Linksys Wireless Router :: Configure WRT54Gv3 To Work With Remote Streaming?
Oct 28, 2011
I purchases a Hauppage USB TV tuner and bought the software that allows live TV signals to be streamed to my home PC or android phone. Once I installed the software and ran a test, the remote access failed. The error message said I need to check the router's configuration. I know very little about configuring routers, but the model is WRT54Gv3.
View 1 Replies
ADVERTISEMENT
Dec 12, 2011
I have a new E1200 router. I VPN from home to my work computer just fine. since I can remotely access the router from work...what setup section of the router would I need to utilize to go backwards and access my home PC thru remote desktop? NAT? if so what are the instructions to do so.
View 1 Replies
View Related
May 6, 2012
How to get HTTPS to work for local or remote management? Selecting HTTPS for either local or remote doesn't enable HTTPS for me. It still use HTTP.
View 2 Replies
View Related
Mar 17, 2012
Is there a way to configure one of the GigE ports on the E4200 to only work on the "guest" network? Basically I have a need to setup one of those ports to get to the Internet, but I don't want it to be able to get to anything else on the private side.
View 1 Replies
View Related
Aug 8, 2012
First time VPN newbie. I need to set up vpn for a friends small business using RV082 so, as a test, I set it up here at my home using a very basic config. The network topology looks like:
cloud => cable modem => RV082 => DIR655 => win7 PC
At a remote site, I fire up QUICKVPN, enter necessary data and successfully connect. Bring up Remote Desktop and put in the IP of my home pc and the logon username and, after a minute or two, it says "unable to connect to the computer" (or words to that effect). My home PC has been configured to allow remote desktop connections and this has occured in the past but not since the RV082 installation. There is nothing in the PC's logs nor in the RV082's logs.
View 1 Replies
View Related
Apr 7, 2010
I need to be able to offer Remote Assistance to my mother who is now a good distance away. She has my old XP computer running Windows XP Professional. I'm running Vista 64-bit home premium. We are both using BEFSR41 routers as she wanted to buy what I had been using when I lived with her.
I'm able to get a sesion working between a virtual PC computer running XP Pro on my LAN, but I can't get it to work over the WAN connection (internet). All I can find researching what ports to open is port 3389, which I tried 3 different ways to try to open. Ant correct set up and connection procedure to allow me to receive invites for remote assistance via the internet? I can't send invites either, I tried it just for the heck of it. I'm not sure if this is a NAT problem or a problem with the ports not being opened. Changing from DHCP to static had no effect, and there is only one computer that uses DHCP as I set up the old ones to use static when learning about networking and never changed them back.
Here are some censored screenshots of how my router is configured. I apologize for censoring them, but I don't want to reveal what other ports are open on my router or the configuration of my LAN more than necessary. I don't have any other Windows computers available on my LAN for testing that support Remote Assistance, but I do have an old Win98SE computer. Mom has my aging XP computer for e-mail, web browsing, Office 2003 and that's about it.
[URL]
View 5 Replies
View Related
Aug 16, 2012
New Router - Setup went easy. Create a folder named Media - copy a few formats in only 6 files all less than 2gb in size, 2 x avi (divx/xvid), mp3, mkv, mp4 and flv. All excited I scoot over to the PS 3 - righto we can do this!! Only to see no titles found. Great stuff Go to router - media server - scan - database updated - awesome let's try again! No titles found. Ok?!? Reboot router - reboot ps3. Still frowning - no titles found?
View 1 Replies
View Related
Aug 5, 2012
When i stream higher resolution videos to my TV or PC, from the usb stick attached to my router(linksys EA4500). The videos freeze, then playes again, then freeze, etc. I have no problem with lower res. videos or music
View 9 Replies
View Related
Jan 8, 2012
I have just upgraded from an E1000 to the E3000 and have run into a couple of problems with my iphone 4s.There are a few applications, BBC iplayer, Sky Go, BBC News and ITV player that wont allow me to watch any of the online video through the iphone. I have iplayer on two other computers running through the same router and they work fine.Every thing worked fine with my old E1000 so I'm taking it that it must be a setting in the router itself somewhere that needs to be altered to allow it to work.
View 6 Replies
View Related
Jan 7, 2013
Been noticing this lately, thought a few times it was just random internet drops outs, but completely crushing bandwidth when streaming is normal for this router.
Its completely obvious when playing a game on xbox live or playing wow or diablo 3 on the pc, when streaming from youtube in 720p or higher the bandwidth is completely crushed. I downloaded a game yesterday also through games for windows marketplace on the pc yesterday and my brother couldn't play diablo 3 while I was downloading. I tried media prioritization and that doesn't fix the problem.
Interestingly enough I still own an E4200 so I hooked that router back up just to see how that handled things. I set my extension on chrome to always play youtube videos at 1080p if availible, and there was no lag or bandwidth crush. I logged onto xbox live while my brother was playing diablo 3 and downloaded a video trailer of a game and no bandwidth crush. Hmm I thought.... So I tried the EA6500 again and the bandwidth crush comes back and my brother can no longer play online games while Im streaming.
