Deleting File From One Computer To Another?
Jun 8, 2011How do I delete a file using command prompt from one computer to another....
View 5 Replies
ADVERTISEMENT
Cisco WAN :: Sup2T Not Booting After Deleting Vlan DAT File
Sep 18, 2012We have recently purchased new Sup2T to replace the Sup720. When we tried to copy the vlan.dat file across we are facing this issue. Sup2T is not booting up once delete the original vlan.dat file of the Sup2T & reload. Here is the console output during the process. What to do to get this Sup2T working.
[Code] ......
Internet Is Not Working After Deleting An Account On Computer?
Apr 27, 2013I recently deleted an account off of my computer, it was just the account I didn't use that had no password, it was not the admin or administrator account. So I deleted it, and went to bed, I woke up the next day and my computer was just finishing installing an update, after it restarted my internet does not work and it has the yellow caution triangle over top. I troubleshooted, and got the message "windows could not automatically detect proxy settings"When I open network and sharing center it would say "identifying" forever and not identify I guess.The weird thing is, my sisters computer and my old computer can connect to the internet fine. I tried bringing my computer next to the router/modem(not sure of the difference) and i plugged the ethernet cord directly into the modem/router into my computer, and it's the same thing. The most annoying thing is that i cannot do a system restore as i have not set it up before hand.(yes i know that is a very novice mistake
View 2 Replies View RelatedCopy File Of Remote Computer To Another Through CMD?
Feb 12, 2012How do i copy file of a remote computer to another remote computer through cmd
View 1 Replies View RelatedSave Emails To A File On Computer?
Mar 19, 2011I want to set up a file to save some of my e-mails. I am on google g-mails and use Windows xp Is there any way that I can transfer these e-mails to a file so that I can read them at a later date and also when a new one comes just transfer it to this file.
View 2 Replies View RelatedBatch File For Remote Computer?
Sep 26, 2011 i'm trying to write a simple batch file to make my life easier. We have a few dozen Aix Boses that we telnet into and about 70 as400 Swift systems we telnet into. i was starting on a batch file like the one below where i could run it, type in the system and it log me over.What I want to add is for it to put in my user name. (if i could draw a password from a excel file that would be fantastic but id settle for just my user name). I have tried - l (username) at the end of telent and it didn't work. also tried -a. i keep getting the box with user name/password and there both blank. how i can get it to type in my user name?
here is my script.
@echo off
set /p name= What system are you logging into?
telnet %name%
i tried start script.vbs as another attempt using this info
Set cloner = CreateObject("WScript.Shell")
cloner.run"cmd"
WScript.Sleep 500
cloner.SendKeys"telnet %name%"
cloner.SendKeys("{Enter}")
WScript.Sleep 500
[code]....
Unable To Access A Folder / File From One Of The Computer
Jul 21, 2011I'm having Local Area Network(LAN) with 10-15 client computers connected to three servers. And I've folder containing files in one of the servers which I can access and proceed my daily downloading and uploading activity.Due to Virus I've formatted some of the client computers and re-installed everything. Now the problem is I can get Ping Command request successfully but can't access that folder from the clients instead it's been asking for username and password. Also, that username and password is not working even if used it.
View 8 Replies View RelatedShare File To The Other Computer Using Local Area Connection?
Jul 7, 2011How to share my file to the other computer using local area connection..
View 1 Replies View RelatedD-link 655 Slow File Transfer From Wireless To Wired Computer
Feb 23, 20121 newer build computer connected to D-link 655 via Cat6.1 laptop computer connected to same D-link 655 via Wireless N minicard. (Intel) (130Mbps connected) Router on a 10 foot shelf, always have full bar in wireless strength on 2nd computer.
Both computers can upload and download as expected from the internet. Transfers between the two computers though are slow. Both computers are loaded with Windows 7. Transferring files to or from the laptop transfers at 1.5MB/sec to 2 MB/sec.
Setting Up A Home Computer As A File Server Connected To The Motorola Router?
