How to get HTTPS to work for local or remote management? Selecting HTTPS for either local or remote doesn't enable HTTPS for me. It still use HTTP.
View 2 RepliesThe downloadable PDF manual for the WAG160N shows the remote management address as "https://...", while the online support article shows WAG320N screenshots and uses "http://...". The downloadable manuals for the WAG120N & WAG320N don't show either (it's a pretty flimsy manual).point me to, a definitive list of model/firmware combos which do support SSL for remote management?
View 3 Replies View RelatedI have an issue with new Win8 & IE10. When I try to access web management interface of my wrt160nl (Firmware Version: 1.00.01 B15) via HTTPS I'm receiving the foolowing message:"Continue to this website (not recommended)." If I click on it another error page appears:"Certification error: Navigation blocked. There is a problem with this website's security certificate"
At the same time I'm able to acccess the management interface via HTTPS, but from my laptop with Win7 & IE9. There if I click on the red Certificate Error > View certificate and the certificate information is:Issued by: Linksys Issued to: Linksys Valid from : 1.1.2009 to 1.1.2010
So I'd like to know if I could update the router certificate or what settings should I use in IE10 in order to access the web management interface via HTTPS?
bought EA4500 router and successfully installed. The configuration of the desktop i use is - Windows 7 Home Premium SP 1, IE 9.0 and Chrome -23 Dual core Pentium, 2.5 GHZ, 2GB RAM Issue - Many websites, perticularly secured (HTTPS) are not opening up with new router. (Net banking, yahoo mail etc) I didn't face any issue with my old router which is WRT54GH, it is quite old router and did work excellent and working also. I had two calls with CISCO support team, they did check everything and came to conclusion that the issue is with router and asked to get it replaced. I did that but facing same issue. This time i connected my friends laptop to EA4500 along with my personal desktop. My company laptop has following configuration - Windows 7 Enterprise, IE 8.0 Dual core Pentium, 2.67 GHZ, 2GB RAM I tried yahoo mail, net banking websites on my desktop and friends laptop, these websites didn't open in my desktop but no issues faced on friend's laptop. I also noticed that cisco, apple sites are not opening on my desktop but no issue on friends laptop. I tried same thing with my old router WRT54GH, and all sites opened on both the PCs.
View 9 Replies View RelatedIn the settings menu, there is no l2tp in which it was possible to configure a local address of the router. It should be: 10.155.41.41There is an option only for VPN server setup(10.255.255.254), but where it takes a local address that my provder has gave me? - it is not clear. At the same time in the status of the router receives a DNS correctly and the second address embarass me little bet DNS should be:
1) 80.252.130.253
2) 80 252.130.254
first dns is correct, and second one looks like: 80.252.45.86Maybe he does not take a local setting of ip adress via DHCP?
I thought that you're supposed to be able to type myrouter.local in order to get to the router BIOS. It does not work for me; instead it generates a Google search. Is there a way to get that to work?
View 5 Replies View RelatedI just found a slightly unsettling bug in the E4200v2 (running the latest firmware 2.0.36 build 126507).Administration > Local Management Access > Access via Wireless ... set to DISABLED. HOWEVER, when I attempted to access the web interface on a handy iPAD I had absolutely no problem getting through to the web interface (after providing username and passsword).Limiting access to wired clients seems like a simple a prudent measure ... which is why this option is there for the paranoid among us.This seems like a black-and-white bug.
View 9 Replies View RelatedI want to block [URL] from Firmware parental control. But it does NOT work. It works on http site but not the https site.
E3200 Firmware
05/17/2012
Ver.1.0.04 (Build 1)
I am using an E2500 as an access point, which is working fine. I have an Ethernet cable on one of the LAN ports of the E2500 connected to a LAN port on my gateway router. The LAN address of the E2500 is 192.168.7.3 and the LAN address of the gateway router is 192.168.7.1. Clients on the E2500 wireless network have no problems getting to the Internet through the gateway router. Clients on the E2500 wireless network can reach the E2500 local management port at 192.168.7.3 on port 80. On the gateway router I am forwarding WAN port 8083 to LAN address 192.168.7.3 at port 80. But I cannot access the E2500 local management interface via the gateway router. The E2500 should see the request as from 192.168.3.1 due to NAT in the gateway router, right? I can reach any of my actual access points this way, just not a router being used as an access point. Security/design limitation of the router?