At this point Im just gonna suck it up and start using the E4200 again until EA6500 gets a good software update and can perform standard tasks. I have a 20mb download and a 2mb upload should this be happening with a router this expensive?
View 3 Replies
View Related
Nov 11, 2012
I am facing issues with my router EA4500 and my apple TV. When I am watching a video from my itunes library at my PC, sometimes stop playing waiting to receive data. Is that a way to conect my apple tv to my router to prioritize this video streaming from my PC to apple TV?
View 9 Replies
View Related
Dec 5, 2012
I got an Apple TV a few weeks back and we've been using it a lot, especially to stream Netflix. However, another application that I got it for was for streaming iPhoto slideshows and iMovie stuff to the Apple TV with Airplay's screen sharing. This event scenario has played out several times..... Screen sharing is up and going and it'll be working great. All of a sudden the TV will go back to the main Apple TV menu on its own. Upon further review at this point, NONE of my WiFi (iPhone, iPad, etc.) devices will connect to the network and I have to power cycle the router. Router lights are on, but no one's home. At this point, it'll boot back up and then everything will be fine, at least for a while.Tonight, I was showing vacation pictures to some family and this same process happened twice. Since I can't seem to figure out how to stop playing a slideshow in iPhoto and then start it again in the middle, it's very annoying. Here are some relevant troubleshooting points to consider:
1. This network problem (or something similar to it) has happened in the past, but whatever it is, streaming a slideshow really seems to aggravate it. This seems to be the only scenario that I can do to actually INDUCE the issue. Periods of long uploads or downloads are fine. Streaming audio from one device and similar usage seems to be fine, but this scenario fails pretty much every time, and not necessarily right away.
2. After having this issue tonight multiple times, I stopped trying to stream an actual iPhoto slideshow and just went into the album and scrolled through the pics one by one. I did this for at least an hour with no issue. But with an actual slideshow, it failed twice in 30 minutes or less. And it's happened before tonight as well.
3. It doesn't appear to make a difference what application I'm streaming from on the Mac. Whether it's iPhoto, iMovie, or even Facetime.
-MacBook Pro Specs - OS X 10.8.2 - Late 2011 Model
-Apple TV - MD199LL/A, v5.0.2
-Router - Linksys/Cisci E1000 - Firmware v2.1.02
I've got a fair amount of devices in my home that use WiFi, but there was nothing irregular going on in the house to generate an excessive amount of internal network traffic or anything like that. My gut says the problem is with the router, but it's only a few months old, and I've updated the firmware to no avail.
View 9 Replies
View Related
Mar 5, 2012
Basically the problem is that the HD media steamed through the E4200 router has a significant lag on the TV. So details..I have the Linksys E4200 wifi router and want to stream the HD video from my computer to TV.The connection schema is pretty straightforward:Computer with 10/100 mbit network adapter-----(network cable)-->E4200----(WIFI)----->TV with 802.11n WIFI adapter.Also 10(ten) mbit Internet connection cable is plugged into WIFI router. The questions are:
1) Can the 10 mbit internet connection affect the speed of the media content being streamed through the E4200 router?
2) Does it make sense to buy the WIFI 802.11 n adapter and use it instead of the network adapter / cable in the connection schema mentioned above?
3) What can be other possible reasons of the lag?
View 2 Replies
View Related
Jan 9, 2011
I am very pleased with my purchase of the E3000 so far. However, one function seems to allude me. One of the main reasons for purchasing this router was because of its Media Server functionality. I wanted to be able to stream to my UPnP devices (ps3, xbox360, etc) without having to keep my power hog of a PC running. I have set up the HD using the Storage tab of the Advanced Router Settings, and created several Shares on the Media Server tab. The good news is that I am able to access the share on my PS3. The bad news is that I can't on my Xbox360s. As the Xbox360s has built in wireless N, I would really like to be able to stream to that system.
View 8 Replies
View Related
Aug 1, 2011
When we stream movies in two different rooms at the same time we drop our netflix or vudu connections. Can I enable or disable any settings on my router that would work. I love this router have 35 Mbps on internet speed so I don't think that is the problem. Range runs from 35 up to 45 Mbps all the time. I know how to access my router settings and navigate where to go and what to change if I can. I have 3 laptops, 1 wireless printer, two blue-ray devices attached.
View 7 Replies
View Related
Mar 25, 2012
When I try to stream a movie through the media server or through my computer to my xbox 360 the video will play fine for a couple minutes then it well get choppy and then the sound will not sync with the picture. I have the latest firmware and reset it also. Tried switching channels and changed mtu didn't do anything. tried steaming on 2 different xboxs and its the same thing.
View 3 Replies
View Related
Dec 5, 2011
I upgraded my E3000 to a new E4200 several months ago. I use an SSL VPN to connect to work which worked fine on 1.0.01 and 1.0.02 but I upgraded to 1.0.03 to fix an issue where the router constantly reboots when I stream Netflix or Hulu and now the router reboots with Netflix, Hulu AND the SSL VPN tunnel initiation.
