I installed a new ASA using 8.2.2 version and ASDM 6.2.5 version in contexts mode.When i enable logging for ASDM as debugging i cannot use the real time log viewer because I have an error "Syslog connection Lost. Try restarting the syslog connection", I tried to reconnect using the icon at the bottom but nothing change.
View 9 RepliesI have a new ASA 5510 running 8.3(1) and ASDM 6.4(5)
I am trying to use the real time log viewer to troubleshoot some access issues, but I am getting delays of up to 30 seconds or more between my client connecting to the ASA and the corresponding events showing in the RT Log viewer. I am using a simple filter for source IP as it's quite a busy device.
I've seen an article that says to turn off certain logging IDs (such as 304001 from memory) which I have done, but no different.
Running ASDM V6.3 connecting to a couple of ASA5580's V8.2. After initial configuration everything seemed to work great, however, as of a few days ago I can no longer view statistical information. I can attach to the devices without a problem, view and edit all configuration information but the dashboard applets do not pull or display any statistical info. Resource, Interface, and Traffic status all time out with the error "Lost Connetion to Firewall". The syslog info is not display rather the error "Syslog Lost Connection". My first thought was a java issue on the client. I have ripped out and reinstalled even back-revisioned to no avail. I'm to the point where a dumpe of the management workstation is the next step. I'd like to avoid that extreme if possible.
View 3 Replies View RelatedI'm running into this issue on an ASA 5520 running version 8.2(2)9 and ASDM version 6.2(1).
I have an ACL denying traffic to a certain IP range and the logging level set to Debugging. The hit count is rising quite rapidly but when selecting "Show Log" the Real-Time Log Viewer opens with a value of 0x13d0ee2a in the "Filter By" field and no logs are ever shown.
Logging is enabled globally and Logging Filters on ASDM is set to Debugging as well.
how I can get the RTLV working?
I want to block team viewer using cisco ASA-5585 asdm..
How to block it using regular expression
I have an issue on an ASA 5510 that I have noticed today, when I am using the log viewer all of the information recorded only shows the high end source and destination ports. For example
Source IP 10.10.4.69
Source Port 59886
Destination IP 8.8.8.8
Destination Port 59866
So what seems to be happening is that I am seeing only half of the connection in the log viewer, I see the side with the high end ports and not the side with the ports the application uses, this example was done with a ping. All my services are working correctly and the client sending the ping gets the response expected, it just seems I have lost the logging display?
We have a Cisco ASA 5520 and im looking for a way to monitor largest outgoing and incoming traffic per ip in real time so to know which of my internal computers are using the most of our Internet Line. Is there a way to this through ADSM ? We use version 6.3.
View 1 Replies View RelatedI have an ASA 5520 and I'm using Solar winds real time interface tool to monitor the through put of the port. It seems I can never get it to use more than 100mb, where should I check?
I have run a sh int giga 0/1 and it shows the port is 1000mb full duplex and the I have also checked the other end where it plugs into the LAN and this also says the port is running at 1000mb full duplex.
I have a fresh out the box asa5510 with 8.4 on it.I have built these before but for some reason cannot get this one to work. I am consoled on, have applied the following config but can still not ping to or from, can not asdm, cannot http/s. Arp table shows device it tries to ping, but device trying to pping it has incomplete arp entry. [code]
View 7 Replies View Relatedi have a cisco 1900 series router from the isp and we connect it the our router the rv042 small biz, and we have here a cisco catalyst 2950 switch with just default configuration connected to the hosts.
my problem is from time to time that the connection is lost there is no connection with the router and the only solution is to turn off and on the cisco 1900 router and the connection will be back.
do we need to configure the routers and switches? what do you need to configure?
We have below queries regarding new version of ACS 5.3.
a) Is it possible to view real time logs for AAA clients and for ACS administrator?
b) Is it possible to track each and every change record for ACS Administrators and sessions in ACS . Ex addition and deletion of commands in command sets. As of now, we are able to see that config has changed by ACS admin but not able to see which commands are changed (Added or Removed)
c) As per user guide of ACS 5.3, we have an option for creating customized reports but unfortunately we are not able to see same option in ACS 5.3 GUI. Need confirmation on the same.
d) Is it possible to do configuration changes for ACS via Command line.
I just bought a WAP321 Wireless AP. I wonder why it cannot sync with our time server automatically. Every time I reboot it, the system time become "Fri Dec 31 1999 12:00:00 UCT". I have to do the sync manually by clicking on the "Save" button under the menu Administration > Time Setting.
