I have a philips tv 9000, qnap 210, twonky and e2000. When i using my e2000( wireless/cable) the tv stops playing the vids after 5 min.When i using un very old smc router there's no problem.
View 6 RepliesThe Port 80 port fowarding stops functioning after a few hours and requires the router to be rebooted to start forwarding again. The firmeware is the latest 1.0.04 Build 7. I require it to operate reliably for many days without intervention. I assume that it is a port forwarding problem because I can access the IP on my network from within my network even when I can't access it from outside my network. I am using the correct IP addresses as it sometimes works OK. A characteristic is that when I can't access the page it loads as completely blank white with no error message.
View 2 Replies View RelatedFor some time now I've used the USB port on RSP440's fitted into ASR9006's to load IOS with no problems.Recently I noticed that the ASR9001 USB port doesn't seem to work at all, which seems odd to me as I believe the 9001 uses the same card built into the chassis.All routers were running the same code version 4.3.0, and I was using the same memory stick?
View 1 Replies View RelatedWe have ASR 1006 with IOS XE and i want to see the Software License but somehow i cant!!! ...i googled it but i could not find anything.how can i see the available license on ASR 1006 or 9000 series?
View 1 Replies View RelatedI am in a small office and we have a Buffalo NAS being used. Configuring it was fairly easy, but recently it just stop letting us have web access. My External and Internal Ports were 9000, but for some reason now my router will not even show that there is a 9000 port and even if I port forward it. It does no good what good possibly be keeping this port invisible after it was being used the last couple of months. I called my cable company and they said they are not blocking it. But right now I cant access the server from a remote location.
View 4 Replies View RelatedI'm looking to setup a few ip security cameras in my house and would like to monitor from work. The first thing I did was give the ip camera a static ip on my local LAN 192.168.1.104. I also forwarded port 9000 to this ip. I then went to [URL] to look up my external ip address. I was able to obtain one ip for my router and another for my modem (disconnected router and went direct through modem).
I've since tried to ping my router WAN ip from work numerous times via http://24.x.xxx.xx:9000 and I get timeout errors. I've tried traceroute and it gets close, but times out the last 3 hops. I've had Comcast on the phone many times trying to resolve and needless to say they weren't able to work.
I have successfully created a wired conection to the above router on my pc (Windows XP), but can't go to the next stage and create a wireless connection. I have installed the USB connector, and my network can be seen with excellent signal strength.
It does not appear in the list that Windows asks for though.
'Network Connections' has status: 'Started'; and WZC status: 'Automatic'.
I have installed security as well. I don't know if this makes a difference (I am using a Virginmedia cable modem) but when I input my Mac address and hit 'Clone Mac Address' it brings up a different Mac address. Should I suppress this to my Mac address or continue?
Have a E4200 with version 1.0.04 firmware.Been trying to open 9000 to access my buffalo media server remotely. Have set up both Single Port and Port Range Forwarding for port 9000.On trying to access media server, get message " could not connect to xxx.xxx.x.xxx:9000"Using online Open Ports Checkers shows this port is closed.
- Tried disabling all firewalls.
- tried range of ports
- Enabled/Disabled UPnP
- tried cisco & buffalo tech support
I have a Dell Studio PC with a Dell Wireless 1397 WLAN Mini-Card. OS is Windows 7 with SP1. Intel Core 2 Duo T5800 2.00 GHz
In general I have no problems with my WIFI with simple browsing and most of my routine activities online. But any time I stream video (like youtube), music or download a large file, my WIFI spontaneously turns off. I need to either restart the computer or put the computer to sleep/wake it up for the WIFI to work again.
I have the latest drivers for the Wireless card. I scanned the forums and didn't see this problem reported elsewhere. I realize this is an old computer so I may have to install an external wireless adaptor, but I wanted to ask around before doing so.
New Router - Setup went easy. Create a folder named Media - copy a few formats in only 6 files all less than 2gb in size, 2 x avi (divx/xvid), mp3, mkv, mp4 and flv. All excited I scoot over to the PS 3 - righto we can do this!! Only to see no titles found. Great stuff Go to router - media server - scan - database updated - awesome let's try again! No titles found. Ok?!? Reboot router - reboot ps3. Still frowning - no titles found?
View 1 Replies View RelatedWhen i stream higher resolution videos to my TV or PC, from the usb stick attached to my router(linksys EA4500). The videos freeze, then playes again, then freeze, etc. I have no problem with lower res. videos or music
View 9 Replies View RelatedI have just upgraded from an E1000 to the E3000 and have run into a couple of problems with my iphone 4s.There are a few applications, BBC iplayer, Sky Go, BBC News and ITV player that wont allow me to watch any of the online video through the iphone. I have iplayer on two other computers running through the same router and they work fine.Every thing worked fine with my old E1000 so I'm taking it that it must be a setting in the router itself somewhere that needs to be altered to allow it to work.
