Cisco VPN :: How To Configure Remote Access Type On SA520-k9
Mar 21, 2012
I'm trying to configure a VPN remote access type on a SA520-k9 but i don't know why doesn't work.
My Internal network is 192.168.131.0/24 and my Wan Ip is 87.216.xxx.xxx.
on Remote WAN's IP Address / FQDN i put the WAN IP 87.216.xxx.xxx on Local WAN's IP Address / FQDN I put the cisco SA520 Ip. I think this is the problem.
I create a IPsec user. I create a firewall rule from WAN interface to SA520 Ip with IPSEC-UDP-ENCAP service.
View 3 Replies
ADVERTISEMENT
Jan 22, 2013
I am trying to configure Remote Access VPN in our Cicco ASA 5520 firewall through SSL VPN wizard. I tried to configure Anyconnect VPN client option, but after entering user/pass it gives error "An error was received from the secure gateway in response to the VPN negotiation request. Please contact your network administrator. The following message was received from the remote VPN device: No assigned address"
As looking online there is no easy step-by-step option for same. I want to provide Remote Access VPN to some of our user abroad who should have access to few server applications and no internet access.
View 8 Replies
View Related
Sep 23, 2011
I am trying to configure remote access VPN to my network, i have a Cisco ASA 5510 IOS 7.0(7).
I configured the VPN using ASDM 5.0.9 and below is the configuration received:
access-list 90 extended permit ip 192.xxx.xxx.0 255.255.255.0 192.xxx.xxx.248 255.255.255.248
access-list ClientVPN_splitTunnelAcl standard permit 192.xxx.xxx.0 255.255.255.0
ip local pool VPNIpPool 192.xxx.xxx.250-192.xxx.xxx.252 mask 255.255.255.0[code].....
View 5 Replies
View Related
Jun 4, 2013
Our ASA 5510 was configured with a public interface, a DMZ interface, and a private interface. I have a remote access VPN using AnyConnect client and LDAP authentication for Active Directory. We are changing ISP (groan!), which means all new public IP addresses. The new circuit is installed, so I have a second public interface (same security level as the first public interface, wholly different IP address range) enabled on the ASA. I hope to transition whatever I can, which means get the VPN access through either public interface. Can I just enable client access on the second public interface at the Anyconnect Connection Profiles tab in ASDM? That seems too simple. Can they share the one address pool?
View 1 Replies
View Related
Apr 16, 2012
i have cisco ASA5520 and i have a remote access vpn .I want to configure logging for this remote access vpn.
i want the time user connected .how log it is connected .If any error while connecting ?
View 4 Replies
View Related
Sep 10, 2012
I have two Windows7 machines (PC and laptop). I've set PC as VPN server and laptop as VPN client using default built-in W7 network tools. I've disabled use default gateway in remote network on client machine, so client don't try to route all communication through VPN. I've routed port 1723 (TCP/UDP) on NAT to my server and enabled IPSec/PPTP/L2TP passthrough
I've put my laptop in indepedent network (basically I've connected it via 3G network), connected to VPN server and checked ipconfig /all
I've get:
IP Address: 192.168.1.101
Mask: 255.255.255.255
Gateway: (none)
LAN mask in server LAN network is 255.255.255.0 - I am surely missing something obvious, but Google doesn't give me any good advices; How can I access local LAN network from remote VPN client? How can I access local shared documents?
View 2 Replies
View Related
Aug 12, 2012
I am adding a second external connection to an existing system on an ASA 5510 with ASA V8.2 and ASDM 6.4. I added the new WAN using an other interface (newwan).
The intention is to route most internet traffic over the new route/interface (newwan) but keep our existing VPNs using the former interface (outside).
I used the ASDM GUI to make the changes and most of it works.ie. The default route goes via (newwan). Outgoing VPNs of a site to site nature use the previous route via (outside) as they now have static routes to achieve this.
The only problem is that incomming Remote Access Anyconnect VPNs are not working. I set the default static route to use the new interface (newwan) and the default tunneled route to be via (outside) but this is the point is goes wrong....
I can no longer ping the outside IP address from an external location. It seems the outside interface does not send traffic back to the - outside interface (or at least that's where I think the problem lies). How do I force replies to the incomming VPN remote traffic from unknown IPs to go back out on the outside interface?
The only change I need to make to get everything working on the outside interface again is to make the Default Static route use the outside interface. Which puts all the internet traffic back on the original (outside) connection.
View 6 Replies
View Related
Aug 28, 2012
Is it possible to configure a Westell 6200 DSL modem to accept access via a remote PC? I have a security camera that can be viewed via remote computer access, but I cannot configure my modem to accept a remote access.
