I am seeing old entries of phantom folders in My Network Places in Windows 7. In XP you could just delete them, but there is no selection for this in Windows 7. How to delete them?
View 9 Repliesmy network places on winXP is empty when i 'm in lan with 14other pc using a switch.
View 1 Replies View RelatedI have a small business network computers w/a linux server. One computer was infected with viruses which I removed via kaspersky/norton/malware anti-bytes. I run windows xp professional on this computer.However I run into the following problem:
1) In my network places the documents on the server do not show as a network place-this is despite me being able to access these documents via a folder shortcut
2) After I open the network files/folders from the comp, I am unable to use the find feature because the folder is not listed under the look in drop box. I tried changing workgroups and ran into the same problem.
How do I audit a network PC to see what it has on it or delete what does not need to be there. If I do it through the Windows add or remove they re-install. In the old days I could do it in DOS and then 'Tree' to list the properties and then delete what I wanted permanently.
View 1 Replies View Relatedive got 2 laptops on my wireless network and have just bought a pc. it dosnt seem to be finding my connection so i cannot get it onto my wireless network?
View 1 Replies View RelatedI reset my Dlink 615 wireless router. I held down the power and reset for 30 seconds and rebooting the system with the disc. I did change the router name, but believe everything else stayed the same. My desk top is working fine being "hardwired" but nothing wireless will connect.
I did see this time it installed Network Magic which I have since uninstalled and again rebooted the computer system and still cannot get the wireless to work. It shows the network available, but my password for some reason does not take.
laptop running xp pro sp3 Pc running xp home sp3.After re-boot or re-start,can access my network places on the laptop.But only once.After,that,will not open my network places.I have tried to open/explore the folder with explorer,it will display contents but not open the shared file selected.The pc can display laptop's my network places folder,but will not open shared file on the laptop.
View 3 Replies View RelatedI have 2 wired desktops and 2 wireless laptops on a small network. Both desktops are running Windows 7. Laptops are with Vista. Everyone has internet accessFor some reason neither wired computer can see the other in the network places window. But both can see the wireless laptops. Network discovery and file sharing are all on and workgroup names are the same.
View 6 Replies View RelatedI HAVE TWO COMPUTERS running Windows Xp that are CONNECTED TO A ROUTER THEN CONNECTED TO A MODEM, COM1 THE INTERNET WORKS FINE, AND IS SHOWING A LAN CONNECTION WORKING, AND INTERNET GATEWAY CONNECTED, AND THE ROUTER SHOWS UP ON THE MY NETWORK PLACES. ALSO MY WIFI WORKS FINE TOO! BUT COM2 CANT SURF THE WEB, IT DOES NOT RECOGNIZE THE ROUTER IN MY NETWORK PLACES, AND THE INTERNET GATEWAY IS NOT SHOWING UP IN NETWORK CONNECTIONS, BUT THE LAN IS, AND IS SHOWING A CONNECTION. i have tried restarting everything, i tried connecting the COM2 straight to the modem, tried new either cables, nothing wrong with my service or modem or router, its just the COM2
View 7 Replies View RelatedWorkgroup computers are not shown in my network place....
View 1 Replies View RelatedI am unable to view windows 7 HP systems in my network places on a windows server 2003 domain. How do I rectify this?
View 3 Replies View RelatedI am having trouble setting up mapped network drive or folder. My server and workstation are set up on a domain with windows server 2008 r2. The server only shows up on my workstation(windows 7) when I put in \server in the search. It pops up then on the left hand side but not in the main window. When I go back to my computer "map network drive" I hit browse and still the server does not show up under the network (but my computer does). When I try to do this on the server, I go to map network drive and nothing shows up under the network. I have even gone into group policies and mapped the drive that way and still nothing shows up.