View 6 Replies
View Related
Jan 13, 2013
The new firmware is killing the video streaming performance I have to revert to the old firmware Ver.1.1.28.146072 to be able to stream videos from the media server. I have been waiting a long time for a decent Firmware that will fix the multiple issues with this router but this is ridiculous every new firmware update brings more issues to the table I am feed up with the Cisco developers I have a WRT610N router that is performing better than this lemon router that Cisco just introduced in 2012.
View 2 Replies
View Related
Feb 27, 2010
I just got a linksys after years of using a single netgear, this is the second we've gotten in the last month... But each time we have the same problem, the thing resets constantly while doing streaming from netflix, over wifi, and resets the entire router. I've updated to the latest firmware but i'm ready to just throw this out and put our old netgear back up.
View 4 Replies
View Related
Nov 28, 2011
I currently upgraded to E3200 wireless router from my previous WRT610. I use itunes/apple airport express to play music located on a Buffalo NAS (LAN connection to E3200) on my home stereo. Before upgrading I was able to do this without a problem. Any suggestions for improving performance with streaming music at home? Internet/access to files on Buffalo NAS wirelessly works fine.
View 2 Replies
View Related
May 14, 2012
I have here a canyon wireless router. do you know where I can find online a tutorial or manual on how to configure a wireless router so that it acts as a repeater?
View 3 Replies
View Related
Feb 4, 2013
So I am trying to forward a port on my linksys E2500 router. I need to forward 198.162.17.3 for a video streaming server. When I go to the admin panel I am only able to change the last digit, ie 198.162.1.x
View 5 Replies
View Related
Jan 3, 2013
Basically I use the WDTV to stream movies from my PC and external harddrive (which is plugged straight into the router) to my TV. The WDTV has a "Network Shares" section and my PC and harddrive usually appear here.
The only way I can get them to show is to reboot the router each time I want to use the WDTV player.
Is there a setting on the router which I need to enable/disable which will prevent the network shares drop?
View 9 Replies
View Related
Jan 2, 2012
Video streaming was fine until I upgraded the firmware. Is it possible to downgrade the firmware?
View 3 Replies
View Related
Dec 2, 2011
I have a philips tv 9000, qnap 210, twonky and e2000. When i using my e2000( wireless/cable) the tv stops playing the vids after 5 min.When i using un very old smc router there's no problem.
View 6 Replies
View Related
Oct 18, 2011
Got my E4200 a month ago, and have since been experiencing problems with movie streaming between my server and my Popcorn Hour A110. All kinds of movies stutters randomly and becomes unwatchable. Streaming of the same movie from my server to my laptop (connected wirelessly) causes no stuttering.
I have been doing some troubleshooting and determined that it is not the server's fault (it achieves transfer speeds of 60+ MB/s through Samba). I have also ruled out the possibility that the Popcorn Hour is the faulty component.
Lastly, I just tried switching from the E4200 to my old D-Link DIR-655. This has effectively removed the stuttering, leading me to conclude that it is the E4200's fault.
View 6 Replies
View Related
Aug 10, 2012
I have latest 3.3 dlink d-view cam software and a dcs-932l ip camera.I noticed the remote streaming and remote recorded viewing (ports 5150 and 5160) as part of the server software. I know if i browse to my ip of my pc it allows me to view both services on html via windows plugin visual basic addon. My question is what iOS app and Mac OS X app will allow me to remotely monitor my dviewcam softwares network service for both live view and recorded view.
View 1 Replies
View Related
Apr 21, 2007
I'm trying to configure my WAG200G to work in bridge mode so that it can transfer my external IP address to my ISA server.My network map is very simple,Internet -- WAG200G -- ISA Server -- LANCan
View 7 Replies
View Related
Sep 16, 2011
Right now I have it connected like this: Internet-> SURFboard SB6120 Modem -> DGL-4100 Router (modem in the WAN port, 3 internet connections plus the switch in the LAN ports) -> DGS-1008G Switch (2 other internet connections connected to this, as well as an Xbox 360).The problem is that everything connecting to the router works, and nothing works on the switch even though the power light is on (however, the port on the router that is receiving the switch is not lit up). I'm guessing this is because the router only assigns as many IP addresses as it has ports or something.
View 10 Replies
View Related
Jun 6, 2011
I need to make sure I have a router available to work with DS3 circuit on remote site. A remote field technician tells me there is a 3745 router with "HSSI" and external Adtran CSU/DSU available. Is that an indication this can work with DS-3 circuit?Which specific Adtran CSU/DSU do I need in order to make it work with DS3?
View 1 Replies
View Related
Feb 7, 2011
Configure dlink router remote desktop?
View 1 Replies
View Related
Mar 19, 2012
how can you configure remote vpn ipsec tunnel on a Cisco 800 router?
View 12 Replies
View Related
Oct 9, 2012
I am trying to configure RV082 router with Mac Native VPN Client for my remote access. However, no matter what I did, I am not able to make it works. Can any one can give me an example of how to conguration my RV082 router and Mac Book Pro(Mountain Lion)?
View 2 Replies
View Related