I currently upgraded to E3200 wireless router from my previous WRT610. I use itunes/apple airport express to play music located on a Buffalo NAS (LAN connection to E3200) on my home stereo. Before upgrading I was able to do this without a problem. Any suggestions for improving performance with streaming music at home? Internet/access to files on Buffalo NAS wirelessly works fine.
View 2 Replies
We have Cisco WAP4410N-G5 with firmware 2.0.4.2 and two notebooks with 802.11n adapters (Intel Centrino N130 and Ralink RT3090).Network scheme: Server 1Gbit LAN <> Gigabit switch <> WAP4410N <> notebooks. On server we have samba, http and FTP.We tried to download file from server via http/ftp and samba and the maximum speed we get about 23 Mbit/s. It is really very poor performance for 802.11n standard.We tried different firmware versions for WAP4410N and settings (20 and 40 MHz, N only and etc).We replaced WAP4410N with WRT610N and get about 85-100Mbit/s in the same enviroment.
View 1 Replies View RelatedSo I got 8MB/1MB internet at home and so far I haven't been able to fix the problem I have: if I watch youtube and try to play pretty much any game that uses internet, i go from 70ms ping to 300ms++ instantly. Even if only two computers are on and both have the same game on, just opening a Google Chrome with one youtube tab on causes a HUGE ping. Two computers with youtube and CS 1.6 on shouldn't cause that.My setup is as following: old ZyXel ADSL-modem 660 series with one LAN port and web config (so it has settings to be modify) and a Linksys WRT54GL with DD-WRT v23. All computers I use run either 32-bit Windows 7, Vista or XP. However, it doesn't matter which computers I use; I've tried this with more than 5 computers already. All cables have also been tested and changed.
View 1 Replies View RelatedI want to separate my house in three zones plus guest W LAN. One for my mother in law living upstairs, One Gega-net for my family and one for my own little company office. Additionally I want W LAN on three of the V LAN's in addition to one guest W LAN.
And I want remote access to my music on the family LAN and my documents on the office LAN.
Can I accomplish this with one (W LAN)router or do I need more equipment?
New Router - Setup went easy. Create a folder named Media - copy a few formats in only 6 files all less than 2gb in size, 2 x avi (divx/xvid), mp3, mkv, mp4 and flv. All excited I scoot over to the PS 3 - righto we can do this!! Only to see no titles found. Great stuff Go to router - media server - scan - database updated - awesome let's try again! No titles found. Ok?!? Reboot router - reboot ps3. Still frowning - no titles found?
View 1 Replies View RelatedWhen i stream higher resolution videos to my TV or PC, from the usb stick attached to my router(linksys EA4500). The videos freeze, then playes again, then freeze, etc. I have no problem with lower res. videos or music
View 9 Replies View RelatedI have just upgraded from an E1000 to the E3000 and have run into a couple of problems with my iphone 4s.There are a few applications, BBC iplayer, Sky Go, BBC News and ITV player that wont allow me to watch any of the online video through the iphone. I have iplayer on two other computers running through the same router and they work fine.Every thing worked fine with my old E1000 so I'm taking it that it must be a setting in the router itself somewhere that needs to be altered to allow it to work.
View 6 Replies View RelatedBeen noticing this lately, thought a few times it was just random internet drops outs, but completely crushing bandwidth when streaming is normal for this router.
Its completely obvious when playing a game on xbox live or playing wow or diablo 3 on the pc, when streaming from youtube in 720p or higher the bandwidth is completely crushed. I downloaded a game yesterday also through games for windows marketplace on the pc yesterday and my brother couldn't play diablo 3 while I was downloading. I tried media prioritization and that doesn't fix the problem.
Interestingly enough I still own an E4200 so I hooked that router back up just to see how that handled things. I set my extension on chrome to always play youtube videos at 1080p if availible, and there was no lag or bandwidth crush. I logged onto xbox live while my brother was playing diablo 3 and downloaded a video trailer of a game and no bandwidth crush. Hmm I thought.... So I tried the EA6500 again and the bandwidth crush comes back and my brother can no longer play online games while Im streaming.
At this point Im just gonna suck it up and start using the E4200 again until EA6500 gets a good software update and can perform standard tasks. I have a 20mb download and a 2mb upload should this be happening with a router this expensive?
