do this (a) using a wireless connection to a Linksys router which is connected to the cable modem and (b) wired connection to the router which is connected to the cable modem. The attempts get a timeout messaage.

2. The default gateway is The DHCP server has the same address. My computer is using

3. I use McAfee Internet Security software.

View 1 Replies View Related

Cisco Switching/Routing :: Steps To Login To GUI Of Switch 3560-X?

Sep 25, 2012

I have a 3560-X switch and want to access it through GUI. what image I need to download and steps to use GUI(Just like ASDM for ASA 5500 series Firewall).

View 1 Replies View Related

Cisco Security :: 3355 Unable To Login Through GUI (Virtual IP Address) For NAC HA Pair

Feb 22, 2011

I have configured 3355 NAC appliances in HA pair everything is running fine.But not able to Login through GUI (Virtual IP) which is used during the configuration of HA pair.

View 1 Replies View Related

Cisco Switching/Routing :: 3750 - Unable To Login With Local Account

Jun 11, 2013

We created some local account for this switch but we unable to login when the TACACS Server down.

3750 Switch
aaa group server tacacs+ ACS
server x.x.x.x
server x.x.x.x
ip vrf forwarding Mgmt
ip tacacs source-interface GigabitEthernet0


View 2 Replies View Related

Copyrights 2005-15, All rights reserved