Jan 12, 2012I have a network that is currently set up in the following way:Modem -> vonage Motorola router -> wireless router Most computers are hard wired to the Motorola router. Some other ones connect via the linkseys wireless router. All computers are able to connect to the Internet. The problem I have is that I will be setting up a home computer as a file server connected to the Motorola router. The network acts as though it is two meaning that computers on one router can't see computers on the other router. What steps should I take in order to make all computers accessible through both routers.When I type 192.168.1.1 from a computer on the Motorola router, I get nothing, when I type in my actual ip address, I get the Motorola router. When I type in 192.168.1.1 from a linkseys connected computer, I get access to the linkseys router.
View 3 Replies View RelatedCisco Wireless :: 1130AG Cannot Copy Large File From A Share To Computer
Sep 15, 2010we just deployed a cisco wireless solution with WLC4404-100, WCS, and a bunch of 1130AP and I experience some problem with file copy under windows xp. The file copy is working fine with my Ethernet connection however.The symptom is as follow. I cannot copy large file from a share to the computer. The copy starts then after a while (let's say 30MB copy over a 100MB file) it stops with the error 'File copy error: The network name is no longer available'. When this occurs, I still have my wireless card connected and I can ping my computer from the controller.I tried to adjust some radio settings (channel, power on the AP I'm connected to) because we have a large wireless network here, but no success. I also update the wireless card driver, create a new SSID, etc. No success at all. However the copy went fine for small file size.
View 9 Replies View RelatedLinksys Wireless Router :: EA4500 Does Copy Of Firmware File Get Saved To Local Computer
May 25, 2012Since the EA4500 automatically updates via the Cisco Connect Software, does a copy of the firmware file get saved to the local computer?
View 1 Replies View RelatedDeleting Access Points From The Wii?
Dec 5, 2012I would like to know how to delete a connection from my network. When I connect to the Wii it automatically chooses the right connection. What I have noticed though is that there is a third connection for a printer that is not secured and I have no idea why it is there or has an option to connect to the internet.
View 4 Replies View RelatedCisco :: LMS 4.1 Deleting Devices
Feb 14, 2012I recently deleted some devices from LMS. Now, when I run a device credential report, I get the following for the devices that were deleted. Device has been deleted, or is not managed by LMS.
View 1 Replies View RelatedDeleting Port In EtherChannel Group?
Mar 24, 2011We have configuration of Etherchannel in Cisco 6509 connecting to Cisco 6513 switch, both running on CatOS. This is a group of 8 ports in 6509, due to some reasons one port in Etherchannel group went bad. I have disabled that bad port now. Now I have to delete that bad port from etherchannel group (First task) and add a new port to the group ( 2nd task). I have tried many cisco documents to completely delete the etherchannel port, but no use.
View 8 Replies View RelatedCisco WAN :: How To Restore IOS To 2600 After Deleting It
Aug 24, 2011I was trying to erase my lab router 2600 and reset it back to the factory defaults. Well I was able to to reset it all right but I used the erase command which worked a little to well. So now there is no IOS and the router is in ROM mode and I didnt back up the pervious IOS "Nice". So was able to get an updated IOS for my 2600 but I'm trying to install it and don't know how. I was able to get a tftp server app for my windows pc but I'm unsure on how to configure it so I can transfer the new IOS to the router. On the up side I did learn something erasing and reset are to very different things.
View 6 Replies View RelatedServers :: Deleting Site From Google Search?
Oct 29, 2011I have downloaded material to a site many years ago and now that site appears first when my name is typed at Google Search. The problem is that I've written many e-mails to the site manager and he is not answering. Is there any way to delete this site from my Google search?
View 2 Replies View RelatedDeleting Items From Network Places In Windows 7
Jun 14, 2011I am seeing old entries of phantom folders in My Network Places in Windows 7. In XP you could just delete them, but there is no selection for this in Windows 7. How to delete them?
View 9 Replies View RelatedCisco VPN :: Deleting Group Policies In ASDM 7
Mar 14, 2013A bit of a Catch-22 here: I am trying to delete VPN Group Policies but receive the error message that the policy is in use by a particular Connection Profile. When I try to delete the Connection Profile I receive the message that it is in use by a VPN Group Policy..
What else is there to delete or do I have to use the CLI?
Cisco :: Deleting Whole Crypto ISAKMP Setup / Policy?