I am facing issues with my router EA4500 and my apple TV. When I am watching a video from my itunes library at my PC, sometimes stop playing waiting to receive data. Is that a way to conect my apple tv to my router to prioritize this video streaming from my PC to apple TV?
View 9 Replies View RelatedI got an Apple TV a few weeks back and we've been using it a lot, especially to stream Netflix. However, another application that I got it for was for streaming iPhoto slideshows and iMovie stuff to the Apple TV with Airplay's screen sharing. This event scenario has played out several times..... Screen sharing is up and going and it'll be working great. All of a sudden the TV will go back to the main Apple TV menu on its own. Upon further review at this point, NONE of my WiFi (iPhone, iPad, etc.) devices will connect to the network and I have to power cycle the router. Router lights are on, but no one's home. At this point, it'll boot back up and then everything will be fine, at least for a while.Tonight, I was showing vacation pictures to some family and this same process happened twice. Since I can't seem to figure out how to stop playing a slideshow in iPhoto and then start it again in the middle, it's very annoying. Here are some relevant troubleshooting points to consider:
1. This network problem (or something similar to it) has happened in the past, but whatever it is, streaming a slideshow really seems to aggravate it. This seems to be the only scenario that I can do to actually INDUCE the issue. Periods of long uploads or downloads are fine. Streaming audio from one device and similar usage seems to be fine, but this scenario fails pretty much every time, and not necessarily right away.
2. After having this issue tonight multiple times, I stopped trying to stream an actual iPhoto slideshow and just went into the album and scrolled through the pics one by one. I did this for at least an hour with no issue. But with an actual slideshow, it failed twice in 30 minutes or less. And it's happened before tonight as well.
3. It doesn't appear to make a difference what application I'm streaming from on the Mac. Whether it's iPhoto, iMovie, or even Facetime.
-MacBook Pro Specs - OS X 10.8.2 - Late 2011 Model
-Apple TV - MD199LL/A, v5.0.2
-Router - Linksys/Cisci E1000 - Firmware v2.1.02
I've got a fair amount of devices in my home that use WiFi, but there was nothing irregular going on in the house to generate an excessive amount of internal network traffic or anything like that. My gut says the problem is with the router, but it's only a few months old, and I've updated the firmware to no avail.
Basically the problem is that the HD media steamed through the E4200 router has a significant lag on the TV. So details..I have the Linksys E4200 wifi router and want to stream the HD video from my computer to TV.The connection schema is pretty straightforward:Computer with 10/100 mbit network adapter-----(network cable)-->E4200----(WIFI)----->TV with 802.11n WIFI adapter.Also 10(ten) mbit Internet connection cable is plugged into WIFI router. The questions are:
1) Can the 10 mbit internet connection affect the speed of the media content being streamed through the E4200 router?
2) Does it make sense to buy the WIFI 802.11 n adapter and use it instead of the network adapter / cable in the connection schema mentioned above?
3) What can be other possible reasons of the lag?
1. WUMC710 data rates fluctuate extremly under OSX 10.8.2 with an iMac 27" . Meaning, one second, I have about 9 mb/s in the other second, I have 20 mb/s. It is fluctuating permenently. When I use another bridge, eg. ASUS EA-N66, the datarate is very stable and I can see no major fluctuation.
2. The overall datarate when using the WUMC710 with OSX is about 50% less, than with Windows7. I have windows 7 installed as a virtual machine on my iMac. When transfering a file to my NAS device, under OSX, I have an average datarate of 18 mb/s. When I transfer the exact same file with win 7 as a virtual machine on this iMac, I have 35mb/s on average!!!!! When I use another bridge, eg. ASUS EA-N66, the datarate is the same on OSX and on windows.
3. The low datarate and the fluctuations also appear in combination with an other router, so it must be something with the WUMC710. I tested it with the EA6500 and ASUS RT-AC66U.
What I have done:
- Tested with two other adatpers (ASUS EA-N66 and built in Apple Airport). Both show constant and high datarates, so the problems only appear with the WUMC710.
- Tested with another router. The low datarate and the fluctuations also appear in combination with an other router, so it must be something with the WUMC710. I tested it with the EA6500 and ASUS RT-AC66U.
