It seemed that show vpn-sessiondb ra-ikev1-ipsec will not provide the client type of the remote vpn user as show vpn-sessiondb remote did before.
Is there a way to find it out on ASA running 8.3?
We are using an ASA 5510 and remote access (SSL VPN) using the AnyConnect client.
Is it possible to display a user message when a user connects using the AnyConnect client, matching a specific dynamic access policy? Can the message be displayed when the action is "Continue" rather than "Terminate"? I can't seem to get this to work and wondered if there was a LUA function to do this.
We have a DAP which gives a restricted ACL when the user's anti-virus is out of date, and I wanted to notify the user to update their anti-virus and reconnect.
I need to configure our ASA5505 firewall for remote access to our network using EasyVPN software installed on a laptop. That laptop will be connected in the different places, using DSL or 3G toggle or Public Wi-Fi. For some people it's very easy, but I don't have any experience with firewalls.
View 9 Replies View Relatedhow many remote user connect using Cisco VPN client on Cisco Firewall ASA5520-BUN-K9? Already i read VPN Client FAQ But their have no information about user limitation.
View 1 Replies View RelatedI have a 3845 router (12.4(13r)T10) with ZBF. On my LAN there is a user who need to access a remote IPSEC VPN server. He is able to get the tunnel but afterwards he cannot connect to any service in the remote LAN. As I'm using zbf I think that I should inspect traffic from my LAN zone to EXT zone, There is a document that describe a solution to this? What IP adressess should I use?
View 2 Replies View RelatedI have a 3845 router (12.4(13r)T10) with ZBF. On my LAN there is a user who need to access a remote IPSEC VPN server. He is able to get the tunnel but afterwards he cannot connect to any service in the remote LAN. As I'm using zbf I think that I should inspect traffic from my LAN zone to EXT zone
View 3 Replies View RelatedI would like to create a additional user vpn on a 55010 where the user authenticates with the firewall and not the radius server.This user should NOT be able to log on to the firewall, but only be able to authenticates with the vpn client.I'm correct that the command "username abc123 password abc234 privilege 0" ?Also for this remote vpn how to I make sure the user only authencates with this password?
View 3 Replies View RelatedASA 5510 ASA 8.0 ASDM 6.1 I want some remote users to have split-tunnel connection, others not. I used Cisco Document ID 100936 "Allow Split Tunneling for AnyConnect VPN Client on the ASA Configuration...". I created a new Group Policy with split-tunnel enabled. I created a new Connection Profile and assigned to it the new Group Policy. When I authenticate at the AnyConnect client I get a dropdown of the 2 connecton profiles, to choose the one I want. Each of them works, enabling or disabling split-tunnel. But I want to assign a connection profile to the particular user, not give the user a choice. The problem is I'm using LDAP authentication. The Local Users I set up before LDAP are obsolete, assigning them a Group Policy does nothing. I really don't want to give up LDAP and force people back to another local password. But the LDAP authentication to Active Directory just says yes or no, it won't assign a connection profile. At the AnyConnect Connection Profiles page I have set a switch "Allow user to select connection profile, identified by its alias, on the login page. Otherwise, DefaultWebVPNGroup will be the connection profile". If I clear that switch every user will be assigned the same default profile, which does not work.
View 2 Replies View RelatedI am trying to implement IPSec Authenticated Firewall Bypass on windows vista clients within my microsoft domain to avoid implementing numerous windows firewall port exceptions for each client.
This is working internally on our network, between services servers (i.e AV server), and desktop clients. However i am having a problem when the clients are remotly accessing the domain via the VPN client.I have open traffic ports (IKE-UDP500, ESP - IP Prot 50, AH - IP Prot 51) bidirectionally between the remote vpn clients subnet and the services servers, however when the endpoints initiate traffic to the services server, the IKE traffic is unencrypted?
I ve configures an asa 5505 for remote vpn with anyconnect. it works just fíne - from remote i can ping the Clients and Server inside, i can do RDP or Connect via SSH to any machine, map some volumes local and so on but: I can not connect microsoft sql server. It uses port 1433 for the first connect and establishes then a dynamic connection. So i am a Newbie - what rules or configs do i miss?
View 3 Replies View RelatedWe have ASA5500's deployed for remote access concentration.We use Cisco IPsec vpn client with a group policy the chacks for Network ICE BlackIce ersonal firewall.The powers-that-be wish to change to McAfee presonal Firewall ok..Now the Group Policy allows you to check for several pre- configured Firewalls, Cisco Integrated, Sygate, Zone Labs etc.So as McAfee are no listed then I am to assume we go for "Custom Firewall" and this is where I am struggling.To configure checking for a Custom Firewall I must have the Vendor ID and the Product ID.McAfee haven't the faintest idea what we're talking about when we ask them for these details.Or is there a way to extract them from the registry of a machine with the McAfee product installed?
