Routers / Switches :: How To Connect ADSL And 3G Router On Network
Aug 7, 2012
I have one ADSL router that I have configured Port Forwarding on it, but the internet is very slow. I also have another 3G router and I want to use it for internet because it is much faster, but it cannot do Port Forwarding. How can I connect this two routers in one network such that ADSL router is for Port Forwarding only and 3G router is for internet only?
Have one switch and network.PC number one have win98 and network adapter and connected to the switch.PC number two have winXP and network adapter and connected to the switch same as win98.Network works on win98 and winxp they see each other.internet working on winxp but dont work on win98
A Telindus 1421 SHDSL Router and a Sagem F@st 1500WG wireless adsl router.The question is: Can i connect this two devices directly over the adsl port and share networks on each side of each of the devices?
I have CentOS and the application I am running does not listen on 192.168.1.5 (Private IP address). Right now I have connected using bridge mode and I can see in my network configuration-> ppp and eth0. PPP has public IP and eth0 has private IP. Is there any way that I can get public ip assigned to eth0? I do not have Static IP, I want to use the public dynamic IP assigned by my ISP to use in eth0 interface.
I want to connect a Netgear FS605 directly to my ADSL router.However I find that this does not work unless I put my Netgear EN2005 Hub in between the Switch and the Router.The Hub is 10Mb/sec the switch 100Mb/s so I would like to eliminate the hub.
I want to setup an home network with a wireless router and use multiple switches for wired connections through out my home. I currently have an Airport extreme hooked up to a cable modem and a leviton gateway hooked up to the Airport. The 2 computers connected to the Leviton are on a windows 7 homegroup and share fine, but won't share or discover any wireless device connected to Airport. My main goal is to have a wireless/wired network with all computers sharing information with each other. I want 2-3 wired switches/gateways with a min of 2 devices connected to each, connected to my wireless router whiich is connected to cable modem.
I am wondering what the cable wires or sockets on the back of this router are for? could it be you can connect through the cable tv network the sockets fit perfectly in the back of the router thats a strange coinsidence dont you think?
What i am trying to do is that i have a server in my store which has a running software for the store. I have a TP Link Wifi card installed in my pc.. i need to access the server using an ip through the ethernet cable. And i access the internet via the wifi device installed and running in my pc. the problem now here is that i cannot access both of the simultaneously. If i connect back the ethernet cable the browser does not browse or the internet does not work.. and i can access my server software.. as i unplug the ethernet cable my wifi card installed starts working all good and i can use the internet.. i have tried a little of soultions but have not been successfull enough to use both the connections simultaneously..
I just bought a sony vaio laptop and I can't connect to the wireless network, it appears back and forward a message saying that the adapter is not found and then it says it is working and then it is not found again and so no.. Tried to connect the laptop using the WPS button but it did not work either.
Our church has 1 phone line, we run BTBusiness Broadband at one of the building where we have a couple of charities based. We have the phone line connected to an extension at the other end (where the Church is) >80m away. Any way of running a second concurrent router on the extension so I can set up an office with a VOIP number, pC's printers etc there too? We use Devolo ethernet over mains and wireless for the main building, but the church itself is on a completely seperate mains power supply so I can't use that. I could run 100m Cat 5 and locate a switch on that, but any way of achieving something similar over the phone cable which is already in place.
Trying to connect two systems together but was giving error that contact network administrator,one system is laptop with wireless and other is desktop but connect through cable but running windows XPSamson
I was using Linksys ADSL router ( WAG120) as modem router. Recently I bought new Linksys x3000 and installed a modem router in place of WAG120. Now i would like to connect the both routers to get the signals in first floor of my house.
We've (an independent school) just bought an SR520 with a view to replacing one of our Draytek 2820s. We need to set up some site-to-site VPN with NAT and the Drayteks won't do it.
I've been trying to configure the SR520 in just the most basic fashion using CCA (3.1) and the CLI but with no success. I can't get a PPP connection with our ISP.
