Linksys Wireless Router :: 9000 Cannot Get To Free Ports
Jul 29, 2012
I am in a small office and we have a Buffalo NAS being used. Configuring it was fairly easy, but recently it just stop letting us have web access. My External and Internal Ports were 9000, but for some reason now my router will not even show that there is a 9000 port and even if I port forward it. It does no good what good possibly be keeping this port invisible after it was being used the last couple of months. I called my cable company and they said they are not blocking it. But right now I cant access the server from a remote location.
View 4 Replies
ADVERTISEMENT
Aug 15, 2011
I'm looking to setup a few ip security cameras in my house and would like to monitor from work. The first thing I did was give the ip camera a static ip on my local LAN 192.168.1.104. I also forwarded port 9000 to this ip. I then went to [URL] to look up my external ip address. I was able to obtain one ip for my router and another for my modem (disconnected router and went direct through modem).
I've since tried to ping my router WAN ip from work numerous times via http://24.x.xxx.xx:9000 and I get timeout errors. I've tried traceroute and it gets close, but times out the last 3 hops. I've had Comcast on the phone many times trying to resolve and needless to say they weren't able to work.
View 6 Replies
View Related
Mar 12, 2012
Have a E4200 with version 1.0.04 firmware.Been trying to open 9000 to access my buffalo media server remotely. Have set up both Single Port and Port Range Forwarding for port 9000.On trying to access media server, get message " could not connect to xxx.xxx.x.xxx:9000"Using online Open Ports Checkers shows this port is closed.
- Tried disabling all firewalls.
- tried range of ports
- Enabled/Disabled UPnP
- tried cisco & buffalo tech support
View 5 Replies
View Related
Jan 28, 2013
i've a cisco asa5505 on adam 6.4 and a dvr i would like to forward the ports 9000 and 85 in order to monitor the dvr from outside?
View 1 Replies
View Related
Dec 2, 2011
I have a philips tv 9000, qnap 210, twonky and e2000. When i using my e2000( wireless/cable) the tv stops playing the vids after 5 min.When i using un very old smc router there's no problem.
View 6 Replies
View Related
Oct 14, 2012
We have a number of sites which have high-speed L2 links which terminate on our L3 switches at each site. The ports are between the sites are placed in routed mode.
I would like to use Jumbo frame between two of the network which will communicate across sites and 1500 mtu on the rest, is this something which is possible?
From my understanding is the mtu is set on the interface therefore if I set the mtu on the L2 link ports on both sites to 9000 then would this cause a problem for the 1500?
View 1 Replies
View Related
Dec 20, 2012
Is there any free DDNS providers that can be used with a EA6500 ?
View 3 Replies
View Related
Jun 5, 2012
dynDNS (dyn.com) doesn't offer any free version of their service anymore. Without using 3rd party firmwares: Is it possible to use other free DDNS services like no-ip for DDNS and if not, will there be an update soon that includes free DDNS hosts?
View 4 Replies
View Related
Dec 29, 2011
Segregate Model STAA1500100 works fine in USB Port of computer but Cisco Connect does not recognize the drive when connected to USB Port on Router. Drive does low beep beep every few seconds. The Router firmware is 1.0.03 build 14.
View 5 Replies
View Related
Jan 28, 2012
So i can only forward 10 ports on my E2000.Example, one game (Battlefield 3) requires 10 ports (TCP and UDP combined).What about my other games? how can one, if possible, add more ports to the router?
View 4 Replies
View Related
Jan 17, 2013
I have a linksys e1200 wireless router and the internet port does work. Is there a way to make one of the lan ports the internet ports?
View 1 Replies
View Related
Jun 12, 2012
I've been really stumped when I decided to start using xbox live. When ever I try to join my friends party I am slammed with a NAT error. For years now I have not been able to forward ports at all. Any port checkers come back with unable to contact your router.I am fairly certain its the router because, I directly plugged my 360 into my modem and everything worked like a charm.I've read on a similar post found here "Similar post" that updating the firmware might fix the issue?
View 9 Replies
View Related
Jul 20, 2011
I have an E2500 and i need to disable the ports on the router. I have a DSL line going in and thats it. I do not want it to be able to accept any wired device and have someone get on the internet. I do not want someone to just take a laptop, with a LAN able, plug it into a port, and get internet. How would i be able to disable the ports?