View 6 Replies View RelatedBeen noticing this lately, thought a few times it was just random internet drops outs, but completely crushing bandwidth when streaming is normal for this router.
Its completely obvious when playing a game on xbox live or playing wow or diablo 3 on the pc, when streaming from youtube in 720p or higher the bandwidth is completely crushed. I downloaded a game yesterday also through games for windows marketplace on the pc yesterday and my brother couldn't play diablo 3 while I was downloading. I tried media prioritization and that doesn't fix the problem.
Interestingly enough I still own an E4200 so I hooked that router back up just to see how that handled things. I set my extension on chrome to always play youtube videos at 1080p if availible, and there was no lag or bandwidth crush. I logged onto xbox live while my brother was playing diablo 3 and downloaded a video trailer of a game and no bandwidth crush. Hmm I thought.... So I tried the EA6500 again and the bandwidth crush comes back and my brother can no longer play online games while Im streaming.
At this point Im just gonna suck it up and start using the E4200 again until EA6500 gets a good software update and can perform standard tasks. I have a 20mb download and a 2mb upload should this be happening with a router this expensive?
I am facing issues with my router EA4500 and my apple TV. When I am watching a video from my itunes library at my PC, sometimes stop playing waiting to receive data. Is that a way to conect my apple tv to my router to prioritize this video streaming from my PC to apple TV?
View 9 Replies View RelatedI got an Apple TV a few weeks back and we've been using it a lot, especially to stream Netflix. However, another application that I got it for was for streaming iPhoto slideshows and iMovie stuff to the Apple TV with Airplay's screen sharing. This event scenario has played out several times..... Screen sharing is up and going and it'll be working great. All of a sudden the TV will go back to the main Apple TV menu on its own. Upon further review at this point, NONE of my WiFi (iPhone, iPad, etc.) devices will connect to the network and I have to power cycle the router. Router lights are on, but no one's home. At this point, it'll boot back up and then everything will be fine, at least for a while.Tonight, I was showing vacation pictures to some family and this same process happened twice. Since I can't seem to figure out how to stop playing a slideshow in iPhoto and then start it again in the middle, it's very annoying. Here are some relevant troubleshooting points to consider:
1. This network problem (or something similar to it) has happened in the past, but whatever it is, streaming a slideshow really seems to aggravate it. This seems to be the only scenario that I can do to actually INDUCE the issue. Periods of long uploads or downloads are fine. Streaming audio from one device and similar usage seems to be fine, but this scenario fails pretty much every time, and not necessarily right away.
2. After having this issue tonight multiple times, I stopped trying to stream an actual iPhoto slideshow and just went into the album and scrolled through the pics one by one. I did this for at least an hour with no issue. But with an actual slideshow, it failed twice in 30 minutes or less. And it's happened before tonight as well.
3. It doesn't appear to make a difference what application I'm streaming from on the Mac. Whether it's iPhoto, iMovie, or even Facetime.
-MacBook Pro Specs - OS X 10.8.2 - Late 2011 Model
-Apple TV - MD199LL/A, v5.0.2
-Router - Linksys/Cisci E1000 - Firmware v2.1.02
I've got a fair amount of devices in my home that use WiFi, but there was nothing irregular going on in the house to generate an excessive amount of internal network traffic or anything like that. My gut says the problem is with the router, but it's only a few months old, and I've updated the firmware to no avail.
Basically the problem is that the HD media steamed through the E4200 router has a significant lag on the TV. So details..I have the Linksys E4200 wifi router and want to stream the HD video from my computer to TV.The connection schema is pretty straightforward:Computer with 10/100 mbit network adapter-----(network cable)-->E4200----(WIFI)----->TV with 802.11n WIFI adapter.Also 10(ten) mbit Internet connection cable is plugged into WIFI router. The questions are:
1) Can the 10 mbit internet connection affect the speed of the media content being streamed through the E4200 router?
2) Does it make sense to buy the WIFI 802.11 n adapter and use it instead of the network adapter / cable in the connection schema mentioned above?
3) What can be other possible reasons of the lag?
I am very pleased with my purchase of the E3000 so far. However, one function seems to allude me. One of the main reasons for purchasing this router was because of its Media Server functionality. I wanted to be able to stream to my UPnP devices (ps3, xbox360, etc) without having to keep my power hog of a PC running. I have set up the HD using the Storage tab of the Advanced Router Settings, and created several Shares on the Media Server tab. The good news is that I am able to access the share on my PS3. The bad news is that I can't on my Xbox360s. As the Xbox360s has built in wireless N, I would really like to be able to stream to that system.
View 8 Replies View RelatedI purchases a Hauppage USB TV tuner and bought the software that allows live TV signals to be streamed to my home PC or android phone. Once I installed the software and ran a test, the remote access failed. The error message said I need to check the router's configuration. I know very little about configuring routers, but the model is WRT54Gv3.