I've tried following the instructions in the software config pdf and also tried replicating the various 'running configs' reported in other posts in this forum to allow connection to a UK ISP, with no success. I don't know how many times I've reset the poor thing to factory defaults.
I have to say that I'm dismayed at how flaky the CCA appears to be. Many of the things I've tried with it simply don't work and often end up in it hanging. Close to useless in my view.
So instead I've tried to use the CLI which seems a lot more solid but is somewhat impenetrable and there's precious little by way of supporting explanation.
I have 4 computers on LAN using a router and I cannot see eachother, don't know how to configure the PCs. The router is set on DHCP for LAN, the PCs are using Windows 7 and can connect through the internet the router is providing (4 dells) but don't know how to set the computers to see eachother and to share files.
I try connecting to my Linksys wireless N router's setup but it doesnt even find the "site". I have tried pinging the router and i get no response, i have restarted the router and everything, It has never done this before.
I have 3 laptops, 2 tivos, wii, ipad, i touch, etc..... how many items can connect to one router without drops outs? My internet keeps dropping off since my last device connected to my wireless home network and we have to keep hitting the reset button. Do different routers support more devices than others?
I have an Iball Baton Router. I am not able to connect to it from my PC. However, I am able to connect to the router from my Laptop.I have tried isconnecting and renewing the ip. Can see that ip (192.168.1.102) is issued to my PC and can ping to the same. But, do not get any reply when I ping to the gateway (192.168.1.1 - ip for the router). My OS is Windows 7 64 bit.Let me know if you need any more information
I have a WD, 1TB, external harddrive with a USB connection and would like to know if it is possible to get a USB hub with an ethernet connector to connect into the back of my router. Is it possible to do this? If so, what will I need to do? Will I need to give the external drive a static IP address, then partition it?
I changed my netgear wireless router password and now my laptop will not connect to the router or to the internet. It has no popup to put the new password. I have no problem logging on with my phone...just the laptop.
I have a router connected to my computer for the many laptops and netbooks used in my home. My computer is down for a bit.I have an internet card, but no one else can use their laptops/ netbooks.Can I also connect my router to my laptop for multiple use in the household?
My Netgear WNDR3300 wireless router has stopped working. I was trying to put new firmware on it and it just stopped being able to connect to the internet. I can't connect to the internet through it wired or wirelessly. Wirelessly I can connect to it, but I can't do anything like browse the web. I have tried resetting it to factory defaults and restarting it and my modem many times, and my modem can't be the problem because using my other router everything is fine.
I'm having trouble connecting my 02 dongle to the internet using my router. My router is a TP-LINK MR3420 and my 02 modem device is E1752. I checked to see if the modem is compatible and it says it is. I went through the configuration that was given to me with the router and I tried using you tube but nothing. Do i need to get a static I.P address off my Internet provider? If I plug my 02 USB dongle directly into my computer it works perfectly and I got the router to work using a Ethernet cable and plugging it into the WAN port at the back of the router but I would prefer to let it connect through the 3g port
I want all the computers on my LAN to access via a proxy server in another country. I have a Netgear DG 834N router and would like that to connect to the proxy server rather than having to define it on each browser.
how to connect a adsl modem to a computer network using a switch with a server.I have a network with a server and about ten clients computers all connected through a switch, the server has an IP 192.168.1.1 as its gateway. I want to connect adsl modem to the switch so that all the computers can have access to the net, but the adsl too has 192.168.1.1 as its IP.
Motorola wr850gp wireless router. The default ip is 192.168.10.1. I attempted to use it as a wireless access point and now it is not working at all. I tried connecting the router LAN port to the computer and 192.168.10.1 pulls up nothing.I tried connecting the modem to the WAN port and the LAN port of the router to the PC, but then I have no internet access at all. I tried resetting the router, still nothingAll lights on the router are green. I don't know what the heck is going on?