View 9 Replies
View Related
Apr 30, 2013
I tried forwarding ports 80, 443, 7001, 8888, 9901, and 9911 on my Linksys E1000 router but whenever I check my ports always come back as closed. This happens even why I try to enable DMZ.
View 9 Replies
View Related
Jan 20, 2012
How do I open ports 443 and 80 on my wrt160n v3 router?
View 1 Replies
View Related
Jul 11, 2012
This is my first experience using a Cisco Linksys router. Up to now I've always used DLink. But when my newest Dlink router failed for the 3rd time I decided it was time to find a better make. The Linksys E2500 came highly recommended. The trouble I am having is that I've been using an old DLink DI-604 wired router as a hub to get 3 extra wired ports. But with the linksys router I can't get this to work.. Can this be done with this router and if so, how do I have to setup the routers?
View 3 Replies
View Related
Nov 18, 2012
My LinkSys E2500 wont open my ports, I have tried DMZ mode but it still does not open any of the ports.
View 9 Replies
View Related
May 25, 2012
I just purchased a cisco ea4500 I have set up port forwarding for http, https, rdp. however when I run zenmap and port check it fails says port in use. I have set it up in sigle port forwarding, rang and port trigging. I tried RDP and VPN to machine that is hard wired and it fails as well. My windows server is connected as well however RDP fails on there to
View 9 Replies
View Related
Mar 5, 2013
How do I use these ports?For example if I have a flash USB drive with pictures videos etc will I be able to show play that media on my direct tv system, denone avp, etc when this drive is connected to the router.What other ways can these ports be used. Never seen USB ports on a router so this is new to me.
View 1 Replies
View Related
Apr 3, 2013
I recently joined an ISP support desk and increasingly often come across LAN configuration with a separate "modem" (DSL cable mobem or Fibre/Satellite/Fixed Wireless box - will call all these toys "modems" from now on). I have a bit of an issue understanding the difference between Internet and LAN ports of Lynksis routers (there are other brands too but as the most advanced on the market, Linksys has been given me the hardest time so far).
Let's take WRT-120N as it is one of the most popular Linksys models out there. Basically, I am coming to a conclusion that the 4 LAN ports act like switch ports and cannot have different IP addresses (so as a single WRT-120 device could be a gateway for up to 4 different networks) and Internet port is the one that is getting an address different from LAN port address (gets it from "modem"). If my understanding is right, "modem" must be hooked up only to WAN port to work and if we connect it to one of the 4 LAN ports we cannot access Internet. But is my understanding right or wrong??Also, can these routers have one default gateway address for Ethernet connection and a different one for WiFi?Are there any other differences between Internet and LAN ports?If you get to decide what port to connect the "modem" to does it matter what is the "modem's" physical implementation? (DSL modem, Sat box, etc)I possess X3000 home gateway myself and have a similar question about it's Cable and LAN ports which I will post in "Cable and DSL" forum.
View 2 Replies
View Related
Mar 12, 2013
I got an Wireless WRT54G now for a couple of years and i'm hosting a game server like minecraft for my self.Today i'd discovered something really weird.If i'm going to my Routor setting at : http://192.168.1.1 i'ts not working , if i restart my routor it works for 1 minute.Now if i start my server he is reading the port [ He said ] but... no-one can join..
View 1 Replies
View Related
Jan 30, 2013
I am trying to open ports 53, 80, 88, 1863 and 3074 for my xbox. I then run PFPortChecker by Portforward and it tells me the ports are not open.
View 9 Replies
View Related
Nov 13, 2012
The last few weeks I've been having problems with my 360 Slim. Sometimes it boots up just fine, other times it wont connect to XBL at all. Some days I have a open NAT, other days I have a moderate NAT.
I have followed the steps on the portforward website. I make a static IP and all that good stuff. I open the ports, using the IP address the Portforward static IP program gives me. After that...My computer stops working. It fails to connect me to any websites at all.I'm running a Linksys ea3500 router.
View 3 Replies
View Related
Aug 23, 2012
I am using remote management to attempt to open port 8889 on my Linksys WRT54G router. I have successfully opened ports 22 and 80 with no problem. Additionally, I can close and reopen these ports without having to physically reset the router. However, if I try to open any other port (I have tried various ports: 23, 100, 8888, 8889, and several others) this port will not open. The ISP this router is connected to is Comcast and according to this site URL port 8889 isn't among the ports that Comcast blocks. I have tried everything I can think of to resolve this issue (short of manually resetting the router or restoring the default settings).