View 1 Replies View RelatedI have been using FrontPage 2003 successfully and recently as of 2 days ago...I wanted to edit the website and the files are ALL missing. UGH!!!! Its very frustrating that I cannot edit the website now and we are missing valuable information. I did see the files when I created a new Network Place with the prefix but I cannot edit and save to our website. Now I did ask MyHosting administrator but they are seriously taking longer to get back to me then needed. I can open Front Page, but of course, cannot publish anything to the website. More so, even just opening the files in server.com is the actual issue because I cannot change the website page. That's the files I need to change in Front Page. I did go to my account settings within myhosting server to the File Manager and YES! I could see all the files....but again I cannot save anything to the website or publish..I DID NOT DOWNLOAD anything over the past few days and have not gone to unauthorized websites that would have provided a virus. Everything else works fine.
View 1 Replies View RelatedIn my computer. My network places properties did not see lan card.But the device manager lan card driver is enable but it did not appear in the my network place how it enable .
View 6 Replies View RelatedSometimes I need to login to server shared folder with different username and password than saved one in "manage network password" or "windows credentials" (windows 7). At that time, I have to delete the previous one in "managed network password", then open the shared folder with new username, again save the old once once it is done.Is there anyway I can just open with different usernames without deleting the saved one? Different users have different privileges in server. Similarly, how to delete temporarily network cached passwords without restarting? I tried net user * /delete but it doesn't work?
View 3 Replies View RelatedDesktop
Windows 7 64-bit -> cable directly to router
Laptop
Windows 7 64-bit -> wireless
Laptop
Windows 7 64-bit -> wireless
Playstation 3
-> Wireless
Xbox 360
LAN cable from router to 360
Scientific Atlanta 2203C modem to a Cisco Linksys E3000 wireless router.Ok, so if I turn everything on I can see all computers from all computers, but after a few hours/days (random time) everything disappears, and I have to unplug the router and then everything is back. Is there a way to stop this, and just have everything just be there all the time?
Code:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersJohn>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : John-PC
Primary Dns Suffix . . . . . . . :
[code]....
In the process of setting-up a E2500 Linksys router, I set-up my secured network which is working fine but also (I do not know how I did this??) set-up the same named network but it is unsecured. How do I delete this unsecured network.Do I need to set-up the router again?
View 4 Replies View Relatedin my run promt i can only run cmd.other commands are not worked
View 1 Replies View RelatedI'm in need of a device which can switch to several items which has the same mac address. I heard that there may be devices that can handle this, by for example mapping fake unique mac addresses in the switch to each on of the same mac addresses on the devices, so when you try to send something to a "device with the same mac address" you send it to the faked address in the switch and the switch just forwards it.
View 1 Replies View RelatedI'm in need of a device which can switch to several items which has the same mac address. I heard that there may be devices that can handle this, by for example mapping fake unique mac addresses in the switch to each on of the same mac addresses on the devices, so when you try to send something to a "device with the same mac address" you send it to the faked address in the switch and the switch just forwards it.
View 1 Replies View RelatedI got a config of a SoHo96 router, which has an IPSec Tunnel configured. Now I need to understand what's configured there and it seems that the parameters that aren't being explicitly set, do not show up in the config. Thus, I have no clue about DH Groups, Keylife times and other nice things.How do I reveal the "missing" configuration items?
View 3 Replies View RelatedI know its probably got something to do with EIGRP no auto-summary, I was wondering if I could get some input as to why a route would change from being variably subnetted, which is usually the case until no auto-summary is deployed. Or am I totally lost? I attached a screen shot for a closer observation.