- Tested with another OSX device. Same problems with an iMac 27" and with a MacBook Pro. So not a specific problem with one apple device
- Tested with another windows device. Under windows, the WUMC710 shows way better performance and nearly no flucuations in data rates.As I have tested other Wireless adapters, combinations with other routers and other OSX/Win devices and the problems are alyways the same, It must be a bug of the WUMC710. Performance under OSX 10.8.2 is slow and not constant.
I am very pleased with my purchase of the E3000 so far. However, one function seems to allude me. One of the main reasons for purchasing this router was because of its Media Server functionality. I wanted to be able to stream to my UPnP devices (ps3, xbox360, etc) without having to keep my power hog of a PC running. I have set up the HD using the Storage tab of the Advanced Router Settings, and created several Shares on the Media Server tab. The good news is that I am able to access the share on my PS3. The bad news is that I can't on my Xbox360s. As the Xbox360s has built in wireless N, I would really like to be able to stream to that system.
View 8 Replies View RelatedI purchases a Hauppage USB TV tuner and bought the software that allows live TV signals to be streamed to my home PC or android phone. Once I installed the software and ran a test, the remote access failed. The error message said I need to check the router's configuration. I know very little about configuring routers, but the model is WRT54Gv3.
View 1 Replies View RelatedWhen we stream movies in two different rooms at the same time we drop our netflix or vudu connections. Can I enable or disable any settings on my router that would work. I love this router have 35 Mbps on internet speed so I don't think that is the problem. Range runs from 35 up to 45 Mbps all the time. I know how to access my router settings and navigate where to go and what to change if I can. I have 3 laptops, 1 wireless printer, two blue-ray devices attached.
View 7 Replies View RelatedWhen I try to stream a movie through the media server or through my computer to my xbox 360 the video will play fine for a couple minutes then it well get choppy and then the sound will not sync with the picture. I have the latest firmware and reset it also. Tried switching channels and changed mtu didn't do anything. tried steaming on 2 different xboxs and its the same thing.
View 3 Replies View RelatedI upgraded my E3000 to a new E4200 several months ago. I use an SSL VPN to connect to work which worked fine on 1.0.01 and 1.0.02 but I upgraded to 1.0.03 to fix an issue where the router constantly reboots when I stream Netflix or Hulu and now the router reboots with Netflix, Hulu AND the SSL VPN tunnel initiation.
View 6 Replies View RelatedThe new firmware is killing the video streaming performance I have to revert to the old firmware Ver.1.1.28.146072 to be able to stream videos from the media server. I have been waiting a long time for a decent Firmware that will fix the multiple issues with this router but this is ridiculous every new firmware update brings more issues to the table I am feed up with the Cisco developers I have a WRT610N router that is performing better than this lemon router that Cisco just introduced in 2012.
View 2 Replies View RelatedI just got a linksys after years of using a single netgear, this is the second we've gotten in the last month... But each time we have the same problem, the thing resets constantly while doing streaming from netflix, over wifi, and resets the entire router. I've updated to the latest firmware but i'm ready to just throw this out and put our old netgear back up.
View 4 Replies View RelatedI recently purchased an EA4500. It started out working really well, but recently I noticed that my speed on my iPhone and iPad has dropped significantly. When I'm in my office where the router is set up, I'm getting around 15 to 20 mb download speed and 5+ upload speed. When I go to my living room about 40 feet away my speed drops to 1mb down and less than 1 up. I expect to see a drop in my performance the further away I get from the router, but this seems really unacceptable to me.
View 1 Replies View RelatedJust bought the EA4500, updated with the latest cloud firmware. but Wan performace is BAD. download with router 31.56Mbps, without approx 120 Mbps, tried changing MTU from auto to 1470 but no succes.
View 9 Replies View RelatedIs this the best way to get maximum performance and coverage? I have a DIR-655 bridged to supply B/G on channel 11.I Gave Up On Linksys Firmware And Installed DD-WRT.
View 4 Replies View RelatedThe wireless connection barely registers in the Speed Test within Cisco Connect - .56 download, 5.35 upload. A cable connection gives 2.4 download and 5.5 upload. The E900 is not far from the computer with no obstacles between.Is the wireless portion of the E900 set up improperly? Is there anything I can do to improve the wireless performance?