View 3 Replies
View Related
Jun 21, 2011
It seemed that show vpn-sessiondb ra-ikev1-ipsec will not provide the client type of the remote vpn user as show vpn-sessiondb remote did before.
Is there a way to find it out on ASA running 8.3?
View 1 Replies
View Related
Mar 22, 2011
I am configuring remote access VPN on a cisco router 3845. Works fine.
I was looking for configuring session and idle time configuration for groups and eventually users.
I am using the following Cisco VPN remote access configuration :
crypto isakmp client configuration group mygroup
key xxx
pool mypool
acl 101
max-logins 3
banner ^CHelloo ^C
Is there any command in cisco ios similar to Cisco ASA vpn group 1 session-timeout?
View 1 Replies
View Related
Oct 9, 2012
I am trying to configure RV082 router with Mac Native VPN Client for my remote access. However, no matter what I did, I am not able to make it works. Can any one can give me an example of how to conguration my RV082 router and Mac Book Pro(Mountain Lion)?
View 2 Replies
View Related
Mar 13, 2012
Is there away to configure ACS 4.2 to only allow certain EAP-type of authentication per SSID? For example: SSIDA - only allows EAP-TLS and SSIDB - only allows EAP-PEAP on the same ACS server?
View 1 Replies
View Related
Jan 20, 2012
how to configure bsnl type II modem on my computer. with open source and security too.
View 4 Replies
View Related
Jan 26, 2013
Region : Singapore
Model : TL-WDR4300
Hardware Version : V1
I need to set up remote access to my HDD connected to my WDR4300, so I can always go online when I am out to retrieve the saved files in the HDD. However I have zero knowledge of network setting of the FTP servers, I can gain access when I am home and connected to the Wireless network, but how to gain access remotely.
View 6 Replies
View Related
Sep 6, 2012
I want to use Cisco VPN Client to VPN to my SA520 to manage a UC320W. I can establish a VPN connection to the SA and ping both the SA and a switch that I have on the network, but I cannot ping my UC. I've set up firewall rules to allow ANY-ANY access from LAN-WAN, and a WAN-LAN rule to allow a certain range of IP addresses (the IP addresses assigned from the VPN DHCP pool, in this case, 192.168.12.x) access to the UC.
My SA IP address is 192.168.75.1 and my UC is 192.168.75.2 (I can ping both when I am directly connected to a LAN port on either equipment).
View 1 Replies
View Related
Apr 23, 2013
I would like to setup a VPN to allow employees nomad that connect to our network from outside. Our router is a Cisco SA520 I tried different configurations without success ...Here is the current VPN configuration:I created my users IPSec, I can connect remotely, but I do not have network access ... Unable to access network shares, impossible to ping.
View 1 Replies
View Related
Jun 28, 2012
I am attempting to configure Radius authentication accross a site-to-site VPN for my ASA 5510-01 for remote access.
ASA5510-1 currently has a live site to site to ASA5510-2.
ASA 5510-1 - 10.192.0.253
ASA 5510-2 - 172.16.102.1
DC - 172.16.102.10
ASA5510-01 can ping the DC and vica versa but is unable to authticate when i perform a test. ASA5510-01 can authenticate to a DC on it;s own LAN but not on the remote LAN that DC sits on.
I have double checked the 'Server Secret Key' and ports as well as various users which all work locallly. ASA5510-02 authenticates to DC with no problems.
View 3 Replies
View Related
Nov 28, 2012
I have some LSA type 5, I want to change it from type 5 to type 3 before send to another Area, How can i do it?
View 1 Replies
View Related
Apr 15, 2013
I have some older devices on the network that only support RADIUS (not TACACS) for authentication and would like to have them use SecureACS 5.3
I understand that by default, ACS only supports TACACS for device administration. So I'll get this error when trying RADIUS:
11033 Selected Service type is not Network Access
Description:
RADIUS requests can only be processed by Access Services that are of type Network Access
Resolution Text: Verify that the Service Selection Policy rules are correct
However, even after adjusting the Service Selection rules and seeing hits, I still see the same message in the logs, as if it has no affect.
View 1 Replies
View Related
Mar 11, 2013
I am trying to configure a SRP527W for a remote site.It needs to connect back to our Central Office, (via an ASA) which has several VLANs configured. I have entered the configuration for an IKE policy, and one for an IPSec policy (I can only enter one ip/subnet per IPSec policy)When I try to create a 2nd IPSec policy, if I point to the existing IKE policy, I get an error stating "IKE policy has been used by other IPSec policy".If I try to create a new IKE policy, using a different name, but with the same parameters, it shows an error stating the policy is a replica of an existing policy.If I create a new IKE policy, but use a different pre-shared key, then it is accepted by the 2nd IPSec policy, but that would mean I would have to create 2 seperate tunnels on the ASA, each using a different pre-shared key. I have never needed to do this for any of the other routers we have connected.