View 1 Replies View Relatedmy dad wants me to get on expanding our home network (getting wireless into other places in the house). i do consider myself pretty tech savvy ( i just built my computer from scratch) but this is a little bit beyond my comfort zone. the 4 ports on the router are keeping me tied up and the size and layout of the house are restricting the wireless range
provider: comcast cable
modem: arris TM502G (comcast provided)
router: linksys wireless-n wrt160n v3
4 pcs running windows xp to windows 7
3 laptops running xindows xp, windows 7 and windows 7 starter (netbook)
1 xbox 360
1 ps3
(looking to add netflix capable bluray players on 2 tvs in the future)
the downstairs layout (router is the star)
the upstairs (red is range of current setup thats a stretch) (blue wanted coverage)
not to scale and a quick draw the top half of the house is off set from the basement area. i used google earth to estimate the range from the router to the outside area of my wanted coverage area and its roughly 80 feet through 4 walls and the flooring i do not believe theres a single router capable of doing that without dropping some serious cash down.as is all the ports are currently tied up, and id like to expand the number of ports, along with getting wireless to the area i pointed out, i have the capability of pulling hard wire through out the house also.
how to link 3 different places where 2 of them have internet DSL connections.Actually Im running this layout...
Place 1:
DSL Modem connected to "Router 1" with DHCP Enabled. 192.168.1.1 and static IP assigned for every element in the network.
"Router 1" got this:
LAN:
2 computers
[code]....
At this point everything is working fine. Computers in "Place 1" can see computers in "Place 2" over network and share files and printers. Plus "Place 2" have internet from "Place 1".I want now to link "Place 2" to a "Place 3" using the same Nanostation M5 antennas and I can do it the same way I did Place1-Place2, BUT, what about "Place 3" router? it is connected to a DSL modem. "Router 3" should be DHCP Disabled too? What about the internet connection? I would like "Place 2" in the middle would be able to take the internet connection from both Place 1 - Place 3. It can be done keeping computers sharing files and folders between all 3 places?
How do I delete a file using command prompt from one computer to another....
View 5 Replies View RelatedI would like to know how to delete a connection from my network. When I connect to the Wii it automatically chooses the right connection. What I have noticed though is that there is a third connection for a printer that is not secured and I have no idea why it is there or has an option to connect to the internet.
View 4 Replies View RelatedI recently deleted some devices from LMS. Now, when I run a device credential report, I get the following for the devices that were deleted. Device has been deleted, or is not managed by LMS.
View 1 Replies View RelatedI'm not sure if this is even possible, but I'm currently changing from saving my documents on my desktop to a server. However, I like working with files from my desktop for ease of use. Is there any way to save a document in the server, while working with the document as it exists on my desktop (e.g. set the file up to save in two locations)?
View 1 Replies View RelatedHave found my self with Big signal loss in some parts of my house. I was recently given a Router and i thought i would use this as an acess point to extend / boost the range of the dead spots. I Then was looking on the Huawei's setting and switched off NAT and the Firewall and tried again.Both Plugged in and Wireless. I have seen a lot of threads on TalkTalk fourms of people doing this but none have the issue i am having.
View 3 Replies View RelatedWhy I can't acces the internet in public places with my laptop.
View 1 Replies View RelatedWe have configuration of Etherchannel in Cisco 6509 connecting to Cisco 6513 switch, both running on CatOS. This is a group of 8 ports in 6509, due to some reasons one port in Etherchannel group went bad. I have disabled that bad port now. Now I have to delete that bad port from etherchannel group (First task) and add a new port to the group ( 2nd task). I have tried many cisco documents to completely delete the etherchannel port, but no use.
View 8 Replies View RelatedI was trying to erase my lab router 2600 and reset it back to the factory defaults. Well I was able to to reset it all right but I used the erase command which worked a little to well. So now there is no IOS and the router is in ROM mode and I didnt back up the pervious IOS "Nice". So was able to get an updated IOS for my 2600 but I'm trying to install it and don't know how. I was able to get a tftp server app for my windows pc but I'm unsure on how to configure it so I can transfer the new IOS to the router. On the up side I did learn something erasing and reset are to very different things.
View 6 Replies View RelatedI want to open a branch office but need to access the same server as in the main office.How do I do this without losing speed?
View 2 Replies View Related