Sep 27, 2012Just looking at a new clients setup and they have a ISAKMP vpn to the old security company I am trying to remove...I am fairly new to cisco, I actually know how to setup the ISAKMP policies, acl's etc but never had to completely remove one before All I can find is Clear Commands which seem to just flush the config not actually delete any of the policy etc...Its not that urgent as all passwords are changed on the domain and the cisco, the usernames have been deleted as well.
#show crypto isakmp peers
Peer: ** Port: 500 Local: **
Phase1 id: **
#show crypto isakmp policy
Global IKE policy
[code]...
Linksys Wireless Router :: WRT610 Deleting All Files
Aug 16, 2012I have a wrt610n that I've used for years with no problem. The usb drive I've had plugged into it has worked great for a really long time, but it's fairly small. I bought a WD 1TB hard drive, formatted it with the router set everything up. after about a day I tried to upload a file from work and got an error, and it wiped the harddrive clean. I reloaded thinking it was a fluke and everything worked fine for about a month. Uploading and downloading worked fine from where ever I was at, on the local network or over the internet. Then I tried to upload a small file, got the error and all of my files were gone again.
View 1 Replies View RelatedLinksys Wireless Router :: E4200 Seems Deleting Files
Jan 14, 2013I've got the Cisco E4200 v1 firmware 1.0.04I hooked an usb 2.0 enclosure to it running a WD red "NASware" 1TB drive to it.The drive works just fine, brand new, silent, runs cool enough. I'm not saying it's a super-drive, just not complaining of anything.I started using it as a backup drive. File disappear randomly.Gigabytes of files deleted. No power outages nothing happened, the Router is 24-7 on connected to a UPS. So it is the drive, it was never shut off since connected the drive, about a month ago. It only shares connection among a couple desktop PCs a couple laptops a network printer and a couple smartphones, all updated, all clean that is no virus or anythingI removed the drive from the router and plugged it in the computer.Files were there,even though the files in the root were not all there, it must have crashed during the last modifications, although it's bad, and it's also bad that it does not give you a single sign it has crashed.
View 4 Replies View RelatedOpen Network Folders With Different Username / Password Without Deleting Saved One
Mar 23, 2012Sometimes I need to login to server shared folder with different username and password than saved one in "manage network password" or "windows credentials" (windows 7). At that time, I have to delete the previous one in "managed network password", then open the shared folder with new username, again save the old once once it is done.Is there anyway I can just open with different usernames without deleting the saved one? Different users have different privileges in server. Similarly, how to delete temporarily network cached passwords without restarting? I tried net user * /delete but it doesn't work?
View 3 Replies View RelatedLinksys Wireless Router :: E4500 Deleting Media Files?
Oct 2, 2012i sold off my e4200 & brought a e4500 .The e4200 has had a 2 TB W.D external drive attached ,i stream movies to a sat pvr in the .ts format .The problem is i set the e4500 up & it deleted my .ts files not once but 3 times.when i brought the e4500 i did roll the firmware back to the classic non cloud firmware.the third time i had turned the router off & once swtiched back on my files were gone .should i safely remove the drive from the set up ? what if i have a power failure?
View 5 Replies View RelatedLinksys Wireless Router :: WRT610N NAS NTFS For Deleting Directory
Mar 22, 2009I got one issue with the WRT610N and the NAS feature. I am running Vista on a laptop connected to the WRT610N via the 802.11n link but the issue is not here.I have a hard drive of 40GB (but same issue exist with another drive of 500GB) plug to the USB port. I can read all file without any issue. I can also add file without any problem. The problem come when I try to delete some directory. In this case I got the an 0x8007045D Error indicating that I need to have the right permission for doing this. However I do not have any issue in deleting files. In case I delete all files from a directory I can't delete the directory without the error. I map the drive to the windows explorer with the admin account which give read and write access.
View 5 Replies View RelatedLinksys Wireless Router :: E2500 / Deleting A Duplicate Unsecured Network?
Mar 8, 2012In the process of setting-up a E2500 Linksys router, I set-up my secured network which is working fine but also (I do not know how I did this??) set-up the same named network but it is unsecured. How do I delete this unsecured network.Do I need to set-up the router again?
View 4 Replies View RelatedCisco :: Avoid Deleting Files From Flash (Switch 2960) No Support EEM
Apr 3, 2012I am looking for ways to avoid deleting files from the flash in a Switch 2960, I found some scripts TCL / EEM but this switch does not support EEM (IOS c2960-lanbasek9-mz.122-58.SE2.bin).