View 1 Replies
View Related
Dec 13, 2011
Not sure if my subject is a good decription of the problem or not.
I have an ASA 5520 at my home office and a SonicWALL NSA2400 at my remote office. The remote office has dual internet connections and I wanted to create two seperate VPNs between the devices using each internet connection on the SonicWALL.
I know how to configure this on the SonicWALL, the problem is on the ASA 5520
OK Basic network config
Main Office
ASA Public IP 1.1.1.1
ASA Internal network 192.168.1.0 (VPN source)
Remote office
Public IP 1 2.2.2.2
Public IP 2 3.3.3.3
Iternal network 192.168.2.0 (VPN destination on ASA)
If I have a VPN from the main ASA to either one of the SonicWALL's public IPs everything works fine
If I create 2 VPN tounels from the main ASA, 1 to each public IP on the SonicWALL, the VPN shows as up but no traffic flows.
View 1 Replies
View Related
Mar 19, 2012
how can you configure remote vpn ipsec tunnel on a Cisco 800 router?
View 12 Replies
View Related
Jun 20, 2012
I've configured an srp541w router for a customer and successfully configured an IPSEC VPN connection with a Netopia router at a satellite office for the customer.
I cannot seem to find a way to configure either a PPTP VPN connection or QuickVPN connection for remote users. I did read something that stated that the router will only support either a site-to-site VPN or a QuickVPN connection, but not both at the same time.
View 2 Replies
View Related
Feb 7, 2011
Configure dlink router remote desktop?
View 1 Replies
View Related
Jul 5, 2011
I need to configure our ASA5505 firewall for remote access to our network using EasyVPN software installed on a laptop. That laptop will be connected in the different places, using DSL or 3G toggle or Public Wi-Fi. For some people it's very easy, but I don't have any experience with firewalls.
View 9 Replies
View Related
Jun 28, 2012
Can this scenario be done one the cisco 877 router? I have VPN Ipsec up and runing on both site. How can to configure the port forwarding to the remote server over the tunnel? url...
View 16 Replies
View Related
Aug 13, 2011
i am trying to configure static ip on remote client user side , i am using the following doc as an example but i am not getting the ip which i am mentiong in the user .[url]...
View 10 Replies
View Related
Nov 5, 2011
I want to know how to configure my system to connect to Remote Desktop Connection?
View 1 Replies
View Related
Apr 7, 2010
I need to be able to offer Remote Assistance to my mother who is now a good distance away. She has my old XP computer running Windows XP Professional. I'm running Vista 64-bit home premium. We are both using BEFSR41 routers as she wanted to buy what I had been using when I lived with her.
I'm able to get a sesion working between a virtual PC computer running XP Pro on my LAN, but I can't get it to work over the WAN connection (internet). All I can find researching what ports to open is port 3389, which I tried 3 different ways to try to open. Ant correct set up and connection procedure to allow me to receive invites for remote assistance via the internet? I can't send invites either, I tried it just for the heck of it. I'm not sure if this is a NAT problem or a problem with the ports not being opened. Changing from DHCP to static had no effect, and there is only one computer that uses DHCP as I set up the old ones to use static when learning about networking and never changed them back.
Here are some censored screenshots of how my router is configured. I apologize for censoring them, but I don't want to reveal what other ports are open on my router or the configuration of my LAN more than necessary. I don't have any other Windows computers available on my LAN for testing that support Remote Assistance, but I do have an old Win98SE computer. Mom has my aging XP computer for e-mail, web browsing, Office 2003 and that's about it.
[URL]
View 5 Replies
View Related
Nov 4, 2011
How should I configure NX7000 to log acl's hits on a remote syslog server.
View 10 Replies
View Related
Oct 28, 2011
I purchases a Hauppage USB TV tuner and bought the software that allows live TV signals to be streamed to my home PC or android phone. Once I installed the software and ran a test, the remote access failed. The error message said I need to check the router's configuration. I know very little about configuring routers, but the model is WRT54Gv3.
View 1 Replies
View Related
Feb 3, 2013
I'm working with AnyConnect for the first time (my prior experience is with IPSec client) and I have multiple remote users who connect to a 5520 via AnyConnect client; they need to print to each others' shared printers but currently have no connectivity between each other.
Can I configure the 'intra-interface' command to enable connectivity between remote clients, or is there more that needs to be done to enable this, presuming that it can be done at all?
View 3 Replies
View Related
May 7, 2012
I have created remote access vpn in my ASA 5505. The tunnel is established but i am not able to access the internal network.
View 3 Replies
View Related
