I'm trying to set up 2 separate networks in my home, both of which have access to the internet through a single ISP.I have set up my networks using 2 routers as described in the "Version 2" scenario found here: url...The problem is, a computer connected to the LAN side of Router 2 is able to ping and map shared folders on computers connected to the LAN side of Router 1. According to the writeup (last paragraph), this should not be the case.I have been over the setup multiple times to ensure it is per the writeup but each time, I am able to ping and map.Is there some additional router/computer settings that I may be missing?FWIW, here's my take on what is happening (with the ping): When a computer on the LAN side of Router 2 (submet 192.168.1.x) does a ping to a computer on the LAN side of Router 1 (subnet 192.168.0.x), Router 2 sends the request to its Default Gateway (since it's a different subnet).Router 1 however, recognizes this as its LAN side subnet and forwards the request to that computer. The ping response is then routed back from Router 1 to Router 2.
My new employer has asked me to determine any issues that could be causing performance issues our LAN. The network has two subnets and one of the first things that I noticed is that I cannot ping computers on subnet A from subnet B. I've looked into this and found a few things.-I CANNOT traceroute to computers on subnet B from subnet A-I CAN NMAP to computers on subnet B from subnet A-Computers on subnet A CAN ping other computers on subnet A and computers on subnet B CAN ping other computers on subnet B-Computers on subnet A CAN ping and access servers on subnet BI am relatively new to networking and not exactly sure where to start investigating this problem.
I want to setup an home network with a wireless router and use multiple switches for wired connections through out my home. I currently have an Airport extreme hooked up to a cable modem and a leviton gateway hooked up to the Airport. The 2 computers connected to the Leviton are on a windows 7 homegroup and share fine, but won't share or discover any wireless device connected to Airport. My main goal is to have a wireless/wired network with all computers sharing information with each other. I want 2-3 wired switches/gateways with a min of 2 devices connected to each, connected to my wireless router whiich is connected to cable modem.
I have 4 computers on LAN using a router and I cannot see eachother, don't know how to configure the PCs. The router is set on DHCP for LAN, the PCs are using Windows 7 and can connect through the internet the router is providing (4 dells) but don't know how to set the computers to see eachother and to share files.
I try connecting to my Linksys wireless N router's setup but it doesnt even find the "site". I have tried pinging the router and i get no response, i have restarted the router and everything, It has never done this before.
I have 3 laptops, 2 tivos, wii, ipad, i touch, etc..... how many items can connect to one router without drops outs? My internet keeps dropping off since my last device connected to my wireless home network and we have to keep hitting the reset button. Do different routers support more devices than others?
I have an Iball Baton Router. I am not able to connect to it from my PC. However, I am able to connect to the router from my Laptop.I have tried isconnecting and renewing the ip. Can see that ip (192.168.1.102) is issued to my PC and can ping to the same. But, do not get any reply when I ping to the gateway (192.168.1.1 - ip for the router). My OS is Windows 7 64 bit.Let me know if you need any more information
I have a WD, 1TB, external harddrive with a USB connection and would like to know if it is possible to get a USB hub with an ethernet connector to connect into the back of my router. Is it possible to do this? If so, what will I need to do? Will I need to give the external drive a static IP address, then partition it?
I changed my netgear wireless router password and now my laptop will not connect to the router or to the internet. It has no popup to put the new password. I have no problem logging on with my phone...just the laptop.
I have a router connected to my computer for the many laptops and netbooks used in my home. My computer is down for a bit.I have an internet card, but no one else can use their laptops/ netbooks.Can I also connect my router to my laptop for multiple use in the household?
My Netgear WNDR3300 wireless router has stopped working. I was trying to put new firmware on it and it just stopped being able to connect to the internet. I can't connect to the internet through it wired or wirelessly. Wirelessly I can connect to it, but I can't do anything like browse the web. I have tried resetting it to factory defaults and restarting it and my modem many times, and my modem can't be the problem because using my other router everything is fine.