View 1 Replies View RelatedWhen we stream movies in two different rooms at the same time we drop our netflix or vudu connections. Can I enable or disable any settings on my router that would work. I love this router have 35 Mbps on internet speed so I don't think that is the problem. Range runs from 35 up to 45 Mbps all the time. I know how to access my router settings and navigate where to go and what to change if I can. I have 3 laptops, 1 wireless printer, two blue-ray devices attached.
View 7 Replies View RelatedWhen I try to stream a movie through the media server or through my computer to my xbox 360 the video will play fine for a couple minutes then it well get choppy and then the sound will not sync with the picture. I have the latest firmware and reset it also. Tried switching channels and changed mtu didn't do anything. tried steaming on 2 different xboxs and its the same thing.
View 3 Replies View RelatedI upgraded my E3000 to a new E4200 several months ago. I use an SSL VPN to connect to work which worked fine on 1.0.01 and 1.0.02 but I upgraded to 1.0.03 to fix an issue where the router constantly reboots when I stream Netflix or Hulu and now the router reboots with Netflix, Hulu AND the SSL VPN tunnel initiation.
View 6 Replies View RelatedThe new firmware is killing the video streaming performance I have to revert to the old firmware Ver.1.1.28.146072 to be able to stream videos from the media server. I have been waiting a long time for a decent Firmware that will fix the multiple issues with this router but this is ridiculous every new firmware update brings more issues to the table I am feed up with the Cisco developers I have a WRT610N router that is performing better than this lemon router that Cisco just introduced in 2012.
View 2 Replies View RelatedI just got a linksys after years of using a single netgear, this is the second we've gotten in the last month... But each time we have the same problem, the thing resets constantly while doing streaming from netflix, over wifi, and resets the entire router. I've updated to the latest firmware but i'm ready to just throw this out and put our old netgear back up.
View 4 Replies View RelatedI currently upgraded to E3200 wireless router from my previous WRT610. I use itunes/apple airport express to play music located on a Buffalo NAS (LAN connection to E3200) on my home stereo. Before upgrading I was able to do this without a problem. Any suggestions for improving performance with streaming music at home? Internet/access to files on Buffalo NAS wirelessly works fine.
View 2 Replies View RelatedSo I am trying to forward a port on my linksys E2500 router. I need to forward 198.162.17.3 for a video streaming server. When I go to the admin panel I am only able to change the last digit, ie 198.162.1.x
View 5 Replies View RelatedBasically I use the WDTV to stream movies from my PC and external harddrive (which is plugged straight into the router) to my TV. The WDTV has a "Network Shares" section and my PC and harddrive usually appear here.
The only way I can get them to show is to reboot the router each time I want to use the WDTV player.
Is there a setting on the router which I need to enable/disable which will prevent the network shares drop?
Video streaming was fine until I upgraded the firmware. Is it possible to downgrade the firmware?
View 3 Replies View RelatedRegion : Sweden
Model : TL-WR842ND
Hardware Version : V1
Philips support says it has to do with the router, firewall or something. Not much good from them. But I dont know anything about firewalls or anything, all I know is that my wireless internet works fine and that the TV is linked with the router but doesn't access internet. Streaming from pc to tv works fine though
Got my E4200 a month ago, and have since been experiencing problems with movie streaming between my server and my Popcorn Hour A110. All kinds of movies stutters randomly and becomes unwatchable. Streaming of the same movie from my server to my laptop (connected wirelessly) causes no stuttering.
I have been doing some troubleshooting and determined that it is not the server's fault (it achieves transfer speeds of 60+ MB/s through Samba). I have also ruled out the possibility that the Popcorn Hour is the faulty component.
Lastly, I just tried switching from the E4200 to my old D-Link DIR-655. This has effectively removed the stuttering, leading me to conclude that it is the E4200's fault.
I can connect to my router but either way it seems like i can't get any internet access (both wireless and by cable): url...I have tried the steps that the linksys FAQ suggests shall fix this problem, but this has not worked. I have also tried to reset the router without any luck. I know it its not the modem that is causing the problem because I'm wired to it now.On the E2000 every light is blinking as it should be (hence the FAQ) so it indicates that there might be a problem with the connection between the router and the computer (tested on other computers too without success).
View 9 Replies View RelatedI would like to set the router's dns entries but I don't see how to do that. Basic setup page has DNS setep for the DHCP scope but I don't want to push dns to my pc's. What I am looking to do is to use an alternate dns to what my service provder pushes and still have the abliity to route on my internal network.
View 1 Replies View RelatedWe bought our Linksys E2000 in the summer and went to set it up but something came up... Now we are trying to set it up but cannot find our WPA key... Where can we find this?
View 2 Replies View RelatedSo i can only forward 10 ports on my E2000.Example, one game (Battlefield 3) requires 10 ports (TCP and UDP combined).What about my other games? how can one, if possible, add more ports to the router?
View 4 Replies View Related