View 5 Replies View RelatedRecently i have upgraded the IOS of ASA5550 (in HA mode) to 8.4.2 from 8.0.5, after OS upgrade we found that the syslog from thses firewalls are not getting captured/transfered to centralised syslog server. The server is reachable from the firewalls.
View 3 Replies View RelatedTopologies in real time implementation compare and contrast each other?
View 3 Replies View Relatednat global entry not showing up in ASDM but it does via CLI see blow, it's a policy NAT.
nat (inside) 5 access-list inside_nat_outbound_4
global (outside) 5 ************-OUTSIDE netmask 255.0.0.0
Global 5 doesnt show in ASDM 6.1 (5) the globals only go up to 3
I am sending TACACS administration logging to a syslog server. When the messages show up on the syslog server, they are 5 hours ahead of the actual time. Time on the ACS is correct - local logging shows the correct time. Time on the syslog server is correct...all other devices/systems sending syslog messages to it are coming through with the correct time. why the ACS syslog messages would be 5 hours ahead?
View 3 Replies View RelatedI have a 5520 ASA running 8.2(1) and ASDM 6.2(1). The ASA has been running for 223 days without issue. Today it stopped showing real time status on the Device Dashboard from within ASDM. All of the graphs state "Lost connection to Firewall."I try to manually reconnect but it will not. I have tried on a couple different computers and cannot get the monitoring connection to work.It is a very busy firewall and I will have to schedule for a restart (which I was thinking of doing) even though I do not see a memory issue as per snip below. I don't want to restart unless it is the best option.
View 13 Replies View RelatedI was logged into our ASA 5505 via ASDM-IDM Launcher (everything was working) and when I tried to update a change later on today it was unable to send the request. I tried to ping the device and the request timed out. The internet is still working, the VPN connections are still up. But I cannot connect into it anymore.
View 4 Replies View RelatedI have a ASA5505 and I'm having trouble to achieve the following setup, block any kind of connection from outside except for IIS on port 80 and 443 but allow from the server to access any outside address, by domain or ip. Right now apps writen in C# on the server are throughing socket errors and Teamviewer remote control is not working, I would like it to replace remote desktop.
View 3 Replies View RelatedI have a newish instance of 5520 running. I am seeing some odd logging issues in that the logs are significantly delayed showing up in the real time viewer. I'll try to connect, say on remote desktop, and will not see the traffic in the viewer for up to 20 seconds or so after I'm already connected to the server. I have not seen this before.
View 1 Replies View RelatedI changed a configuration and suddenly I lost the internet connectivity... Result of the command: "show running-config"
: Saved:ASA Version 8.2(1) !hostname ciscoasaenable password qVQaNBP31RadYDLM encryptedpasswd 2KFQnbNIdI.2KYOU encryptednames!interface Vlan1 nameif inside security-level 100 ip address 192.168.1.1 255.255.255.0 !interface Vlan2 nameif ATT security-level 0 pppoe client vpdn group ATT ip address pppoe setroute !interface Ethernet0/0 switchport access vlan 2!interface Ethernet0/1!interface Ethernet0/2!interface Ethernet0/3!interface Ethernet0/4!interface Ethernet0/5!interface Ethernet0/6!interface Ethernet0/7!ftp mode passiveclock timezone EST -5clock summer-time EDT recurringsame-security-traffic permit inter-interfaceobject-group service DM_INLINE_TCP_1 tcp port-object eq ftp port-object eq ftp-data port-object eq wwwaccess-list ATT_access_in remark Linkstation Accessaccess-list ATT_access_in extended permit tcp any host 99.23.119.78 object-group DM_INLINE_TCP_1 access-list ATT_access_in remark Linkstation
[code]....
I have a Cisco ASA 5520 that we was working properly. I tried to create a VPN IPSEC to test but when I finished the wizard I lost the conection between the inside interface and outside. I use other interface for DMZ and other for printers network but this adapters are working properly. I have reviewed the NAT's and the ACL's but I don't see the problem?
I have delete the VPN IPSEC but it's still not working and I have the network down
I 've got some problem with my Mail Server since I've migrated to an ASA5510.Actually the server is in a DMZ with a private Ip ( 10.x.x.2) and it is translated to a Public IP ( 194.x.x.65).Some Users received in there mailbox a system administor error message :Object : Impossible to deliver : testYour message could not be deliver to one or more of its recipients: 421 SMTP connection went away!When they try to re sent it some times later, message is sent whithout problem.
