we're using a network and only one computer can't seem to connect to the printer. it runs on a windows 7. tried reinstalling it but it seems nothing has changed same error messages is coming up each time i tried to setup the printer.
I cannot connect to the Internet. I have a d-link router/modem combination DSL-2640B that was working on my old XP pc that died. My new laptop is a 64-bit Windows 7 machine that cannot see my router. I can connect to the Internet using my iPad. When I enter http://192.168.1.1, I get an error on EI 9 that says Internet Explorer cannot display the web page. Ipconfig returns an auto configuration address of 169.254.46.231 I cannot ping the router. I can't figure out how to get into my router to reset it. I have unplugged everything, flushed DNS, and restarted with no difference. I can't cut and paste because I cannot get to the Internet from my Laptop.
What i am trying to do is that i have a server in my store which has a running software for the store. I have a TP Link Wifi card installed in my pc.. i need to access the server using an ip through the ethernet cable. And i access the internet via the wifi device installed and running in my pc. the problem now here is that i cannot access both of the simultaneously. If i connect back the ethernet cable the browser does not browse or the internet does not work.. and i can access my server software.. as i unplug the ethernet cable my wifi card installed starts working all good and i can use the internet.. i have tried a little of soultions but have not been successfull enough to use both the connections simultaneously..
I've got a PC(windows 7) connected to a wired router(not wifi), and I also have a laptop that shares the internet with the PC using wifi. A wired printer is connected to the PC. Is it possible for me to share files and print using laptop? (Wifi Connected to a Wired Internet connection)
I cannot get my new Nook Tablet to connect to my home wifi. it recognizes the network and authenticates the password but won't connect. Everything else in the house connects fine.Someone installed the router for me a couple years ago as a favour. It is a Linksys router.
1- Router that is working as Router (IP: 192.168.0.1 ) ( Ethernet ) routing from : IP Address:192.168.67.83 Subnet Mask:255.255.192.0 DNS Server:192.168.100.1 , 220.127.116.11and its providing internet via Wireless.
2- router for the office ( connected network HDD, Printer ) is using the IP : 192.168.5.254-
What I want to do :
1- turn the wirless off on the router ( 192.168.0.1 ).
2- make all of the employees in the office use the wifi on the router ( 192.168.5.254 ).
3- make the router 192.168.5.254 serve Internet.the problem : we cann't connect the first router ( 192.168.0.1 ) to the second router ( 192.168.5.254 ) via Ethernet. The question : can we connect them via wireless ?
The Main Router : 192.168.5.254 Linksys X3000 The Internet Router : 192.168.0.1 150M Wireless Lite N Router Model No. TL-WR740N / TL-WR740ND
I have large bunglow with 2floors,I would like to have a wireless internet setup in bunglow using 3g usb modem type of internet connection.Advise which router to be used so that I can get good wifi connectivity all over the place so minimum 4 people can use it simaltaneously.
is this network able to handle wifi 200 clients?Load balancing QNO FQR7110[URL]Access point: TP-LINK 300Mbps Wireless N Range Extender (TL-WA830RE)[URL].My client is all students... and all of them will connect to the internet by using Wireless connection.So i estimate 12APs for them.. each access point will have around 17 clients...and the 6 APs will be connect to 1 HP 1910 Switch Series 8 ports switch...*Note: the switch is Smart managed switch, but im not going to setup it.. i will just plug and play..May i know it is suitable to use that model of device to setup the network with 200 clients?The load balancer and switch it is enough Processor and RAM?
every time i go to my log in it ask for a pass word i did not make a pass word i have put in all kinds of pass words and got no where it will not even give me a hint i have went to safe mode it still ask for pass word . i have windows 7 how to rid the problem so that i can get around the administrator and remove it so that i can make another administrator account.
I've set up a DHCP reservation on a Netgear wpn824v3 router, using its "Attached Devices" list to specify the MAC address of a computer on the network to use IP 192.168.5.200. After using "ipconfig /release" then "ipconfig /renew" on the client PC, though, the client PC keeps going back to the address it got automatically, i.e., 192.168.5.3.How can I force the client to use 192.168.5.200?
Dell dimension 2400 XP home. Connects fine to old linksys g router.With new qwest dsl modem/router get IRQL not less than or equal as soon as I click on connect .Blue screen stop and must reboot.Qwest router works fine with my lenovo lap top. Win 7.
* WiFi router (Netgear WPN824v2) connected to ADSL modem
* CPU, iPhone and iPad connected to router, CPU wired connection.Everything has worked like a charm up until a couple of days ago. Now the link between the router WAN port and the modem randomly drops. Stays dropped for 1-3 secs and then connect again. When its really bad this happens with 5-10 secs intervall. This made it impossible to use the network from any of the devices.If I disconnect the CPU from the router and connect it direcly to the modem and change the IP settings to match the modem network the CPU connects without errors to the internet, iPad and iPhone connected to the router keeps having problems.Restarting the router does not change anything and it seems to be more frequent errors during heavy load hours, in the morning I have almost no problems at all, in the evenings I cant almost use the wireless devices (CPU works fine as its now connected directly to the modem not through the router).I havent changed a setting in the last year, it just came right out of the blue.I have hard reset both the modem and the router and reconfigured them (that I dont want to do again as I have some virtual servers, port forwards, port triggers and so on :P).As it came right out of the blue without me changing anything on any device and as it seems to be more frequent during heavy load hours I'm suspecting that the ISP is involved, but how can they be (it works fine with devices connected straight to the modem)?
Router is Airport. Interference to all am radios (in both cars, transister radio, and plugged in clock radios) within 10 m radius of our house. Have had router for two years, but problem started suddenly last Sunday morning. Figured it was the router by turning it off (no interference) then on again (interference returned).