View 4 Replies View RelatedSo I am trying to forward a port on my linksys E2500 router. I need to forward 198.162.17.3 for a video streaming server. When I go to the admin panel I am only able to change the last digit, ie 198.162.1.x
View 5 Replies View RelatedBasically I use the WDTV to stream movies from my PC and external harddrive (which is plugged straight into the router) to my TV. The WDTV has a "Network Shares" section and my PC and harddrive usually appear here.
The only way I can get them to show is to reboot the router each time I want to use the WDTV player.
Is there a setting on the router which I need to enable/disable which will prevent the network shares drop?
Video streaming was fine until I upgraded the firmware. Is it possible to downgrade the firmware?
View 3 Replies View RelatedI have a philips tv 9000, qnap 210, twonky and e2000. When i using my e2000( wireless/cable) the tv stops playing the vids after 5 min.When i using un very old smc router there's no problem.
View 6 Replies View RelatedTrying to convert a spare router (Linksys E3200) into a wireless access point toextend my wireless coverage. I thought knew how to do this but having a problem.Steps I followed are:1. Disable the E3200 DHCP server2. Change E3200ip address from 192.168.1.1 to something else3. Disable the firewall4.Make wireless settings5. Connect it lan port to lan port with primaryrouter.The problem I am having is that after I finish step 2 the routerreboots with the browser trying to access it at the new ip address. But thebrowser will not connect.I am doing this on a laptop that is disconnected from my network while I am working on the E3200. It is connected byan ethernet cable to an E3200 lan port. I also tried it wireless with the same result. Browser will not connect at any ip address except 192.168.1.1 and then only after I factory reset the beast to regain the 192.168.1.1 ip address
View 3 Replies View RelatedGot my E4200 a month ago, and have since been experiencing problems with movie streaming between my server and my Popcorn Hour A110. All kinds of movies stutters randomly and becomes unwatchable. Streaming of the same movie from my server to my laptop (connected wirelessly) causes no stuttering.
I have been doing some troubleshooting and determined that it is not the server's fault (it achieves transfer speeds of 60+ MB/s through Samba). I have also ruled out the possibility that the Popcorn Hour is the faulty component.
Lastly, I just tried switching from the E4200 to my old D-Link DIR-655. This has effectively removed the stuttering, leading me to conclude that it is the E4200's fault.
I have upgrade firmware of E1500 to latest release to version 1.0.04 and found out bad performance of the router QoS.
View 6 Replies View RelatedI have EA4500 acting as a router on domainless all-Windows network of two XP machines.Unfortunately, EA4500 aggressively grabs the role of the Master Browser (I am talking about Computer Browser Service) on the network (regardless in which order you power the devices up) and then doesn't serve as a working Master Browser - both Windows machines stop listing the network computers in the "Network Neighborhood" and incur massive timeouts when attempting to view the listing.A quick look with 'browstat.exe status' reveals that indeed the router has announced itself as a Master Browser device, but returns errors when you query it.Quite predictably, without the router, both machinces figure out amongst each other who will be the Master Browser and everything works fine. The problems begin only when you add the router to the network.
1) Is there any way to make EA4500 work like a full-blown Master Browser (the one that not only announces itself, but also serves as such)? having a Master Browser integrated in "always-on" router would really improve the predictability of the network.
2) If not, is there any way to disable the Master Browser on EA4500? For now I managed to achieve that by assigning the router to different workgroup name, but this is lame, as I now can't connect a disk storage to the router and use it within the same workgroup.
I've recently acquired a Linksys E1200 router--which is more than a week old--from the recommendation of a friend of mine. The service is great and all, but the one thing that frequently bothers me is the seeming constant instability of my router's model. There are moments when the router performs smoothly, but there is as much an instance because the router doesn't seem to work at all even when the lights (and the accompanying connection) on my modem seem to be working in good order.
I know that a router will always have its problems, but this is really a constant problem with the E1200; and if so, if there's any way possible on how I can be able to "stabilize" the said router's performance.
I've bought a E4200 router because of it's "maximum performance". With the normal settings i have a wireless range of maximum 10 m in the building. after 5m I've got a low signal.I tested a cheap Netgear-router, which had the same range as the E4200 a 125 Euro.Is my E4200 broke or is it just a bad buy? The settings are standard (that shouldn't be the problem, I guess!?)
View 9 Replies View Related