View 2 Replies View RelatedI have a small issue with Remote Management on my E4200v2.I have enabled it , select https and set Allowed Remote IP Address to any on the default port ( 8080 ).After all of this, I cannot connect to my router from my office or any other place. I'm using DDNS and all its ok ( updated at time ). I've tried also connecting to my direct ip address ( dynamic ) but with no result.P.S. no incoming log from port 443 using https.
View 3 Replies View RelatedI want to be able to login to a router remotely and foward a port on the router. I thought i saw a spot for remote management but don't know how to use it. I have a dyn account and can create a dns for it.
i setup security dvrs on the internet so clients can see cameras from outside their homes. I would like to be able to login to a router if i need to foward a port or something similar.
Since the EA4500 automatically updates via the Cisco Connect Software, does a copy of the firmware file get saved to the local computer?
View 1 Replies View RelatedMy University has free Internet at student homes, but we need to login by PPTP to get an official, public IPv4 and be able to reach the outside world. The network people at the University says that when the PPTP is up, everything should be open (no firewall of any kind).
have my WRT160NL that gets a 10.10.73.0/23 address from DHCP on WAN port. Currently I have 10.10.74.21. My internal network uses 172.17.17.0/24.My PPTP-server is located at 10.192.1.1 and when I connect, I usually get an IP in the 158.37.73.0/24-range. Currently I have 158.37.73.28. I use DynDNS to make sure I always know the public IP by the host binders.dyndns.info ...
So, I have Remote management enabled with HTTP and HTTPS, any IP and default port 8080. But no response from the outside world seems to go through.If I turn of the "filter ICMP" but keep the SPI Firewall on, I get ping reply from external sources towards my router, but still no HTTP or HTTPS response.I also have a Torrent I try to port forward to to be active, this is 23277, and this is the only thing that keeps coming up in the incoming log on my router.
It's not possible to connect to the routers management over the PPTP-tunnel?And why can't I get the port forward to work .. Same reason? PPTP 158.37.73.28 -> 172.17.17.100 (LAN) won't work?
I have a Linksys EA4500 Router. Both my kids have laptops. I've tried using the Parental Controls to restrict access to certain websites and also to put in timeframes that they're computers can't access the Internet. However, it does not work at all! I've tried turning off their computers and then resetting the router after I made the changes, but the access restrictions do not work. We also have their Xbox set up on the router -- so maybe some of the settings we have for the Xbox are messing up Parental Controls?
View 7 Replies View RelatedI added some files to the hard drive which is connected to EA4500 by USB. I went to the Storage--Media Server Tab and clicked Scan All. I turned on the TV and pointed the DLNA Media Server at the hard drive.
The new files did not show up. They did show up a few hours later. Does the Scan button do anything?
Purchased an EA4500 router. I'm using an old HP 4L laserjet and have it connected to the router via the USB port. I have 2 Mac's and installed vusb on both. I can successfully print from both Mac's, however I have to manually disconnect and connect the printer in the vusb client. I can't get the auto-connect and auto-disconnect settings to work by themselves. Any guidance on the proper settings here?Additionally, do I need to configure the printer driver though the vusb client? When I click "configure", I get an error saying"Cannot connect to Prolific Technology Inc. IEEE-1284 Controller.
View 3 Replies View RelatedI tried to remotely access my disk connected to the USB port of the EA4500 and it failed until I disabled the IPv4/IPv6 SPI Firewall options. Surely, the firewall should not block the router's own FTP server!