View 3 Replies View RelatedWe are using the CISCO-DOT11-ASSOCIATION-MIB in a Cisco Air AP 1140 device with release 12/4(21a)JA1 to find out the radio type of wireless client (B/G or N). The clients in question are of type Wireless N and Wireless B/G. We are querying cDot11ClientDevType and cDot11ClientRadioType but the relation between the returned values and client/radio type is not clear:
2 devices returned: cDot11ClientDevType = 102 ==> pc4500Client(102) - client with a 4500 radio and ClientRadioType=2==> ccxClient(2) - CCX- compatible radio1 device returned: cDot11ClientDevType = 1==> unknown (1) – unknown and ClientRadioType= 1==> unknown(1)
Questions: On a Cisco Air AP 1140 device
What OID needs to be polled to find if the client's radio type?What value is returned by this OID if the radio type is B/G?What value is returned by this OID if the radio type is N?
I'm trying to configure a VPN remote access type on a SA520-k9 but i don't know why doesn't work.
My Internal network is 192.168.131.0/24 and my Wan Ip is 87.216.xxx.xxx.
on Remote WAN's IP Address / FQDN i put the WAN IP 87.216.xxx.xxx on Local WAN's IP Address / FQDN I put the cisco SA520 Ip. I think this is the problem.
I create a IPsec user. I create a firewall rule from WAN interface to SA520 Ip with IPSEC-UDP-ENCAP service.
The Release Notes for 7.0.116.0 of WLC 5500 has a table which title is "Client Type", and it shows wireless adapters. My question is,
what kind of customer means? Wireless clients or clients for an specific application? If it was the first option, does it mean tha just this adapters could connect to my wireless network?
I have setup the WLC to authenticate to a MS Server2008 NPS for a WPA2/AES SSID. The connection is successful, but client authentication fails for wrong EAP-type. I believe this indicates a Windows7 client issue. What is the required client setup to satisfy the MS NPS?
View 8 Replies View RelatedLogon failure: The user has not been granted the requested logon type at this computer" Im having this same problem on two computers. One running windows vista ultimate 64bit and windows 7 home premium 32 bit to windows server 2008 r2 64 bit?
View 3 Replies View RelatedI want to create a local user in my Cisco ASA 5520 to allow the user to use the ASDM in Read-Only mode. I want the user to view the Dashboard only.
View 1 Replies View RelatedWe are running Cisco Wireless Control Sytem (v7.0.164.0) with 4 - WLCs (v5.2.193.0) and about a 100 Aironets and I was wondering how to get WCS to identify the Client usernames? When trying to view monitored clients usernames, all it shows is Client Username <unknown>, though their MAC and IPs are correct. I'm not sure if this has to do with mobility anchors or not, but currently we have none setup in case. How to resolve the machine name or actual username that is logged in... either one.
View 2 Replies View RelatedI have a client that wants to segment their wireless network behind their ASA. We currently have a normal setup, 5510, 2 interfaces, outside, inside. On the inside network there are Cisco Wireless APs that allow for internal access to the network. We want to move the APs to a new interface on the ASA and only allow traffic bettwen this new "Wireless" network and the internal network by using remote user VPN. So my question is, can you use remote user VPN from the new Wireless network to the inside network??
View 1 Replies View RelatedI have some LSA type 5, I want to change it from type 5 to type 3 before send to another Area, How can i do it?
View 1 Replies View RelatedHow do I setup remote login that would allow 3 or 4 people to login to the same computer.Each person would have their own Windows User Account name, with different privileges.I don't know what software could do this. The computer being connected to would be Windows 7, and there is no special network equipment besides a consumer router.
View 11 Replies View RelatedEach person would have their own Windows User Account name, with differentprivileges.I don't know what software could do this.The computer being connected to would be Windows 7, and there is no special network equipment besides a consumer router.This is a very small business and keeping costs under control is important
View 9 Replies View Relatedip local pool VPNPOOL 192.168.200.1-192.168.200.100.
i can access servers with remote vpn which they located at dmz zone at asa(write nonat access-lsit) but i can not 192.168.193.0 subnet at asa.i configurated proxy server. my proxy server inside interface get ip address my dmz zone(172.16.10.254) and outside is ip adddress asa outside interface (10.0.0.254).the users (192.168.193.0/24) go internet from proxy server.
[code]....