View 9 Replies
View Related
Jan 13, 2012
Is there a wireless router available that will support a free dynamic DNS provider such as [URL], without the need for custom firmware?
I have a device that requires DDNS, and I do not want to mess with firmware updates. I've already bricked a router trying to do that. So I'm looking for a replacement router that requires little to no modifications to use a free DDNS provider.
View 1 Replies
View Related
Mar 24, 2013
I am running a Linksys Wireless G 2.4 GHz Broadband Router Model WRT54G. I am unable to open any ports. I upgraded to the latest firmware yesterday but still am unable to open any ports. I even turned off my Symantec Internet Security Suite Firewall but still am unable to open any ports.
View 2 Replies
View Related
Feb 17, 2011
I just upgraded to an E4200 from a D-Link DIR-655. I cannot seem to get my desktop to connect to the E4200 at 1 GBS. My adapter is set to "auto negotiate" but will only connect at 100 MBS. If I try forcing the adapter setting to 1 GBS, it never connects. I can swap out my E4200 with the DIR-655 and it will connect at 1 GBS just fine. I am using a CAT 5E cable. Is there something I'm missing here or is the E4200 just more finicky than the the DIR-655?
View 9 Replies
View Related
Mar 24, 2013
I am running a Linksys Wireless G 2.4 GHz Broadband Router Model WRT54G. I am unable to open any ports. I upgraded to the latest firmware yesterday but still am unable to open any ports. I even turned off my Symantec Internet Security Suite Firewall but still am unable to open any ports.
View 1 Replies
View Related
Jan 4, 2013
im moving over to VDSL.But now i cant open any ports on the E4200 no mather what i do.It worked with the previous modem, but now i cant open anything. all the ports seems to be closes, 80, 21 etc, and the ports i manually forrward.The previous modem was a ZyXEL P-2602HWT-F3, and the new one is a ZyXEL P-2812HNU-F3.If i connect directly into the ZyXEL P-2812HNU-F3, every ports seems to be open, port 80 is open, port 21 is open, but not on the E4200, and yes, i have tried open the FTP ports.I have tried the 30/30/30 reset on the E4200.
View 6 Replies
View Related
Jan 19, 2012
Have the issue of connecting a pc an NAS to a E4200 and when transferring from pc to NAS, only getting < 10 mbps transfer rates? NAS is Dlink 321. PC has Gigabit ethernet card. cables are cat 6. Even when I force the NAS and pc network card speeds to 1.0 GBps full duplex, I only transfer files at < 10 Mbps.
View 3 Replies
View Related
Mar 5, 2012
How do I go about opening specific ports on an E4200?I'm having disconnect issues with a particular game, and the Customer Service drone thinks the ports required for the game aren't open. Nevermind the fact that it's worked fine for 6 months now, and the problem only started a few days ago.I figured I'd humor the idiot and open the ports, but all I can find is information on forwarding, not making sure the ports are open
View 3 Replies
View Related
Feb 21, 2013
I bought the EA6500 yesterday, to replace my E3200.Formerly, with the E3200, I was able to block applications on the router admin page, without blocking all internet access, under the "Access Restrictions" Tab. I could create access policies that allowed internet access to specific devices, while blocking port ranges/protocols for specific applicatons. while this didn't work for Skype, which jumps from one port to the other until it finds an open one, it worked perfectly for World of Warcraft. the primary target of my restrictions.in common with the old setup for the E3200, the new cloud login allows me to block internet access completely to a device. it also allows me to block websites to my heart's content, an improvement upon the old system, which stopped at four. but to my great surprise, it will not allow me to specify port blockages for specific apps for specific devices., while the new EA6500 is blessed with the added capability of actually recognizing applications by name, *it is only to give them greater priority*. the Media Prioritization tab lets you give a ton of your bandwith to specific apps, but won't let you throttle or block them. Is there some way to work around this? Some alternative firmware? again, I don't want/need to block all internet access to a particular computer. I only need to block some apps (World of Warcraft, and Skype, possibly some torrents) by closing some ports.
View 2 Replies
View Related
Aug 23, 2011
I just bought a e3000 and I have a 24 ports switch. I would like to plug more than 8 pc...how do I proced ? I used to have a dlink router and just plug a cat5e from the dlint to the switch ... but it doesn't work with the e3000
View 5 Replies
View Related