View 8 Replies View RelatedI have successfully set up a guest network on my EA4500. Guest laptop associates with guest SSID just fine. Then via IE, it gets prompted for the guest password, which is entered and accepted just fine. At this point guest laptop is on the network.
BUT... at some point the guest laptop will need to reauthenticate (I don't know what the timeout is, but maybe one or two days?). Anyway, it's at this point that IE presents the guest network login page. But now after typing in the password, "enter" or clicking on the button does nothing. It looks like the guest web page doesn't get loaded properly or completely, so the reauthentication can't complete, therefore can't get to the internet. So, while in this state, I've also tried Firefox and Chrome, and same thing, no action when trying to submit the guest password. Tried rebooting guest laptop, and still same problem. Only thing I've found so far that works is to reboot the router. So I'm guessing there's a problem with the guest/web server on the router?? It's a real pain to have to reboot the router every day or two, when I've had other Linksys routers run for months without having to touch them.
I was running CCC 2.1.38 when I first noticed the problem. Since then I've downgraded to Classic 2.0.37, but it seems I still have the same problem. Again, I can connect & authenticate just fine initially, but when reprompted after some period of time, it doesn't work.
I've tried contacting Cisco support, but it looks like I'm at 91 days since purchase and thus outside of my 90-day complimentary support, so they happily provided me with the premium support options just to have the honor of talking with them. Guess I shouldn't have spent so much time trying to figure this out myself.
I'm having a problem with a D-Link DCS932L camera after setting up the EA4500. The manual for the camera can be found here.
[URL]
It worked fine with my old D-Link router. Everything else in the house has not had a problem with the EA4500. There is a certail level of criticality around this camera and, if I can't get it to work, I will have to return the router. I setup port forwarding as 5556 ~ 5559, TCP Protocol (but I tried "Both" as well" with the IP address of the camera. It still doesn't work.I'm IT by trade but not in networking, i.e. I'm not stupid with tech but port wrangling is out of my comfort zone. The setup of this camera with our old router took minutes. I've spent about five hours trying to get it to work on the EA4500.
I purchases a Hauppage USB TV tuner and bought the software that allows live TV signals to be streamed to my home PC or android phone. Once I installed the software and ran a test, the remote access failed. The error message said I need to check the router's configuration. I know very little about configuring routers, but the model is WRT54Gv3.
View 1 Replies View RelatedI have a new E1200 router. I VPN from home to my work computer just fine. since I can remotely access the router from work...what setup section of the router would I need to utilize to go backwards and access my home PC thru remote desktop? NAT? if so what are the instructions to do so.
View 1 Replies View RelatedWe have a RV042. remote management is set to DISABLE - but even after restarting the router i can access the interface remotely over the internet.even when i enable it and change the port to say 5555 i can connect to the web interface using either port 5555 but ALSO on port 80.what's wrong here?the only way to stop that was to create a rule that blocks port 80 on the WAN interface. (btw. could this rule affect LAN users when browsing the web?)
View 7 Replies View RelatedFirst time VPN newbie. I need to set up vpn for a friends small business using RV082 so, as a test, I set it up here at my home using a very basic config. The network topology looks like:
cloud => cable modem => RV082 => DIR655 => win7 PC
At a remote site, I fire up QUICKVPN, enter necessary data and successfully connect. Bring up Remote Desktop and put in the IP of my home pc and the logon username and, after a minute or two, it says "unable to connect to the computer" (or words to that effect). My home PC has been configured to allow remote desktop connections and this has occured in the past but not since the RV082 installation. There is nothing in the PC's logs nor in the RV082's logs.
I am new to the ACE30. I a basic configuration from the CLI and I am trying to use the device manger. I am able to get to the web informational page rather then accessing the login page. I have rest the password for both the admin and www and still no go. my question is how to go into enabling the GUI access.
View 1 Replies View RelatedI am looking to permanently reset the default remote management port of the MODEM DPC3825 to something other than 8080. how to PERMANENTLY change the port from 8080? In the web interface under administration I have several times set it to something else other than the defaulted 8080 but when the modem is rebooted or reset, it goes back to the default 8080.