View 13 Replies View RelatedCisco Wireless :: 5508s - Deleting Client Immediately Since WLAN Is Changed
Sep 28, 2010I recently upgraded our 5508s to 7.0.98 I am now seeing this message on the primary WLC while running adebug on a client *apfMsConnTask_1: Sep 29 11:05:36.114: Deleting the client immediately since WLAN is changed.
View 6 Replies View RelatedCisco Switching/Routing :: Impact Of Deleting And Creation Of SVI Interface On PBR 6513
Apr 22, 2013I have a query regarding the deletion and creation of one of my SVI interface on 6513 ,The reason behind it as follows.My traffic get to Internet in this manner
proxy(external int.)[IP:192.168.1.30] --> Gi0/9[6513 in VLAN 170] --> SVI VLAN 170[IP:192.168.1.10] --> Gi0/10[In VLAN 170] -->ASR[IP:192.168.1.20],I need to assign this VLAN ie 170 to my inside interface of firewall but it was mentioned in books like this "Assign the VLAN for the FWSM before it is applied to the MultilayerSwitch Feature Card (MSFC)." so I am thinking the following steps to assign VLAN 170 to firewall group first before creating SVI Interface for it
1.Remove all currently assign ie Gi 0/9 & Gi0/10 interfaces from this VLAN and then delete this VLAN.
2.Create the same SVI ie VLAN 170[IP:192.168.1.10] by this way the issue can be resolved.
As in part of my configuration PBR is define like this .
interface Vlan170
description "PUBLIC IP VLAN"
ip address 192.168.1.20. 255.255.255.0
ip policy route-map NAT
route-map NAT permit 10
match ip address 101
set ip next-hop 192.168.1.10
I need to clearify what impact it may have on PBR part if I delete and create the VLAN 170.Will the traffic move to the inside interface of FWSM.
Cannot Access File Because Another Process Has Locked Portion Of File
Jul 26, 2011I am working on a Drupal site which is on a virtual server (the way it's been explained to me). I've been told I need to work with it through webdev. So I can copy a file off the server and onto my local machine. I make my edits and then try to upload it to the server. I get locked out with the message: Error 0x80070021: The process cannot access the file because another process has locked a portion of the file. I have tried shutting down my code editor, opening and closing the connection, tried different methods of reaching the server (Cyberduck and through Window's map network feature) to no avail. What can I do?
View 1 Replies View RelatedCisco Firewall :: ASA 5505 - Cannot Add Rule Without Deleting Implicit Rule
Jan 18, 2011what is the purpose of the "Permint all traffic to less secure networks".
Well I know the purpose and the technique to handle some sercurity level is nice. when I cannot add add a rule without deleting this implicit rule?
The technique of security level is then obsolete?
Wireless Computer Internet Speed 16mbps / Wired Computer 0.4mbps
Mar 24, 2011I am with Virgin media (UK) and have the 20mbps fiber optic connection. My area has recently been having problems with the broadband and Virgin has recently fixed these problems. However I used to get around 19mbps now that the problem is fixed my computer which is wired to the router gets about 0.4mbps downstream... However the 5 wireless computers all get 16mbps which is pretty good for them. Windows tells me that its a firewall issue and I currently can't use two programs, spotify and steam. They both have firewall issues, even if I turn off my firewall which is the windows one. I also have avast, and when I turn that off, still no good. I used OpenDNS, stopped using that flushed my DNS, that didnt work. I tried to optimize my computer settings, by changing various values in Regedit.All of this has done nothing. I should add that I have recently re-installed Windows 7 so on this fresh install it has never had decent internet speed. Which I thought was weird.. I have basically had these problems since the fresh install. All of my drivers are up to date.
View 10 Replies View RelatedPrint To A Printer On A Computer Via Wireless From Computer Via Ethernet?
May 22, 2012I have a netgear router, the pc I want to print from is connected via ethernet strait to router with Vista Ultimate OS. The computer the printer is hooked up to is connected via usb wireless adapter with Windows XP OS. Can I print from my computer hooked up via Ethernet from the computer that is hooked up wireless.
View 4 Replies View Related