I'm having trouble connecting my 02 dongle to the internet using my router. My router is a TP-LINK MR3420 and my 02 modem device is E1752. I checked to see if the modem is compatible and it says it is. I went through the configuration that was given to me with the router and I tried using you tube but nothing. Do i need to get a static I.P address off my Internet provider? If I plug my 02 USB dongle directly into my computer it works perfectly and I got the router to work using a Ethernet cable and plugging it into the WAN port at the back of the router but I would prefer to let it connect through the 3g port
I have one ADSL router that I have configured Port Forwarding on it, but the internet is very slow. I also have another 3G router and I want to use it for internet because it is much faster, but it cannot do Port Forwarding. How can I connect this two routers in one network such that ADSL router is for Port Forwarding only and 3G router is for internet only?
I want all the computers on my LAN to access via a proxy server in another country. I have a Netgear DG 834N router and would like that to connect to the proxy server rather than having to define it on each browser.
Motorola wr850gp wireless router. The default ip is 192.168.10.1. I attempted to use it as a wireless access point and now it is not working at all. I tried connecting the router LAN port to the computer and 192.168.10.1 pulls up nothing.I tried connecting the modem to the WAN port and the LAN port of the router to the PC, but then I have no internet access at all. I tried resetting the router, still nothingAll lights on the router are green. I don't know what the heck is going on?
my computer will connect wired to internet and can find the wireless connection but wont connect. my wireless icon flashes intermitently and my mobile will work via wifi. do i need a new router this one is a G wireless Modem router Belkin had it for about 4 years?
I have high-speed cable access currently coming into an older D-Link 4-port wired router. I need to buy a new wired and wireless router so I can sync my new Android 4G phone (I'm in an area with bad cell coverage but I can sync with wi-fi). I have a second house about 200 feet from mine and have 3 Cat5E lines running underground in conduit to it so the lady next door and and her two kids can use the internet (I have 40-50mb service for my business use at home). Problem is that my kids have discovered YouTube, streaming video, video chat, etc. and are burning up my bandwidth. I currently have two of the lines to them disconnected so that I can limit their use to one computer at a time. I'm considering having them buy a Wireless Access Point, can they connect it to the standard single Cat5E LAN wire that is coming from my new wired and wireless router when I buy it?
I installed DD-WRT on my router and placed it in bridge mode, configuring it with what I thought was my Androids IP address for the gateway. I tried with the Android IP address identified through cmyip.org, 22.214.171.124, and with the one identified through ipconfig command, 192.168.43.1. Neither address was successful. Also, I am unable to access my router using the IP address that I manually assigned to it.provide some assistance on the process of bridging from an Android to a wired PC through a router, Linksys WRT54G v3,
I have a Netgear N300 Wireless Router (WNR2000), and I am trying to connect the internet through it. The internet light stays amber, and though the router recognizes it, I can not connect to the internet. My computer also doesn't seem to recognize the router at all. Installation CD will not work either.
I have two separate companys both with staff at two locations and thier own networks connected with a wireless antenna which provides a high speed LAN connection between offices. I only have a single path through this antenna bridge. I have an SG200-08 switch at each end. What I am attempting to do is utlise the switches to take the two subnets at one office, combine them to one for transfer through the antenna bridge, and then resolve them into the two separate networks again at the other end.
Is it possible to daisy chain 3 switches and not have ip conflict? I am running a public access network for a library. For certain library software I need for all workstations to see each other. I have 25 workstations in total and two separate management consoles. I have all workstations on two switches but one of the management consoles is on the third switch because when joined with the others it has an ip conflict. I need this console for the digital sender that is connected as well as to act as a server for go print software.
I have a "normal" router powering my home wireless network and everything is just fine. However, there are some devices that I want to run exclusively over a VPN, but they do not support VPN applications. I understand that there are some VPN routers available that have the VPN support built-in at the firmware level (Buffalo AirStation WZR-HP-AG300H). This is exactly what I need, but I don't want to run my entire home network through the VPN, only certain devices. So, can I do something as simple as connect my VPN router directly to the "normal" router and effectively run two different wireless networks in the house?Would daisy chaining the routers in this way interfere with the VPN tunneling ability?
I have a stack of 6 switches and I want to add another over the gbit connector using fiber. I already connected but I can acces the network from the new switch. I don't have any issues on my Stack all resources are available Do I need to do some special setup or connection to enable this? Can be stacked like the others? I already usen the 2 stacking port can i Add another switch?