View 4 Replies View RelatedI'm a bit new to Cisco and i find this AAA a bit confusing..I've turend on AAA by:aaa new-model
Can I use this "default" list for WebVPN ? And what would be a different if i create new "sslvpn" list..Also when I'll be creating user for VPN remote access.. that user will also exist in local database and have access to router via SSH?Because the research I've done it doesn't seem you can group users in different "aaa groups" e.g. user admin belongs under "admin" aaa group which can do ssh to router, users for VPN can only do remote VPN access and not SSH and login into router.i saw ASA has some attribute for users called remote-user
•admin, in which users are allowed access to the configuration mode. This option also allows a user to connect via remote access.
•nas-prompt, in which users are allowed access to the EXEC mode.
•remote-access, in which users are allowed access to the network.
But i can't find this option in IOS on my 1900 Series ISR router.
I am using 3945E Router as Easy VPN Server, with 15.1 IOS. On router I have bunch on usernames for VPN authentication, I want to restrict Router management access for them(ssh,telnet, http and so on).
View 2 Replies View Relatedi'm trying to setup a local DNS server to manage small office local-only domain names for our servers. i have the DNS working properly (resolving local machines and using the ISP dns if it can't). so i put the DNS server ip into the "Static DNS 1" field of the router settings. the other 2 static dns fields are empty.the problem is that the router is still using the ISP dns server as the primary and my local dns server as the secondary. i verify this in two places. first, if i go to the "status" tab, DNS 1 shows the ISP server while DNS 2 shows my local DNS server. secondly, if i connect to the wireless device with a linux-based machine, the /etc/resolv.conf file shows the nameserver ips in the same incorrect order.
View 1 Replies View Relatedwhat would be causing my management HTTPS session to a SF200-24 to suddenly timeout? I receive "The session has been timed out. You may log in again" few mins after logging into to switch.Sometime it happens within 45seconds, other times after 3mins, timouts are not consistent. And, i was not idle when it timed-out. My HTTPs idle time-out is set for 10mins.
I had a continuous PING going to managment IP, and it did not drop any pings when session timed-out.Interface stats are also clean. I tried IE, FireFox, Chrome and all are timming out.
I've changed the HTTP default idle-time out from 1 to 10 and my HTTPs stopped timing out. Management Access Authentication is cleary set for HTTPs, and the Idle-timeout for HTTPs was set for 10mins since install. Yet, adjusting the HTTP idle-timeout cleared the issue.
I'm have serveral issues with my router.First, using port 8090, I'm unagle to get remote management of the router.Port 8090 is forwarded to the router 192.168.1.10 I have other issues too, I think the router is blocking my FTP conenction to my NDAS drives.I wish the router would show the UPnP port that are autoamtically added t othe system.Port 80 works well going to my NDAS drives.Firewall, DoS Blocking WAN are all turned off.
View 4 Replies View RelatedWe are currently looking to upgrade (re-design) our wireless network at our college. Any experience going from a local, controller-based wireless network to a cloud-based controller? If so, what have you found the pros and cons to be?
If you thought about going to a “cloud solution”, what stopped you?
We are currently running wireless at our 3 primary campus locations, and looking to add it to our 3 satellite locations. We use 4402 WLCs at our primary locations with a mix of 1140 and 1240 APs.
I do have problems with remote management of a Wireless Accespoint WAP200.The WAP200 is connected to a router RVS4000 and works well..There are several nodes in the LAN, all static IP, all forwarded in the RVS4000..All nodes can be managed in the LAN as well as from outside..Exept the WAP200, from inside in LAN no problem, but from outside gives a 404 return.I build other similar LAN's, but the same, no connection.
View 8 Replies View Relatedi have router 2911
pub ip: 121.97.65.61-74
interface gigabitethernet 0/1
ip address 121.97.65.61/28
[Code].....
and other ip will drop/kick/disconnected automatically
how to implement this on access list