View 3 Replies View RelatedHardware: RV082 V03
Firmware: RV0XX-v4.2.1.02
Lan: 192.168.1.0/255
Static routing: 192.168.1.239 to 172.25.152.64/224
The unit is configured as internet gateway. 4 NAT ports are active. When firewall disabled all works fine. When firewall enabled I do get connection lost at random interval. In firewall only 4 rules added to the default 3 rules. The added rules are:
1/ permit 192.168.1.22 port 25 to any
2/ permit 192.168.1.27 port 25 to any
3/ permit 192.168.1.10 port 25 to any
4/ deny any port 25 to any
I do get at random times connection lost when navigating with windows explorer on a PC with IP 192.168.1.x to a share on a PC with IP 172.25.152.74. The same happens when copying files. Sometimes it works, later it fails or reties are needed. When the firewall is switched off all runs fine.
Ping from 192.168.1.x to 172.25.152.74 allways give a <1ms response
Is there a RV082 perfomance problem or do I have a configuration problem?
ASA v 8.2What does the ACL hit count count ? I always thought that the acl hitcount counted the numbers of packets hitting that line in the ACL, however that is not the case. if I setup a icmp permit rule then that will only increment 1 even if I send 4 packets that hits the line. udp and tcp seems to do the same. is there some way I can make the ACL actually count the packets that hits ? where can I learn more about this ?
View 4 Replies View Relatedif ASA 8.3 uses real IP address in ACL, why in this example "ASA 8.3 and Later: Mail (SMTP) Server Access on Inside Network Configuration Example" uses the public (natted) ip address for the smtp server ACL?
View 6 Replies View RelatedI have a d link dir 615 "ipv6 ready". My internet provider give tome a native ipv6 /48. I configure the router with my ipv6 /48 address the internal propagation of the address is good.
On the status ipv6 page all seems OK marked "connected" but I can't have an ipv6real connection and my provider say to me that i am not connected.
Is there a known problem of connection between an public /48 and the internal /64 and if so could it be corrected.
in the ASA Migration Guide for Version 8.3 says about real ip address: "All of the access-listcommands used for these features are automatically migrated unless otherwise noted"
But my ACL's have not been migrated to real ip address. In my migration log:
INFO: NAT migration completed. Real IP migration logs: No ACL was changed as part of Real-ip migrationWhy?So, do I have to migrate them manually?
So in the past from 8.2 down I had one to one NATs like so
static (inside,outside) A.A.A.A B.B.B.B netmask 255.255.255.255
but for 9.1 im running now I need to do this
object network obj-B.B.B.B
host B.B.B.B
nat (inside,outside) static A.A.A.A
So if I make an ACL to permit outside public access to the public IP (A.A.A.A) in 9.1 do I use real B.B.B.B ip address or the object itself obj-B.B.B.B?
I have the following situation. A colleagues installed a spam block (Norton something) and he put two ip's on itsinterfaces. 192.168.2.20 and 192.68.2.21. One will be used to receive and one to send mail but both on port 25. They use a sinlge real IP 175.75.67.32. I am using a 5540 ASA with 8.2 IOS.
I am pretty sure this cannot happen but i got some advice to NAT the outgoing IP/Port and then PAT the incoming port to both IP's and it will work. I tried to do it with no success. I know that ASA 8.4 changes everything in NAT/PAT but is there any way with the newer OS my setup can work or not?
I am forced to upgrade my ASA 5520 software from 7.1 - 8.2 or higher, as I am not familiar with ASA I need expert opinions.I have following concerns regarding the upgrade.
1-Do I need to worry about the software licensing when I download 8.2
2-I read about the few difference in commands (ACL and NAT) in 8.2 what exactly I have to do here should I change the configured NAT and ACL with real IP in the existing configuration after the upgrade ?
Is the WAG320N iPv6 compatable ? ,or could it be with a firmware update ?.Is the X2000 in the same boat in iPv6 terms as th WAG320N ?.Is there a way of retrieving "UPTIME" / "DSL connection time" information from the WAG320N and also line attenuation stats etc.Wouldn't need the above but poor isp needs keeping an eye on.
View 3 Replies View RelatedAdd the ability to send syslog events to multiple syslog servers in the SA500 Series routers. I know the functionality is currently in the RV220W because we utilized it. It would be great if you could configure the syslog servers by event type as well. For example, being able to send the kernel events to syslog server A, and all other events to syslog server B.
View 0 Replies View Related