Someone hacked into my computer through my Netgear router. They took over as Administrator and setup a Atheros (sp) driver. They pretty much have total control over my computer. How can I rid myself of this hack and protect nyself in the future?
View 5 Replies View RelatedI want to share the My Documents folder from an XP machine with ONLY one user (the administrator) on a networked Win 7 machine. I have turned off simple sharing on the XP machine. I hate XP!! So complicated to do anything. Anyway, under security, I have tried share this folder, and not to share folder. I have gone into Advanced and messed around with permissions, taking out Everyone, using Admin only, using Network. At one point I ended up not being able to access My Documents on the local computer and had to jump through many hoops to change ownership and disable read only so that the user could use her own files!The problem is, under Advanced in the permissions area, I cannot see the users on the remote pc to choose which one should be allowed access. how to actually find a particular user on the Win 7 pc and give ONLY that user permission to read (not to change) the files in My Documents on the XP pc.
View 3 Replies View RelatedHow do I setup remote login that would allow 3 or 4 people to login to the same computer. Each person would have their own Windows User Account name, with different privileges.I don't know what software could do this. The computer being connected to would be Windows 7, and there is no special network equipment besides a consumer router.his is a very small business and keeping costs under control is important.
View 6 Replies View RelatedI'm on WLC 5508 . It doesn't matter if passive client feature is turned on or turned off , when you try to increase "User Idle Timeout" you can see this message:
In our network, a lot of clients gets deauthenticated. I thought it would be useful to enable "Passive-client" feature, or increase "user idle timeout" , but how these works with each other?
it's probably just me but I have tried real hard to get a simple AnyConnect setup working in a lab environment on my ASA 5505 at home, without luck. When I connect with the AnyConnect client I get the error message "User not authorized for AnyConnect Client access, contact your administrator". I have searched for this error and tried some of the few solutions out there, but to no avail. I also updated the ASA from 8.4.4(1) to 9.1(1) and ASDM from 6.4(9) to 7.1(1) but still the same problem.
The setup of the ASA is straight forward, directly connected to the Internet with a 10.0.1.0 / 24 subnet on the inside and an address pool of 10.0.2.0 / 24 to assign to the VPN clients. Please note that due to ISP restrictions, I'm using port 44455 instead of 443. I had AnyConnect working with the SSL portal, but IKEv2 IPsec is giving me a headache. I have stripped down certificate authentication which I had running before just to eliminate this as a potential cause of the issue. When running debugging, I do not get any error messages - the handshake completes successfully and the local authentication works fine as well.
ASA Version 9.1(1)
!
hostname ASA
domain-name ingo.local
enable password ... encrypted
xlate per-session deny tcp any4 any4
xlate per-session deny tcp any4 any6
[Code] .....
We want to use ASA5520 but both Firewall have different CPU. One has CPU Pentium 4 2400 MHz and another has Pentium 4 Celeron 2000 MHz. Can it be configured for replica / failover?
View 5 Replies View RelatedAt first I use ACS 4.2 to create static ip address user for remote access VPN,It's easy,just configuration it at user set>Client IP Address Assignment>Assign static IP address,but when I use ACS 5.2 I can't find it.I try to add IPv4 address attribute to user by read "ACS 5.2 user guide" ,it says this: [code] I do this,but it's not work.When I use EasyVPN client to connect ASA 5520,user could through authentication but will not get that static IP address which I configuration on Internal Users.so,what should I do,if anyboby knows how to use ACS 5.2 to create a static ip address user for remote access VPN.
View 2 Replies View RelatedOur customer has an ASA5520 Security appliance, I have already config the remote vpn in asa , user can logon via internet by vpn client and can access internal network,customer hope us can make some configuration if the remote user logon asa by vpn and notify them someone login their vpn by email .
View 2 Replies View RelatedI am currently trying to decide on the best remote support software to purchase for a 50+ workstation business. I have experimented with Real VNC and TeamViewer, and whilst they are quite comparable I noticed that TeamViewer has a feature called "Seamless Windows" I will be providing remote support to local users, and several interstate branches - therefore the software that I decide on must accommodate a wide diversity of geographical locations.I was also looking at a product called GoverLAN, but it seems to me that GoverLAN only works on a single LAN and can't be used over a WAN in a similar way to both RealVNC & TeamViewer?
View 4 Replies View RelatedI've just installed NCS. When trying to configure NCS for ACS Tacacs+ authentication, I receive the message below when trying to login to NCS. ACS records my login in the 'passed authentications' log. I am using ACS 4.2."No authorization information found for Remote Authenticated User. Please check the correctness of the associated task(s) and Virtual Domain(s) in the remote server". I used the following link to configure ACS for NCS, url...
View 3 Replies View Related